Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹42.4 LAccepted-AOC | L1 | Accepted-AOC Successful bidder | |
| 2 | L2₹42.7 L+₹25,988.90 (0.61%)Rejected-Finance | L2 | Rejected-Finance Not lowest bidder |
Tender Value
Refer Docs
EMD Value
₹81,000
Closing Date
12 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF Sambra
GE AF Sambra ATS Sambra Belgaum 591124
PROVN OF MISC BR AND EM WORKS IN CERTAIN BILLETS FOR INDUCTION OF WOMEN TRAINEES AT ATS BELGAVI
2022_MES_563001_1
8736/E8
Open Tender
Civil Works
Item Rate
180 days
GE AF Sambra
Please refer Tender documents
8 documents required · 8 mandatory
₹500
GE AF sambra
₹81,000
Yes
7 Feb 2023
14 Nov 2022
14 Dec 2022
14 Nov 2022
12 Dec 2022
29 Nov 2022
Amount
M & L Anodised aluminium powder coated frame for doors, windows, ventilators and partition with one or more rebates including jointing cleat for fixing etc. complete all as specified and directed.
M & L Prelaminated particle board 12mm thick, interior grade, prelaminated both sides with decorative choice laminations fixed with screws to timber frame work as in shelves of cupboards and kitchen cabinets etc complete all as specified and as directed,
Demolition of cement concrete (un-reinforced) in ground floor and pavings not exceeding 15cm thick below or above ground level all as specified and directed.
M & L Plain cement concrete 1:2:4 type B0 using 12.5 mm graded stone aggregate as in 25 mm thick sub-floors, sub-bases, floors and pavings, etc. complete all as specified and as directed.
M & L Machine cut kota stone slab flooring, 20 to 25mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing with bees wax polish over and including 20mm screed bed in cement mortar 1:4 all as specified and directed.
S & F Stainless steel curtain rod 25 mm dia 1.25mm thick wall complete all as specified and directed
S & F Stainless steel brackets suitable for curtain rod 25mm dia rod including decorative stops /rollers fixed at ends of pipes fixed on wall/ aluminium frame complete all as specified and as directed.
S & F Unplasticised PVC pipe 20mm bore of pressure rating 10 kgf/cm2 including fitting such as bends,elbows, tees etc fixed to walls, ceilings or in floors complete all as specified and directed.
S & F Bib cock with nozzle 15mm dia fancy type, chromium plated, cast copper alloy, screwed boths ends for pipe or for unions, suitable for fixing to washing machine complete all as specified and as directed.
S & F Brass cromium plated wardrobe hooks 50mm to 60mm fixed on walls /plates/aluminium frame complete all as specified
Excavation in post holes in hard/dense soil or similar holes each not exceeding. 0.5 cum gettting out, returning filling in and ramming earth or broken rubble mixed with earth in layers not exc 25 cm thick complete all as specified & as directed.
M & L Plain cement concrete 1:3:6 type C2 using 40mm graded stone aggregates as in foundation filling and mass concrete complete all as specified & directed .
M & L Plain cement concrete 1:2:4 type B2 using 40mm graded stone aggregates as in foundation filling and mass concrete complete all as specified & as directed .
M & L Mild steel angle, flat as in posts and struts in fencing including cutting to shape as directed, drilling holes, notching for wire etc, flat iron fillets for secruing wire mesh etc including all necessary drilling, bolting or riveting etc conforming to Fe -290-GdeE-165 complete all as specified & as directed.
S&F Mild steel round bars 10 mm and over as in tie rod cut to length bend to shape as required for interwoven with chain link fencing complete all as specified & as directed.
S & F Mild steel screw bolts 5 to10 mm dia (machine made ) with hexqagonal or square heads at one end & screwed the other or screwed both ends ,each screwed end to be fitted with washers & one hexagonal or square nut length of bolt exc 5 cm & not exc 10 cm long complete all as specified & directed.
Supply only mild steel, galvanised, PVC coated chain link fencing, thickness of PVC coating not less than 1.5mm etc complete all as specified and directed.
Fixing only chain link fencing including line wires any mesh size & type to any type of standards rails,straining boltsetc including provision of line wire complete all as directed.
M & L Preparation of new steel surfaces of any description over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
M & L Preparation of new steel surfaces of any description not exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified & as directed.
Excavation in trenches not exceeding 1.50m wide and not exceeding 1.5 m in depth; and getting out in hard/dense soil complete all as specified
M & L for PCC 1:4:8 type D-2 using 40mm graded stone aggregate in foundations complete all as specified & directed
M & L RCC 1:2:4 type B1 using 20mm graded stone aggregate as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete all as specified & directed
M & L Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter rough finished flat surfaces of concrete all as specified & directed
M & L R C C 1:2:4 type B1 using 20mm graded stone aggregate as in columnsColumns, pillars, piers, posts and struts etc complete all as specified & directed
M & L Form work to sides of columns, pillars etc with rough finished flat surfaces complete all as specified & directed
M & L TMT bars as in reinforcement 10mm dia and over cut to lengths, bent to shape required including cranking, bending etc and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified & directed
M & L for TMT bars 5mm and over upto and including 10mm dia as in stirrups, spacers and binders complete all as specified & directed
M & L cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in copings or similar work including necessary formwork,weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed
M & L Granite 20mm thick tiles (of any type) machine cut, in skirting/ dado and jointed with grey cement slurry, and pointed with white cement with admixture of pigment match the shade of granite stone including griding and polishing over and including 10mm thick backing coat in cement mortar 1:4 complete all as specified and directed
S & F framed work as in doors or gates of angles or other section with gusset plats, rails, braces, etc, complete, drilled for fixing of steel sheeting or other covering, doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering running, rails and guiedes) and hanging; also fastening and fixing, Fe-290 Gde-E-165 complete all as specified and directed
S & F Collapsible steel gates, top hung, consisting of channel pickets pivoted flat bars top and bottom runners, brass handle etc., as specified erected in position and securing runners with holdfasts and brackets, complete all as specified and as directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers n exc 25 cm in soils complete all as specified and directed
Removing surplus excavated soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed
Material and Labour Point wiring with PVC unsheathed multi stranded 1.5 Sqmm FRLS copper cable drawn through in and including PVC casing capping 20/25 mm width complete with all accessories including MS sheet metal box 1.2mm thick switch board or PVC rectangular switch board of suitable size fixed on wall including PVC unsheathed multi stranded 1.5 Sqmm FRLS copper Cable as earth continuity connected with common earth dolly complete all as specified & directed for following :-
One light/fan point controlled by one one way switch 5 Amp complete
One 3 pin switch cocket outlet 5 Amps independent
S & F Switch piano flush type, single pole one way 6 Amp 240 Volts all as specified and directed
S & F Ceiling rose surface backelite three terminal 240 volts complete all as specified and directed
S & F switch socket outlet 2/3 pin 5 Amps flush type (Gang Box type) complete all as specified and directed
S & F switch socket combination multipurpose 2 in 1, 3 pin 5 /15 Amps, universal type controlled by one switch flush type (Gang Box type) complete all as specified and directed
S & F LED Tube light fitting comlete with Single LED glass tube 20 watt with batten with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size all as specified and directed.
M & L Sub main wiring two single core PVC insulated copper conductor cable 2.5 sq mm, 1100Volts grade, drawn through and including suitable size of non-metallic PVC rigid conduit and conduit accessories or casing and capping fixed up walls, roofs or floors including one run of 2.5 sqmm PVC insulated cable as earth continuity conductor and connecting up complete all as specified and directed. Note:- 3 runs 2.5 sqmm cabe and one run of PVC conduit / casing & capping will be measured as one unit length.
M & L Sub main wiring two single core PVC insulated copper conductor cable 6 sq mm, 1100Volts grade, drawn through and including suitable size of non-metallic PVC rigid conduit and conduit accessories or casing and capping fixed up walls, roofs or floors including one run of 6 sqmm PVC insulated cable as earth continuity conductor and connecting up complete all as specified and directed. Note:- 3 runs 6 sqmm cabe and one run of PVC conduit / casing & capping will be measured as one unit length.
S & F sheet metal enclosure factory made double door, Vertical, TPN DB 8 Way, IP 43 protection suitable for fixing 4 Pole MCCB 63 Amps main incoming complete all as specified and as directed. Note : MCCB 63 Amps four pole will be measured and paid seperately under relevant items.
S & F Distribution board SPN 4 Way, double door, 240 volts, 200 Amps rated bus bar factory made etc complete all as specified and as directed.
S & F sheet metal enclosure, factory made double door, D B SPN 8 Way ,240 volts with 200 Amps rated bus bar complete all as specified and directed.
S & F MCCB four pole, 63 Amps, 415 volts, 16 KA, 50 Hz AC, fixed thermal magnetic complete all as specified and directed.
S & F MCB Triple Pole, 16-32 Amps , 415 volts, C Curve, 50 Hz AC supply complete all as specified & directed.
S & F MCB, SPN, 6 to 32 Amps, 240 volts, C Curve, 50 Hz AC supply complete all as specified & directed.
S & F MCB, SP, 06 to 32 Amps, 240 volts, C Curve, 50 Hz AC supply complete all as specified & directed.
Supply and Fix Electrical Sanitary Napkin Incinerator, automatic, wall mounted type, 15-20 pads per cycle and 200 pads per day, 1.2mm thick CRCA sheet external housing and insulated type internal housing, size 270mmx250mmx600mm, thermal ceramic sheet with 5mm thick glass wool insulation, 2.5mtr length power cable, 2mtr flue gas pipe clamp type, disposes napkins environment friendly method by burning the pads and converting it into ash, testing, technical specification specified below & as directed.
Tech Specification : (i) Voltage - 220 Volts,6 Amp Max, 1250 Wattage,Auto Cut Off power saver, Emission outlet, Less than 1 gm per total burning of napkin residue Ash, Temp cut off-present with LED display, Equipment ON indicator, Coating - Inside SS covering for maximum life time, Outside epoxy powder coating, auto start, thermal ceramic insulated door design size 140x120mm, Ceramic heater 1200watt, settable temperature indicator, MCB 6 Amp safety. (II) Emission standards - Complete burning of napkins only less than 1 g ash per napkin is generated. The exhaust gas meets the Municipal solid waste management rules 2016/CPCB guidelines. (iii) Ash collection tray - Tray is easily openable and disposable.
Supply, laying and testing Low Tension cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables, heavy duty, 1100 Volts grade with stranded aluminium conductor of size 35 sq mm 3.5 core complete all as specified and as directed
S & F DWC HDPE Pipe IS-16205, size inner dia 63 mm, outer dia 75 mm for cable protection in wall/under gorund laying of UG cables including SNAP-FIT Coupler and all fittings as required complete all as specified and as directed
Cutting the tar macadam road / hard standings for laying cable and excavating not exceeding 0.45m wide and 0.6m in depth and getting out including re- filing back and finishing it with 200mm thick PCC 1:4:8 type D-2 complete all as specified & directed.
M & L Galvanised Iron pipes, light grade 50mm with all fitting and fixed complete to poles/route/drains etc and ceillings or laid in floors all as specified & directed.
M & L LT Cable route indicator with a welded/riveted disc of 4 inch dia and engraved with cable with cable route marker made out of angle iron 40 x 40 x4 mm thick dug in ground with in and including PCC 1:3:6 type C1 using 20mm graded aggregate at approx distance 100 mtr including necessary earth work complete all as specified and directed
M & L Earthing and testing complete with galvanized iron earth plate electrode 60 cm x 60 cm x 6mm thick buried directly in ground vertically to a depth not less than 2.25 m below normal ground level with top edge of earth plate at a depth not less than 1.5m below normal ground level connected to and including G I strip 32x6 mm as earth lead by means of bolts and nuts, check nuts and washers etc made of GI & connected to equipment and earthing test point, earth dolly all as shown in elect plate No 3 of SSR Pt-I including all necessary earth work, excavation PCC chamber, cover with handle (RCC 1:2:4) and 20mm dia GI watering pipe and 40 mm dia light grade GI for protection of earth strip, wire mesh, funnel, charcoal dust & common salt, etc all as specified and directed and testing on completion.
S & F MCCB four pole 63 Amps 415 volts, 16 KA, adjustable type,50 Hz AC along with and including suitable size, totally enclosed self supporting structure / cubicle, weather proof, vermin proof outdoor type, protection IP 54, suitable for outdoor use, with bottom cable entry with suitable cable glands, structure with angle iron 30x30x5mm frame covered with 3.15mm thick M S sheet, four legs grouted to PCC (1:2:4) type B1 foundation block with sinle hinged door at front with suitable locking arrangement, structure treated under 7 - tank metal treatment process and duly powder coated all as specified and directed.
M/S ADITYA CONSTRUCTIONS
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .