Lab furniture, fumehood and accessories

Furniture/Furniture & Fume Hood

NPC Laboratory ROOM NO.-228

BENCH TOP- AUTOSASH FUME HOOD (5’)

Overall Dimensions: 1500 mm W X 900 mm D X 2300 mm H (approx.)

Inside Fume Hood Working Volume: 1220 mm W X 660 mm D X 1180 mm H (approx.)

Bed size: 1220 mm W X 660 mm D (approx.)

Worktop height from the ground level: 795 -800mm (approx.)

FUME HOOD SERVICES

FH Front Control Valve For Comp. Air

FH Front Control Valve for Nitrogen

FH Front Control Valve for Vaccum

FH Front Control Valve for Chilled water In

FH Front Control Valve for Raw water

FH Front Control Valve for Chilled water Out

FUMEHOOD INTERNAL PIPING

Fume hood internal piping for 6 Nos. services upto 6" above false ceiling.

FUMEHOOD LIGHTING & SWITCHES

FR PVC insulated copper conductor, single core cable in FUME HOOD lighting & switches, sockets, including Wiring (1.5 Sq.mm FRLS) for light point and (2.5 Sq. mm FRLS) for Switches. (Cable approx 30 mtr.)

GRANITE HOOD WORK SURFACE

Granite hood work surface of L=124MM, D=787MM, THICKNESS=25MM.

CUP SINK

Poly over "PP" Cup sink black

ACCESSORIES

Apparatus Storage Base Cabinet (castors)

Solvent / Acid Storage Base Cabinet (castors)

Lattice Assembly(Apparatus Holding Grid)

Airflow monitor AFA 1000/1 (Digital) TEL UK

Complete as per T.S

BLOWER MOTOR & ACCESSORIES

3HP/4P Motor with Centrifugal Blower -Medium Pressure Direct Driven PP moulded Centrifugal Blowers including suitable clamp adapter, Electro galvanized stand and 3.0 HP Motors, 1500 CFM, 1400 RPM with DOL Starter for Centrifugal Blowers, base frame, vibration isolators, weather cowl, Stack support, wire mesh for bypass, blower inlet PP flange, inlet & outlet flexible connection for Blowers.

PP/FRP DUCTING & ACCESSORIES

Supply and installation of PP/FRP ducting using 3mm thick PPGL sheets with 2mm thick FRP lining using isothelic resin including necessary bends, reducers, T-connections, upports, flanges, gaskets, nutbolts flanges & bends and inside and outside lab duct supports and enamel duct painting for exposed ducts.

EXHAUST BLOWER PANEL

1nos 63A TP MCCB 25kA with adjustable thermomagnetic release, with door interlocked with release for O/L, S/C ,S/T and ON /TRIP/ OFF (latest ). Meters for measurement of current voltage, 1 nos of ELE(0-8a) with CBCT, Bushbar equally sized three phase and netural aluminium conductors bars, suitable sized to carry 63A current and suitable insulated with color coded heat shirinnk.

ARMOURED COPPER CABLE:

Insulated sheathed steel tape armoured Copper cable with pvc outer sheathing 1.1 KV class, (All cables shall be AS PER IS 7098)

From panel to EXHAUST BLOWERS (1 nos.) of 1.1 KW (3 PHASE) 4 Core, 6 Sqm. cable.

SPOT EXTRACTOR

Alsident System 75 Exhaust Arm (75-6555-3-7-4) Ceiling Mounted 3 red joints, Reach: 1230 mm, including Ceiling Column to hold spot extractor Arm and other assocessories as complete.

GRANITE WORKTOP & SKIRTING

SUPPLY & FIXING JET BLACK GRANITE TOP 20 (±2) MM THICK SUPERIOR QUALITY. THE OVERALL HANGING OF GRANITE IS 25 MM AT FRONT SIDE OF UNDER STRUCTURE. DRIP LINING BELOW THE TOPS AT 15MM FROM THE EDGE

GRANITE SKIRTING; 100 MM HEIGHT'; 20 (±2) MM THICK

C- Frame & Modules Details table wise, size depth 770 (±20) mm, Ht. 900 mm

C-Frame for Island table- Depth-1500mm x 900 mm (H)

C-frame for Wall Table - Depth 750 mm X 900 mm (H)

C-frame for Wall Table - Depth 750 mm X 900 mm (H)

C-frame for Wall Table - Depth 750 mm X 900 mm (H)

C-frame for Corner unit - Depth 750 mm X 900 mm (H)

C-frame for Corner unit - Depth 750 mm X 900 mm (H)

C-frame for Corner unit - Depth 750 mm X 900 mm (H)

Modules on C-frame (570 mm D x 635mm H) approx. (castors type)

One Drawer & Two Shutters- 600mm W

One Drawer & Two Shutters- 750mm W

One Shutter Corner Unit- 900mm L x 900mm W

Filler panel /Closing Panles

900 H Table (side/back panel)

Reagent Rack

Reagent Rack island Table :- 2 Tier Structure with provision for Switch and socket cutout provision. Both shelves will have 3mm friction glass fixing on top. Two shelves of 380 mm depth are adjustable and part will have storage cabinet aggange.

Size:- 2850Lmm x 400/380 + 300mmW x 1200 H

Reagent Rack wall table:- 2 Tier Structure with provision for Switch and socket . Both shelves will have 3mm friction glass fixing on top

Size:- 2850mmL x 190mmW x 750mmH

Sink / Peg Board/Taps / Utility

Big PP sink Outer size: 22" L X 18" W X 12" D & Inner size: 19" L X 15"W X 11" D approx.

Peg Board Big size: 750mm L X 750mm H ( 30 Pegs.) with SS Collection Tray to be fixed MS stand

Worktop mounted handed Eye wash

Two way utility Tap for Com. Air/N2/Vaccum (Far-Italy)

One Way Mixer water Tap- (Far-Italy) (Hot & Cold)

PVC Waste Pipe

Electrical Trunking (Box structure)

Electrical Trunking:- Box structure single side with provision for Switch and socket fittings. (Wall Table)

Size:-1370 Lmm x 120 mm W x 120 mmH

Size:-750 Lmm x 120 mm W x 120 mmH

2 compartment Service Droppers in Lab 300mm L X 100MM D X 2100mm H

Switch & Sockets

Electrical 6 Pin shutter socket with Piano switch including module plate 5/15A , (Northwest/ Norisys Make) With Wiring (2.5 Sq.mm FRLS)

Data Point With Wiring (CAT-6 wire )

Chemical storage Cabinets (CSC)

Floor mounted Full Height Chemical storage Cabinets (Two numbers Toughened Glass door and phenolic resin aminated liner with four adjustable shelves & one fix shelf, with locking system, Size:- 1000Lmm x 450mm W x 1800 mmH

Centrifugal Blower with motor including assocessories complete. (1.5 HP)with DOL Starter for Centrifugal Blowers, base frame, vibration isolators, weather cowl, Stack support, wire mesh for bypass, blower inlet PP flange, inlet & outlet flexible connection for Blowers.

ROOM NO.-229

BENCH TOP- AUTOSASH FUME HOOD (5’)

Overall Dimensions: 1500 mm W X 900 mm D X 2300 mm H (approx.)

Inside Fume Hood Working Volume: 1220 mm W X 660 mm D X 1180 mm H (approx.)

Bed size: 1220 mm W X 660 mm D (approx.)

Worktop height from the ground level: 795 -800mm (approx.)

FUME HOOD SERVICES

FH Front Control Valve For Comp. Air

FH Front Control Valve for Nitrogen

FH Front Control Valve for Vaccum

FH Front Control Valve for Chilled water In

FH Front Control Valve for Raw water

FH Front Control Valve for Chilled water Out

FUMEHOOD LIGHTING & SWITCHES

FR PVC insulated copper conductor, single core cable in FUME HOOD lighting & switches, sockets, including Wiring (1.5 Sq.mm FRLS) for light point and (2.5 Sq. mm FRLS) for Switches. (Cable approx 30 mtr.)

FUMEHOOD INTERNAL PIPING

Fume hood internal piping for 6 Nos. services upto 6" above false ceiling.

GRANITE HOOD WORK SURFACE

Granite hood work surface of L=124MM, D=787MM, THICKNESS=25MM.

CUP SINK

Poly over "PP" Cup sink black

ACCESSORIES

Apparatus Storage Base Cabinet (castors)

Solvent / Acid Storage Base Cabinet (castors)

Lattice Assembly(Apparatus Holding Grid)

Airflow monitor AFA 1000/1 (Digital) TEL UK

Complete as per T.S

BLOWER MOTOR & ACCESSORIES

3HP/4P Motor with Centrifugal Blower -Medium Pressure Direct Driven PP moulded Centrifugal Blowers including suitable clamp adapter, Electro galvanized stand and 32.0 HP Motors, 1500 CFM, 1400 RPM with DOL Starter for Centrifugal Blowers, base frame, vibration isolators, weather cowl, Stack support, wire mesh for bypass, blower inlet PP flange, inlet & outlet flexible connection for Blowers.

PP/FRP DUCTING & ACCESSORIES

Supply and installation of PP/FRP ducting using 3mm thick PPGL sheets with 2mm thick FRP lining using isothelic resin including necessary bends, reducers, T-connections, upports, flanges, gaskets, nutbolts flanges & bends and inside and outside lab duct supports and enamel duct painting for exposed ducts.

EXHAUST BLOWER PANEL

1nos 63A TP MCCB 25kA with adjustable thermomagnetic release, with door interlocked with release for O/L, S/C ,S/T and ON /TRIP/ OFF (latest ). Meters for measurement of current voltage, 1 nos of ELE(0-8a) with CBCT, Bushbar equally sized three phase and netural aluminium conductors bars, suitable sized to carry 63A current and suitable insulated with color coded heat shirinnk.

ARMOURED COPPER CABLE:

Insulated sheathed steel tape armoured Copper cable with pvc outer sheathing 1.1 KV class, (All cables shall be AS PER IS 7098)

From panel to EXHAUST BLOWERS (1 nos.) of 1.1 KW (3 PHASE) 4 Core, 6 Sqm. cable.

SPOT EXTRACTOR

Alsident System 75 Exhaust Arm (75-6555-3-7-4) Ceiling Mounted 3 red joints, Reach: 1230 mm, including Ceiling Column to hold spot extractor Arm and other assocessories as complete.

GRANITE WORKTOP & SKIRTING

SUPPLY & FIXING JET BLACK GRANITE TOP 20 (±2) MM THICK SUPERIOR QUALITY. THE OVERALL HANGING OF GRANITE IS 25 MM AT FRONT SIDE OF UNDER STRUCTURE. DRIP LINING BELOW THE TOPS AT 15MM FROM THE EDGE

GRANITE SKIRTING; 100 MM HEIGHT'; 20 (±2) MM THICK

C- Frame & Modules Details table wise, size depth 770 (±20) mm, Ht. 900 mm

C-Frame for Island table- Depth-1500mm x 900 mm (H)

C-frame for Wall Table - Depth 750 mm X 900 mm (H)

C-frame for Wall Table - Depth 750 mm X 900 mm (H)

C-frame for Corner unit - Depth 750 mm X 900 mm (H)

C-frame for Corner unit - Depth 750 mm X 900 mm (H)

C- Frame & Modules Details table wise, size depth 670 (±10) mm, Ht. 750 mm

C-frame for Wall Table - Depth 650 mm X 750 mm (H)

Modules on C-frame (570 mm D x 635mm H) approx. (castors type)

One Drawer & One Shutter- 450mm W(535 mm D x 535mm H)

One Drawer & Two Shutters- 600mm W

One Drawer & Two Shutters- 750mm W

One Shutter Corner Unit- 900mm L x 900mm W

Filler panel /Closing Panles

900 H Table (side/back panel)

750 H Table (side/ back panel)

Reagent Rack

Reagent Rack island Table :- 2 Tier Structure with provision for Switch and socket cutout provision. Both shelves will have 3mm friction glass fixing on top. Two shelves of 380 mm depth are adjustable and part will have storage cabinet aggange.

Size:- 2400Lmm x 400/380 + 300mmW x 1200 H

Safety Shower

Safety Shower cum Eye Wash with dual action(TOF-Italy Make)

Sink / Peg Board/Taps / Utility

Big PP sink Outer size: 22" L X 18" W X 12" D & Inner size: 19" L X 15"W X 11" D approx.

Peg Board Big size: 750mm L X 750mm H ( 30 Pegs.) with SS Collection Tray to be fixed MS stand

Worktop mounted handed Eye wash

Two way utility Tap for Com. Air/N2/Vaccum (Far-Italy)

One Way Mixer Tap- (Far-Italy) (Hot & Cold)

PVC Waste Pipe

Electrical Trunking (Box structure)

Electrical Trunking:- Box structure single side with provision for Switch and socket fittings. (Wall Table)

Size:-3600 Lmm x 120 mm W x 120 mmH

Size:-1800 Lmm x 120 mm W x 120 mmH

Size:-750 Lmm x 120 mm W x 120 mmH

2 compartment Service Droppers in Lab 300mm L X 100MM D X 2100mm H

Switch/Sockets

Electrical 6 Pin shutter socket with Piano switch including module plate 5/15A , (Northwest/ Norisys Make) With Wiring (2.5 Sq.mm FRLS)

Data Point With Wiring (CAT-6 wire )

Voice Point With Wiring (0.5 Sq. mm FR )

Overhead storage Cabinets

Wall Mounted Overhead File Cabinets (Float Glass Door) in CRCA MS/ GI Structure epoxy powder coated construction, Two Shutter with one adjustable shelf Size:- 750Lmm x 370mm W x 750 mmH (approx.)

ELECTRICAL WORK

ARMOURED COPPER CABLE:

Supply and drawing following sizes of FR LS PVC insulated copper conductor, single core cable in Lab Furniture & lighting, switches, sockets etc. if required

1.5 Sq. mm for switch & socket 5/15 amp

2.5 Sq. mm for switch & socket 5/15 amp

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

20 mm (2mm thick)

25 mm (2mm thick)

Laying of existing / old cable for light point/ PVC conduit along with accessories/ ceiling or wall mountain fan or exhaust fan etc. including point wiring of all Modular type switch/ socket on the existing Switch box/ cover including connections etc. as required. (The contractor shall visit of site and study the scope in detail work before submitting tender)

Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required.

Supplying and fixing of 2'x2' recess mounted LED fixture with 25-30 watts lamp (Make - Phillips/ Bajaj/ Crompton Greaves/Havells/Wipro)

Supply and fixing of wall mountain fan 16" . (Make- Bajaj/ Crompton Greaves/ Havells)

Supplying and fixing of ceiling mounted exhaust fan Exhaust Fans 12/18 inches with connecting flexable pipe /Louvers (Make- Bajaj/ Crompton Greaves/ Havells)

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required.

Supplying and laying 25 mm X 5 mm copper strip at 0.50 meter below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50 mm)

Supply & installation of ceiling prefabricated 14SWG perforted cable trays as per IS 2629. The entire fabrication and complecte with all bends, joint and accessories as per approval of site Engineer.

Size 75mm(W) x 50mm(D) cable tray

GAS DISTRIBUTION SYSTEM (For Fume Hood )

Semi-Auto-change over regulator for nitrogen, Brass Chrome Plate, Inlet 230 Bar, Outlet Avg. 14 bar, Inlet Connection NPTF 1/4'',Internal gas purging module, with Safety relief Valve, One cylinder connection in each side including SS bull nose, flexible hose (4 n0.) & cylinder bracket. (BRASS)

Cylinder Manifold, 4 Cylinder inlet along with manifold Block, shut off valve on each side with wall mount & clamp.

Cylinder Bracket with Chain and MS supporing fram

Connector for Change Over Panel outlet (1/4" MaleX1/4" OD). (SS304)

Source Connector for VP/AC/PC/RA

Ball Valve - 1" Flanged End. (SS304)

Flanges - 1" (SS304)

Ball Valve - 1/2" OD (SS304)

Ball Valve - 1" OD (SS304)

Tube - 1" OD (SS304)

Tube 1/2" OD (SS304)

Tube 3/8" OD (SS304)

Liquid Pressure Gauge with necessary connectors & conmplete fitting

Vacuum Pressure Gauge with necessary connectors & conmplete fitting

Line Pressure Gauge with necessary connectors & conmplete fitting

13 mm Insulation for Chilled Water In & Out (1"OD) (Nitrile)

13 mm Insulation for Chilled Water In & Out (1/2"OD) (Nitrile)

Tee 1"X1"X 1" OD (SS304)

Reducing Tee 1"X1"X 1/2" OD (SS304)

Tee 1/2"X1/2"X 1/2" OD (SS304)

Reducing Tee 1/2"X1/2"X 3/8" OD (SS304)

Elbow - 1" (SS304)

Reducer 1" X 1/2" OD (SS304)

Reducer 1/2" X 3/8" OD (SS304)

Connector 1/2" BSPF x 3/8" OD For Bench (SS304)

Connector 3/8 NPTM x 3/8" OD For FH (SS304)

Connector 1/2" BSPF x 1/2" OD For Sink/Bench (SS304)

Reducing Union 3/8" OD x 1/2" OD For Sink (Mixture Valve) (SS304)

Connector 3/8 NPTM x 1/2" OD For FH (SS304)

Profile (Aluminium)

Clamp set 1" (PP)

Clamp set 1/2" (PP)

Clamp set 3/8" (PP)

Tagging (Acrylic)

Tube supporta wall & ceiling including Hardware (Tee nut, anchoring bolt, screws, nuts, washers, etc.)

Orbital welding charges

Electric Geyser (Instant type), 3 LPM, 3 KW, 6 lts. Tank capacity, fibre/metalic body of 69.5 Deg C temperature output and Source Connector including electrical fitting and fixtures (switches & sockwts) as per required complete.

Two Stage, Air Cooled Screw type Air Compressor with receiver, motor, drier, filters (pre & After) - 14 CFM capacity with necessary Lubricant oil of 05 lts. including electrical fitting and fixtures (MCB cable etc.) as per required Technical Specification complete.

Vacuum Pump with Motor, vacuum gauge, Switch, Silencer, 500 Lts. Receiver etc. - 34 CFM capacity with 29" of Hg maximum vacuum, with necessary Lubricant oil of 05 lts. including electrical fitting and fixtures (MCB cable etc.) as per required Technical Specification complete.

Air Cooled, Screw type, Industrial Process Chiller, 4 TR capacity of outlet temperature from Chiller 6° C. with inbuilt re-circulation Pump of discharge 50 LPM, including electrical fitting and fixtures (MCB cable etc.)as per required Technical Specification complete.

Supply Installation, Testing & commissioning of 1.5 Ton split Inverter A.C (5 star rating) with 4 mm copper wire (15 mtr.), pvc condute, 16 amp rating, 240/415 volts MCB with MCB Box connections, etc. as required. Make:- Blue star, Voltas, Daikin, Hitachi, Haier

DRAINAGE & WATER SUPPLY LINE

Water supply line

Supply and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS 15801, UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, i/c fixing the pipe, Unions,Reducer,Coupling,Tee, Reducer tee, Elbow, Male adapater, Female adapter,End cap, Brass couplings, Flange, Gaskets, with clamps at 1.00 m spacing metal supports etc.

PPRC pipe - 25 mm OD, 3.4 mm (SDR-7.4)

PPRC pipe - 20 mm OD, 3.4 mm (SDR-7.4)

PPRC Ball Valve - 25 mm OD, (SDR-7.4)

PPRC Ball Valve - 20 mm OD, (SDR-7.4)

Drainage line

Supply, laying, joining,testing and commissioning of 80 mm dia HDPE pipeline with necessary slope. The rate quoted shall include for necessary fitting with Coupling, Tee, Elbow, Flange, Gaskets, clamps,Adhesives solution, Metal supports etc.

Supply Installation, Testing & commissioning of Smoke Detector , Make:- Honeywell/Sensor/Appolo

Supply Installation, Testing & commissioning of AUDIBLE VISUAL DEVICES SOUNDER , Make:- Honeywell/Sensor/Appolo

Supply Installation, Testing & commissioning of Heat Sensor , Make:- Honeywell/Sensor/Appolo

Supply Installation, Testing & commissioning of Unique ‘Plug & Play’ installation concept, Re-settable operating element option, Analogue addressable communications, Fully compliant with EN54, Part 11, Backward compatibility, Enhanced aesthetics, Integral LED, Integral Semi-Flush or surface mounting, loop isolation option Manual Call Points, Make:- Honeywell

Supply Installation, Testing & commissioning of 12V 7 AH Battery

Supply Laying Installation, Testing & commissioning of FRLS Cable (Normal Cable)

Supplying , Laying and fixing in position of the following sizes of exposed/concealed ISI Mark PVC conduit including all accessories complete as required and as per specifications.

25 mm dia 2mm thick conduit

Table with Top (1500 X 750 mm) shall be 25mm thick plain particle board clad with 0.6mm thick post formed laminate and 1mm thick backing laminate and flat edge duly sealed with 2mm thick PVC beading,

Medium Back Chair on castors, 4 bend PU Arms, Chrome Plated Pipe Frame & Base, Synchro Mechanism & Gas Lift, Seat and Back Letherite Tapestry.

Visitor Chair, PU Arms, Pipe Frame , Seat and Back Letherite Tapestry.

High Rise Revolving stool (Black seat cover) with cushion in seat & lumber support at back, SS metal stand with ring type foot rest & castors & Gas Lift

Sliding Door Unit (1200mm (W) x450mm (D) x1200mm (H))

MISCELLANEOUS

Removal /shifting of old furniture, fume hood and accessories and others unserviceable by mechanical transport including loading, unloading and proper stacking within 300 mtr. lead as per direction of Engineer in-charge. (The contractor shall visit of site and study the scope in detail work before submitting tender)

Existing grid false ceiling to be re-laid from the existing height of 2.7m to 3.00m using new drop roda from ture ceiling utilising new GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm Gypsum Tile of size 595x595 mm, and 12.5 mm thick tapered edge gypsum moisture resistant board to be side border 600 mm wide if required(ration 20:80) as per specification/direction of Engineer in-charge.

Supply and fixing aluminium work and partitions/ doors with extruded built up standard tubular sectionswith various size 80mm/60mm/ 40mm and thickness 2.8-3 mm. Anodised aluminium/ Powder coated aluminium (minimum thickness of powder coating 50 micron) and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides at EPDM rubber/ neoprene gasket etc. Providing fixing in bottem portion 12 mm thick prelaminated particle board/ PVC sheet/ flat pressed three layer or graded wood particle board conforming to IS:glazing / paneling, C.P. brass / stainless steel screws, and fixing float glass panes of 5 mm thicknessglazing in aluminium partation, door shutters etc. with EPDM rubber / neoprene gasket etc. complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling, hardware, hingess, and dash fasteners is including of these item)

Repairing of wall/ plaster as per requirement and distempering with oil bound washable distemper ( minimum two coat) of approved brand and manufacture to give an even shade in working site after completion of Installation of furniture and other allied wrorks.

Construction of RCC foundation/ cement concrete work etc. for Air Compressor, chiller unit vacuum pump & blower as per approved drawing and design.

Supplying and fixing steel structural shed in built up tubular (4"/3"/2"/ round, square or rectangular hollow tubes etc.) including cutting, hoisting, fixing in position and applying a priming coat of pproved steel primer, including welding and bolted with special shaped washers etc. and painting complete. Fixing in precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) and related other allied work desired by Engineer -in- charge.

AMC of 1st Year

AMC of 2nd year

AMC of 3rd year

AMC of 4th year

AMC of 5th year

Total of NPC LBORATORY (Room No. 228 and 229)

NEW CHEMISTRY LAB (Room No. 215,216 & 217)

BENCH TOP- AUTOSASH FUME HOOD (5’)

Overall Dimensions: 1500 mm W X 900 mm D X 2300 mm H (approx.)

Inside Fume Hood Working Volume: 1220 mm W X 660 mm D X 1180 mm H (approx.)

Bed size: 1220 mm W X 660 mm D (approx.)

Worktop height from the ground level: 795 -800mm (approx.)

FUME HOOD SERVICES

FH Front Control Valve For Comp. Air

FH Front Control Valve for Nitrogen

FH Front Control Valve for Vaccum

FH Front Control Valve for Chilled water In

FH Front Control Valve for Raw water

FH Front Control Valve for Chilled water Out

FUMEHOOD INTERNAL PIPING

Fume hood internal piping for 6 Nos. services upto 6" above false ceiling.

FUMEHOOD LIGHTING & SWITCHES

FR PVC insulated copper conductor, single core cable in FUME HOOD lighting & switches, sockets, including Wiring (1.5 Sq.mm FRLS) for light point and (2.5 Sq. mm FRLS) for Switches. (Cable approx 30 mtr.)

GRANITE HOOD WORK SURFACE

Granite hood work surface of L=124MM, D=787MM, THICKNESS=25MM.

CUP SINK

Poly over "PP" Cup sink black

ACCESSORIES

Apparatus Storage Base Cabinet (castors)

Solvent / Acid Storage Base Cabinet (castors)

Lattice Assembly(Apparatus Holding Grid)

Airflow monitor AFA 1000/1 (Digital) TEL UK

Complete as per T.S

BLOWER MOTOR & ACCESSORIES

3HP/4P Motor with Centrifugal Blower -Medium Pressure Direct Driven PP moulded Centrifugal Blowers including suitable clamp adapter, Electro galvanized stand and 3.0 HP Motors, 1500 CFM, 1400 RPM with DOL Starter for Centrifugal Blowers, base frame, vibration isolators, weather cowl, Stack support, wire mesh for bypass, blower inlet PP flange, inlet & outlet flexible connection for Blowers.

PP/FRP DUCTING & ACCESSORIES

Supply and installation of PP/FRP ducting using 3mm thick PPGL sheets with 2mm thick FRP lining using isothelic resin including necessary bends, reducers, T-connections, upports, flanges, gaskets, nutbolts flanges & bends and inside and outside lab duct supports and enamel duct painting for exposed ducts.

BLOWER PANEL/ VFD ACCESSORIES

1nos 32A TPN MCB 16kA with adjustable thermomagnetic release, with door interlocked with release for ON /TRIP/ OFF (latest ). Meters for measurement of current voltage, with Variable frequency Driver 1.1 KW for Exhaust blower with accessories as complete as per requirement.

ARMOURED COPPER CABLE:

Insulated sheathed steel tape armoured Copper cable with pvc outer sheathing 1.1 KV class, (All cables shall be AS PER IS 7098)

From panel to EXHAUST BLOWERS (1 nos.) of 1.1 KW (3 PHASE) 4 Core, 6 Sqm. cable.

SPOT EXTRACTOR

Alsident System 75 Exhaust Arm (75-6555-3-7-4) Ceiling Mounted 3 red joints, Reach: 1230 mm, including Ceiling Column to hold spot extractor Arm and other assocessories as complete.

LABOTARY FURNITURE

GRANITE WORKTOP & SKIRTING

SUPPLY & FIXING JET BLACK GRANITE TOP 20 (±2) MM THICK SUPERIOR QUALITY. THE OVERALL HANGING OF GRANITE IS 25 MM AT FRONT SIDE OF UNDER STRUCTURE. DRIP LINING BELOW THE TOPS AT 15MM FROM THE EDGE

GRANITE SKIRTING; 100 MM HEIGHT'; 20 (±2) MM THICK

C- Frame & Modules Details table wise, size depth 770 (±20) mm, Ht. 900 mm

C-Frame for Island table- Depth-1500mm x 900 mm (H)

C-Frame for Island table- Depth-1500mm x 900 mm (H)

C-frame for Wall Table - Depth900 mm X 900 mm (H)

C-frame for Wall Table - Depth900 mm X 900 mm (H)

C-frame for Wall Table - Depth 750 mm X 900 mm (H)

C-frame for Corner unit - Depth 750 mm X 900 mm (H)

C-frame for Corner unit - Depth 750 mm X 900 mm (H)

C-frame for Corner unit - Depth 750 mm X 900 mm (H)

C-frame for Corner unit - Depth 750 mm X 900 mm (H)

C-frame for Corner unit - Depth 750 mm X 900 mm (H)

C- Frame & Modules Details table wise, size depth 770 (±20) mm, Ht. 800 mm

C-Frame for Study table- Depth-1500mm x 800 mm (H)

C-Frame for Study table- Depth-1500mm x 800 mm (H)

C- Frame & Modules Details table wise, size depth 770 (±20) mm, Ht. 750 mm

C-frame for Wall Table - Depth 750 mm X 750 mm (H)

C-frame for Wall Table - Depth 750 mm X 750 mm (H)

C-frame for Wall Table - Depth 750 mm X 750 mm (H)

C-frame for Corner unit - Depth 750 mm X 750 mm (H)

C-frame for Corner unit - Depth 750 mm X 750 mm (H)

Modules on C-frame (570 mm D x 635mm H) approx. (castors type)

One Drawer & Two Shutters- 750mm W

One Drawer & Two Shutters- 600mm W

One Drawer & one Shutters- 450mm W

One Shutter Corner Unit- 900mm L x 900mm W

Modules on C-frame (570 mm D x 535mm H) approx. (castors type)

One Drawer & One Shutter- 450mm W

One Shutter Corner Unit- 900mm L x 900mm W

Filler panel /Closing Panles

900 H Table (side & back panel)

750 Side Table (side & back panel)

Reagent Rack

Reagent Rack island Table :- 2 Tier Structure with provision for Switch and socket cutout provision. Both shelves will have 3mm friction glass fixing on top. Two shelves of 380 mm depth are adjustable and part will have storage cabinet aggange.

Size:- 2700Lmm x 400/380 + 300mmW x 1200 H

Sink / Peg Board/Taps / Utility

Big PP sink Outer size: 22" L X 18" W X 12" D & Inner size: 19" L X 15"W X 11" D approx.

Peg Board Big size: 750mm L X 750mm H ( 30 Pegs.) with SS Collection Tray to be fixed MS stand

Worktop mounted handed Eye wash

Two way utility Tap (Far-Italy) U-type

One Way Mixer water Tap- (Far-Italy) (Hot & Cold)

PVC Waste Pipe

Electrical Trunking (Box structure)

Electrical Trunking:- Box structure single side and corner with provision for Switch and socket fittings. (Wall Table)

Size:-1050 Lmm x 120 mm W x 120 mmH

Size:-750 Lmm x 120 mm W x 120 mmH

Size:-3500 Lmm x 120 mm W x 120 mmH

Size:-1500 Lmm x 120 mm W x 120 mmH

Size:-1050 Lmm x 120 mm W x 120 mmH (corner bend)

2 compartment Service Droppers in Lab 300mm L X 100MM D X 2300mm H

Electrical Trunking:- Box structure Double side with provision for Switch and socket fittings. (Wall Table)

Size:-800 Lmm x 200 mm W x 120 mmH

Switch & Sockets

Electrical 6 Pin shutter socket with Piano switch including module plate 5/15A , (Northwest/ Norisys Make) With Wiring (2.5 Sq.mm FRLS)

Data Point With Wiring (CAT-6 wire )

Voice Point With Wiring (0.5 Sq. mm FR )

Chemical storage Cabinets (CSC)

Floor Mounted Full Height Chemical Storage Cabinets (Two numbers Toughened Glass Door and phenolic resin laminate liner with Four adjustable shelves & one fix shelf , each shelf will have 2nos. PP tray) Total PP Trays 10 Nos. Size:- 1000Lmm x 450mm W x 1800 mmH

Centrifugal Blower with motor including assocessories complete. (1.5 HP)with DOL Starter for Centrifugal Blowers, base frame, vibration isolators, weather cowl, Stack support, wire mesh for bypass, blower inlet PP flange, inlet & outlet flexible connection for Blowers.

Glassware storage Cabinets (GSC)

Glassware storage Cabinets (GSC) in CRCA MS/ GI Structure GI Structure epoxy powder coated construction, five nos. adjustable shelf, double skin glass doors with SS Handles, Size:-1000Lmm x 450mm W x 2100 mmH (approx.)

Storage Cabinets

Wall Mounted Overhead File Cabinets (Float Glass Door) GI Structure Two Shutter with one adjustable shelf Size:- 750Lmm x 370mm W x 750 mmH (approx.)

Lab Chairs/ stools

Medium Back Chair on castors, 4 bend PU Arms, Chrome Plated Pipe Frame & Base, Synchro Mechanism & Gas Lift, Seat and Back Letherite Tapestry.

High Rise Revolving stool (Black seat cover) with cushion in seat & lumber support at back, SS metal stand with ring type foot rest & castors & Gas Lift

ELECTRICAL WORK

Point

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular type switch, phenolic laminated sheet, suitable size G.I. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.

Group C

Cable

Wiring in existing conduit: Supply and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in existing surface/ recessed steel/ PVC conduit as requried

2 x 1.5 sq.mm

2 x 2.5 sq.mm

2 x 4.0 sq.mm

2 x 6.0 sq.mm

4 x 10.0 sq.mm

1 x 1.0 sqmm ( Earth Wire)

Supplying and drawing plain 16/0.2 ( 0.5) twin flat flexible FR PVC insulated annealed copper conductor, unarmored telephone cable in the PVC sleeve of Suitable size

Twin Flat

PVC conduit

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

20 mm (2mm thick)

25 mm (2mm thick)

40 mm (2mm thick)

Modular GI Box

Supplying and fixing following sizes of Modules, GI Box with Modular base and Cover plate for modular switches in recesess etc as required.

1 or 2 Module ( 75 x 75 MM )

3 Module ( 100 mm x 75 mm )

4 Module ( 125 mm x 75 mm)

6 Module ( 200 mm x 75 mm )

Cable Tray

Supply & installation of ceiling prefabricated 14SWG perforted cable trays as per IS 2629. The entire fabrication and complecte with all bends, joint and accessories as per approval of site Engineer.

Size 150mm(W) x 50mm(D) cable tray

Size 75mm(W) x 50mm(D) cable tray

Modular Switch/Sockets

Supplying and fixing following Modular type switch/ socket on the existing Switch box/ cover including connections etc. as required.

5/6 amps switch

15/16 amps switch

3 pin 5/6 amps socket outlet

6 pin15/16 amps socket outlet

Telephone Socket outlet

Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required.

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable Singlr runin theexisting surface/ recessed steel/ PVC conduit as required.

MCB/ MCCB/ RCCB

Supplying and fixing following way, single pole and neutral, sheetsteel, MCB distribution board, 240 volts, on surface/ recess,complete with tinned copper bus bar, neutral bus bar, earth bar,din bar, interconnections, powder painted including earthing etc.as required. (But without MCB/RCCB/Isolator)

8 way Double door

12 way Double door

16 way double door

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/recess, complete with tinned copper bus bar, neutral bus bar,earth bar, din bar, interconnections, powder painted includingearthing etc. as required. (But without MCB/RCCB/Isolator)

8 way (4 + 24), Double door

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, “C”curve, miniature circuit breaker suitable for inductive load offollowing poles in the existing MCB DB complete with connections,testing and commissioning etc. as required.

Single pole

Single pole and neutral

Double pole

Triple pole

Triple pole and neutral

Providing and fixing following rating and breaking capacity andpole MCCB in existing cubicle panel board including drilling holesin cubicle panel, making connections, etc. as required.

125 Amp, 36 KA, FPMCCB (four pole)

Earthing

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thickincluding accessories, and providing masonry enclosure with coverplate having locking arrangement and watering pipe of 2.7 metrelong etc. with charcoal/ coke and salt as required.

Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/terminating with nut, bolt, spring, washer etc. as required. (Jointingshall be done by overlapping and with 2 sets of brass nut bolt &spring washer spaced at 50mm)

Light/ fan/ exhaust and accessories

Supplying and fixing of 2'x2' recess mounted LED fixture with 25-30 watts lamp (Make - Phillips/ Bajaj/ Crompton Greaves/Havells/Wipro) (4 no for Room No.-125)

Supply and fixing of wall mountain fan 16" . (Make- Bajaj/ Crompton Greaves/ Havells) (10.0 nos. for NPC lab Basement)

Supplying and fixing of ceiling mounted exhaust fan Exhaust Fans 18 inches with connecting flexable pipe /Louvers (Make- Bajaj/ Crompton Greaves/ Havells) (2.0 nos. for NPC lab Basement)

Supply and commissioning of 200 amp BUS Bar with 3+1 Aluminium srtips with earthing provision and powder coating.

Supplying and fixing of 63 amps TPN

Supplying and fixing of 40 amps MCB DP

Supplying and fixing MCB Metal Box cover for covering 40 amps DP

Supplying and fixing Metal Cover Box for covering 125 amps MCCB

GAS DISTRIBUTION SYSTEM

Semi-Auto-change over regulator for nitrogen, Brass Chrome Plate, Inlet 230 Bar, Outlet Avg. 14 bar, Inlet Connection NPTF 1/4'',Internal gas purging module, with Safety relief Valve, One cylinder connection in each side including SS bull nose, flexible hose (4 n0.) & cylinder bracket. (BRASS)

Cylinder Manifold, 4 Cylinder inlet along with manifold Block, shut off valve on each side with wall mount & clamp.

Cylinder Bracket with Chain and MS supporing fram

Connector for Change Over Panel outlet (1/4" MaleX1/4" OD). (SS304)

Source Connector for VP/AC/PC/RA

Ball Valve - 1" Flanged End. (SS304)

Flanges - 1" (SS304)

Ball Valve - 1/2" OD (SS304)

Ball Valve - 1" OD (SS304)

Tube - 1" OD (SS304)

Tube 1/2" OD (SS304)

Tube 3/8" OD (SS304)

Liquid Pressure Gauge with necessary connectors & conmplete fitting

Vacuum Pressure Gauge with necessary connectors & conmplete fitting

Line Pressure Gauge with necessary connectors & conmplete fitting

13 mm Insulation for Chilled Water In & Out (1"OD) (Nitrile)

13 mm Insulation for Chilled Water In & Out (1/2"OD) (Nitrile)

Tee 1"X1"X 1" OD (SS304)

Reducing Tee 1"X1"X 1/2" OD (SS304)

Tee 1/2"X1/2"X 1/2" OD (SS304)

Reducing Tee 1/2"X1/2"X 3/8" OD (SS304)

Elbow - 1" (SS304)

Reducer 1" X 1/2" OD (SS304)

Reducer 1/2" X 3/8" OD (SS304)

Connector 1/2" BSPF x 3/8" OD For Bench (SS304)

Connector 3/8 NPTM x 3/8" OD For FH (SS304)

Connector 1/2" BSPF x 1/2" OD For Sink/Bench (SS304)

Reducing Union 3/8" OD x 1/2" OD For Sink (Mixture Valve) (SS304)

Connector 3/8 NPTM x 1/2" OD For FH (SS304)

Profile (Aluminium)

Clamp set 1" (PP)

Clamp set 1/2" (PP)

Clamp set 3/8" (PP)

Tagging (Acrylic)

Tube supporta wall & ceiling including Hardware (Tee nut, anchoring bolt, screws, nuts, washers, etc.)

Orbital welding charges

Electric Geyser (Instant type), 3 LPM, 3 KW, 6 lts. Tank capacity, fibre/metalic body of 69.5 Deg C temperature output and Source Connector including electrical fitting and fixtures (switches & sockwts) as per required complete.

Two Stage, Air Cooled Screw type Air Compressor with receiver, motor, drier, filters (pre & After) - 14 CFM capacity with necessary Lubricant oil of 05 lts. including electrical fitting and fixtures (MCB cable etc.) as per required Technical Specification complete.

Vacuum Pump with Motor, vacuum gauge, Switch, Silencer, 500 Lts. Receiver etc. - 34 CFM capacity with 29" of Hg maximum vacuum, with necessary Lubricant oil of 05 lts. including electrical fitting and fixtures (MCB cable etc.) as per required Technical Specification complete.

Air Cooled, Screw type, Industrial Process Chiller, 4 TR capacity of outlet temperature from Chiller 6° C. with inbuilt re-circulation Pump of discharge 50 LPM, including electrical fitting and fixtures (MCB cable etc.)as per required Technical Specification complete.

Supply Installation, Testing & commissioning of 2.0 Ton split Inverter A.C (5 star rating) with 4 mm copper wire (15 mtr.), pvc condute, 16 amp rating, 240/415 volts MCB with MCB Box connections, etc. as required. Make:- Blue star, Voltas, Daikin, Hitachi, Haier

DRAINAGE & WATER SUPPLY LINE

Water supply line

Supply and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS 15801, UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, i/c fixing the pipe, Unions,Reducer,Coupling,Tee, Reducer tee, Elbow, Male adapater, Female adapter,End cap, Brass couplings, Flange, Gaskets, with clamps at 1.00 m spacing metal supports etc.

PPRC pipe - 25 mm OD, 3.4 mm (SDR-7.4)

PPRC pipe - 20 mm OD, 3.4 mm (SDR-7.4)

PPRC Ball Valve - 25 mm OD, (SDR-7.4)

PPRC Ball Valve - 20 mm OD, (SDR-7.4)

Drainage line

Supply, laying, joining,testing and commissioning of 80 mm dia HDPE pipeline with necessary slope. The rate quoted shall include for necessary fitting with Coupling, Tee, Elbow, Flange, Gaskets, clamps,Adhesives solution, Metal supports etc.

Supply Installation, Testing & commissioning of Smoke Detector , Make:- Honeywell/Sensor/Appolo

Supply Installation, Testing & commissioning of AUDIBLE VISUAL DEVICES SOUNDER , Make:- Honeywell/Sensor/Appolo

Supply Installation, Testing & commissioning of Heat Sensor with respective holding box , Make:- Honeywell/Sensor/Appolo

Response indicator (RI)

Supply Installation, Testing & commissioning of Unique ‘Plug & Play’ installation concept, Re-settable operating element option, Analogue addressable communications, Fully compliant with EN54, Part 11, Backward compatibility, Enhanced aesthetics, Integral LED, Integral Semi-Flush or surface mounting, loop isolation option Manual Call Points, Make:- Honeywell

Supply Laying Installation, Testing & commissioning of FRLS Cable (Normal Cable)

Supplying , Laying and fixing in position of the following sizes of exposed/concealed ISI Mark PVC conduit including all accessories complete as required and as per specifications.

25 mm dia 2mm thick conduit

MISCELLANEOUS

Supply & laying of vitrified floor tiles in sizes 600 x 600 mm (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622) proved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.

Supply and fixing aluminium work and partitions/ doors/ windows with extruded built up standard tubular sectionswith various size 80mm/60mm/ 40mm and thickness 2.8-3 mm. Anodised aluminium/ Powder coated aluminium (minimum thickness of powder coating 50 micron) and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides at EPDM rubber/ neoprene gasket etc. Providing fixing in bottem portion 12 mm thick prelaminated particle board/ PVC sheet/ flat pressed three layer or graded wood particle board conforming to IS:glazing / paneling, C.P. brass / stainless steel screws, and fixing float glass panes of 5 mm thicknessglazing in aluminium partation, door shutters etc. with EPDM rubber / neoprene gasket etc. complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling, hardware, hingess, and dash fasteners is including of these item)

Supply & fixing GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mmGypsum Tile of size 595x595 mm, and 12.5 mm thick tapered edge gypsum moisture resistant board to be side border 600 mm wide if required(ration 20:80) as per specification/direction of Engineer in-charge.

Finishing of wall with 1mm thick white cement based putty and distempering with oil bound washable distemper ( minimum two coat) of approved brand and manufacture to give an even shade in working site after completion of Installation of furniture and other allied wrorks. (Area 170.0 sqm approx.)

Construction of PCC foundation/ cement concrete work on roof top etc. for exhaust blower of fume hood and equipment as per approved drawing and design. Size (4'x4'x 8")

Supplying and fixing steel structural shed in built up tubular (4"/3"/2"/ round, square or rectangular hollow tubes etc.) including cutting, hoisting, fixing in position and applying a priming coat of pproved steel primer, including welding and bolted with special shaped washers etc. and painting complete. Fixing in precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) and related other allied work desired by Engineer -in- charge. Size (20' L X 8' W X 7' H)

AMC charges for 1st year

AMC charges for 2nd year

AMC charges for 3rd year

AMC charges for 4th year

AMC charges for 5th year

Total of Room No. 215, 216 and 217

NPC LABORATORY ROOM NO.-231

BENCH TOP- AUTOSASH FUME HOOD (5’)

Overall Dimensions: 1500 mm W X 900 mm D X 2300 mm H (approx.)

Inside Fume Hood Working Volume: 1220 mm W X 660 mm D X 1180 mm H (approx.)

Bed size: 1220 mm W X 660 mm D (approx.)

Worktop height from the ground level: 795 -800mm (approx.)

FUME HOOD SERVICES

FH Front Control Valve For Comp. Air

FH Front Control Valve for Nitrogen

FH Front Control Valve for Vaccum

FH Front Control Valve for Chilled water In

FH Front Control Valve for Raw water

FH Front Control Valve for Chilled water Out

FUMEHOOD INTERNAL PIPING

Fume hood internal piping for 6 Nos. services upto 6" above false ceiling.

FUMEHOOD LIGHTING & SWITCHES

FR PVC insulated copper conductor, single core cable in FUME HOOD lighting & switches, sockets, including Wiring (1.5 Sq.mm FRLS) for light point and (2.5 Sq. mm FRLS) for Switches. (Cable approx 30 mtr.)

GRANITE HOOD WORK SURFACE

Granite hood work surface of L=124MM, D=787MM, THICKNESS=25MM.

CUP SINK

Poly over "PP" Cup sink black

ACCESSORIES

Apparatus Storage Base Cabinet (castors)

Solvent / Acid Storage Base Cabinet (castors)

Lattice Assembly(Apparatus Holding Grid)

Airflow monitor AFA 1000/1 (Digital) TEL UK

Complete as per T.S

BLOWER MOTOR & ACCESSORIES

3HP/4P Motor with Centrifugal Blower -Medium Pressure Direct Driven PP moulded Centrifugal Blowers including suitable clamp adapter, Electro galvanized stand and 3.0 HP Motors, 1500 CFM, 1400 RPM with DOL Starter for Centrifugal Blowers, base frame, vibration isolators, weather cowl, Stack support, wire mesh for bypass, blower inlet PP flange, inlet & outlet flexible connection for Blowers.

PP/FRP DUCTING & ACCESSORIES

Supply and installation of PP/FRP ducting using 3mm thick PPGL sheets with 2mm thick FRP lining using isothelic resin including necessary bends, reducers, T-connections, upports, flanges, gaskets, nutbolts flanges & bends and inside and outside lab duct supports and enamel duct painting for exposed ducts.

EXHAUST BLOWER PANEL

1nos 30A TP MCCB 25kA with adjustable thermomagnetic release, with door interlocked with release for O/L, S/C ,S/T and ON /TRIP/ OFF (latest ). Meters for measurement of current voltage, 1 nos of ELE(0-8a) with CBCT, Bushbar equally sized three phase and netural aluminium conductors bars, suitable sized to carry 63A current and suitable insulated with color coded heat shirinnk.

ARMOURED COPPER CABLE:

Insulated sheathed steel tape armoured Copper cable with pvc outer sheathing 1.1 KV class, (All cables shall be AS PER IS 7098)

From panel to EXHAUST BLOWERS (1 nos.) of 1.1 KW (3 PHASE) 4 Core, 6 Sqm. cable.

SPOT EXTRACTOR

Alsident System 75 Exhaust Arm (75-6555-3-7-4) Ceiling Mounted 3 red joints, Reach: 1230 mm, including Ceiling Column to hold spot extractor Arm and other assocessories as complete.

GRANITE WORKTOP & SKIRTING

SUPPLY & FIXING JET BLACK GRANITE TOP 20 (±2) MM THICK SUPERIOR QUALITY. THE OVERALL HANGING OF GRANITE IS 25 MM AT FRONT SIDE OF UNDER STRUCTURE. DRIP LINING BELOW THE TOPS AT 15MM FROM THE EDGE

GRANITE SKIRTING; 100 MM HEIGHT'; 20 (±2) MM THICK

C- Frame & Modules Details table wise, size depth 770 (±20) mm, Ht. 900 mm

C-Frame for Island table- Depth-1500mm x 900 mm (H)

C-frame for Wall Table - Depth 750 mm X 900 mm (H)

C-frame for Wall Table - Depth 750 mm X 900 mm (H)

C-frame for Wall Table - Depth 750 mm X 900 mm (H)

C-frame for Corner unit - Depth 750 mm X 900 mm (H)

C-frame for Corner unit - Depth 750 mm X 900 mm (H)

C-frame for Corner unit - Depth 750 mm X 900 mm (H)

C- Frame & Modules Details table wise, size depth 670 (±10) mm, Ht. 750 mm

C-frame for Wall Table - Depth 650 mm X 750 mm (H)

Modules on C-frame (570 mm D x 635mm H) approx. (castors type)

One Drawer & One Shutter- 450mm W(535 mm D x 535mm H)

One Drawer & Two Shutters- 600mm W

One Drawer & Two Shutters- 750mm W

One Shutter Corner Unit- 900mm L x 900mm W

Filler panel /Closing Panles

900 H Table (side/back panel)

750 H Table (side/ back panel)

Reagent Rack

Reagent Rack island Table :- 2 Tier Structure with provision for Switch and socket cutout provision. Both shelves will have 3mm friction glass fixing on top. Two shelves of 380 mm depth are adjustable and part will have storage cabinet aggange.

Size:- 2250 mmL x 400/380 + 300mmW x 1200 H

Reagent Rack wall table:- 2 Tier Structure with provision for Switch and socket . Both shelves will have 3mm friction glass fixing on top. Two shelves of 190 mm depth are adjustable and part will have storage cabinet aggange.

Size:- 2250 mmL x 190mmW x 1200mmH

Sink / Peg Board/Taps / Utility

Big PP sink Outer size: 22" L X 18" W X 12" D & Inner size: 19" L X 15"W X 11" D approx.

Peg Board Big size: 750mm L X 750mm H ( 30 Pegs.) with SS Collection Tray to be fixed MS stand

Two way utility Tap (Far-Italy)

Worktop mounted handed Eye wash

One Way Mixer water Tap- (Far-Italy) (Hot & Cold)

PVC Waste Pipe

Electrical Trunking (Box structure)

Electrical Trunking:- Box structure single side with provision for Switch and socket fittings. (Wall Table)

Size:-4000 mmLx 120 mm W x 120 mmH

Size:-1200 mmLx 120 mm W x 120 mmH

Size:-1200 mmL x 120 mm W x 120 mmH

Switch & Sockets

Electrical 6 Pin shutter socket with Piano switch including module plate 5/15A , (Northwest/ Norisys Make) With Wiring (2.5 Sq.mm FRLS)

Data Point With Wiring (CAT-6 wire )

Voice Point without Wiring (0.5 Sq. mm FR for Voice Point)

Chemical storage Cabinets (CSC)

Floor mounted Full Height Chemical storage Cabinets (Two numbers Toughened Glass door and phenolic resin aminated liner with four adjustable shelves & one fix shelf, with locking system, Size:- 1000Lmm x 450mm W x 1800 mmH

Overhead storage Cabinets

Wall Mounted Overhead File Cabinets (Float Glass Door) in CRCA MS/ GI Structure epoxy powder coated construction, Two Shutter with one adjustable shelf Size:- 750Lmm x 370mm W x 750 mmH (approx.)

Lab. chair& stool

Medium Back Chair on castors, 4 bend PU Arms, Chrome Plated Pipe Frame & Base, Synchro Mechanism & Gas Lift, Seat and Back Letherite Tapestry.

High Rise Revolving stool (Black seat cover) with cushion in seat & lumber support at back, SS metal stand with ring type foot rest & castors & Gas Lift

ELECTRICAL WORK

ARMOURED COPPER CABLE:

Supply and drawing following sizes of FR LS PVC insulated copper conductor, single core cable in Lab Furniture & lighting, switches, sockets etc.

1.5 Sq. mm for switch & socket 5/15 amp

2.5 Sq. mm for switch & socket 5/15 amp

Laying of existing PVC conduit / old cable for light point/ ceiling or wall mountain fan or exhaust fan etc. including point wiring of all Modular type switch/ socket on the existing Switch box/ cover including connections etc. as required.

Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required.

Supplying and fixing of 2'x2' recess mounted LED fixture with 25-30 watts lamp (Make - Phillips/ Bajaj/ Crompton Greaves/Havells/Wipro)

Supply and fixing of wall mountain fan 16" . (Make- Bajaj/ Crompton Greaves/ Havells)

Supplying and fixing of ceiling mounted exhaust fan Exhaust Fans 12/18 inches with connecting flexable pipe /Louvers (Make- Bajaj/ Crompton Greaves/ Havells)

Supply & installation of ceiling prefabricated 14SWG perforted cable trays as per IS 2629. The entire fabrication and complecte with all bends, joint and accessories as per approval of site Engineer.

Size 75mm(W) x 50mm(D) cable tray

GAS DISTRIBUTION SYSTEM (For Fume Hood and Island table )

Ball Valve - 1/2" OD (SS304)

Ball Valve - 1" OD (SS304)

Tube - 1" OD (SS304)

Tube 1/2" OD (SS304)

Tube 3/8" OD (SS304)

13 mm Insulation for Chilled Water In & Out (1"OD) (Nitrile)

13 mm Insulation for Chilled Water In & Out (1/2"OD) (Nitrile)

13 mm Insulation for Chilled Water In & Out (3/8"OD) (Nitrile)

Tee 1"X1"X 1" OD (SS304)

Reducing Tee 1"X1"X 1/2" OD (SS304)

Tee 1/2"X1/2"X 1/2" OD (SS304)

Reducing Tee 1/2"X1/2"X 3/8" OD (SS304)

Elbow - 1" (SS304)

Reducer 1" X 1/2" OD (SS304)

Reducer 1/2" X 3/8" OD (SS304)

Connector 1/2" BSPF x 3/8" OD For Bench (SS304)

Connector 3/8 NPTM x 3/8" OD For FH (SS304)

Connector 1/2" BSPF x 1/2" OD For Sink/Bench (SS304)

Reducing Union 3/8" OD x 1/2" OD For Sink (Mixture Valve) (SS304)

Connector 3/8 NPTM x 1/2" OD For FH (SS304)

Profile (Aluminium)

Clamp set 1" (PP)

Clamp set 1/2" (PP)

Clamp set 3/8" (PP)

Tagging (Acrylic)

Tube supporta wall & ceiling including Hardware (Tee nut, anchoring bolt, screws, nuts, washers, etc.)

Orbital welding charges

Electric Geyser (Instant type), 3 LPM, 3 KW, 6 lts. Tank capacity, fibre/metalic body of 69.5 Deg C temperature output and Source Connector including electrical fitting and fixtures.

DRAINAGE & WATER SUPPLY LINE

Water supply line

Supply and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS 15801, UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, i/c fixing the pipe, Unions,Reducer,Coupling,Tee, Reducer tee, Elbow, Male adapater, Female adapter,End cap, Brass couplings, Flange, Gaskets, with clamps at 1.00 m spacing metal supports etc.

PPRC pipe - 25 mm OD, 3.4 mm (SDR-7.4)

PPRC pipe - 20 mm OD, 3.4 mm (SDR-7.4)

PPRC Ball Valve - 25 mm OD, (SDR-7.4)

PPRC Ball Valve - 20 mm OD, (SDR-7.4)

Drainage line

Supply, laying, joining,testing and commissioning of 80 mm dia HDPE pipeline with necessary slope. The rate quoted shall include for necessary fitting with Coupling, Tee, Elbow, Flange, Gaskets, clamps,Adhesives solution, Metal supports etc.

Supply Installation, Testing & commissioning of Smoke Detector , Make:- Honeywell/Sensor/Appolo

Supply Installation, Testing & commissioning of AUDIBLE VISUAL DEVICES SOUNDER , Make:- Honeywell/Sensor/Appolo

Supply Installation, Testing & commissioning of Heat Sensor , Make:- Honeywell/Sensor/Appolo

Supply Installation, Testing & commissioning of Unique ‘Plug & Play’ installation concept, Re-settable operating element option, Analogue addressable communications, Fully compliant with EN54, Part 11, Backward compatibility, Enhanced aesthetics, Integral LED, Integral Semi-Flush or surface mounting, loop isolation option Manual Call Points, Make:- Honeywell

Supply Laying Installation, Testing & commissioning of FRLS Cable (Normal Cable)

Supplying , Laying and fixing in position of the following sizes of exposed/concealed ISI Mark PVC conduit including all accessories complete as required and as per specifications.

25 mm dia 2mm thick conduit

Removal /shifting of old furniture, fume hood and accessories and others unserviceable by mechanical transport including loading, unloading and proper stacking within 300 mtr. lead as per direction of Engineer in-charge. (The contractor shall visit of site and study the scope in detail work before submitting tender)

MISCELLANEOUS

Removing of old false ceiling and fixing new GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thickwith 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm , of the building as per specification/direction of Engineer in-charge.

Distempering with oil bound washable distemper ( minimum two coat) of approved brand and manufacture to give an even shade in working site after completion of Installation of furniture and other allied wrorks.

Construction of RCC foundation/ cement concrete work etc. for fume hood blower as per approved drawing and design. (Size - 4' x 4' x 8")

AMC charges for 1st year

AMC charges for 2nd year

AMC charges for 3rd year

AMC charges for 4th year

AMC charges for 5th year

Total of Room No. 231

FUME-HOOD : Bio-Organic Chemistry Lab.

BENCH TOP- AUTOSASH FUME HOOD (5’)

Overall Dimensions: 1500 mm W X 900 mm D X 2300 mm H (approx.)

Inside Fume Hood Working Volume: 1220 mm W X 660 mm D X 1180 mm H (approx.)

Bed size: 1220 mm W X 660 mm D (approx.)

Worktop height from the ground level: 795 -800mm (approx.)

FUME HOOD SERVICES

FH Front Control Valve For Comp. Air

FH Front Control Valve for Nitrogen

FH Front Control Valve for Vaccum

FH Front Control Valve for Chilled water In

FH Front Control Valve for Raw water

FH Front Control Valve for Chilled water Out

FUMEHOOD INTERNAL PIPING

Fume hood internal piping for 6 Nos. services upto 6" above false ceiling.

FUMEHOOD LIGHTING & SWITCHES

FR PVC insulated copper conductor, single core cable in FUME HOOD lighting & switches, sockets, including Wiring (1.5 Sq.mm FRLS) for light point and (2.5 Sq. mm FRLS) for Switches. (Cable approx 30 mtr.)

GRANITE HOOD WORK SURFACE

Granite hood work surface of L=124MM, D=787MM, THICKNESS=25MM.

CUP SINK

Poly over "PP" Cup sink black

ACCESSORIES

Apparatus Storage Base Cabinet (castors)

Solvent / Acid Storage Base Cabinet (castors)

Lattice Assembly(Apparatus Holding Grid)

Airflow monitor AFA 1000/1 (Digital) TEL UK

Complete as per T.S

BLOWER MOTOR & ACCESSORIES

3.5HP/4P Motor with Centrifugal Blower -Medium Pressure Direct Driven PP moulded Centrifugal Blowers including suitable clamp adapter, Electro galvanized stand and 3.5 HP Motors, 1500 CFM, 1400 RPM with DOL Starter for Centrifugal Blowers, base frame, vibration isolators, weather cowl, Stack support, wire mesh for bypass, blower inlet PP flange, inlet & outlet flexible connection for Blowers.

PP/FRP DUCTING & ACCESSORIES

Supply and installation of PP/FRP ducting using 3mm thick PPGL sheets with 2mm thick FRP lining using isothelic resin including necessary bends, reducers, T-connections, upports, flanges, gaskets, nutbolts flanges & bends and inside and outside lab duct supports and enamel duct painting for exposed ducts.

BLOWER PANEL/ VFD ACCESSORIES

1nos 63A TPN MCCB 16kA with adjustable thermomagnetic release, with door interlocked with release for ON /TRIP/ OFF (latest ). Meters for measurement of current voltage, with Variable frequency Driver 1.1 KW for Exhaust blower with accessories as complete as per requirement.

ARMOURED COPPER CABLE:

Insulated sheathed steel tape armoured Copper cable with pvc outer sheathing 1.1 KV class, (All cables shall be AS PER IS 7098)

From panel to EXHAUST BLOWERS (1 nos.) of 1.1 KW (3 PHASE) 4 Core, 6 Sqm. cable.

ARMOURED COPPER CABLE:

Wiring in existing conduit: Supply and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in existing surface/ recessed steel/ PVC conduit as requried

4.0 sq.mm (blower)

FUME-HOOD For Kilo Lab.

BENCH TOP- AUTO BAYPASS FUME HOOD (5’)

Overall Dimensions: 1500 mm W X 900 mm D X 2300 mm H (approx.)

Inside Fume Hood Working Volume: 1220 mm W X 660 mm D X 1180 mm H (approx.)

Bed size: 1220 mm W X 660 mm D (approx.)

Worktop height from the ground level: 795 -800mm (approx.)

FUME HOOD SERVICES

FH Front Control Valve For Comp. Air

FH Front Control Valve for Nitrogen

FH Front Control Valve for Vaccum

FH Front Control Valve for Chilled water In

FH Front Control Valve for Raw water

FH Front Control Valve for Chilled water Out

FUMEHOOD INTERNAL PIPING

Fume hood internal piping for 6 Nos. services upto 6" above false ceiling.

FUMEHOOD LIGHTING & SWITCHES

FR PVC insulated copper conductor, single core cable in FUME HOOD lighting & switches, sockets, including Wiring (1.5 Sq.mm FRLS) for light point and (2.5 Sq. mm FRLS) for Switches. (Cable approx 30 mtr.)

GRANITE HOOD WORK SURFACE

Granite hood work surface of L=124MM, D=787MM, THICKNESS=25MM.

CUP SINK

Poly over "PP" Cup sink black

ACCESSORIES

Apparatus Storage Base Cabinet (castors)

Solvent / Acid Storage Base Cabinet (castors)

Lattice Assembly(Apparatus Holding Grid)

Airflow monitor AFA 1000/1 (Digital) TEL UK

Complete as per T.S

BLOWER MOTOR & ACCESSORIES

2.0 HP/4P Motor with Centrifugal Blower -Medium Pressure Direct Driven PP moulded Centrifugal Blowers including suitable clamp adapter, Electro galvanized stand and 2.0 HP Motors, 1500 CFM, 1400 RPM with DOL Starter for Centrifugal Blowers, base frame, vibration isolators, weather cowl, Stack support, wire mesh for bypass, blower inlet PP flange, inlet & outlet flexible connection for Blowers.

PP/FRP DUCTING & ACCESSORIES

Supply and installation of PP/FRP ducting using 3mm thick PPGL sheets with 2mm thick FRP lining using isothelic resin including necessary bends, reducers, T-connections, upports, flanges, gaskets, nutbolts flanges & bends and inside and outside lab duct supports and enamel duct painting for exposed ducts.

ARMOURED COPPER CABLE:

Insulated sheathed steel tape armoured Copper cable with pvc outer sheathing 1.1 KV class, (All cables shall be AS PER IS 7098)

From panel to EXHAUST BLOWERS (1 nos.) of 1.1 KW (3 PHASE) 4 Core, 6 Sqm. cable.

LABOTARY FURNITURE

GRANITE WORKTOP & SKIRTING

SUPPLY & FIXING JET BLACK GRANITE TOP 20 (±2) MM THICK SUPERIOR QUALITY. THE OVERALL HANGING OF GRANITE IS 25 MM AT FRONT SIDE OF UNDER STRUCTURE. DRIP LINING BELOW THE TOPS AT 15MM FROM THE EDGE

GRANITE SKIRTING; 100 MM HEIGHT'; 20 (±2) MM THICK

C- Frame & Modules Details table wise, size depth 770 (±20) mm, Ht. 900 mm

C-Frame for Island table- Depth-1500mm x 900 mm (H)

C-Frame for Island table- Depth-1500mm x 900 mm (H)

C-Frame for Island table- Depth-1500mm x 900 mm (H)

C-Frame for Island table- Depth-1500mm x 900 mm (H)

C- Frame & Modules Details table wise, size depth 670 (±10) mm, Ht. 750 mm

C-frame for Wall Table - Depth 650 mm X 750 mm (H)

Modules on C-frame (570 mm D x 635mm H) approx. (castors type)

One Drawer & Two Shutters- 600mm W

Two Shutter sink Unit- 1500mm L x 750mm W

Modules on C-frame (570 mm D x 535mm H) approx. (castors type)

One Drawer & One Shutter- 450mm W

Filler panel /Closing Panles

900 H Table (side panel)

750 Side Table ( back panel)

Reagent Rack

Reagent Rack island Table :- 2 Tier Structure with provision for Switch and socket cutout provision. Both shelves will have 3mm friction glass fixing on top. Two shelves of 380 mm depth are adjustable and part will have storage cabinet aggange.

Size:- 4000Lmm x 400/380 + 300mmW x 1200 H

Sink / Peg Board/Taps / Utility

Big PP sink Outer size: 24" L X 18" W X 12" D & Inner size: 22" L X 16"W X 11" D approx.

Peg Board Big size: 750mm L X 750mm H ( 30 Pegs.) with SS Collection Tray to be fixed MS stand

Worktop mounted handed Eye wash

Two way utility Tap (Far-Italy)

One Way Mixer water Tap- (Far-Italy) (Hot & Cold)

PVC Waste Pipe

2 compartment Service Droppers in Lab 300mm L X 100MM D X 2300mm H

Electrical Trunking (Box structure)

Electrical Trunking:- Box structure single side and corner with provision for Switch and socket fittings. (Wall Table)

Size:-6000 mm L x 120 mm W x 120 mmH

Switch & Sockets

Electrical 6 Pin shutter socket with Piano switch including module plate 5/15A , (Northwest/ Norisys Make) With Wiring (2.5 Sq.mm FRLS)

Data Point With Wiring (CAT-6 wire )

Chemical storage Cabinets (CSC)

Floor Mounted Full Height Chemical Storage Cabinets (Two numbers Toughened Glass Door and phenolic resin laminate liner with Four adjustable shelves & one fix shelf , each shelf will have 2nos. PP tray) Total PP Trays 10 Nos. Size:- 1000Lmm x 450mm W x 1800 mmH

Floor Mounted Full Height Chemical Storage Cabinets (Two numbers Toughened Glass Door and phenolic resin laminate liner with Four adjustable shelves & one fix shelf , each shelf will have 2nos. PP tray) Total PP Trays 10 Nos. Size:- 750 Lmm x 600 mm W x 1800 mmH

Centrifugal Blower with motor including assocessories complete. (1.5/2 HP)with DOL Starter for Centrifugal Blowers, base frame, vibration isolators, weather cowl, Stack support, wire mesh for bypass, blower inlet PP flange, inlet & outlet flexible connection for Blowers.

Glassware storage Cabinets (GSC)

Glassware storage Cabinets (GSC) in CRCA MS/ GI Structure GI Structure epoxy powder coated construction, five nos. adjustable shelf, double skin glass doors with SS Handles, Size:-1000Lmm x 450mm W x 2100 mmH (approx.)

Storage Cabinets

Wall Mounted Overhead File Cabinets (Float Glass Door) GI Structure Two Shutter with one adjustable shelf Size:- 750Lmm x 370mm W x 750 mmH (approx.)

Lab Chairs/ stools

Medium Back Chair on castors, 4 bend PU Arms, Chrome Plated Pipe Frame & Base, Synchro Mechanism & Gas Lift, Seat and Back Letherite Tapestry.

High Rise Revolving stool (Black seat cover) with cushion in seat & lumber support at back, SS metal stand with ring type foot rest & castors & Gas Lift

GAS DISTRIBUTION SYSTEM

Semi-Auto-change over regulator for nitrogen, Brass Chrome Plate, Inlet 230 Bar, Outlet Avg. 14 bar, Inlet Connection NPTF 1/4'',Internal gas purging module, with Safety relief Valve, One cylinder connection in each side including SS bull nose, flexible hose (4 n0.) & cylinder bracket. (BRASS)

Cylinder Manifold, 4 Cylinder inlet along with manifold Block, shut off valve on each side with wall mount & clamp.

Cylinder Bracket with Chain and MS supporing fram

Connector for Change Over Panel outlet (1/4" MaleX1/4" OD). (SS304)

Source Connector for VP/AC/PC/RA

Ball Valve - 1" Flanged End. (SS304)

Flanges - 1" (SS304)

Ball Valve - 1/2" OD (SS304)

Ball Valve - 1" OD (SS304)

Tube - 1" OD (SS304)

Tube 1/2" OD (SS304)

Tube 3/8" OD (SS304)

Liquid Pressure Gauge with necessary connectors & conmplete fitting

Vacuum Pressure Gauge with necessary connectors & conmplete fitting

Line Pressure Gauge with necessary connectors & conmplete fitting

13 mm Insulation for Chilled Water In & Out (1"OD) (Nitrile)

13 mm Insulation for Chilled Water In & Out (1/2"OD) (Nitrile)

Tee 1"X1"X 1" OD (SS304)

Reducing Tee 1"X1"X 1/2" OD (SS304)

Tee 1/2"X1/2"X 1/2" OD (SS304)

Reducing Tee 1/2"X1/2"X 3/8" OD (SS304)

Elbow - 1" (SS304)

Reducer 1" X 1/2" OD (SS304)

Reducer 1/2" X 3/8" OD (SS304)

Connector 1/2" BSPF x 3/8" OD For Bench (SS304)

Connector 3/8 NPTM x 3/8" OD For FH (SS304)

Connector 1/2" BSPF x 1/2" OD For Sink/Bench (SS304)

Reducing Union 3/8" OD x 1/2" OD For Sink (Mixture Valve) (SS304)

Connector 3/8 NPTM x 1/2" OD For FH (SS304)

Profile (Aluminium)

Clamp set 1" (PP)

Clamp set 1/2" (PP)

Clamp set 3/8" (PP)

Tagging (Acrylic)

Tube supporta wall & ceiling including Hardware (Tee nut, anchoring bolt, screws, nuts, washers, etc.)

Orbital welding charges

Electric Geyser (Instant type), 3 LPM, 3 KW, 6 lts. Tank capacity, fibre/metalic body of 69.5 Deg C temperature output and Source Connector including electrical fitting and fixtures (switches & sockwts) as per required complete.

Two Stage, Air Cooled Screw type Air Compressor with receiver, motor, drier, filters (pre & After) - 10 CFM capacity with necessary Lubricant oil of 05 lts. including electrical fitting and fixtures (MCB cable etc.) as per required Technical Specification complete.

Vacuum Pump with Motor, vacuum gauge, Switch, Silencer, 500 Lts. Receiver etc. - 20 CFM capacity with 29" of Hg maximum vacuum, with necessary Lubricant oil of 05 lts. including electrical fitting and fixtures (MCB cable etc.) as per required Technical Specification complete.

Air Cooled, Screw type, Industrial Process Chiller, 2 TR capacity of outlet temperature from Chiller 6° C. with inbuilt re-circulation Pump of discharge 40-50 LPM, including electrical fitting and fixtures (MCB cable etc.)as per required Technical Specification complete.

DRAINAGE & WATER SUPPLY LINE

Water supply line

Supply and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS 15801, UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, i/c fixing the pipe, Unions,Reducer,Coupling,Tee, Reducer tee, Elbow, Male adapater, Female adapter,End cap, Brass couplings, Flange, Gaskets, with clamps at 1.00 m spacing metal supports etc.

PPRC pipe - 25 mm OD, 3.4 mm (SDR-7.4)

PPRC pipe - 20 mm OD, 3.4 mm (SDR-7.4)

PPRC Ball Valve - 25 mm OD, (SDR-7.4)

PPRC Ball Valve - 20 mm OD, (SDR-7.4)

Drainage line

Supply, laying, joining,testing and commissioning of 75 mm dia HDPE pipeline with necessary slope. The rate quoted shall include for necessary fitting with Coupling, Tee, Elbow, Flange, Gaskets, clamps,Adhesives solution, Metal supports etc.

ELECTRICAL WORK

Point

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular type switch, phenolic laminated sheet, suitable size G.I. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. (12 no for Room No.-306)

Group C

Light/ fan/ exhaust and accessories

Supplying and fixing of 2'x2' recess mounted LED fixture with 25-30 watts lamp (Make - Phillips/ Bajaj/ Crompton Greaves/Havells/Wipro) (4 no for Room No.-306)

Supply and fixing of wall mountain fan 16" . (Make- Bajaj/ Crompton Greaves/ Havells)(5 no for Room No.-306)

MISCELLANEOUS

Replacement of old damaged floor tiles and refixing of vitrified floor tiles in sizes 600 x 600 mm (thickness to be specified by the manufacturer) proved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with white cement and matching pigments, including disposal of malba etc. complete.

Construction of PCC foundation/ cement concrete work on roof top etc. for exhaust blower of fume hood as per approved drawing and design. Size (4'x4'x 8")

Supplying and fixing steel structural shed in built up tubular (4"/3"/2"/ round, square or rectangular hollow tubes etc.) including cutting, hoisting, fixing in position and applying a priming coat of pproved steel primer, including welding and bolted with special shaped washers etc. and painting complete. Fixing in precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) and related other allied work desired by Engineer -in- charge. Size (15' L X 7' W X 7' H)

Supply Installation, Testing & commissioning of 2.0 Ton split Inverter A.C (5 star rating) with 4 mm copper wire (15 mtr.), pvc condute, 16 amp rating, 240/415 volts MCB with MCB Box connections, etc. as required. Make:- Blue star, Voltas, Daikin, Hitachi, Haier

AMC charges for 1st year

AMC charges for 2nd year

AMC charges for 3rd year

AMC charges for 4th year

AMC charges for 5th year

Total of Bio-Organic Laboratory

FERMENTATION TECHNOLOGY DIVISION BENCH TOP- AUTOBYPASS FUME HOOD (6’)

Overall Dimensions: 1800 mm W X 900 mm D X 2300 mm H (approx.)

Inside Fume Hood Working Volume: 1520 mm W X 660 mm D X 1180 mm H (approx.)

Bed size: 1520 mm W X 660 mm D (approx.)

Worktop height from the ground level: 795 -800mm (approx.)

FUME HOOD SERVICES

FH Front Control Valve For Comp. Air

FH Front Control Valve for Nitrogen

FH Front Control Valve for Vaccum

FH Front Control Valve for Chilled water In

FH Front Control Valve for Raw water

FH Front Control Valve for Chilled water Out

FUMEHOOD INTERNAL PIPING

Fume hood internal piping for 6 Nos. services upto 6" above false ceiling.

FUME HOOD lighting & switches, sockets

FR PVC insulated copper conductor, single core cable in FUME HOOD lighting & switches, sockets, including Wiring (1.5 Sq.mm FRLS) for light point and (2.5 Sq. mm FRLS) for Switches. (Cable approx 30 mtr.)

GRANITE HOOD WORK SURFACE

Granite hood work surface of L=154MM, D=787MM, THICKNESS=25MM.

CUP SINK

Poly over "PP" Cup sink black

ACCESSORIES

Apparatus Storage Base Cabinet (castors)

Solvent / Acid Storage Base Cabinet (castors)

Lattice Assembly(Apparatus Holding Grid)

Airflow monitor AFA 1000/1 (Digital) TEL UK

Complete as per T.S

BLOWER MOTOR & ACCESSORIES

2HP/4P Motor with Centrifugal Blower -Medium Pressure Direct Driven PP moulded Centrifugal Blowers including suitable clamp adapter, Electro galvanized stand and 2.0 HP Motors, 1500 CFM, 1400 RPM with DOL Starter for Centrifugal Blowers, base frame, vibration isolators, weather cowl, Stack support, wire mesh for bypass, blower inlet PP flange, inlet & outlet flexible connection for Blowers.

PP/FRP DUCTING & ACCESSORIES

Supply and installation of PP/FRP ducting using 3mm thick PPGL sheets with 2mm thick FRP lining using isothelic resin including necessary bends, reducers, T-connections, upports, flanges, gaskets, nutbolts flanges & bends and inside and outside lab duct supports and enamel duct painting for exposed ducts.

EXHAUST BLOWER PANEL

Providing and fixing 1nos 30A TP MCB 25kA with distribution board, operating handle with door interlocked with release for O/L, S/C ,S/T and ON /TRIP/ OFF.

ARMOURED COPPER CABLE:

Insulated sheathed steel tape armoured Copper cable with pvc outer sheathing 1.1 KV class, (All cables shall be AS PER IS 7098)

From panel to EXHAUST BLOWERS (1 nos.) of 1.1 KW (3 PHASE) 4 Core, 6 Sqm. cable.

GRANITE WORKTOP & SKIRTING

SUPPLY & FIXING JET BLACK GRANITE TOP 20 (±2) MM THICK SUPERIOR QUALITY. THE OVERALL HANGING OF GRANITE IS 25 MM AT FRONT SIDE OF UNDER STRUCTURE. DRIP LINING BELOW THE TOPS AT 15MM FROM THE EDGE

GRANITE SKIRTING; 100 MM HEIGHT'; 20 (±2) MM THICK

C- Frame & Modules Details table wise, size depth 770 (±20) mm, Ht. 900 mm

C-frame for Wall Table - Depth 750 mm X 900 mm (H)

C-frame for Wall Table - Depth 750 mm X 900 mm (H)

C-frame for Wall Table - Depth 750 mm X 900 mm (H)

C-frame for Wall Table - Depth 750 mm X 900 mm (H)

C-frame for Wall Table - Depth 750 mm X 900 mm (H)

C-frame for Isaland Table - Depth 1500 mm X 900 mm (H)

C-frame for Corner unit - Depth 750 mm X 900 mm (H)

C-frame for Corner unit - Depth 750 mm X 900 mm (H)

C- Frame & Modules Details table wise, size depth 770 (±20) mm, Ht. 750/800 mm

C-frame for Wall Table - Depth 750 mm X 750 mm (H)

C-frame for Wall Table - Depth 750 mm X 750 mm (H)

C-frame for Wall Table - Depth 750 mm X 750 mm (H)

C-frame for Wall Table - Depth 750 mm X 750 mm (H)

C-frame for Corner unit - Depth 750 mm X 900 mm (H)

C-frame for Corner unit - Depth 750 mm X 900 mm (H)

C-frame for Corner unit - Depth 750 mm X 900 mm (H)

C- Frame & Modules Details table wise, size depth 670 (±10) mm, Ht. 750 mm

C-frame for Wall Table - Depth 650 mm X 750 mm (H)

C-frame for Wall Table - Depth 650 mm X 750 mm (H)

Modules on C-frame (570 mm D x 635mm H) approx. (castors type)

One Drawer & One Shutter- 450mm W(535 mm D x 535mm H)

One Drawer & Two Shutters- 600mm W

One Drawer & Two Shutters- 750mm W

One Shutter Corner Unit- 900mm L x 900mm W

Modules on C-frame (570 mm D x 535mm/570 H) approx. (castors type)

One Drawer & Two Shutters- 600mm W

One Shutter Corner Unit- 900mm L x 900mm W

Filler panel /Closing Panles

900 H Table (side/back panel)

750 H Table (side/ back panel)

Reagent Rack

Reagent Rack island Table :- 2 Tier Structure with provision for Switch and socket cutout provision. Both shelves will have 3mm friction glass fixing on top. Two shelves of 380 mm depth are adjustable and part will have storage cabinet aggange.

Size:- 3600Lmm x 400/380 + 300mmW x 1200 H

Sink / Peg Board/Taps / Utility

Big PP sink Outer size: 22" L X 18" W X 12" D & Inner size: 19" L X 15"W X 11" D

Peg Board Big size: 750mm L X 750mm H ( 30 Pegs.) with SS Collection Tray.

Worktop mounted handed Eye wash

One Way Mixer Tap- (Far-Italy) (Hot & Cold)

PVC Waste Pipe

Water supply line

Supply, laying, joining,testing and commissioning of CPVC pipeline with necessary slope.The rate quoted shall include for necessary Unions,Reducer,Coupling,Tee, Reducer tee, Elbow, Male adapater, Female adapter,End cap, Brass couplings, Flange, Gaskets, clamps,Adhesives solution, clamp set & Metal supports etc.

CPVC pipe - 20 mm OD, 3.4 mm

CPVC Ball Valve - 20 mm OD,

Drainage line

Supply, laying, joining,testing and commissioning of 80 mm dia HDPE pipeline with necessary slope. The rate quoted shall include for necessary fitting with Coupling, Tee, Elbow, Flange, Gaskets, clamps,Adhesives solution, Metal supports etc.

Electric Geyser (Instant type), 3 LPM, 3 KW, 6 lts. Tank capacity, fibre/metalic body of 69.5 Deg C temperature output, including Source Connector (PPRC), electrical fitting as per requirement complete.

Electrical Trunking (Box structure)

Electrical Trunking:- Box structure single side with provision for Switch and socket fittings. (Wall Table)

Size:- 3600mmL x 120mm W x 120 mmH

Size:- 1800mmL x 120mm W x 120 mmH

Size:- 1500mmL x 120mm W x 120 mmH

Size:- 750mmL x 120mm W x 120 mmH

Size:- 2800mmL x 120mm W x 120 mmH

Size:- 7500mmL x 120mm W x 120 mmH

Size:- 2500mmL x 120mm W x 120 mmH

Size:- 3700mmL x 120mm W x 120 mmH

Size:- 5300mmL x 120mm W x 120 mmH

2 Compartment Service Droppers In Lab 300Mm L X 100Mmd X 2100Mm H

Switch/Sockets

Electrical 6 Pin shutter socket with Piano switch including module plate 5/15A , (Northwest/ Norisys Make) With Wiring (2.5 Sq.mm FRLS)

Data Point With Wiring (CAT-6 wire )

Voice Point With Wiring (0.5 Sq. mm FR )

Chemical Storage Cabinets

Floor mounted Full Height Chemical storage Cabinets (Two numbers Toughened Glass door and phenolic resin laminated liner with four adjustable shelves & one fix shelf, each shelf will have 2 nos. tray) Total PP trays 10 Nos. Size:- 1000Lmm x 450mm W x 1800 mmH

Glassware storage Cabinets (GSC)

Glassware storage Cabinets (GSC) in CRCA MS/ GI Structure GI Structure epoxy powder coated construction, five nos. adjustable shelf, double skin glass doors with SS Handles, Size:-1000Lmm x 450mm W x 2100 mmH (approx.)

Storage Cabinets

Wall Mounted Overhead File Cabinets (Float Glass Door) GI Structure Two Shutter with one adjustable shelf Size:- 750Lmm x 370mm W x 750 mmH (approx.)

Lab Furniture

Medium Back Chair on castors, 4 bend PU Arms, Chrome Plated Pipe Frame & Base, Synchro Mechanism & Gas Lift, Seat and Back Letherite Tapestry.

Visitor Chair, PU Arms, Pipe Frame , Seat and Back Letherite Tapestry.

High Rise Revolving stool (Black seat cover) with cushion in seat & lumber support at back, metal stand with ring type foot rest & castors & Gas Lift

Sliding Door Unit (1200mm (W) x450mm (D) x1200mm (H))

CLASS II BIOLOGICAL SAFETY CABINET

Bio safety Cabinet Class II, fitted with ULPA/ HEPA filters with min 99% efficiency against 0.3 µm particles. Automatic balance of inflow & downflow air velocities. Digital airflow verification alarm, tested & certified to NSF/ANSI 49. Size 1200 x 900 x 2400 ( LxWxH), as per attached Specification.

FIRE ALARM SYSTEM

Supply Installation, Testing & commissioning of Smoke Detector , Make:- Honeywell

Supply Installation, Testing & commissioning of AUDIBLE VISUAL DEVICES SOUNDER , Make:- Honeywell

Supply Installation, Testing & commissioning of Heat Sensor , Make:- Honeywell

Supply Installation, Testing & commissioning of Unique ‘Plug & Play’ installation concept, Re-settable operating element option, Analogue addressable communications, Fully compliant with EN54, Part 11, Backward compatibility, Enhanced aesthetics, Integral LED, Integral Semi-Flush or surface mounting, loop isolation option Manual Call Points, Make:- Honeywell

Supply Installation, Testing & commissioning of 12V 7 AH Battery

Supply Laying Installation, Testing & commissioning of FRLS Cable (Normal Cable)

Supplying , Laying and fixing in position of the following sizes of exposed/concealed ISI Mark PVC conduit including all accessories complete as required and as per specifications.

Providing and fixing 25 mm dia 2mm thick conduit with all fitting assocessories as complete.

MISCELLANEOUS

Removal and refixing ceiling tiles from existing false ceiling on the time installation of PP/FRP ducting and fire alarm system or any other related work. (if during fixing of exhaust duct or laying of cable for fire alarm system, existing false ceiling will be damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account)

Supply Installation, Testing & commissioning of 2.0 Ton split Inverter A.C (5 star rating) with 4 mm copper wire (15 mtr.), pvc condute, 16 amp rating, 240/415 volts MCB with MCB Box connections, etc. as required. Make:- Blue star, Voltas, Daikin, Hitachi, Haier

Supply Installation, Testing & commissioning of 1.5 Ton split Inverter A.C (5 star rating) with 4 mm copper wire (15 mtr.), pvc condute, 16 amp rating, 240/415 volts MCB with MCB Box connections, etc. as required. Make:- Blue star, Voltas, Daikin, Hitachi, Haier

Supply Installation, Testing & commissioning of 1.0 Ton split Inverter A.C (5 star rating) with 4 mm copper wire (15 mtr.), pvc condute, 16 amp rating, 240/415 volts MCB with MCB Box connections, etc. as required. Make:- Blue star, Voltas, Daikin, Hitachi, Haier

AMC charges for 1st year

AMC charges for 2nd year

AMC charges for 3rd year

AMC charges for 4th year

AMC charges for 5th year

Total of Fermentation Lab

LAB NATION