Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance DADRA AND NAGER HAVELI DN | DADRA AND NAGAR HAVELI | THE DADRA AND NAGAR HAVELI AND DAMAN AND DIU | 396193 | Admitted-Finance |
| 3 | Admitted-Finance | Admitted-Finance |
Tender Value
₹16.4 L
EMD Value
₹32,806
Closing Date
4 Oct 2023, 2:00 pmClosed
The Exe.,Engg., PWD, WD-I, Daman.
The Multi Office Complex, PWD, 2nd Floor, Near Moti Daman Market, Moti Daman.
Repair and renovation of District Court Building, Fort Area, Moti Daman. (E-30261)
2023_DAMAN_3110_1
Tender Notice No.84/01/2023-24
Open Tender
Civil Works
Works
90 days
Daman District.
Please refer Tender documents.
2 documents required · 2 mandatory
₹500
The Exe.,Engg., PWD, WD-I, Daman.
₹32,806
7 Oct 2023
30 Sept 2023
4 Oct 2023
30 Sept 2023
4 Oct 2023
30 Sept 2023
Amount
Civil work
Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials and disposing off the excavated stuff upto 50 Meter lead.(C) Hard Murrum.
Providing and filling rubbles including hand packing and filling interstices with quarry spalls behind abutments and between returns as directed.
Providing and laying cement concrete 1:3:6 (1-Cement : 3- coarse sand : 6- hand broken stone aggregates 40 mmnominal size) and curing complete excluding cost of formwork in (A) Foundation and Plinth
Providing and laying controlled cement concrete M.250 and curing complete including the cost of formwork and exluding reinforcement for reinforced concrete work in Foundations, footings, Base of columns and Mass concrete as per direction of the as directed.
Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending, binding and placing in position complete upto floor two level
Steel work, riveted in built up sections framed work including cutting, hoisting, fixing in position and applying a priming coat of red lead paint. (D) In trussses and trussed purlins, upto 25 M. span and 15 M ovarall height.
Providing and fixing pre-cast Rubber Dye / steel Dye inter locking concrete block 60mm thick with grade of concrete M300 pnumatic compressed / vibrated mechanically and as per approved design Confirming to IS 15658 : 2006 including 35 mm Sand layer for levelling and filling the joint with sand in proper line and level as per guidlines of IRC : SP 63-2018 etc. Complete.
Providing corrugated G.S. sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.5 mm thick with zinc coating not less than 275 gm/ m2.
Dismentaling tiled of stone floors laid in mortar including stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift.
P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on existing flooring by adhesive material including dismentaling of existing flooring and jointed with color cement slurry including finised with flush pointing & cleaning the surface etc. complete for light shade
Construction of cooking kitchen platform (60-75) mm wide and 700 mm ht. resting on Kota stone / BB Masonary walls 23 cm thick in cm 1:6 with fixing black granite slab complete.
Providing and fixing 600mm x 450mm bevelled edge mirrror of superior glass mounted on 6mm thick A.C. sheet or plywood sheet and fixing to wooden pluge with C.P. brass screws and washers.
Providing and fixing single layer water proof gypsum board 12.5 mm thick sections using water proof board of size 1220 mm x 1830 mm x 8.0 mm suspended by GI suspender channel of size 25 mm x 3 mm with intermediate channel og size 18 mm x 40 mm x 0.8 mm at 1220 mm center to center ceiling section of size 40 mm x 35 mm x 0.55 mm at 457 mm c/c and perimeter channel A of size 20 mm x 27 mm x 30 mm x 0.5 mm at edges & drops incl.paper tap sand sofit cleat, anchor fastener, scoch bolt connecting cleat,joining compound top coat on ceiling incl.making necy.opening for light fitting,diffuser etc. comp. as per detail drawing as directed.
Providing and fixing 18 mm thick granite (Telephonic black or its equivalent) gang saw cut,mirror polished, premoulded and prepolished,machine cut for kitchen platforms,vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.
Providing and laying polished kota stone slab 25mm thick in risers of steps,skirting Dedo and pillars laid on 10mm thick cement mortar 1:3 (1-Cement : 3 coarse sand) and jointed with gray cement slury mixed with pigment to match the shade of slab including rubbing and polishing etc. complete.
Demolition of Brick Work and stone Masonry including stacking of servieable matrials and disposal of unservieable materials with all lead and lift.(i) in Lime Mortar.
Providing wood work in frames of Doors, windows cleare story windows and othersimilar works wrought, framede and fixed in position. (A) Indian Teak Wood
Providing and fixing 35 mm thick shutters for Doors, windows and clerestory windows including Indian teak wood frames 10 cm x 7 cm. size including anodized alluminium fixtures and fastenings including primer coat of approved quality and two coats of oil painting etc, complete. (ii) Fully Panelled.
Brick work using common burnt clay building bricks having crushing strength not less than 35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:6 (1- Cement : 6 -fine sand)(B) Conventional
20mm thick sand faced cement plaster on walls upto height 10 metres above ground level consisting of 12mm thick backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1-sand) etc. complete.
Providing & fixing alluminium anodised/powder coated door shutter of required medium alluminium section with internal joint rod fixed with nuts,partly glazed with 5 mm thick clear glass & hardner sheet of 5 mm, required fixtures like handle, hinges, locking arrangements etc complete as directed.
Providing Piling work for Door frame with 12-18 mm thick plywood up to 30cm width fixed with adhesive and required screw, nails etc. complete at corner joints. Finished by grinding etc. complete as directed by engineer incharege.
Providing polishing work to existing wooden, vineer surface including preparing base surfce by filling required wood filler,with top coat of french polish two coats with spray machine etc. complete as directed incharge.
Painting two coats (excluding priming coat) on new steel and other metal surface with synthetic enamel paint, brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matter.
Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture on undecorated wall surface to give an even shade including throughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth.
Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) to give an required shape even shade after thoroughly brushing the surface to remove all dirt, and remains of loose powdered materials.etc complete.
Applying two coats of putty & two coats of primer of approved brand and manufacture on new wall surface to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth.
Providing & Fixing Bath Room Accessories set like Napkin Ring, Towel Rod , Brush Holder , Soap Disc etc. As directed by Engineer - in -charge.
Providing and fixing alluminium anodized window shutter having handles vitrified system and interlock section size 38 mm x 18 mm x 1.50 mm with stainless steel Jalli for mosquito rubber gasket, locking arrangement and soling etc. complete.
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : 610x510 mm bowl depth 200 mm.
providing & fxing floor spring with weight capacity of 120kgs fixed to floor by dismentling existing tile/wooden floor, with base cover and top cover plate, screw etc complete as directed.
Providing & fixing 1.5 mm thick PVC matt finished carpet of wonderfloor vinyl carpet including cleaning of existing surface, fixd with adhesive all completeetc. As directed.
NAUSHAD M HASNANI
Dharmik Construction
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .