Loading
Loading…
Loading…
Tender Value
Refer Docs
EMD Value
₹3.2 L
Closing Date
20 Jan 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
S&T work in connection with construction of new bridge & Diversion of Bridge including track renewal work in JAJ-DDU section under Danapur Division
DNRSandTSig2025-29~ECR
DNRSandTSig2025-29
Open
Works - General
12 Months
Patna, Bihar
₹0
₹3.2 L
20 Jan 2026
27 Dec 2025
6 Jan 2026
161 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 3,46,72,747.48 | ||
| — | 440.00 | — | — | ||
| Excavation,trenching,earth work and reinstatement of track while track crossisng. (I) Payment will be made as per actual work done on pro rata basis, if required depth is not available at site. (II) If the depth of trench is not uniform in a span of 100 mtr. or shorter length, if site condition demands along the cable run minium depth will be taken for that particular stretch for payment. | — | — | — | 61,864 | |
| — | 20.00 | — | — | ||
| Reinstatenent of platform and repairing to original state after cable laying work | — | — | — | 8,034.8 | |
| — | 86.00 | — | — | ||
| Laying cable of different sizes as per cable route plan approved by Railway and meggering of all main & tail cables as per technical specification of tender. 2 core to 12 core signalling cable. | — | — | — | 10,01,942.14 | |
| — | 29.00 | — | — | ||
| Laying cable of different sizes as per cable route plan approved by Railway and meggering of all main & tail cables as per technical specification of tender.Telecom Cable/6 Quad cable. | — | — | — | 3,49,514.67 | |
| — | 1250.00 | — | — | ||
| Supply and fixing of G.I. Pipe with threaded collars of 100 mm nominal bore specn.No.IS 1239 medium grade. Perforated of required length on bridge/below metalled road/L-Xing/Culvert as per technical specification of tender. Supply portion for the G.I.Pipe & collars. Inspection RITES | — | — | — | 16,82,287.5 | |
| — | 1250.00 | — | — | ||
| Supply and fixing of G.I. Pipe with threaded collars of 100 mm nominal bore specn.No.IS 1239 medium grade. Perforated of required length on bridge/below metalled road/L-Xing/Culvert as per technical specification of tender. Execution with remaining miscelleneous materials | — | — | — | 75,325 | |
| — | 170.00 | — | — | ||
| Supply of PBT ARA terminal as per IRS SPECN No. IRS:S-75-91- 6 way. Inspection RDSO | — | — | — | 1,50,251.1 | |
| — | 10.00 | — | — | ||
| Supply of Bakelite strip/sheet of size( 950 x 75 x12) mm for fixing 30 nos. ARA terminal/ fuse base terminal/ fuse base. Inspection Consignee | — | — | — | 6,427.8 | |
| — | 43.00 | — | — | ||
| Casting,Concreting and Curing of foundation and erection for full apparatus case (GKP-type)as per DRG No.SGW/MGS/L1/91 includong cost of all materials required for fixing holding down bolts, casting, concreting and fixing of "E" type lock. Note-i)The contractor will provide holding down bolts. ii)Bottom of appratus cases should be filled with sand and the top surface covered with masonry work and neat cementing. | — | — | — | 2,67,760.14 | |
| — | 4.00 | — | — | ||
| Casting,Concreting and Curing of foundation and erection for Half apparatus case (GKP-type)as per DRG No.SGW/MGS/L1/91 includong cost of all materials required for fixing holding down bolts, casting, concreting and fixing of "E" type lock. Note-i)The contractor will provide holding down bolts. ii)Bottom of appratus cases should be filled with sand and the top surface covered with masonry work and neat cementing. | — | — | — | 20,488.8 | |
| — | 28.00 | — | — | ||
| Fixing,wiring of terminal strips,bakelite strip, transformers, relays fuses with base and supply and fixing of shelves for full appratus case. (All materials except transformers,relay,terminal strips, bakelite strip and fuses with base to be spplied by the contractor.) | — | — | — | 1,63,106.72 | |
| — | 4.00 | — | — | ||
| Fixing,wiring of terminal strips,bakelite strip, transformers, relays fuses with base and supply and fixing of shelves for Half appratus case. (All materials except transformers,relay,terminal strips, bakelite strip and fuses with base to be spplied by the contractor.) | — | — | — | 13,659.2 | |
| — | 75.00 | — | — | ||
| Supply of B-Type choke coil having anneled enamelled copper wire for DC track circuit SPECN.No.IRS-S-65/ 83(Latest) Inspection RDSO | — | — | — | 5,72,481 | |
| — | 250.00 | — | — | ||
| Supply of PBT fuse block with inserts cartridge type, to be mounted inside the location Box/ Relay Rack.- Fuses (2A,IRS:S-78/92) Inspection RDSO | — | — | — | 27,117.5 | |
| — | 250.00 | — | — | ||
| Supply of PBT fuse block with inserts cartridge type, to be mounted inside the location Box/ Relay Rack.- Fuse base (DRG No- SA23748,IRSS-75/91) Inspection RDSO | — | — | — | 80,347.5 | |
| — | 3.00 | — | — | ||
| Supply of PVC/PE insulated (2 mm minimum) stranded flexible galvanised wire of size 7/ 1.63 mm for track jumpers as per Spec.IS - 214C/ 62 and wrapping test as per clause 14 of IRS - S3 (Max. electrical resistance 12 ohm/Km. At 20 degree celcius with electrically insulating PVC extruded jacket 2 mm (Min.) thickness. Inspection Consignee | — | — | — | 1,92,835.74 | |
| — | 4000.00 | — | — | ||
| Supply of channel Pin with single groove 7.2 mm Dia for 4 mm Dia bond wire to DRG.No.S-69/M & IRS Specn.IRS:S-S17. Inspection Consignee | — | — | — | 28,920 | |
| — | 125.00 | — | — | ||
| Supply of earth electrode.Materials to be procured as per E.Rly Sketch No.SGW/T/3/G/8/89. Inspection Consignee | — | — | — | 2,51,087.5 | |
| — | 125.00 | — | — | ||
| Installation of Earth Electrode including supply of MS Flat for clamp Signalling equipment such as apparatus cases, Signal posts, etc. | — | — | — | 7,06,375 | |
| — | 62.00 | — | — | ||
| Supply of full size location box as per design of GKP signal workshop Inspection RITES | — | — | — | 17,71,473.92 | |
| — | 4.00 | — | — | ||
| Supply of Half size location box as per design of GKP signal workshop Inspection Consignee | — | — | — | 94,235.92 | |
| — | 110.00 | — | — | ||
| Supply of adjustable track feed resistance disc type 30 ohm as per RDSO Drg no. SA-20166/M/66 (adv) with latest amendments (with Phenolic moulded base) Inspection RDSO | — | — | — | 94,488.9 | |
| — | 105.00 | — | — | ||
| Painting of two coats of enamel paint over one coat of red oxide primer and there after numbering on the following items after scraping and cleaning of the surface where ever necessary .Primer and paints both Asian paint make or Similar ( Inspection Consignee) are to be supplied by the contractor.Numbering is to be as per practice of the ECR and directives of the site Engineer. Location boxes inside and outsided surfaces with Aluminium paint. Single case. | — | — | — | 1,44,042.15 | |
| — | 125.00 | — | — | ||
| Painting of two coats of enamel paint over one coat of red oxide primer and there after numbering on the following items after scraping and cleaning of the surface where ever necessary .Primer and paints both Asian paint make or Similar ( Inspection Consignee) are to be supplied by the contractor.Numbering is to be as per practice of the ECR and directives of the site Engineer.Main signal post, signal unit, surface base and coplete fitting as per ECRly practice. | — | — | — | 1,38,841.25 | |
| — | 124.00 | — | — | ||
| Painting of two coats of enamel paint over one coat of red oxide primer and there after numbering on the following items after scraping and cleaning of the surface where ever necessary .Primer and paints both Asian paint make or Similar ( Inspection Consignee) are to be supplied by the contractor.Numbering is to be as per practice of the ECR and directives of the site Engineer.Point machine with ground connections & JB complete (Point machine with black enamel only outside and ground connection with red oxide) | — | — | — | 46,110.64 | |
| — | 78.00 | — | — | ||
| Supply of Thermoshrink jointing kit for 2T joints-6 quad Inspection Consignee | — | — | — | 3,99,799.92 | |
| — | 78.00 | — | — | ||
| Installation of Thermoshrink jointing kit | — | — | — | 3,29,036.76 | |
| — | 14.00 | — | — | ||
| Excavation of trench in all kinds of soil and refilling of trenches (1.0 Mtr. Depth 300 mm width)- Without bricks. (I) Payment will be made as per actual work done on pro rata basis,if required depth is not available at site. (II) If the depth of trench is not uniform in a span of 100 mtr.or shorter length, if site condition demands along the cable run minium depth will be taken for that particular stretch for payment. | — | — | — | 9,96,695 | |
| — | 5500.00 | — | — | ||
| Transportation of material by 15 MT capacity truck. | — | — | — | 6,39,595 | |
| — | 26.00 | — | — | ||
| Loading , Unloading of heavy S&T material by 15MT truck | — | — | — | 2,70,271.56 | |
| — | 10.00 | — | — | ||
| Supply of Signal post Telephone with talk back facility consisting of 1 master +1 slave operation voltage 110v AC/12V DC. Inspection Consignee | — | — | — | 2,80,000 | |
| — | 60.00 | — | — | ||
| Supply of Battery Charger - Track Feed Up to 10 Amp, Spec. No.IRS:S-89/93 (Amd.-2) or Latest. Inspection RDSO | — | — | — | 5,34,646.2 | |
| — | 240.00 | — | — | ||
| Supply of FRP type TLJB (track lead junction box) fitted with 4-way ARA terminals with Angle iron of Size (1500 x 50 x 50) mm & 6mm thick to hold the junction box and for fixing cable entry pipe (40 x 500) mm. as per Spec. No.- RDSO/SPN/151/1997 or latest. TLJB- Inspection Consignee ARA- Inspection RDSO | — | — | — | 1,99,543.2 | |
| — | 300.00 | — | — | ||
| Supply of Condenser 4700 MF/ 50V Inspection Consignee | — | — | — | 41,616 | |
| — | 7000.00 | — | — | ||
| Supply of Disconnect type Terminal,screwless, 2 IN 2 OUT (as per spec. no. RDSO/SPN/189/2004 or latest) along with all accessories including separators for fixing on Cable Termination Rack/Location boxes for Cable Termination Purpose. Inspection RDSO | — | — | — | 7,40,810 | |
| — | 6000.00 | — | — | ||
| Fixing of Disconnect type Terminal (Wago or simillar) on relay rack/CTR/Location with steel carrier rack. | — | — | — | 8,640 | |
| — | 6.00 | — | — | ||
| Laying/drawing of OFC through HDPE pipe/PVC pipe for Km OFC by blowing as advised by site engineer. | — | — | — | 1,15,227.12 | |
| — | 24.00 | — | — | ||
| Supply and installation of Optical fibre cable joint enclosure and making straight through joints for 24 fibre cable and testing. This includes splicing and making pits of size 1.2M dia x 1.2 M depth with top cover slab as per drawing 3.Inspection RITES | — | — | — | 7,91,821.92 | |
| — | 6.00 | — | — | ||
| Supply & Laying of HDPE pipe with remaining materials in the trenches as per RDSO spec no. RDSO/SPN/TC 45/2013 Rev.2 Amndt No 2 or latest. It includes transportation of HDPE pipe from railway store to site & returning of left over material as per directions of engineer incharge/site engineer. Supply Inspection RITES | — | — | — | 6,83,488.8 | |
| — | 6.00 | — | — | ||
| Supply & Laying of HDPE pipe with remaining materials in the trenches as per RDSO spec no. RDSO/SPN/TC 45/2013 Rev.2 Amndt No 2 or latest. It includes transportation of HDPE pipe from railway store to site & returning of left over material as per directions of engineer incharge/site engineer. Execution | — | — | — | 70,559.4 | |
| — | 25.00 | — | — | ||
| Supply of cable termination box. Spec.no.IRS-TC-18-75 with locking arrangements and termination of derivation cable as per the technical supplements. -20 pairs Inspection Consignee | — | — | — | 85,475 | |
| — | 2450.00 | — | — | ||
| Exposing of cable in the vicinity of track by excavating soil & ballast and then relaying and back filling to it in original state at one particular place. | — | — | — | 9,64,320 | |
| — | 480.00 | — | — | ||
| Digging out of TLJB & its tail cable and back filling along with inserting it back. Also, determinating & its termination of wiring. This work is for one TLJB. | — | — | — | 2,37,120 | |
| — | 94.00 | — | — | ||
| Digging out of Point JB & its cable after opening of wiring from ARA terminals & its reconnection of conductor in point JB and reinsertion along with back filling of point JB to it in original state. This work is for one point JB. | — | — | — | 66,975 | |
| — | 650.00 | — | — | ||
| Supply of 8 SWG GI wire (4mm dia) suitable for trackcircuit rail bonding. As per IRS Specification S:13@ 45>46@. Inspection Consignee | — | — | — | 64,103 | |
| — | 1000.00 | — | — | ||
| Supply of 8 SWG soft drawn GI wire bond pieces (1320x4) nos. Resentance upto 19.5 OHM/MT To 1S-280 & IS-23 Inspection Consignee | — | — | — | 16,070 | |
| — | 49.00 | — | — | ||
| Supply of point JB fitted with 18 Nos. 1 way ARA PBT terminal block conforming to IRS - S- 75/91 with 3 Nos. of 40mm Bore. GI pipe 600 mm long as per DRG No.SGW/MGS/PT4/91 fixed on hard wood plank with U-channel (75 x 40 x 1500) mm for fixing. Point JB- Inspection Consignee ARA- Inspection RDSO | — | — | — | 2,26,380.98 | |
| — | 50.00 | — | — | ||
| Dismantling of existing point fitings and installation of already prepared and matched point fitting sets for point machine of IRS 24/90 type with final testing and commissioning from panel as per technical specification including transportation from railway store.-Turn out (Facing point layout) | — | — | — | 6,02,611.5 | |
| — | 50.00 | — | — | ||
| Supply of E-type lock without key,spec.no.IRS-S-30,Drg. no. S-3376/M key-S-3377/M. Individual number of miniature E locks and Normal size of locks required at site to be decided by the site engineer as per site requirement. Inspection Consignee | — | — | — | 80,456.5 | |
| — | 10.00 | — | — | ||
| Supply of Key for E Type lock supplied above Inspection Consignee | — | — | — | 2,416.2 | |
| — | 165.00 | — | — | ||
| Supply of Miniature lock. Inspection Consignee | — | — | — | 2,13,704.7 | |
| — | 40.00 | — | — | ||
| Supply of slotted angle (40 x 40x2 mm) Inspection Consignee | — | — | — | 11,600 | |
| — | 200.00 | — | — | ||
| Supply of Non deteriorating type low voltage cartridge fuse as per Spec. No. IRS/S/78/92. Round head type. - 4 Amp. Capacity. Inspection RDSO | — | — | — | 22,566 | |
| — | 350.00 | — | — | ||
| Supply of Non deteriorating type low voltage cartridge fuse as per Spec. No. IRS/S/78/92. Round head type. - 6 Amp. Capacity. Inspection RDSO | — | — | — | 39,490.5 | |
| — | 150.00 | — | — | ||
| Supply of Non deteriorating type low voltage cartridge fuse as per Spec. No. IRS/S/78/92. Round head type.-16 Amp. Capacity Inspection RDSO | — | — | — | 13,962 | |
| — | 4.00 | — | — | ||
| Supply of paper base hylum sheet 12 mm thick. Inspection Consignee | — | — | — | 38,914.04 | |
| — | 40.00 | — | — | ||
| Supply of PVC wire coil of size of colours as per instruction of site engineer in 100 mtr. Coils.Spec.no.IRS-S-76/89 material to be procured from RDSO approved firm only with performance guarantee.-16/0.2 mm Inspection RDSO (Unit-Coil) | — | — | — | 54,628.8 | |
| — | 450.00 | — | — | ||
| Excavation of trench less trench /manual boaring (size upto 110 MM) upto a depth of minimum 1.0 Meter along with dia HDPE/ DWC pipes and its accessories, all other items which will be required for laying of cable through HDPE/DWC pipes as per requirement at site. | — | — | — | 4,04,460 | |
| — | 140.00 | — | — | ||
| Providing and laying in position cement concrete of 1:3:6 (1 cement : 3 sand : 6 gradded stone aggregate 20 mm nominal size) including cement for laying of cable in Duct as per instruction of site engineer. Payment will be as per actual work in Cum. | — | — | — | 8,24,741.4 | |
| — | 320.00 | — | — | ||
| Filling earth around location box/signal post with sand or other for a width of 0.5 m on all sides, upto a level of 150 mm below the foundation top. This work includes consolidation of earth by watering. | — | — | — | 70,198.4 | |
| — | 150.00 | — | — | ||
| Switch Plate lubricant - Cenolube 100 or better NLGI 00 GRADE Black colored which should be non asphaltic Non bituminous blend of very heavy oils, inert thickeners and lubricating solids coupled with molybdenum disulfide and graphite with no traces of chlorinated solvent such as 1,1,1 trichloroethane which are flammable and harmful to the environment. Should have a blend of select high viscosity index solvent refined severely hydrofinished paraffin base oils and synthetic base fluids. It should incorporate solid lubricants & organo molybdenum disulphide to fill & lubricate micronized asperities to provide & form many films on the contact surfaces to prevent metal-to-metal contact. It shall be designed to be hand applied providing a tough adherent Lubricant film with Tacky semi-dry finish reducing contaminant adhesion. The grease Should Not form a difficult to remove thick DRY film which requires scrapping & solvent cleaning of Switch Plate specially before reapplication The grease should Not need Cleaning or scrapping before Reapplication. The Grease should be formulated for tropical climates and should not contain pour point depressants and should Not be too thin. The grease shall be Resistant to water wash off & dilution, water insoluble, non-melt and chemically resistant to exposed environment. The grease shall be formulated with Extreme Pressure additives, rust and corrosion inhibitors, anti-wear additives to protect external surfaces against the harsh elements in severe climates, thus reducing rust binding and adhesive wear on switch plates Four Ball Weld LOAD (ASTM- D2596) >600 Kg, Copper corrosion 24 hrs @ 100c (ASTM D 4048) 1a -2e packing Size 20 kg /25kg Drum.' Inspection RITES | — | — | — | 7,35,000 | |
| — | 20.00 | — | — | ||
| Fixing, wiring, testing & adjustment of electrical point machine TWS high thrust per standard practice. the item also includes (i) complete material for installation of point machine and fixing of ground connection/ switch extension P/D bracket insulator materials, S pipe, wiring materials, various nuts and bolts including casting NUTs and spring washer etc., adjusting the correct opening of switches and adjusting the point machine with crank handle. (ii) Wiring inside the point machine ,insertion and termination of tail cable in point machine and junction box/hut as per railways practice and instruction of site engineer . (iii) Supply & Fixing of GI pipes with flange for taking cable in to point machine and Jn. Box through gland/GI pipe. (iv)Complete material for insulation viz. point insulation material, GI Pipe/gland pipe, wiring material, nut & bolts of various sizes, MS channels 2 Nos. of length (350*125*50 mm) etc. as per site requirement for fixing the machine ,lugs for the point rodding and insulation material for the stretcher bar 90R/52kg/60kg as per RDSO Drg. no. SA-23171 (Adv.) Alt. 1,SA-23172 (Adv.) Alt. 1 will be supplied by the contractor (v) Smithy and fitting work required at site for complete installation, instalation of gauge tie plate and insulation of GTP as per Drg. No. NR/S&T/CON/7.6/97 and william stretcher bar (if required) will be done by the contractor .Also Machine will be overhauled by the contractor if required. (vi)This includes removal of existing gears and ixing the machine at raised level on channel as per standard practice to avoid flooding wherever required. (vii) Supply of electric point machine IRS 220mm stroke , ground connection, extension plate will be done by railways. Supply- Inspection Consignee | — | — | — | 2,63,797.2 | |
| — | 7300.00 | — | — | ||
| Transportation of HDT machine with accessories including handling of stores materials, preparation of site and boring for placing of 110 MM inner dia HDPE/DWC pipes for crossing of S&T cable together at Bridges/ Culverts/Track/ pucca road Crossing, Boring trench shall be minimum 3 Mtr below the river bed and 1 Mtr below the Track/Road /Pucca Road crossing area. This includes supply of HDPE/DWC pipes and accessories ( Inspection Consignee) cost of fuels & all other items which will be required for laying of cable through it. The work shall be executed as per instruction of site engineer.- (a) Boring upto length 150 Mtrs. Supply- Inspection Consignee | — | — | — | 96,19,429 | |
| — | 2.00 | — | — | ||
| Supply of heavy duty Rail drilling machine (Electric) with socket and accessories Make BDS RAIL MAB 915 or omilar Note-Compatible for installation of 220mm point mic for Thick Web Switch Supply- Inspection Consignee | — | — | — | 2,82,104 | |
| — | 2.00 | — | — | ||
| "Supply of Cable Fault locator as per specification attached. Make:Tempo/Stanlay Communication Model Sidekick Plus Kit Standard (1155-5001) or equivalent. Inspection- Visual RITES Inspection with OEM GC & TC " | — | — | — | 11,32,758.2 | |
| — | 2.00 | — | — | ||
| "Supply of Cable route locator/tracer set suitable for Detecting undergroundarmored optic fiber cable (OFC] and signaling cables with LCD Graphic. Display active/ passive modes and depth range. 3M-10M. 10M. Make- Stanly ST LOC 10GPS or equivalent. Inspection- Visual RITES Inspection with OEM GC & TC " | — | — | — | 7,52,096.44 | |
| — | 2.00 | — | — | ||
| Supply of Optical Time Domain Reflectometer (OTDR) as No per TECSpec No. TEC/GR/TX/OTD001/05/SEP-19 or latest. Make- Stanly/Yokogawa/Fuzikura/Sumimoto Supply- Inspection Consignee | — | — | — | 4,66,024.2 | |
| — | 2.00 | — | — | ||
| Supply of Auto single fiber fusion splicer machine with all No related accessories and power supply backup arrangement Make: Stanly Fuzikura or better Supply- Inspection RITES | — | — | — | 5,33,547.24 | |
| — | 60.00 | — | — | ||
| SUPPLY OF OPTICAL FIBRE CABLE SPLICE CLOSURE (24) Nos FIBRE) AS PER TEC SPECIFICATION NO G/OJC-02/01 MAR'99 WITH LATEST AMENDMENTS Supply- Inspection Consignee | — | — | — | 1,72,996.2 | |
| — | 50.00 | — | — | ||
| "SUPPLY OF PIG TAIL (10M LONG) WITH FC/PC CONNECTOR AS PER TEC SPECIFICATION NO G/OFJ-01/03 JUN 99 WITH LATEST AMENDMENTS Supply- Inspection Consignee " | — | — | — | 41,237 | |
| — | 50.00 | — | — | ||
| SUPPLY OF PATCH CORD (10M LONG) WITH FC/PC CONNECTOR ON BOTH SIDE AS PER TEC Spoc No. G/OFJ 01/03 JUN 99 WITH LATEST AMENDMENTS Supply- Inspection Consignee | — | — | — | 59,843.5 | |
| — | 400.00 | — | — | ||
| SUPPLY AND INSTALLATION OF RFID ELECTRONIC MARKER WITH CAPABILITY OF SAVING THE USER SPACIFIC DATA INSIDE THE MARKER MEMORY CHIP LATER READABLE BY LOCATOR DURING LOCATING 10 CM DIA WITH FLOATING COIL TO KEEP DETECTION OF CIRCUIT ALWAYS HORIZONTAL FOR BETTER DETECTION) WHICH CAN BE BURIED UP TO DEPTH OF 5 FT SIMILAR TO 3M MAKE MODEL-EMS-1421-XR/ADVOR SIMILAR Supply- Inspection RITES | — | — | — | 13,14,460 | |
| — | 5.00 | — | — | ||
| Supply of Optical Power Meter with visual fault locator Advanced Optical power meter calibrated wave 850/1300/1310/1490/1550/1625nm lengths, Normal OPM& Auto test OPM mode operation With Auto Wave ID feature, threshold detection feature withPass/Fail option, Measurementrange +10 to <70dBm. 0.01dBresolution, Built in VFL 10mW. DataStorage 1000 Traces, Data transfer through USB along with FC/PCConnector adaptor. (SC/PC Connector adaptor optional. AC/DCAdaptor optional) model-AOP110T-V10 or better. Supply- Inspection Consignee | — | — | — | 1,48,461 | |
| — | 10.00 | — | — | ||
| Supply of Electronic L.C. Gate Telephone system with voice recorder, as per RDSO Specification No. RDSO/SPN/TC/51/11. Rev.3.0 or latest- Master Telephone with inbuilt voice logger. Supply- Inspection RDSO | — | — | — | 4,26,429.9 | |
| — | 10.00 | — | — | ||
| Installation of Electronic L.C. Gate Telephone system with voice recorder, as per RDSO Specification No. RDSO/SPN/TC/51/11. Rev.3.0 or latest- Master Telephone with inbuilt voice logger. | — | — | — | 40,950 | |
| — | 25.00 | — | — | ||
| Supply of Electronic L.C. Gate Telephone system with voice recorder - Slave telephone as per RDSO Specification No.RDSO/SPN/TC/51/11. Rev.3.0 or latest, Slave Telephone Supply- Inspection RDSO | — | — | — | 1,49,843.5 | |
| — | 25.00 | — | — | ||
| Installation of Electronic L.C. Gate Telephone system with voice recorder-Slave telephone as per RDSO Specification No. RDSO/SPN/TC/51/11. Rev 3.0 or latest. Slave Telephone. | — | — | — | 13,387.5 | |
| — | 35.00 | — | — | ||
| Supply of power supply system 24V power pack with MF battery-7AH For LC Telephone, suitable for L.C. Gate Telephone with voice recorder as per RDSO Specification No. RDSO/SPN/TC/51/11. Rev.3.0 or latest Supply- Inspection RDSO | — | — | — | 2,68,809.45 | |
| — | 35.00 | — | — | ||
| Installation of power supply system 24V power pack with MF battery-7AH For LC Telephone, suitable for L.C. Gate Telephone with voice recorder as per RDSO Specification No. RDSO/SPN/TC/51/11. Rev.3.0 or latest | — | — | — | 23,152.5 | |
| — | 2.00 | — | — | ||
| supply of track bonding drilling machine electric operated suitable for 10 mm dia with horizontal stand, F-3C,115 V/220 VAC,RPM - 700 (no load) portable type, "Railwolf make"-Inspection-Consignee | — | — | — | 1,37,456.86 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
MasterTenderdocumentSig-2025-29.pdf
ATTACHMENT
LatestACSofGCCApril2022.pdf
ATTACHMENT
ECRJPOregardingprocedureforundertakingearthworkdiggingworktrenchingworkinthevivinityofsignallingtelecomandelectricalcables.pdf
ATTACHMENT
GCC_April-2022_2022__GCC-2022_POLICY_27.04.22.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .