Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.9 LAccepted-AOC | L1 | Accepted-AOC AOC | |
| 2 | L2₹6.8 L+₹1.3 L (24.5%)Rejected-Finance | L2 | Rejected-Finance Other than lowest tenderer | |
| 3 | L3₹9.4 L+₹3.9 L (70.9%)Rejected-Finance | L3 | Rejected-Finance Other than lowest tenderer |
Tender Value
₹9.8 L
EMD Value
₹19,600
Closing Date
2 Dec 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
HQ CWE Rajouri
HQ CWE Rajouri PIN 900129 C/o 56 APO
REPAIR/MAINTENANCE OF EXTERNAL HT ELECTRIFICATION INCL TRANSFORMERS, GOD SWITCHES, HT CABLES AND HT OVER HEAD LINES WITH CONNECTED WORKS AT HQ CIF (R) AND SIGNAL REGT UNDER AGE (I) CIF (R)
2023_MES_625934_1
CWE/PAL-40/2023-24
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
AGE (I) CIF (R)
Class E and category b(ii)
9 documents required · 9 mandatory
₹500
AGE (I) CIF (R)
₹19,600
Yes
12 Jan 2024
31 Oct 2023
7 Dec 2023
31 Oct 2023
2 Dec 2023
14 Nov 2023
Amount
Supply & erecting in repair steel tubular pole swaged poles 11 mtr long complete with cast iron base plate, finial taper plug, bolts nuts & screws as specified type 410 SP-55 complete all as specified and directed .
Supply and fix in repair anti climbing devices, comprising 2.24mm dia galvanised steel 2-strand barbed wire with 2.00mm dia barbs wrapped spirally round poles, to a length of 0.5 to 1.0 metre clamped and properly secured or as ordered complete all as specified and directed. Note :- Clamps will be measured separately.
M&L for cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers welding bending cold or hot drilling holes for bolts in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint including dismentling complete all as specified and directed by Engr-in-Charge.
S&F in repair danger notice plate of 1.6 mm thick mild steel sheet, vitreous enamelled white, with letters, figures and conventional skull and bones in signal red colour and fixed with M.S Clamps, bolts and nuts of approved size for LT 20x15 cm size all as specified and directed.
S&F in repair danger notice plate of 1.6 mm thick mild steel sheet, vitreous enamelled white, with letters, figures and conventional skull and bones in signal red colour and fixed with M.S Clamps, bolts and nuts of approved size for HT 25x20 cm size all as specified and directed.
M&L for stay assembly 16 mm dia of stay rod complete with all accessories as shown in electrical plate No 1 fixed in repair complete all as specified and directed. Note : loop type insulator, stay clamps excavation and concrete measured separately
M&L for loop type insulator Large size, with overall dimensions90mmx140mm, clearance of hole 25.5mm suitable for stay assembly fixed in repair complete all as specified and directed.
S&F in repair lightning arrestor HT 11 KV 10 KA Station class expulsion type complete with all fittings, transmission class, discharge capacity 65 Kilo Amp complete all as specified & directed.
Supply and install HT 11 KV outdoor gang operated air break switch suitable for horizontal or vertical mounting with drop out fuse having 12 insulators of rating upto 200 Amps incl taking down old complete all as specified and directed by Engr-in-charge. Note : All the connected tripping/fuse system shall be sleeved with coded colour as RYB.
M&L for earthing in replacement complet with galvanised steel earth plate eletrode 60cm x 60cm and 6 mm thick buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 meters below normal ground level, connecting to the Galvanised iron earth lead 32mmx6mm size, by means of bolts, nuts, check buts and washers of galvanised iron and 32mmx6mm earth lead protected by provision of GI medium grade pipe 40mm bore including provision of aggregates with 40mm thick cover of RCC (1;2:4) reinfored with XPM (weight not less than 4 Kg/Sqm) and frame of angle iron 25mmx25mmx6mm with lugs 02 Nos and with 6mm dia MS bar handle made to shae, GI light grade 20mm bore pipe for watering perforated at bottom 1.75 metre long placed on top edge of earth plate, common salt and charcoal filling, and fixed withexisting test point and fixing arrangment, funnel, wire mesh and earth work in hard/dense soil, returning filling in distance not exceeding 50 mtr and removal of surlus soil to plate No 3 of SSR-2009 Part-I and connecting to earth test point all as specified or indicated including testing on completion complete all as specified and directed.
Excvation in trenches n.exc 1.5 mtr wide and n.exc 1.5 m in depth for foundation and getting out in any type of soil complete all as specified & directed.
Excvation in trenches exc 1.5 mtr wide and exc 1.5 m in depth for foundation and getting out in any type of soil complete all as specified all as specified and directed.
M&L for removing excavated material to a distance n.exc 50 m & depositing where directed at a level n.exc 1.5 m above the starting point.
Returning, filling in including spreading, leveling, watering and well ramming in layers n. exc25 cm in any type of soil.
M&L for dry sand cushioning to under ground cable intrenches incl spreading, leveling and hand punning complete all specified & directed. Note : For measurement purpose punned thickness shall be considered.
Supply & laying un-reinforced precast concrete cable cover, class HV type I, flat, size 300mm x 180 mm x 40mm over the HT cable for protection of cable complete all as specified & directed.
M&L for Brick covering with equal to length of brick as mechanical protection to cable with well burnt sub class 'B' bricks laid for LT UG cable as directed .
M&L for PCC (1:3:6) type C1 using 20 mm graded stone aggregate for foundation of pole around pole all as specified and as directed by Engineer-in-Charge.
M&L for PCC (1:4:8) type D2 using 40 mm graded stone aggregate for base foundation of pole all as specified and as directed by Engineer-in-Charge.
M&L for PCC (1:2:4) type B1 using 20 mm graded stone aggregate for coping of pole around pole and filling in road cuts/ hard standing/ Bitumen all as specified and as directed by Engineer-in-Charge.
M&L for two coats of synthetic enamel paint over a coat of Red oxide primer including primer including preparation of old steel/iron surface of any description over 10 cm in width or girth complete all as specified & directed
Pruning of tree branches and making clear LT/HT line to the min distance of 1.8 mtrs all around for 2/3/4/5/6 conductor.(Note: The Nos of conductors/wires between two poles will be treated as one span).
Supply, laying & testing cable XLPE insulated, screened PVC bedded galvanised steel strip armoured HT electric power cable (heavy duty) 11000 volts grade with aluminum conductor 6.35 KV (UE)/11 KV (E) grade, cross sectional area 95 Sqmm, 3 core as per IS-7098 suitable for earth system laid in trenches complete all as specified and direcetd by the Engr-in-Charge. Note:- Earth work including excavation, returning filling in, removing, sand coushioning, brick covering for mechanical protection of cable etc will be measured and paid for separately under respective items of schedule.
M&L for cable termination 11 KV HT (Heat shrinkable) cable jointing kit in replacement for 11 KV grade cable for end joint outdoor type heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 120 sq mm to 185 sqmm complete all as specified directed.
M&L for Cable jointing kit for 11 KV (Earthed) grade cable in replacement for straight through heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 120 sq mm to 185 sqmm.
M&L in replacement of 1.1 KV LT (Heat shrinkable) cable jointing kit in replacement for 1.1 KV grade cable for straight through heat shrink type joint complete with jointing material and accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size up to 50 sq mm to 95 sqmm.
Taking down old and UNSV transformer at different locations in the area of responsibility falls under AGE(I) CIF (R ) from two pole strcture/ foundation including disconnecting the LT/HT connection and shifting to workshop and getting back after repair and refixing the same at original location and connecting electrically and commissioning complete all as specified and directed at site the capacity transformer 200 - 315 KVA complete all as directed.
Replacement of burnt defective HT/LT copper coil of different type capacity winding with superior M & Fin quality enamelled copper winding wire/strips of of suitable size/guage and Nos of turns maching with the existing impendence and insulated including all allied materials such as cork sheets, fibre glass insulation/paper insulation cotton, empire tape and wooden, bolts, nuts and washer (Brass) soldering and other packing material etc required for entire winding of coils all as specified and directed by Engineer- in-Charge.
M&L for replacement of HT bushing porcelain, vitreous with brass spindle, threaded with washers nuts, lock nut and rubber seal suitable for transformer of any make /type/capacity in repairs all as specified and directed by Engineer-in-Charge
M&L for replacement of LT bushing porcelain, vitreous with brass spindle, threaded with washers nuts, lock nut and rubber seal suitable for transformer of any make /type/capacity in repairs all as specified and directed by Engineer-in-Charge
M&L in replacement of Top gasket sheet made out of 4 mm thick cork sheet with suitable GI bolts, nuts, washers for top of transformer any capacity complete all as specified and directed
M&L in replacement of Dehydrating breather assembly CI body of standard size filled with silica-gel for transformer of capacity upto and including 200 KVA complete all as specified and directed
S&F in repair temperature gauge circular dia type of standard size for transformer of capacity upto and including 250 KVA complete all as specified and directed
Material and labour for filling in with new transformer oil for topping up having low viscosity of approved make as per IS 355 of 1992 and di-electric strength not less than 45 KV(after filtration) complete all as specified and directed by Engineer-in-Charge. Make : Savita/Castrol
Dehydration and filtration of transformer oil with proper dehydration machine to achieve dielectric strength between 45 to 60 KV including testing/recording of dielectric strength result before and after dehydration complete all as specified and as directed.
Taking down from main substation and M&L for painting to Transformer of capacity 300 KVA to 400 KVA and automatic servo voltage stabilizer 100 KVA to 300 KVA with spray gun with two coats of synthetic enamel heat resistant grey paint over a coat of red oxide primer including preparation of old painted surfaces/removing old faded/rust/ cemented material of surface of transformer including base frame, connected LT panels, duct covers including writing MES/SM No of existing size/surface complete all as directed.
S&F in repair Earth continuity conductor passing through PVC Conduit of size 40 mm main earthing lead fixed to wall on batten or recess or chases or burried in ground or drawn in conduit/pipe or any other indicated situation for loop earthing etc as required 32x6 mm galvanised iron strip complete all as specified and directed by Engr-in-Charge.
Supply and fixing in repair Ring type Copper thimble of size 120 sqmm for terminal end of HT cable suitable for 11KV high Voltage carrying high quality material complete all as specified and directed.
Suply only Electrical insulation HT tape of 3/4"width of 30 feet length Etylene Propylene backing highly comfortable to wrap snugly over any shape, Stretches up 100 percent, should be moisture resistant & insulative, complete all as specified.
M&L CRC 2-23 Electrical equipment (contact) cleaner spray used to prevent electronic malfunction equipment caused by water penetration, humidity, corrosion etc in a can of 500ml. complete all as specified and directed.
Supply & Fixing in replacement of Pin type insulators polymer type off white or green insulator including one galvanised mild steel spindle, two galvanised iron washers and one galvanised iron nut, 150mm height, 150mm dia for 11000 volts grade complete all as specified.
M&L in replacment of Aluminium over head conductor steel reinforced, all sizes Weasel type, complete all as specified & directed.
S&F in repair Disc type insulator, porcelain, vitreous 145mm high and 255mm dia ball and socket type, white, brown or green Two-in-series' assembly for tension with tension clamps for conductors, working pressure 11000 volts complete all as specified & directed.
M & L for pole painting HT 11.0 mtr long with a coat of aluminium paint after preparation of old painting surface by scrapping including marking of black and red strip not less than 30 cm width with sythethic enamelled paint from coping to height upto 1.5 mtr of pole alternative way including necessary `MES & Pole number to be wriiten in the circular yellow batch on the pole all as specified and directed.
M & L for Galvanised stay wire stranded 7/3.25 mm including stay clamp and fixing arragement in repair complete all as specified and directed.
M/S PARSHOTAM KUMAR GUPTA
darshan kumar gandhi
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .