15th Finance 2023-24 Construction of Cremation shed ,waiting shed Vasudevanallur Town Panchayat

Earth Work Excavation for foundation in all types of soils and sub soils to full depth (such as Soils in Rock / Silt / Light Black Cotton Soil / Ordinary Soil ) except in rock requiring blasting but inclusive of shoring, shuttering and bailing out water wherever necessary and refilling the sides of foundation with excavated earth other than sand in layers of 150 mm thick well rammed and consolidated, depositing the surplus earth in places shown by the Departmental Officers with initial lead of 10 m and initial lift of 2 m. Complete as per TNDSS 23 & 24, V, VI (S2), VII, 9,10

Plain Cement Concrete of mix 1 : 4 : 8 (One pat of Cement four part of sand eightpart of aggregates) using 40mm gauge hard broken including cost conveyance of all materials to site including formwork and centering labour charges, transporting and placing in position including shoring, strutting, forming protective bunds, cofferdams bailing out of water labour for mixing compacting, finishing and curing, working at depths, tools and plants and incidental charges such as sheeting, shoring and bracing and their subsequent removal etc., complete as per standard specification. TNDSS NO: 28 V, VI (S2) V,VI (S5A) VII

Supplying and errecting centering to sides and soffits including supports and strutting for drainage sides and culvert body wall sides using 90cm x 60cm and B.G 10 stifened with welded mild steel angles of size 25mm x 25mm x 3mm for boarding laid over( silver oak joists ) of size 10cm x 6.50cm spread at about 90cm including all labour charges and cost and conveyance of all materials to site etc. complete complying with standard specification. TNDSS NO: 30&86 Column Footing

Square column

Plain surface

Reinforced Cement concrete M20 grade1:1/2 :3 (one part of cement one and half part of sand and three part of aggregate )using 20mm gauge machine broken hard granite stone jelly for all RCC items of works excluding cost of TMT rod, centering , struuting but including cost of mixing placing the concrete in postion vibrating cosolidating finishing and curing the concrete etc complete complying the standard specifications. 30 V, VI (S5) VII & 13

Supplying ribbed tor steel rods including cutting cranking fabricating assembling laying in exact position tying with soft steel wire 16 or 18 BWG etc. complete for all RCC Works. as per the design given including cost of steel and binding wire also in all floors as per standard specification. Steel Calculations are as per TN PWD Buildings AEE/T3/195360/89 dated 30.07.1990

Brick work in CM 1:5 (one cement & five sand) using II class ground moulded bricks of size 9"X43/8"X 23/4" standard specification including finishing, curing,etc., complete complying with standard specification 30 V, VI (S5) VII & 13

Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three Sand) 10mm thick including hacking the surfaces, providing cement mortar nosing, beading for sunshades, staircases, steps, landing slabs and curing, etc., in all floors complying with standard specification and as directed by the departmental officers 56 & 57

Painting the new plastered walls with two coats of Exterior emulsion paint (weather proof ) first class quality and of approved colour over a priming coat including thorough scrapping clean removal of dirt etc. complete and including necessary plaster paris putty etc. wherever required.as per (ISI STD) (It mustprovide excellent resistance against the growth of algae and fungi on the walls. And it must offer excellent protection against alkali and UV degradation and the durability period should be 5 years. 61 V, VI (S4) 3.

Plastering with cement mortor 1:5 mix with 12mm thick including all charges etc..complete

Plastering with cement mortor 1:3 mix with 12mm thick including all charges etc..complete

Charges for conducting geophysical survey to locate favourite point for drilling etc…complete including all tools and plants including all labour charges etc…

Charges for drilling 41/2 inch dia deep vertical borewell in hard rock area in any required depth as decided by the departmental officers including inserting the easing pipe etc..complete as per standard specifications..

Supply and delivery of following OD PVC casing pipe (CM) including cost of all painting work and all labours etc…. 150mm plain casing pipe

150mm slotted casing pipe

200mm plain casing pipe

Supply and delivery of single phase submersible pump set as per IS 8034 with suitable panel board 20lpm x 70m indcluding all cost and conveyance of all materials to site and all labor charges etc complete as per standard specifications.

Labour charges for erection of 2.00HP submersible pumpset in the borewell including fixing and jointing of submersible cable with proper clamps up to starter to the required depth and also fixing of riser pipe to the required depth valves erection clamps pressur gauge up to the exterior wall of the pump room and erection of panel board consists of TPICN switch,ammeter voltmeter three pilot lamps capacitor single phasing preventer water level guard and laying and jointing of cable and TWIN earthing as per IE Rules etc complete and testing the pumpset and trair run for 10 days etc complete

Supply and delivery of 2.5 sqmm 3 core submersible cable etc..complete

Supply and delivery of Following PVC pipes and Specials from Borewell to HDPE tank laying below ground level and above Ground level and HDPE tank to Toilet . 32mm hdpe hose

25mm pvc pipe

50mm NRV - GM

25mm bend

25mm coupling

25mm gate valve

20mm GI wastenot tap

motor starter(L&T make)

Supply and delivery and fixing of HDPE tank as per IS 12701 / 1996 including loading, unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges etc. 1000 Ltr

Supplying and fixing of M.S grill of approved design for doors, windows and ventilators using necessary mild steel flats for inner and outer memebers which should be fixed to window frames inclusive of priming coat of best approved quality red oxide primer etc., complete complying with standard specifications.

Roofing with best Quality of Galvalume sheets 0.47 mm thick including cost of ‘U’or ‘J’ bolts bitumen washers and cutting all sheets to required size of if found necessary during execution etc. complete including cost and conveyance of all materials and all lobour charges etc.complete

BVLR TRADERS (BID ID -1148886)