REPAIR REPLACEMENT OF UNSERVICEABLE CHAIN LINK AND BARBERED FENCING, CONCERTINA COIL, MS GATES, MS DRAIN/ SEWAGE COVER, GRATINGS AT RS COLABA AND RASHI AREA UNDER AGE B/R -II (NW) NAVY NAGAR

Dismantling of fencing posts or struts (wood, steel or R.C.C.) any section embedded in conrete, brick work, masonry etc, including taking out embedded portion and making post work clear for bedding of new postsdisturbed ground all as specified .

Dismantling of fencing wire mesh, barbed wire fencing, any type all as specified and directed

M&L for PCC 1:4:8 type B2 using 40mm gragded stone aggregate for post hole complete all as specified and directed.

M&L MS Angle iron post or struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc flat iron fillets (for securing wire mest etc) including all necessary drilling bolting or riverting etch and similar work confirming to /fe 290 Gde E-165 complete all as specified and as directed

Supply only chain link MS galvanised fencing of any size square mesh of any dia wire directed by Engr-In Charge.

Fixing only chain link MS galvanised fencing any size or type as required complete all as specified and directed.

S & F MS 10 mm dia round bar and fixed independently to angle iron for chain link fencing cut to length, bend to shape reqd and directed including taking down old rusted part complete all as specified and directed.

Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5 cm of 11 to 15mm dia of neck.

S&F repair galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails strain-ing bolts, including, tying at crossing with and provision of galvanised mild steel wire, staple oe steel pins etc as directed by EIC (each line wire to be measured)

S&F in repair barbed razor type concertina coil 9 SWG hot galvanised spring tensile wire of UTS 145 to 150 Newton per square mm zinc coating 250-300 grams per squre metre dia of coil when unstretched 610 mm covering 8 to 10 running meter per coil and minimum weight of coild (GI strip) 1.625 kg per running metre hot dip galvanised razor ribbon tape of size 0.50 mm thickness, 19 mm wide before wrapping on central core wire fixed 1.66 mm thick GI clip minimum 25 nos per running metre and special nut bolt to hold two coils together and extra two rows parallel wire of 10 gauge ,including dismantling of concertina coil any type complete all as specified and as directed