Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹40.4 LAccepted-AOC | L1 | Accepted-AOC LOWEST REASONABLE BID | |
| 2 | L2₹46.0 L+₹4.9 L (11.8%)Rejected-Finance 9 SHUBHASH BHAWAN RAJENDAR MARG MOUNT ABU 307 501 | MOUNT ABU | SIROHI | RAJASTHAN | 307501 | L2 | Rejected-Finance NOT LOWEST |
Tender Value
₹44 L
EMD Value
₹88,000
Closing Date
17 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE (Army) Jodhpur
CWE (ARMY) JODHPUR, MULTAN LINE, ARMY AREA, JODHPUR, PIN-342010
ADDITION ALTERATION OF BUILDING NO CMH-71 AT MILITARY STATION MT ABU UNDER AGE (I) UDAIPUR
2022_MES_558539_1
82223/53/E8
Open Tender
Civil Works
Item Rate
180 days
MOUNT ABU
As per Tender Documents
8 documents required · 8 mandatory
₹500
AGE (I) UDAIPUR
₹88,000
Yes
2 Feb 2023
18 Oct 2022
21 Nov 2022
18 Oct 2022
17 Nov 2022
3 Nov 2022
19 Oct 2022 - 2 Nov 2022
Amount
Dismantling of Manglore pattern or similar tiles in roofing complete all as specified and as directed.
M&L for Manglore pattern tiles in roofing interlocking at side joints, laid dry. complete all as specified and as directed.
M&L for refixing old Manglore pattern tiles in roofing interlocking at side joints, laid dry complete all as specified and as directed.
Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering. complete all as specified and as directed.
M&L for prepainted, 0.50mm thick galvalume aluminium zinc AZ-150 coating, GI based corrugated steel coloured sheet in tile profile pattern having tensile strength of 550Mpa as in roof covering & on chajjas fixed with self tapping screws at alternate corrugation etc. complete all as specified and as directed.
M&L for prepainted, 0.50mm thick galvalume aluminium zinc AZ-150 coating, GI based plain steel coloured sheet having tensile strength of 550Mpa as in roof serrated ridge fixed with self tapping screws etc., complete all as specified and as directed.
S&F fibre glass reinforced translucent plain sheeting 3mm thick with two side lap, fixed with L-type or J-type or cranked hook bolts and washer in roof etc., complete all as specified and as directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.
M&L for rolled mild steel sections in rafters, purlins and posts or hollow square pipe as in tiles battens/purlins, nut bolts etc., where connected to common rafters and running rails fixed with angle cleats or other connecting plates and nut, bolts etc., confirming to Fe-290 (Gde E-165) complete all as specified and as directed.
M&L for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete drilled for fixing of steel sheeting or other covering, doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe-290 (Gde E165) complete all as specified and as directed.
M&L for Plain galvanised mild steel sheeting, 1mm thick, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and as directed.
Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone-work and precast concrete articles complete all as specified and as directed.
M&L for brick work in cement mortar 1:6 using old size kiln burnt bricks of sub class 'B' having compressive strength not less than 35 Kg/Sqcm, straight or curved on plan exceeding 6 mtr mean radius complete all as specified and as directed.
Taking down cement plaster on brick/stone walls etc., including raking out joint, hacking for key scrubbing down with water etc., complete all as specified and as directed.
M&L for rendering 15mm thick in cement mortar 1:6 on wall surfaces finished even & smooth without using extra cement complete all as specified and as directed.
M&L for rendering 15 mm thick in cement mortar 1:4 mixed with liquid water proofing compound as per manufacturers' instructions, on external surfaces of walls & top surfaces of chajja/roof/ceiling and finished even and smooth without using extra cement complete all as specified and as directed. Note:- WPC shall be measured and paid separately under relevent item
Demolition of unreinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness complete all as specified and as directed.
Demolition of reinforced cement concrete (reinforcement shall be cut as required to facilitate demolition) complete all as specified and as directed.
M&L for RCC 1:2:4, type B0, using 12.50mm graded stone aggregate as in chajjas, lintels, roof ceiling, drops etc., complete all as specified and as directed.
M&L for RCC 1:2:4, type B1, using 20mm graded stone aggregate as in slab supported on wall, decks slab etc. complete all as specified and as directed.
M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.
Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and as directed.
Formwork to chullah hoods, chajjas, troughs and similar items flat, including edges complete all as specified and as directed.
M&L for PCC 1:3:6, type C1, using 20mm graded stone aggregate as in foundation, surface channel, cills, copings, bed plate, plinth courses, roof kerbs or mud stops rounded or chamfered on edges complete all as specified and as directed.
M&L for 25mm thick PCC 1:2:4, type B0, using 12.50mm graded stone aggregate as in floors surface finished even & fair without using extra cement complete all as specified and as directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding etc (but not backing) and removing rubbish off the premises complete all as specified and directed.
M&L for light coloured, Non Skid ceramic, joint less tiles of size 400x400x7 to 8mm thick each set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick cement mortar 1:6 screed bed or bedding layer as in floors etc., complete all as specified and as directed.
M&L for light coloured vitrified digital double charge tiles size 600x600x8-9 mm thick in floors etc. Set and jointed with Balendura adhesive or equivalent as approved by Engr-in-charge and pointed in white or coloured cement to match over and including 15 mm thick screed bed or bedding layer with CM 1:6 complete all as specified and as directed.
M&L for coloured glazed ceramic tiles 600x300x7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match over and including10mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete surfaces as backing on vertical surfaces such as dados and risers to steps etc., complete all as specified and as directed.
Demolition of stone slabs and tiles of any description or thickness laid, bedded and pointed in in any mortar as in floors, aprons etc. complete all as specified and as directed.
M&L for 18-22mm thick machine cut prepolished Kota stone slab laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing over and including 20 mm thick screed bed or bedding layer in cement mortar 1:6 as in flooring complete all as specified and as directed.
M&L for 18-22mm thick machine prepolished Kota stone slab laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing over and including 10mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete surfaces as backing as in vertical surfaces like riser of steps, skirting, dado and pillars etc., complete all as specified and as directed.
M&L for 18-22mm thick Granite slabs, south black (Jet/Telephonic black), table rubbed and polished over and including 15mm thick screed bed or bedding layer in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite as in steps, jambs, pillars, window-cills, cooking platforms and like complete all as specified and as directed.
Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness, including cover fillets complete all as specified and as directed.
M&L for Gl frame work for seamless ceiling comprising of Gl perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm center to center, intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx. 900mm center to center with Gl cleat and steel expansion fasteners with and including ceiling section (not exceeding 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm center to center complete all as specified and as directed.
M&L for 6mm dia G.I. Hangers (up to 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and as directed.
M&L for 12mm thick Gypsum Board in ceiling/suspended ceiling in plain/designer/decorative shape horizontal or vertical fixed with screw as per manufacturers instructions complete all as specified and as directed.
M&L for POP decorative cornice moulding exceeding 10cm but not exceeding 20cm in width or girth fixing between junction of wall and ceiling at certain locations including two coats distempering complete all as specified and as directed.
M&L for POP decorative Round False Ceiling Cornice in 450 to 600 mm dia in allround ceiling fan/chandelier including two coats of distempering complete all as specified and as directed.
M&L for preparation of ceiling board surface and applying two coat of oil bound distemper over a coat of primer including a coat of wall care putty complete all as specified and as directed.
M&L for suspended false ceiling system using powder coated (E-grid) exposed suspended system, grid size 600mm x 600mm compressing of GI powder coated Main Runner of dimensions 39mm x 24mm x 0.8mm thick (Thickness comprising of GI/0.4mm+ PPPCGS/0.3mm & weight of runner 1.35kg for 3600mm length), Cross Tee of dimensions 29mm x 24mm x 0.8mm thick (Thickness comprising of GI/0.4mm + PPPCGS/0.3mm & weight of Tee 0.195 kg for 600mm length) and Wall angle of dimensions 22.2mm x 22.2mm x 0.65mm thick (Thickness comprising of GI / 0.35mm + PPPCGS/0.3mm & weight of angle 0.70 kg for 3050mm length) with and including 4mm thick HPSC (High pressure steam cured) pre primed, self embossed, textured designer board to be placed in the grid system duly suspended with 4mm dia GI bar hangers fixed with steel dash through fasteners from purlins with butterfly clips (wt-0.007 kg/clip), hold down clips (wt-0.0035 kg/clip), with provn of light fixture etc., complete all as specified and as directed.
Taking down Chowkats or frames not exceeding 1.5 Sqm each (Without taking off shutters from the frame) and removing to store complete all as specified and as directed.
Taking down Chowkats or frames exceeding 1.5 Sqm and not exceeding 4 Sqm each (Without taking off shutters from the frame) and removing to store complete all as specified and as directed.
Taking down Chowkats or frames exceeding 1.5 Sqm and not exceeding 4 Sqm each (Without taking off shutters from the frame) and removing to store complete all as specified and as directed.
M&L IInd class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned a joints complete. Complete all as specified and as directed.
M&L for 35mm thick factory made ASCU vacuum pressure treated kiln seasoned IInd class hard wood plain framed panel shutter (two panels or more) with lock rails and panel of 9mm thick B.W.P. commercial ply or 12mm veneered particle board with commercial veering on both faces. The size of rail and style as per I.S.1003(Part-I) 2001 complete all as specified and directed.
M&L for solid PVC frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet & edges will be printed to match with prelam sheet reinforced with MS square tube etc., complete all as specified and as directed.
M&L for Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and as directed.
M&L for Cabinet Shutters made out from high density PVC solid fibre board of 18mm thick, duly laminate with 2mm thick prelam PVC sheet on front face cut to length of size & shape complete all as specified and as directed.
S&F Self closing casement type hinges 90/180 degree fixed at site complete all as specified and as directed.
S&F in repair 18''/20'' self closing drawer sliding channel, metal, under mount, full extension for kitchen cupboards complete all as specified and as directed.
S&F in repair magnetic ball catches with 8mm dia steel ball brass body and striking plate including letting in and fixed, overall length of cover plate 140mm long complete all as specified and as directed.
Taking down existing aluminium door shutter with frame of area exceeding 1.0Sqm and refixing in same opening after repair/replacement of defective parts (any type of aluminium section) complete all as specified and as directed. Note: Aluminium parts will be measured and paid separately.
S&F in repair 100mm mortice Lock (4leaver) with all fittings for aluminium door complete all as specified and as directed.
S&F 150mm long aluminium handles, cast type, anodised complete all as specified and as directed.
S&F Aluminium anodised or powder coated door, window, ventilator, cabin partitions frames with one or more rebates and shutter frames for sliding or casement windows as required including jointing cleat, glazing clips with EDP gasket for fixing, rubber packing etc. complete all as specified and directed by Engr-in-charge.
S&F 5.50 mm thick sheet glass in square exceeding 0.5 Sqm in each pane, ordinary quality plain or tinted and glazing with rubber gasket complete all as specified and directed.
S&F 10 mm thick sheet glass in square exceeding 0.5 sqm in each pane, ordinary quality plain or tinted and glazing with rubber gasket complete all as specified and directed.
S&F 12 mm thick prelaminated particle board exterior grade both side decorative choice laminations fixed in aluminium frame work complete all as specified and directed.
S&F 100 mm long aluminium alloy type C-22 butt hinges with galvanised mild steel hinge pin etc., complete all as specified and directed.
S&F 100mm long butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.
S&F 300 mm long Aluminium sliding door bolts, bolt type, bolt 16 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed.
S&F 200mm long aluminium anodised barrel tower bolt with 12 mm dia bolt complete all as specified and directed.
S&F 150 mm long aluminium anodised barrel tower bolt with 12 mm dia bolt complete all as specified and directed.
S&F 150mm long aluminium anodised handle, cast type complete all as specified and directed.
S&F 100mm long aluminium anodised handle, cast type complete all as specified and directed.
S&F Stainless steel wire cloth with 0.36mm nominal dia of wire and average width of aperture 1.40mm, fixed with tinned tacks or galvanised wire staples complete all as specified and directed.
S&F in repair Stainless steel wire cloth with 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed with tinned tacks or galvanised wire staples complete all as specified and directed.
Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames, glazed with putty or fixed with beads complete .all as specified and directed.
S&F 3mm thick sheet glass in a square not exceeding 0.5 Sqm in each pane, plain or tinted ordinary quality and glazing with oil putty complete all as specified and directed.
S&F in repairs stainless steel type curtain rod 22 to 25mm dia as per sample complete all as specified and directed.
S&F in repairs purpose made brackets trade pattern for stainless steel decorative type curtain rods suitable for holding 22 to 25mm dia as per sample complete all as specified and directed.
S&F in repairs stainless steel decorative fincals (round type with mirror optic finish) trade pattern for decorative type curtain rods suitable for 22 to 25mm dia curtain rods as per sample complete all as specified and directed.
S&F in repairs 15mm bore GI tubes, medium grade with all fitting and fixed complete to walls and ceilings or laid in floors concealed or open of any length/short length including taking down or up old tubes complete all as specified and directed.
S&F in repairs 20mm bore GI tubes, medium grade with all fitting and fixed complete to walls and ceilings or laid in floors concealed or open of any length/short length including taking down or up old tubes complete all as specified and directed.
S&F in repairs 20mm dia gun metal gate valves, with iron wheel head, screwed both ends for iron pipe flange ends type and weight not less than 1.50 Kg complete all as specified and directed.
S&F in repairs 15mm bore bib cock with wall flange, cast copper alloy, CP, with crutch or butterfly handles screwed down for iron pipes or for brass ferrule complete all as specified and directed.
S&F in repairs 15mm bore angular stop cock with wall flange, cast copper alloy CP, fancy type, screwed down high pressure screwed for iron pipe or for union complete all as specified and directed.
S&F in repairs soap dish, recessed type, stainless steel, fixed complete all as specified and directed.
S&F in repairs overhead shower 80mm dia Round Shape Single Flow (ABS Body Chrome Plated With Gray Face Plate) with Rubit Cleaning System complete all as specified and directed.
S&F toilet paper holder of brass chromium plated fixed to walls with chromium plated (CP) brass screws etc. complete all as specified and directed.
S&F towel ring square with round flange fixed complete all as specified and directed.
S&F in repair CP jet spray with flexible tube etc complete all as specified and directed.
S&F in repair angle valve two way with wall flange, 15mm dia chromium plated, cast copper alloy, complete all as specified and directed.
S&F in repair, CP wall mixture 3 in1 with and including provision for overhead shower with 115 mm long bend pipe on upper side and hand shower, connecting legs and wall flanges etc., complete all as specified and directed
S&F in repair single piece wash down water closet pan (EWC) (pedestal pattern) of size 360mm x 600mm x 755mm, 'S' trap 220mm, with PP normal close slim seat cover, hinges, cistern fittings and other accessories, white including connection to out going pipe etc., complete all as specified and directed.
S&F in repair Wash hand basin, table top of size 485mm x 370mm x 150mm, including 32 mm size cp brass waste fittings, PVC waste pipe 32 mm flexible type but excluding taps complete all as specified and directed
S&F for health faucet (hand shower), 8mm dia, 1.2m long flexible tube and wall hook with N.R.V (back flow preventer) complete all as specified and directed.
S&F in repair Corner glass shelf size 200 mm radius with bracket and glass complete all as specified and directed.
S&F in repair Glass shelf size 500 X 125 mm radius with bracket and glass complete all as specified and directed.
S&F basin mixture, single lever, with 450 mm long braided hoses complete all as specified and directed.
S&F towel shelf, 600mm long with lower hangers, stainless steel fixed complete all as specified and directed.
M&L for high durability stainless steel glass railing stain/polished grade 304, height between 900 mm to 1100 mm size of railing 50 mm dia, 40 mm x 40 mm baluster and 20 mm x 20 mm supporting pipe etc including glass clamps etc. complete all as specified and directed.
S&F 12 mm thick frosted toughened glass in rectangular shape area exceeding 0.8sqm to 1.5sqm including etching, area 30cm x 30cm etc., complete all as specified and directed.
S&F in repair 450mm long PVC connections, 15mm bore with PTMT nuts complete all as specified and directed.
S&F in repair 100 mm/ 125mm dia mild steel chromium plated grating fixed on floor trap / nahni trap in Cement mortar 1:6 complete all as specified and directed.
Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified and directed.
S&F 100mm bore Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, or in floor or fixed to walls complete all as specified and directed.
S&F 110mm dia PVC (SWR) pipe with fittings single socketed in any length with rubber ring joints laid in tranches or in floor or fixed to walls with clamps etc., complete all as specified and directed.
S&F 75 mm dia PVC (SWR) pipes with fittings single socketed in any length with rubber ring joints laid in tranches or in floor or fixed to walls size with stack clamps etc., complete all as specified and directed.
S&F PVC (SWR) multi floor trap 75 mm dia with grating including jointing to waste pipe fixed in cement concrete 1:2:4, type B1 using 20mm graded stone aggregate complete all as specified and directed.
Removing building materials to a distance of 100m or under, beyond the lead included in the respective rates, including loading, unloading and stacking at the destination complete all as specified and directed.
Supply only liquid water proofing compound ISI marked complete all as specified and directed.
Complete removal of existing surface including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots of walls. complete all as specified and directed.
M&L for complete removal of existing treatment of external or internal walls and applying 1 mm thick weather coat wall care white putty in two layers, white wall care putty on complete all as specified and directed.
M&L for preparation of new or old putty surface of walls or ceiling and applying two coat of anti fungal plastic emulsion paint over and including a coat of primer complete all as specified and directed.
M&L for preparation of old surfaces of ceiling and applying two coats of white wash complete all as specified and directed.
M&L for preparation of old plastered surface/old decorated surfaces of wall and applying two coats of weather coat exterior emulsion paint complete all as specified and directed.
M&L for preparation of new steel iron surfaces of any description over 10cm in width or girth not otherwise described and applying two coat of synthetic enamel paint over and including one coat of red oxide primer complete all as specified and directed.
Removing old paints by paint removes or burning off by blow lamps and cleaning with scrapers, any number of coats, any width or girth complete all as specified and directed.
M&L for preparation of old/new wooden surfaces of any description not otherwise described over 10cm in width or girth and applying two coat of synthetic enamel paint over and including one coat of pink primer complete all as specified and directed.
M&L for preparation of old steel surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L for two coat of exterior emulsion roof tile paint coloured on roof tiles and fascia of roof over one coat primer complete. All as specified and directed.
M&L for carrying out water proofing treatment for roofs in the following stages and as directed by Engr-in-Charge:-
(i) 10mm thick plaster in CM 1:4 mixed with WPC will be applied over the roof slab. After the plaster is cured the roof will be tested for water tightness by ponding with water for seven days for any seepage/leakages etc. If any seepage is observed the rectification will be carried out by pressure grouting under the pressure of 5 Kg/Sqcm using cement based cement grout. After the surface is repaired the slab will be tested for water tightness again before proceeding with further treatment.
(ii) The surface of roof, parapet and gutters, drain mouths, etc. over which waterproofing treatment is to be applied shall be cleaned of all foreign matter such as fungus, moss, dust etc by wire brushing and dusting. For cast iron drain out lets a grove shall be cut around to tuck in the treatment. Concrete angle-fillets shall be provided at junctions between roofs and vertical faces of walls (parapet and other walls), around obstacles such as pipes, chimneystacks, etc and other similar situation to ease up about comers.
(iii) Bituminous based primer conforming to IS : 3384-1965 @ 0.3 Kg/Sqm to be applied on prepared surface, till the surface is properly impregnated.
(iv) One coat of hot blown bitumen of grade 85/25 @ 1.2kg /sqm shall be applied over primed surfaces.
(v) After the application of approved bituminous primer the APP modified polymeric membrane of thickness 3 mm & weight not less than 3.50 Kg/Sqm shall be laid & sealed on the primed surface by torch application as per manufacture instructions. The overlap while torching shall be 100mm in longitudinal direction and 100mm in transverse direction. All overlap joints shall be made as a monolithic layer.
(vi) All joints and changes in direction should be curved with cement mortar 1:3 mixed with SBR latex @ 200 ml per bag of cement and cured well before laying the membrane.
(vii) A fillet of PCC 1:2:4 of 100 x 100 mm shall be provided at all junctions of vertical and horizontal surfaces and wherever there is a change of direction. The membrane should not be taken over at any steep turns and hence all corners/junctions should be rounded. Applying two coats of silver shield paint (Aluminium bituminous based) over APP membrane 0.1 Kg/Sqm per coat in 12 hrs interval as per manufacturer's instructions complete.
Taking down carefully aluminum/copper point wiring (light/fan/socket/power) complete including fittings such as switch, socket, ceiling roses light fittings etc and making good disturbed surface of wall (Serviceable light fitting to be kept separately for reuse).complete. All as specified and directed.
M&L for point wiring 1.5 sqmm nominal area PVC insulated and unsheathed multistranded copper conductor FRLS in PVC concealed conduit with suitable metal box and hylem sheets with multistranded insulated solid copper earth continuity conductor of size 1.5 sqmm complete. All as specified and directed.
(a) One light point controlled by one switch one way
(b) One fan/exhaust fan point controlled by one switch one way
(c) One socket out let 5 Amps 5 pin on independent board
(d) One socket out let 5 Amps 5 Pin on same board with other switch
(e) One call bell point controlled by one bell push .
All as per item No 2 here in before but with cable size 2.5 Sqmm for one 5 pin 15 Amps socket out let on independent board and multistanded insulated solid copper earth continuity conductor of size 2.5 Sqmm all as specified and directed by Engr-in-Charge.
M&L for Electric bell Multi music type, 230 Volts, single phase complete all as specified and directed by Engr-in-Charge.
M&L for Modular Bell push, 6A, 1 module complete all as specified and directed by Engr-in-Charge.
S&F Modular switch, 1 way, 6A, 1 module complete all as specified and directed by Engr-in-Charge.
S&F Modular socket, 6A, 2/3 pin combined, 2 module complete all as specified and directed by Engr-in-Charge.
S&F Modular switch socket outlet, 3 pin, 6A, flush type complete all as specified and directed by Engr-in-Charge.
S&F Modular switch socket combination, 16A, 6 pin, 3 module complete all as specified and directed by Engr-in-Charge.
S&F Ceiling rose on PVC board of size 65 X 50mm, three terminal complete all as specified and directed by Engr-in-Charge.
S&F Modular white over plate with frame, 1 module complete all as specified and directed by Engr-in-Charge.
S&F Modular white over plate with frame, 3 module complete all as specified and directed by Engr-in-Charge.
S&F Modular white over plate with frame, 4 module complete all as specified and directed by Engr-in-Charge.
S&F Modular white over plate with frame, 6 module complete all as specified and directed by Engr-in-Charge.
S&F Modular metal flush box, 1/2 module complete all as specified and directed by Engr-in-Charge.
S&F Modular metal flush box, 3 module complete all as specified and directed by Engr-in-Charge.
S&F Modular metal flush box, 4 module complete all as specified and directed by Engr-in-Charge.
S&F Modular metal flush box, 6 module complete all as specified and directed by Engr-in-Charge.
S&F Angle holder complete all as specified and directed by Engr-in-Charge.
S&F Modular fan regulator electronic step type, 120W, 2 module complete all as specified and directed by Engr-in-Charge.
S&F MCB single pole, Curve 'C', 240 volts, 5 to 32 Amps complete all as specified and directed by Engr-in-Charge.
S&F MCB single pole and neutral, Curve 'C', 240 volts, 32 Amps complete all as specified and directed by Engr-in-Charge.
S&F MCB triple pole and neutral, Curve 'C,' 415 volts, 40 to 100 Amps complete all as specified and directed by Engr-in-Charge.
S&F MCCB, 4 pole, 415 volt adjustable type, 200 amps with breaking capacity 36 KA complete all as specified and directed by Engr-in-Charge.
S&F MCB DB, SPN, 8 way, (double door) with 200 Amps rated bas bar, neutral link, earth bar and Din rail double door complete all as specified and directed by Engr-in-Charge.
S&F MCB DB, TPN, 4 way (double door) with 200 Amps rated bas bar, neutral link, earth bar and Din rail complete all as specified and directed by Engr-in-Charge.
S&F sheet metal enclosure with socket plug top and MCB, 20Amp, 240v complete all as specified and directed by Engr-in-Charge.
S&F LED lights fitting 1x18 Watt, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Engr-in-charge.
S&F LED lights fitting mirror type with high out put diffuser 2 feet, 10 watt 220V, AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Engr-in-charge.
S&F LED decorative ceiling light fitting 2x2 panel light 24 watt complete all as specified.
S&F decorative wall lamp fitting (up to 14 watt LED bulb to be used) complete all as specified and directed by Engr-in-charge.
Taking down old unserviceable exhaust fan and S&F exhaust fan made of sturdy engineering plastic complete with louver shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete all as specified and directed by Engr-in-Charge.
M&L for sub main wiring with 2x4 Sqmm copper conductor (Multistandered FRLS) 1x2.5 sqmm copper conductor wire as earth continuity in PVC conduit complete all as specified and directed by Engr-in-Charge. Note:- 2 runs of 4 sqmm wire, 1 run of 2.5sqmm wire and 1 run of PVC conduit will be measured as 1 RM.
M&L for Earthing complete with GI steel earth plate electrode 60 cm X 60 cm X 6.3mm thick barried directly in ground vertically to a depth not less than 2.25 metres below ground level with top edge of earth plate at a depth not less than 1.5 metres below level ground, connected to Gl iron or steel earth wire 4 mm dia (8 SWG) by means of nuts, bolts checks nuts and washers made of Gl iron or steel earth wire protected by Gl iron pipe 15 mm bore, medium grade and connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6:) type C1, pre-cast RCC cover slab 30 cm X30 cm X 10 cm with one lifting handle made of 8 mm dia ms bar funnel wire mesh,20mm bore GI or steel pipe medium grade for watering, charcoal or coke and salt in alternate larges, necessary excavation and earth work in any type of soil complete all as shown in electrical plate No 3 of MES schedule part-I and testing after completion all as specified and directed by Engr-in-Charge
Haritwal traders
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .