PROVIDING INTERNAL and EXTERNAL ELECTRICAL INSTALLATION WORK FOR REDEVELOPMENT and BEAUTIFICATION K SHRENI SHRI LAXMI NARAYAN and SHIV TEMPLE COMPLEX AND ITS PREMISES AT NAGPUR. SECOND CALL

Rates are exclusive of GST

INTERNAL ELECTRIFICATION Supplying and erecting HMS PVC conduit FRLS grade 25 mm dia. withnecessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC.

Supplying and laying HMS PVC conduit FRLS grade 25 mm dia with necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC.

Supplying and erecting HMS PVC conduit FRLS grade 32 mm dia. With necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC.

Supplying and laying HMS PVC conduit FRLS grade 32mm dia. With necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC.

Supplying and erecting mains with 2x1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW

Supplying and erecting mains with 1x1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW (For Earth- green color )

Supplying and erecting mains with 2x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW(for power & IP comp board circuit)

Supplying and erecting mains with 1x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW(for power & IP comp board circuit) ( Rate reference taken from Note-1)

Supplying and erecting mains with 2x4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW

Supplying and erecting mains with 1x4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW

Supplying and erecting mains with 4x4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specificationNo:WG-MA/BW(NOTE-1)

Supplying and erecting mains with 4x6 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW(NOTE-1)

Supplying and erecting mains with 1x6 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW(NOTE-1)

Supplying and erecting mains with 2x10 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW

Supplying and erecting mains with 1x10 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW

Supplying and erecting modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete.

Supplying and erecting modular type switch 16A duly erected on provided plate and box with wiring connections complete.

Supplying and erecting modular type D.P. switch 32A with indicator, duly erected on provided plate and box with wiring connections complete. (for AC-17)

Supplying and erecting modular type 3 pin 6A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting modular type 3 pin 6 / 16A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting modular type T.V. socket single outlet, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting modular type (two module) electronic step regulator for fan, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 1 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 2 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 3 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 6 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

Point wiring for light/bell hybrid type (Surface type under false ceiling and concealed type for drops & switch boards on walls) in min 20 mm PVC conduit /casingn capping with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification No: WGPW/HW

Point wiring for ceiling fan (Surface type under false ceiling and concealed type for drops & switch boards on walls) in min 20 mm PVC conduit / casing n capping with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification No: WG-PW/HW

Secondary point wiring for additional light/ bell point, concealed type in min 20 mm FRLS grade PVC conduit with 1.5 sq.mm. (2+1E) FRLSH grade copper wires with required accessories as per specification No: WG PW/CW

Wiring for plug on board with Switch socket surface/concealed type, copper wiring and earthing and with modular accessories as per specification No: WGPW/ CW

Supplying erecting ready to useRetrofitT8 LED18/20 tubelight with polycarbonatebody,heatsink,integrated Hfelectronic driver complete & compatible toT8/T12LED luminaire by disconnecting starter & ballast if necessary.

Supplying and erecting LED square / circular Max. 7W down lighter/ Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 770 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty.

Supplying and erecting LED square / circular Max. 11 W down lighter/Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 1200 Lumens, min. efficacy of110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty.(For Walking Shed Lighting)

Supplying and erecting LED square / circular Max. 18 W down lighter/ Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 2000 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty.

Supplying and erecting LED square / circular Max. 25 W down lighter/Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 2750 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty.

Supplying and erecting Concealed type foot/step light Max. 5W having IP67. IK10 rated Pressure die cast housing having system lumens output of Min. 500 Lumens, min. efficacy of 100 lumen/W, CRI>80, CCT upto 5000K, Beam Angle of 110 deg., THD<10%, SDCM<5, p.f. >0.95, operating range of 230-270V, surge protection of 2.5 kV, Life class of 25,000 Hrs. at L70B50, including driver by making necessary arrangement/recess in wall to make it flush with surface with 2 Year warranty.

Supplying and erecting fresh air cum exhaust fan of light duty 250 V A.C. 50 cycles 225mm. 1400 RPM rust proof body & blades, wire mesh, duly erected, complete.

Supplying and erecting Energy Saving BLDC Ceiling fan 230 V A.C. 50 cycles 1200 mm, max. energy consumption of 28W having service ratio (CMM/W) of Min. 8 , PF>0.9, THD<10% with IR remote control/compatible speed regulator, Temperature Rise of Max. 40 deg. C, having external mounted control PCB completely erected in position as per specification no. FG-FN/CF

Supplying & fixing anchor type fastener fan hook, with 2 nos. of 10 mm dia x 75 mm long with necessary materials for ceiling fan.

Supplying and erecting ‘B’ class G.I .pipe / M.S. pipe down rod duly painted for fan complete erected with PVC three core flexible cable 1 sq. mm copper PVC wire.

Supplying, erecting & marking SPMCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting & marking SPMCB 6A to 32A, D-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB (NOTE-2)

Supplying, erecting & marking SPMCB 6A to 32A, B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting & marking DPMCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting & marking TPMCB 6A to 32A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MC

Supplying, erecting & marking TPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting & marking FPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Supplying & erecting triple pole and neutral distribution board (TPNDB),SPMCB of 4 ways/phase (12 poles), with door, 1.2mm thickness,surface/flush mounted, IP 43 protection on iron/GI frame (horizontal busbar type) as per specification no. SW-SWR/MCBDB

Supplying & erecting triple pole and neutral distribution board (TPNDB),SPMCB of 8 ways / phase (24 poles), with door, 1.2mm thickness surface/flush mounted, IP 43 Protection on iron/GI frame (horizontal busbar type) as per specification no. SW-SWR/MCBDB

Supplying & erecting triple pole and neutral distribution board (TPNDB),SP/TP MCBs total 4 ways /12 Poles, with door, 1.2mm thickness surface/flush mounted, IP 43 Protection on iron/GI frame (vertical busbar type) as per specification no. SW-SWR/MCBDB

Supplying & erecting triple pole and neutral distribution board (TPNDB), SP/TP MCBs total 8 ways /24 poles, with door, 1.2mm thickness surface/flush mounted, IP 43 Protection on iron/GI frame (vertical busbar type) as per specification no. SW-SWR/MCBDB

Supplying & erecting CRCA sheet metal one way enclosures of 1.2mm thickness suitable for DP MCB /TP MCB/FP MCB/RCCB/RCBO complete erected on angle iron/GI frame.

Supplying & erecting triple pole and neutral distribution board (TPNDB), 3 pole/ 4 pole MCCB as incomer & outgoing SP MCB (12 poles) or TP MCB of 4 ways (12 poles), with door, 1.2mm thickness, surface/flush mounted, on iron/GI frame (vertical busbar type) as per specification no. SW-SWR/MCBDB1

Supplying & erecting triple pole and neutral distribution board (TPNDB), 3 pole/4 pole MCCB as incomer & outgoing SP MCB (24 poles) or TP MCB of 8 ways (24 poles), with door, 1.2mm thickness, surface/flush mounted, on iron/GI frame (vertical busbar type) as per specification no. SW-SWR/MCBDB1

Providing & erecting 3 Pole MCCB, 415 V, 100A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact. MCCB with phase barriers on both sides, insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-SWR/MCCB

Supplying, fixing and commissioning 4 pole RCBO 6/10/16/20/25A, with overcurrent, rated short-circuit breaking capacity (10 kA) and earth leakage protection, with 30/100/300 mA sensitivity and short circuit and earth leakage trip indications per specification no SW-RCCB/RCBO

Supplying, fixing and commissioning 4 pole RCBO 32/40A, with overcurrent, rated short-circuit breaking capacity (10 kA) and earth leakage protection, with 30/100/300 mA sensitivity and short circuit and earth leakage trip indication as per specification no SW-RCCB/RCBO

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 25 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 16 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 4 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 6 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

MAIN DISTRIBUTION PANEL Supplying, erecting & marking TPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting & marking TPMCB 6A to 32A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Providing & erecting 4 Pole MCCB, 415 V, 100A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact. MCCB with phase barriers on both sides, insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-SWR/MCCB

Supplying and erecting metal work in CRCA sheet including Iron work for supports with fabrication of boxes, panel boards, etc. including cutting, bending, drilling, welding, riveting, treated with anti-rust treatment and duly powder coated or painted with one coat of red lead paint and 2 coats of enamel paint complete.

Supplying and erecting iron work, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.

Supplying and erecting self-locking arrangement with keys in duplicate, made of brass of grade 1 compliance to IS 729-1979 duly erected, flush with surface of panel / cupboard

Supplying and erecting of any size electrolyte aluminium patti or bar in bus bar chamber / in panel or any other purpose, 500 V with require capacity 99.9% aluminium purity with E91E Grade as per IS 5082 & Current Density 0.8 A per sq. mm. with fixing arrangement (like lug or bottle type lug) to both the end with high grade polyolefin insulation sleeve complete as per specification no. BCPBB

Supplying and erecting LT CT multifunction DLMS compliance energy meter of accuracy of class 0.5 , 3x240V,50 Hz with optical & RS 232 port, backlit LCD, measure & display trivector energy, load survey, TOD, tamper detection & logging, power ON /OFF events, instantaneous parameters of rating 1/5 A with display in absence of power complete with zero adjustment & test certificate from manufacturer erected on provided M.S. box and connected to CTs.

Supplying & erecting LED type indicating pilot lamp with LED colours red / yellow / green, 230 / 250V on provided box / panel with necessary material, wiring & connections etc.

Supplying & erecting LED type indicating pilot lamp with LED colour blue, 230 / 250 V on provided box / panel with necessary material, wiring & connections etc.

Supplying, installation & marking of surge arrestor/ surge protection device at the sub main distribution board after the incoming breaker of type 2 tested for Imax 40 kA for three phase and neutral with compliance to IEC 61643-11 as per specification no. CP-SPD

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 120 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 150 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying and laying (including excavation of suitable width & depth up to 90 cm) 160 mm outside dia, double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.

Supplying, installation and testing of maintenance free earthing comprising of Electrode of 17.2 mm diameter Low Carbon Steel with 250 micron molecular copper bonded earthing rod of Length 3m along with 25 kg Carbon based environment friendly back fill ground enhancing compound required to fill up the excavated earth with required quantity complete, and recording the results Specification no. EA-MOBI

Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm with funnel with a wire mesh for watering and brick masonry block C.l. cover complete with all materials, testing & recording the results as per specification no. EA-EP

Supplying and erecting GI strip of high purity required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint with joints required. As per specification no EA-EP.

Supplying & erecting conventional spike type air termination suitable to carry lightning stroke made up of heavy gauge 40 mm dia copper pipe of standard length with 5 Nos. copper spikes fixed on copper ball as air terminals duly threaded in copper pipe erected on provided foundation complete.

Supplying and erecting annealed bare copper wire of high purity of required sizes used for earthing on wall with necessary copper clamps fixed on wall/cable/conduit with screws complete.

Supplying and erecting aluminium strip of required sizes used for earthing on wall and/or any other purpose with necessary aluminium clamps fixed on wall with insulating and non-corrosive bond with required joints. As per specification no. EA-EP.

EXTERNAL STREET LIGHTING WORK Supplying and erecting PVC insulated PVC round sheathed 2.5 sq.mm (50 no. x 0.25 mm dia.) 3 core flexible multi stranded copper Industrial cable for voltage grade up to 1.1 Kv(For Façade Lights of WT)

Supplying and laying HMS PVC conduit FRLS grade 25 mm dia with necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC.

Supplying and erecting integrated LED street light fitting 40 to 50W IP65 & IK08 class having single piece pressure die-cast aluminium housing, having system lumens output of Min. 4400 Lumens, min. efficacy of 110 lumen/W, CRI>70, CCT upto 6500K,THD<10%, p.f. >0.95, operating range of 140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50, including driver complete with 3 Years warranty as per specification No FG-ODF/FLS2.

Supplying and erecting integrated LED flood light fitting Max. 155W IP65 & IK07 class having pressure die-cast aluminium housing, having system lumens output of Min. 18600 Lumens, min. efficacy of 120 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.90, operating range of 140-270V, inbuilt surge protection of 4 kV, Life class of 50,000 Hrs. at L70B50, including driver with U shaped bracket with 3 Years warranty as per specification No FG-ODF/FLS2.

Supplying and erecting integrated LED Bollard Cylindrical/Cubical shaped 500mm 8W IP65 & IK10 class having extrusion aluminium housing with polycarbonate diffuser, having system lumens output of Min. 800 Lumens, min. efficacy of 100 lumen/W, CRI>80, CCT upto 6500K, THD<10%, p.f. >0.90, operating range of 140-240V, inbuilt surge protection of 2 kV, Life class of 25,000 Hrs. at L50B50, including driver complete with 2 Year warranty as per specification No FG-ODF/FLS2.

Supplying and erecting LED Strip light 5m Length Max. 95 W IP20 class having minimum lumens output of 1600 Lumens/m, min. efficacy of 90 lumen/W, CRI>80, CCT upto 5000K, Beam Angle of 110 deg., THD<10%, p.f. >0.95, operating range of 230-270V, Life class of 30,000 Hrs. at L70B50 including driver with 1 year warranty.

Supplying, erecting & marking SPMCB 6A to 32A, B-series with rated short-circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 6 sq. mm. Aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 10 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 50 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V,2 core 2.5 sq. mm. COPPER conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no.CB-LT/CU

Supplying and laying (including excavation of suitable width & depth up to 90 cm) 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.

Supplying & erecting FRP box of size 150mm x 125mm x 100 mm, 2.7 mm thick complete on pole/wall as per specification No. CB-SB

Supplying and erecting 12.5 m (clear height) motorized high-mast (Top -150mm, Bottom- 360mm) hot dipped galvanized material with average minimum thickness 65 micron, made from high tensile structure grade steel as per BSEN - 10025 S 355/E350 & 3mm thickness, with base plate 25 mm thick x OD 520 mm grade as per IS-2062, pole made in single section & submerge arc welded, with lowering & raising motorized unit, wire rope stainless steel 316 grade 2 nos., 7x19 construction 5mm, SG-DG U clamps, double drum with assembly 250 kg, 5x2.5 Sq.mm. flexible copper cable with lantern carriage assembly suitable for max. 12 nos. luminaires and its control gear box, lightning arrestor, arrangement for fixing aviation light, high-mast with serial number, factory inspection report/test report of high-mast should be provided as per specifications on provided foundation J type stud/bolts with necessary accessories complete as per specification no. OHPL/ HM (excluding luminaries)

Providing & erecting 6 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 130 mm A/F, top 70 mm A/F on provided foundation as per specification no. OH-PL/OPL

Providing and erecting galvanised 1000mm single arm sword type bracket with FRP dome and ball as per specification no. OH-PL/PBKT

Providing and erecting galvanised 1000mm double arm sword type bracket with FRP dome and ball as per specification no. OH-PL/PBKT

Supplying and erecting outdoor stand mounted feeder pillar for high-mast of the same manufacturer with 32A TPN MCB incomer, 24hr astronomical time switch with minimum 5 years battery backup, IP 54 and IK10 protection, 25 A TP contactor for automatic switching of luminaires, 2 no. 9A contactors and raise/lower push button, and provision for termination of adequate size of incoming and outgoing cables complete erected in min. 14 SWG CRCA sheet box with supporting angles, self lock, gasket and slanting top erected on CC foundation complete.

Providing pipe type earthing with 40mm. dia. G.I. pipe or 20 mm dia. G.I. Rod complete with all materials testing and recording the results as per specification no.EA-EP

Supplying and erecting GI WIRE of high purity required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint with joints required. As per specification no EA-EP.

Making M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq.m at 1.5 m depth including supply of steel, concrete, excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 6m to 8m high octagonal /conical GI pole).

Excavating soft murum / soft soil road by chiselling for preparing pit for poles stay or earth plates or for laying cables, pipes & clearing the site by removing debris & making the site good complete.

Making M- 20 cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq. m at 2 m depth including excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 12.5 m raising lowering high mast).

AESTHETIC FAÇADE LIGHTINING Supply of high quality RGBW Floodlight projector having presies beam angle as per design or inte resurement suitable for façade lighting appanens routing to be male of pronome the cart Aluminum with excellent heat management system to ensate proper heat disipation and thermal stability of the luminare. The luminare shall have electrostatically applied polyester nowter coating hinh Lunsinars shall be suitable to operate in a temperature range of -10°C to 50°C, LED fe should be at leart 50.000 burning hours at 170 at 35°C. The lam shall be made of anti aging & anti UV-PMMA material unit able to mimise hot spets & fringing in color mieng to Insure proper light distribution. Suitable for outdoor weather proeficonenior's having P ingress protection. Transparend toughened glass having maart resistance protection of a Luminaire should have DMX-512 control protocol an should have inbuilt DMX datoder chip. The luminaire shall have system wage 70 75W and system lumen output of not less than 2500 lumens, Baam angle should be as 4 narrow 15/25 Degree/As per site condition, The fature shall haur an integral driver with input voltage for 220-240 VAC, 50/60H, power factor x 0.00 somalying to dis standard "1510322, Color Temperature RGBW, Durrating Temperature: -10°C to +50°C, Operating Humidity: 10% 90%, LED Makes should be CREE, LumiŁO, Osram, Seoul, Nichia, Bridgelux to insure higher lumen output and brightness with SMD LED chips. Luminare should have pre wired integral male/femals waterproof connectars as per S standard for DMX Lato inglout facility. The successful bidder shall submit the following certifications/reports for approval before supply a materials product data sherts, LM79 report from NAll accredited lab, polar turve LM80 report issued by LED manufacturer along with the 815 certificate

Supply of high quality RGBW Unsar wall washer having macies beam angle in per design or site requirement suitable for ficude lighting applications. Housing to be made of extruded Aluminium aldy with excellent heat management system to ensure proper heat dissipation and thermal stability of the luminaire The luminare shall have electrostatically applied polyester powder coating firus Luminaire shall be suitable to operate in a temperature range of -10°C to 50°C, LED life should be at least 50,000 hurting hours at 170 at 35°C. the lons shall be made of anti-aging & anti UV-PMMA material and able to minimize hot spots & fringing in color mixing to lesure proper aght distribution, Sultable for cuminor weather pracf conditions having 166 ingreis protection. Transparent toughened glass having mpact resistance protection of IKO. Luminaire should have DMX-512 control protocol and should have inbuilt DMX decoder chip. The luminaire shall have system wattage 24W and system lumen output of not less than 1010 lumens, Beamangie should be No narrow: 10x60/15x45 Degree/As per the condition, The fistine shall have mout voltage for 24V DC, external high efficiency driver having power factor 0.90, Surge protectice 4KV and other protections including OCP, OVP, SCP, OTP shall the providad, Luminaire compiving to 8/5 standard "15 10327" Color Temperature RGBW, Operating Temperature 10°C to +50°C. Operating Humidity: 10% 90%, LED Makes should be CREE, LumilLED, Osram, Snool, Nichia, Bridgetus to insure signer lumen output and brightness with SMD LED chips. Luminaise should have pre wires integral male/female waterproof connectors as per S standard for DMX Loc in/out facility. The successful bidder shall submit the fol owing remifcations/reports for approval before supply of materiale: product dutu sheets, LM79 report from NABI, accredited lab, polar curve & LM80 report issued by LED manufacturer alang with the Bis certificate

Supply of RGBW Flexibile Strip with Lens with wide boom angle suitable for outdoor applications of Façade Lighting Silicon/PU Moulded Flexible tubes with vertical bending option, Power Consumption should be between 15-20W/m with 40/60 beam angle. Ingress Protection should be IP 67 or higher. The title shall have input voltage for 24V DC, external high efficiency driver having power factor>0.90. Surge protection 4KV and other protections including OCP, OVP, SCP, OTP that be provided. The lumen maintenance 170@ 25°C of the LED shall not be less than 70% of the initial lumen after 30,000 suming hours Power supply DC 24V Operating temperature range: -10°C to +50°C

Supply of DMX Controller System with Standalone interfaces. Controller should deliver 2*512DMX channels, the controller should have future upgradation provision up to 4 DMX universe Port, the controller should have new Nicolaudie Stand Alone engine (NSA) offering some great possibilities (multi-zone, extended triggers, 16-bit channels management...), the controller should offer multiple possibilities to trigger your lighting scenes: time/date, input ports, TCP/UDP commands. Should have Intuitive backlit keyboard with 10 presets. PC DMX IN triggers:Yes, Standalone DMX IN triggers: External triggers: 10 buttons for direct access, 2 buttons to change scene,+ 1 button to change zone. 16 dry contact trigger ports via 20-Pin IDC Socket. Internal calendar: Yes, Backup of the internal clock: Yes, 3weeks without power, Memory card: Yes microSD card, 32GB max, Input power voltage: 5-5.5V DC 0.6A with power adaopter working on AC power supply,. via USB(USB power supply included), Trigger lighting scenes using calendar triggers and conditional rules with New Stand Alone engine, using contact ports, RS232 or over Ethernet. Stand Alone mode with 99 scenes across 5 zones. Buttons: iPhone/iPad/Android remote and programming apps. Temperature: 0 to +50 C°, DMX Compatibility: 8 and 16 bit DMX fixtures, System Compatibility: Windows XP, Vista, 7, 8, 8.1, 10, MAC OS X. Make: Nicolaudie/Pharos/Osram ECUE/Philips iColor (10.6 and +), Linux.: Make: Nicolaudie:

Supply,rutallation, testing and commissioning of DMX Splitter cum Booster, Input Роwеr 200 то 240 VAC, витo-ranging, 50/60 Hz, Housing rugged alluminium Operation Temperatur-174-5513199), 5/6 output ports with 3/5-pin merminal schets, wach port should be optically solated, Protection Rating IP20 nuding connection complete as required. Malie: Pioneer/Brite/Swisson

Installation Testing and commision of above items, including all accessories required for successfull operation of system, like Lighting Panel, Power & DAX/CAT-6 Cables Junction Boxes/connectors t Progaming and testing of suntrollers 1. Addressing, Pitching and Programming DMX Light Fixtures Training of the sit tashnicians 2. Creating many number of sequences as per client's requirement 3.Training of the sit tashnicians

Making rement concrete foundation in 1:3:6 cement concrete, (20 to 25) min, stone metal duly plattered with necessary curing for complete, (pole mufting or'any ather

Providing earthing with galunized iron earth plate sire 60 x 60 x 0.6 cm complete with all materials, resting fi recording the results as per specification no. FA EP

Supplying and erecting Sil earth wire of high purity of different sizes used for earthing of any other pl poses on wall with necessary G. 1. Clamps fised on walt/cable/ conduit with screws in an approved manner.

Supplying, erecting & terminating insulated, galvanised steel formed wire annouond (strip) cable 1100 V 4 core 16 Sq mm aluminium conductor complete erected with glands & lugs on wall/trusty/pole of late in provided trench/pipe amer per specification no. CB-17/AL

Supplying, erecting & terminating FR XLPE incutated, galvanised steel formed wire ammouted (strip) cable 1100 V, 4 core 4 sq mm aluminium conductor complete erected with glands & lugs on wal/tosses/pole or laid in provided trench/pipe as per specification no. CB-LT/AL

Supplying and laying (including escaviton of suitable width & depth up to 90 cm) 50 mm outside dia double wali corfugted pipes (DWC) of HDPE for enclosing cabile below ground/road surface, to redved dep coimplete. 7-6-9/2021-22

Supplying and erecting iron work, sheet mell work consoting of CRCA sheets various sections of iron, plates, chequered pites, ods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutthrilling and welding complete erected at the position with necessary materials Sar painted with one coat of red by the authority. de and two coats of enamel paint to mat the chochgears or as per directions

Supply, Installation, Testing and Comissinoning of 3000K LED Strip light with IP66,sealed with anti-UV polyurethene without colour shifting and anti-UV aging lumen output from 400Lm/mtr, 25watt/5Mtr.for 3000K Prouct with 12mm, better sealed with anti UV solvurethane without color shifting and anti-aging lumen color consistency for visual comfort, DC 24VDC, Class Il for safety use Long lifespan 30K hrs. 170850@35°C, Lead cable (1000mm) with suitabile numbers of clip, screwjerd caps, mounting tracks and waterproof connector, with 3 years warranty

Supplying, erecting & commissioning 2 pole RCCB 40A, electromagnetic type with 130/100/300 mA senaithity with earth leakage trip indication complete as per specification no. SW RECH

Supplying and mecting single pole and neutral distribution baare (SPNDB), with 2 ways for incoming and 8 ways (8 poles) for outgoing SP MCSs, with door, 1.2mm 17 thickness surface/flush mounted, 1 43 Protection on provided iron/Gi frarve as per specification ne. SW-ACBDB

Supplying, erecting & marking SP MCB SA to 32A, C-ser es with ratesl short-circuit sa breaking capacity (cm) 10kA in provided distribution board as per specification no SW-MCH

Supplying & erecting CRCA sheet metal one way enclosures of 1.2mm thickness 18 suitable for DP MCB/TP MCB/FP MCB/RCCB/RCBO complete erected on provided angle iron/Gi frame.

Supplying and erecting PVC Insulated PVC round sheathed FR 2.5 sq. mm (50 по 30 0.25mm dia core flexible muti stranded copper industrial cabile for voltage grade upto 1.1 kv

Supplying and erecting mains with 3x6 sq.mm FRUSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/lkin bars or any other places as per specification No. WG-MA/SW

SOLAR ROOF TOP SYSTEM OF 50 & 20 Kwp Supplying, installing, testing and commissioning of 25 kWp ON-GRID Solar PVSystem / Plant consisting Solar PV Mono Crystalline Panel (580-620 Wp X 81 Nos.) and Solar ON-GRID Inverter of similar capacity (THD<3%) with interconnecting wires / cables up to solar ON GRID inverter, proper base plate,canopy box to house Inverter and necessary accessories i.e. ACDB/ DCDB ,MCB etc. wiring up to solar Inverter in casing and capping, display board, signboard, two distinct earthing, lightning arrester, liaisoning charges, remotemonitoring system with maintaining card / chip for 5 years including net chargesfor RMS System, complete up to net meter installation and export to the grid with 5 year ON-SITE warranty and fully comprehensive maintenance contract asper Specification no. ESD-RT-ONG.

Supplying, installing, testing and commissioning of 20 kWp ON-GRID Solar PVSystem / Plant consisting Solar PV Mono Crystalline Panel (580-620 Wp X 33 Nos.) and Solar ON-GRID Inverter of similar capacity (THD<3%) withinterconnecting wires / cables up to solar ON GRID inverter, proper base plate,canopy box to house Inverter and necessary accessories i.e. ACDB/ DCDB , MCB etc. wiring up to solar Inverter in casing and capping, display board, signboard, two distinct earthing, lightning arrester, liaisoning charges, remote monitoring system with maintaining card/chip for 5 years including net charges for RMS System, complete up to net meter installation and export to the grid with 5 year ON-SITE warranty and fully comprehensive maintenance contract as per Specification no. ESD-RT-ONG.

Supplying and erecting iron work, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.

Supplying and erecting AC three phase LT CT multifunction net meter DLMS compliance of accuracy class 0.5, 3 x 240V, 50Hz, with backlit LCD display, optical port & RS 232 port (measures import kWh, kVAh, export kWh, kVAh, Net kWh, kVAh, V, I, kW, 6 months history of energy, load survey, TOD, tamper detection & logging, power ON/OFF events, instantaneous parameters of rating 1/5A with display in absence of power) with wiring connections and mounting hardware on provided panels complete with calibration certificate from manufacturer.

Supplying and erecting static energy meter with 3 x 240V 50 Hz. AC supply 10 to 60 A, ISI mark, accuracy class 1.0 with backlit LCD display, (Measuring and display Trivector, V, I, kW, PF, Hz, Last month history of kWh and MD in kW) with special features like TOD, Tamper logging, Optical Communication Port & Display in absence of Power & with transparent hinge type box complete erected on polished teak wood board duly wired with required size of weather proof PVC wires duly tested by electric supply company.

Supplying, erecting & terminating FR XLPE insulated, galvanised steelformed wire armoured (strip) cable 1100 V, 4 core 50 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 16 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL(For 25 Kw Site)

Supplying and erecting mains with 4x6 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW (NOTE-1) (For 10 Kw Solar System)

Supplying and erecting mains with 1x6 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW (NOTE-1)

Supplying and laying (including excavation of suitable width & depth up to 90 cm) 160 mm outside dia, double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.

Supplying and installation of Solar PV Module cleaning unit consisting of nozzles spray, necessary pipes, valves, post, electronic panel board concealed with weather proof cabinet, spreading water periodically for removal of dust, related motor pump, controller, timer and nozzles set suitable for covering 5 KW Solar PV Module. (Approx. 35 Sq. Mtr. PV Module area).

For item no. 4-8-8 for additional kW capacity, add Rs. 4000/- for every 5kW.

CCTV SYSTEM Supply, Installation, Testing & Commissioning 4MP VF Bullet-1/2.7" 4Megapixel PS, CMOS Image Sensor, Max. 4MP(2688 × 1520)@30fps, H.265+ and H.264+triple-stream encoding, WDR(120dB), Day/Night(ICR), 3D-DNR, ROI, AWB, AGC, BLC, 2.7mm~13.5mm Motorized Lens, IR Range of 60 Mtrs, IP67, IK10, Micro SD Card, PoE, IVS: Tripwire, Intrusion, Motion Detection, Scene Change., UL, CE, FCC, RoHS Image Sensor 1/2.7" 4Megapixel progressive CMOS (0.9407 centimeters) Minimum Illumination 0.005 [email protected] (Color, 30IRE) 0.0005 [email protected] (B/W,30IRE) 0 Lux (IR on) Effective Pixels 2688 (H) ×1520 (V) Shutter Speed Auto/Manual, 1/3 s~1/100000s White Balance Auto/natural/street lamp/outdoor/manual/regional custom Lens 2.7mm~13.5mm Motorized Iris Type Fixed DORI Distance W# 64.0m (Detect) 25.6m (Observe) 12.8m (Recognize) 6.4m (Identify) T# 222.0m (Detect) 88.8m (Observe) 44.4m (Recognize) 22.2m (Identify) Video Compression H.265+/H.265/H.264+/H.264/H.264H; H.264B; MJPEG Angle of View Horizontal: 104°#27° Vertical: 55° #15° Diagonal: 124° #31°

Supply. Installation, Testing & Commissioning of 2MP FullHD Network IR PTZ Camera-33X ZOOM. 1/2.8" CMOS, ICR, 1920x1080:30fps, Ultra 265/H.264/MJPEG, Triple streams, DC24V, POE, Micro SD card slot. Alarm in/out 2/1 Audio, -40-65°C. IP66. 33x optical zoom( 4.5-148.5mm), IR range: up to 150m, IR anti-reflection window. Tampering Alarm required. This product should be manufactured at OEM's( Original Equipment Manufacturer) own manufacturing plant. Accordingly BIS, UL IP67 Certificates & all their Test Reports in OEM's own name should be provided mandatonly. Also Model number, Data-sheet, OEM's Authorization & Support Certificate for this particular project should be provided mandatorily. OEM should be among top 10 suppliers for CCTV & Video Surveillance Equipments in the World Market as per IHS Rating Table WOM-1. Accordingly IHS Rating Certificate should be provided mandatorily Also OEM should be at least CMMI level-5 company & not be blacklisted anywhere in the world Accordingly written assurance over OEM's letterhead by the OEM should be provided mandatorily. Also OEM should give written assurance over OEM's letterhead about this product model that it is not end-of-life model & its spares will be available for at least 5 years from the date of installation. Also 1 year field warranty should be assured by OEM in written & in case of bidder won't provide immediate service, OEM will send their technician for the field service-such written assurance should be provided by OEM. Approved Makes-Axis, Uniview. Hanwa Techwin, Avigilon, Bosch, Johnson Controls

Supplying ,erecting, commisioning & testing Screen (108Cm)/ 43 inch specification General of Screen size 108cm x(43inch) Screen type LED HD technology and resolution Full Hd TV 1920 x 1080 HDMI, 3 USB : 1 launch year 2018, connectivity features (static) Picture Engine Hyper real view angle 178Degree panel type A+ Digital noise video features PMI 300 clarity colour , contract, active noise reduction Dynamic colour Enhancer picture mode : 8 Modes(vivid , standar, Aps, Cinema , cricket game Expert 2 Picture :JPEG Digital Noise reduction Movies support in USB mode ,MPEGH 264 , recorder response Time 6.5ms, still image , wide colour enhancer (Plus), Film mode Cricket Audio features Number of speakers : 2 , Speaker Type : Down firing with Bass reflex . Sound technology: Dolby Digital plus Speaker Output RMS:20 W Warranty, Warranty Summary : 1 year, comprehensive and warranty Summary : 1year and 1 year additional on Panel.

Supplying erecting Testing & Commissioning Camera NVR 32 Channel System specification 32ch with 4K Real -time Live Preview max 320 Mbps incoming bandwidth with H 265 compression , Decoding support upto 4 x 4 k @ 30 , 8 ( 4 MP @ 200N VIF Version 2.4 conformance VCA Bearch and Smart for playback support 8 SAT AHDD upto sara 2 USB OJ 1 USB 3.0

Supplying and Installation,Testing & Comissioning of surveliance internal HDD(hard Disk Drive) HDD Supply installation , testing and commissioning of Survilence internal HDD Recording capacity 4 TB.

Supplying and erecting HMS PVC conduit FRLS grade 20 mm dia. With necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC.

Supplying and laying HMS PVC conduit FRLS grade 20 mm dia. With necessary accessories in RCC work/false ceiling/false flooring as per specification.No: WG-MA/CC.

Supplying and erecting HMS PVC conduit FRLS grade 25 mm dia. With necessary accessories in wall/floor with chiselling appropriately as per specification No: WG MA/CC.

Supplying and laying HMS PVC conduit FRLS grade 25 mm dia with necessary accessories in RCC work/false ceiling/false flooring as per specification\ No. WG-MA/CC.

Supplying and installing cat-6 cable suitable for networking as per specification No: WG-COC/NC

Supplying, installing & testing of Connectivity to Remote Monitoring Surveillancer oom with 24core Fiber Optic Cable including fixing arrangements with excavation. foundation work and associated hardware and making good the area by back filling upto the finish area with proper compaction

Supplying and fixing 1 meter length, UTP patch cord of Cat 6 type in position as per specification No. WG-COC/PC

Supplying, installing & testing UTP connector (RJ-45) as per specification No. WG NAS/UTPC.

Supplying, fixing, and configuring 24 ports, POE switch in provided rack as per specification No. WG-NWC/ENS

Supplying and fixing 9U wall mount rack (Dimension-DxWxH – 500x600x500 mm) as per specification No. WG-NAS/RAK

Supplying and fixing 6U wall mount rack (Dimension-DxWxH – 500x600x367mm) as per specification No. WG-NAS/RAK

Supplying and fixing Power Distribution Unit for networking rack comprises of 6/16A (6 Nos. sockets), 25 A modular MCB, appropriate rating fuse andm indicator lamp, enclosed in black powder coated metal with necessary arrangement for fixing as per specification No. WG-NAS/RAK

Supplying and fixing 24 port patch panel with tool-less keystone jacks in provided U Rack complete as per specification no. WG-NAS/PP

Supplying. Installaing and fixing of 19 12U Rack with glass front door, MSbody, Top and bottom Panel with ventilation and cable entry facility, 1nos Power Supply (PDU) with cable

Supplying, installing of CCTV Camera Mounting GIPole for PTZ Camera, 4meter high, 100mm dia round section with base plate and camera fixing arrangements with excavation, foundation work and associated hardware and making good the area by back filling upto the finish area with proper compaction.

Supplying erecting and testing of power cable for PTZ Cameras of 2 core x 1.5 sq mm pair cable with PVC accessories on wall /ceiling

Supplying and fixing of 24V AC, 5A SMPS Power Supply for PTZ Cameras

Supplying, fixing, and configuring 24 ports with 4 (SFP+) port, ethernet managed switch with web view/CLI, 6KV surge protection on ethernet port and console port for management in provided rack as per specification no. WGNWC/GBS

PA SYSTEMS DBR 15 Speaker Bоx - (Output Levels up to 132db sp with 1000w of power,Extremely accurate 90x 60 constant directly horn). (Make :- JBL / Martin / Ahuja) etc completed as directed by Engineer-in-charge.

MG 16XU Mixer -(Input channel-16line inputs,24- bit/92khz 2in/2out usb audio interface function,output chanels -2st,1 monitor,4aux sends,4 group, 1phones.) (Make :- JBL / Martin /Ahuja) ete completed as directed by Engineer-in-charge.

AMH 402T Pa Musical Horn weater proof outdoo Speaker -(Input Power -40w RMS,Impedance- 250/500/1k/2kohms,Frequency Response-120- 16,000hz,SPL at 1khz 98db/1w/1m,114db/40w/1m). (Make :- JBL / Martin / Ahuja) etc completed as directed by Engineer-in-charge.

Supplying,erecting,testing and commissioning amplifier 120W for Public address system suitable to operateon 230VoltsA.C./12VoltsD.C.supply as per specification No. FF-PA/AFR

Supplying, erecting, testing and commissioning stand mounted/handheld type wired microphone having 2 mV/Pa sensitivity, impedance level limit 300 ohms and 50 - 16000 Hz suitable to operate in -10 deg C to +55 deg C with min. 7 metre shielded cable and 3 Pin Professional XLR Connector, stereo jack complete as per specification no. FF-PA/MIC

Supplying, erecting, testing and commissioning rust free microphone floor stand of chrome plating/powder coating or S.S. material , 500 mm to 1500 mm height and sturdy mechanism ensuring trouble free movement complete.

Supplying, erecting, testing and commissioning rust free microphone table stand of chrome plating/powder coating or S.S. material, up to 500 mm height and suitable base for sturdy mechanism ensuring trouble free movement complete.

Supplying, erecting, testing and commissioning of 2 core shielded cable complete as per specification no. FF-PA/MCC Makr:- (Polycab,Krystal/Chetan)

Mike Stand small SM006 Dynamite (Make :- JBL / Martin / Ahuja) etc completed as directed by Engineerin-charge

Spk Edge 2.5 2 Core Make: in Plastic Conduit (Make :- Polycab,Krystal/Chetan) etc completed as directed by Engineer-in-charge

Equipment Rack 27 U with lock & Fan. (Make :- JBL/ Martin / Ahuja) etc completed as directed by Engineerin-charge

Interconnects (Make :- Hawk/MX//Krystal) etc completed as directed by Engineer-in-charge

Supplying and erecting HMS PVC conduit FRLS grade 25 mm dia. With necessary accessories in wall/floor with chiselling appropriately as per specification No: WG MA/CC.

FIRE FIGHTING SYSTEM Supplying and installing G.I.pipe above ground of ‘C’ class ERW of size 100 mm diawith necessary fittings as per specification no. FF-PP

Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 75/80 mm dia with necessary fittings complete as per specification no. FF-PP

Supplying and erecting 100 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating, as per specification no. FF-VL/BFV

Supplying and erecting 100 mm dia cast iron double flange NRV complete with PN16 pressure rating, as per specification no. FF-VL/NRV

Supplying and erecting 25 mm dia gun metal gate valve complete with PN16 pressure rating, as per specification no. FF-VL/GV

Supplying and erecting stainless steel single outlet hydrant valve fitted with necessary accessories complete as per specification no. FF-VL/HV

Supplying and erecting brass orifice plate having 6 mm. thickness, 140 mm outer dia with required diameter of inner hole at every single outlet hydrant valve as per specification no. FF-FFA/OP

Supplying and installing wall mounting swinging hose reel drum fitted with 19 mm dia. 30m long high pressure polypropylene (Polyhose) along with necessary accessories complete as per specification no. FF-FFA/HV

Supplying and erecting 63mm dia, reinforced rubber lined (R.R.L.) hose pipe,15m in length,, fitted with necessary accessories complete as per specification no. FF-FFA/RRL

Supplying and erecting stainless steel branch pipe 63 mm dia fitted with 20 mm dia detachable hexagonal nozzle complete as per specification no. FFFFA/NZ

Supplying and erecting 150 mm dia fire brigade header suitable for supplying water in fire tank complete as per specification no. FF-FA/FBC

Supplying and erecting 20/25mm dia gun metal air release cock, with necessary G.I. coupling to be fitted on top of air vessel or on wet riser complete as per specification no. FF-FFA/ARV

Supplying and erecting 100 mm dia. pressure gauge , 0-300 PSI or 0-14 kg per cm square fitted with 12/15 mm dia. pad cock valve, erected with provided G.I. pipe, elbow etc. complete as per specification no. FF-FFA/PG

Supplying and erecting 12/15 mm dia pressure switch with provided isolation valve, G.I. nipple, elbow, etc complete as per specification no. FF-FFA/PS

Supplying and erecting M.S./CRCA cabinet for housing Fire Brigade / SIEMESE connections (size 1250 x 400 x 300 mm.) made from 16 SWG sheetand angle iron 25 mm. x 25 mm. x 4 mm. having front doors with viewing glass (8" x 6") and locking arrangement with necessary fixing material such as rubber bidding etc. duly painted in post box red colour( Code 538 of IS 5)

Providing Round bottom FIRE Bucket of 9 Litrescapacity as per IS : 2546 made out of 24 gauge G.I. sheet with extra handle at bottom duly painted white inside and red outside with FIRE Mark, on provided stand/ wall hook

Providing Floor mounting stand for keeping 4 Nos. of FIRE buckets 1500mm in length, 900mm in height frame made out of 30x30x4 mm angle iron with cross supports for legs, welded with 4 hooks and duly painted with one coat of red lead and two coats of silver paint.

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3 core 6 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, installation, testing and commissioning of booster fire pump [BP]suitable for water discharge of 900 LPM at 35 m head driven by electricmotor 415 volts, 3 phase 50 Hz, AC supply of 7.5 kW or of suitable kWcapacity for manual/automatic operation and consisting of following : (a) Horizontal/vertical type, single/multi stage, centrifugal casing pump of castiron body & bronze/CI impeller with stainless steel shaft (SS410 grade),mechanical seal conforming to IS 1520. (b) Squirrel cage induction motor, TEFC, synchronous speed 3000 RPM, suitablefor operation on with IP 55 protection for enclosure, horizontal foot mountedtype with Class-'F' insulation, conforming to IS-325. (c) M.S. fabricated common base plate, coupling, coupling guard, foundation boltsetc. as required. (d)Erected on provided suitable size cement concrete foundation duly plasteredwith anti vibration pads with perfect aligning, proper levelling complete pump setwith accessories duly painted with two coats of synthetic enamel paint of fire redcolour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete, asper specification no. FF-MFP/BP

Supplying & erecting automatic control panel for 3 Ph, 415 volt, A.C. Submersible/centrifugal pump set up to 20 HP consisting of Star Delta starter having relay range 13-21 Amp, S.P.P., Combined ammeter/ voltmeter, phase indicating lamp enclosed in CRCA powder coated Vibration proof enclosure with IP 54 protection. Control Panel should offer single phasing, phase reversal, phase imbalance etc.

Supplying & erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 kg. capacity cartridge type conform to IS 2878 /15683 complete erected with necessary clamp made from 50 x 6 mm. M. S. flat with nut & bolts routed in wall complete

Supplying and erecting ABC powder type fire extinguisher as per IS : 13849 /15683 of 6 kg capacity with necessary clamp for erection on wall

Supplying and erecting XLPEarmoured cable 2 core 1.5 sq.mm. copper conductor complete erected on wall/ceiling as per specification No.CB-LT/CU

Supplying, erecting testing and commissioning Manual Call Point with break glass, push button (Resettable Type) in metal enclosure complete as per specification no. FF-FAAS/MCP

Supplying, erecting, testing and commissioning hooters having high (100dB @ 1m) and low (94dB @ 1m) volume setting, group addressing facility allowing multipl sounders to be activated wit CRCAenclosure complete as per specification no. FF-FAAS/HT

PLUMBING PUMPS & EQUIPMENTS Supplying, erecting, testing and commissioning self contained water cooler 230/250V 50Hz nominal cooling capacity of 150 litres per hour and storage capacity 150 litres with partially stainless steel body as per specification no. APWCR/WC

Supplying and erecting ultra violet water purifier with softener for safe drinking water consisting of UV germicidal tube of 8W capacity, choke made of copper wire, two indicator lamps, dual function cartridge with output of purified water 1 litre/min with activated carbon filter and softener operating on 230V, single phase A.C. supply with UV fail & filter change indication system.

Supplying & erecting flat flexible 3 core 4 sq.mm PVC sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete.

Supplying & erecting D.O.L Starter suitable for 415 V, 3 phase 50 cycles with no volt coil and overload element with necessary materials and connected to supply up to 7.5 H.P.

Supplying and erecting minimum Three & above star rated submersible pump set suitable for erection on open well of 5.625 KW/7.5 HP with 415 V 50 c/s. A.C. supply, having delivery head from 57 to 22 m and discharge from 120 to 900 litres. . per minute & pipe of Suction 75 mm/Delivery 65 mm diameter erected with necessary H type clamps as per specification No. WP-OSP

Supplying & erecting Water level controller 230/415 V, A.C. , Two way underground tank operation only.

Please Enable Macros to View BoQ information