Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.3 LAccepted-AOC | L1 | Accepted-AOC being lowest tender reasonable | |
| 2 | L2₹31.7 L+₹2.4 L (8.09%)Rejected-Finance ROWRIAH CHARIALI JORHAT ASSAM PIN 785004 | JORHAT | JORHAT | ASSAM | 785004 | L2 | Rejected-Finance being not lowest | |
| 3 | L3₹34.1 L+₹4.7 L (16.0%)Rejected-Finance | L3 | Rejected-Finance being not lowest | |
| 4 | L4₹35.2 L+₹5.8 L (19.8%)Rejected-Finance | L4 | Rejected-Finance being not lowest | |
| 5 | L5₹36.0 L+₹6.6 L (22.5%)Rejected-Finance | L5 | Rejected-Finance being not lowest |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
22 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GARRISON ENGINEER
GARRISON ENGINEER JORHAT, MES, JORHAT-785005
WELCOME MAINT TO CERTAIN MD OFFICER ACCN AT LICHUBARI UNDER GE JORHAT.
2023_MES_598962_1
8128/E8
Open Tender
Civil Works
Item Rate
270 days
Jorhat
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
GARRISON ENGINEER JORHAT
₹60,000
Yes
1 Jul 2023
27 May 2023
24 Jun 2023
27 May 2023
22 Jun 2023
10 Jun 2023
27 May 2023 - 31 May 2023
Amount
NOTES :The bidders/contractors are advised to read tender document & all corrigendum/ amendments and General conditions of contracts before entry/quoting the rates.
Dismantling old and decayed timber scantlings, framed work, 40 sq. cm and over in section, in any position complete all as specified and directed.
Supply and Fix, second-class hard wood timber scantlings, clean sawn, in unframed works and in any position, fixed with nails etc complete all as specified and as directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles, debris etc and rubbish off the premises complete all as specified and as directed.
Demolition of cement concrete (un reinforced) in ground floors and paving n. exc. 15 cm thickness (below or above ground level) complete all as specified and as directed.
Material and labour for Plain Cement Concrete M-7.5(Nominal Mix) using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.
Material and labour for 75 mm thick Plain Cement Concrete M-7.5(Nominal Mix) using 40 mm graded stone aggregate as in sub base, finished even and fair without using extra cement complete all as specified and as directed.
Material and labour for 50 mm thick Plain Cement Concrete M-15(Nominal Mix) using 40 mm graded stone aggregate as in floor , finished even and smooth etc complete all as specified and as directed.
Material and labour for 75 mm thick Plain Cement Concrete M-10(Nominal Mix) using 40 mm graded stone aggregate as in plinth protection including finishing surface even and smooth without using extra cement , complete all as specified and as directed.
Material & Labour Non skid ceramic tiles, coloured, 7 to 8 mm thick (square/rectangular area of each tile exceeding 0.06 Sqm and not exceeding 0.11 Sqm , in floors etc. Set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed layer in CM (1:4) including roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc and brushign neat cement slurry with 3.0 kg of cement per Sqm complete all as specified and as directed.
Material & Labour Glazed ceramic tiles 450x300/ 300x200 x7 mm(Coloured) on vertical surfaces such as skirting, dados and riser to steps etc. set and jointed in neat cement slurry and pointed in coloured cement to match complete over 10mm thick screed bed/ vertical layer in CM (1:4)all as specified and as directed.
Material & Labour of vitrified ceramic tiles, coloured shade, 10 mm thick of square/rectangular area of each tile not exceeding 0.36 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match over 15mm thick screed bed layer in CM (1:4)complete all as specified and as directed.
All as per item No 12 here-in-before but to vertical surfaces such as skirting over and including 10mm thick rendering in CM (1:3) complete
Material & Labour of 18mm thick granite ( of any type) work (table rubbed and polished in steps, jambs, pillars, cooking platform etc and like set in cement mortar (1:4) including pointing in white cement (1:2) using marble dust admixture of pigment to match with shade of granite over 15mm thick screed bed layer in CM (1:4) including taking down existing one complete all as specified and as directed.
Materials and Labour for, Pre-polished chemically treated chequered cement concrete tiles with grey cement and pigment,20cm x 20cm x 25mm thick,set, jointed and pointed in neat cement slurry in floors over and including 20 mm thick screed bed or bedding layer of cement mortar (1:4), complete all as specified and directed.
Material , Labour and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed..
Material and labour for post contructional antitermite for treatment of soil under existing floors using emulsion @ one litre per hole, 300 mm apart including drilling and plugging 12 mm dia holes with cement mortar 1:2 to match the existing floors complete all as specified and directed.
Material and labour for providing and injecting chemical emulsion for post contructional antitermite along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and directed.
Material and labour for providing and injecting chemical emulsion for post contructional at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing complete all as specified and directed.
Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.
Taking down cement plaster from brick or concrete surfaces of any description including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.
Material and labour for Brick work with bricks class designation 75, old size, straight or curved on plan exceeding 6 m mean radius built in Cement Mortar 1:6 complete all as specified and as directed.
Material and labour for brick work with bricks class designation 75, size as per old size brick, straight or curved on plan exceeding 6 m mean radius half brick thick walls built in Cement Mortar 1:4 complete all as specified and as directed.
Material and labour for 25 mm thick Providing precast cement concrete louvres and jalies, in cement concrete 1:2:4 type B-0, using 12.5 mm graded stone aggregate and set in cement sand mortar 1:4 including all moulding etc complete all as specified and as directed.
Material and labour for Rendering 15 mm thick, cement plaster, in cement sand mortar (1:6) on fair face of brickwork and finishing surface even and smooth without using extra cement, complete all as specified and directed.
Material and labour for Rendering 5 mm thick, cement plaster, in cement sand mortar (1:3) on ceiling and finishing surface even and smooth without using extra cement, complete all as specified and directed.
Material and labour for Rendering 5 mm thick, cement plaster, in cement sand mortar (1:4) mixed with water proofing compound @ 3% by the weight of cement used or as per manufactures instructions over and including 10mm thick backing coat in cement mortar (1:4) on fair faces of brick work or concrete surface in walls, complete all as specified and directed. Note: - (Water proofing compound shall be measured and paid separately)
Taking down chowkhats or frame with shutters (without taking off shutters from the frame) of area n. exc. 1.50 Sqm Eachand removing from site etc , complete all as specified and as directed.
Taking down chowkhats or frame with shutters (without taking off shutters from the frame) of area exc. 1.50 Sqm Eachbut n.exc. 4.0 Sqm and removing from site etc , complete all as specified and as directed.
Taking down shutters from frame or chowkat of any description of area n.exc. 1.00 Sqm Eachand removing from site etc , complete all as specified and as directed.
Taking down shutters from frame or chowkat of any description of area exc. 1.00 Sqm Eachbut n.exc 2.0 Sqm and removing from site etc , complete all as specified and as directed.
Material and labour for 2nd class hardwood chowkats and frames Plain, solid, straight, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete as specified and directed.
Material and labour for 30 mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides complete etc complete all as specified and as directed.
Material and labour for 2nd class Factory made hardwood Glazed and skeleton shutters 35 mm thick, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkat complete all as specified and directed
Material and labour for 2nd class Factory made hardwood Glazed and skeleton shutters 30 mm thick, open rebated and prepared to receive glass, gauze, etc. (with sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkat complete all as specified and directed
Material and labour for 18/19 mm thick Medium Density Fibre board (MDF) exterior grade ISI marked (IS:12406-2003) timber frame work as lining , panelling similar location cupboard shutter, shelf and kitchen cabinet etc complete all as specified & as directed
Materials and labour for mild steel of grade• Fe-290 Gde-E-165 as in bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles complete all as specified and as directed.
Supply and fixingg of powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixingg hinges/ pivots and making provision for fixingg of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixingg with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge.
Supply and fixing of of aluminium grill powder coating (minimum thickness of powder coating 50 micron) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixingg and operation of handles and fixingg approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in- charge.
Supply and fixing of in repair double action floor spring, hydraulically regulated, made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed
Supply and fixing of in repair Brass mortice lock for aluminium door , vertical type, 4 Levers and 100mm size complete all as specified and directed
Supply and fixing of steel window with side hung shutters incl. projecting / box type hinges with steel handles steel peg stay , holdfast and guard bars etc complete with glazing bar 10 cm devetailed or welded including shop coat red oxide primer compete all as specified and as directed.
Supply and fixing of steel window with side hung shutters incl. projecting / box type hinges with steel handles steel peg stay and holdfast etc complete without glazing bar devetailed or welded including shop coat red oxide primer compete all as specified and as directed.
Supply and fixing of Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixingg in opening as per specification & drawing etc complete all as specified and directed.
Material and labour for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixingg in the frame at site as per specification & drawingcomplete all as specified and directed.
Supply and fixing of 100 mm Butt hinges, stainless steel complete all as specified and directed
Supply and fixing of 75 mm Butt hinges, stainless steel complete all as specified and directed
Supply and fixing of 50 mm Butt hinges, stainless steel complete all as specified and directed
Supply and fixing of Aluminium anodised barrel tower bolt, extruded type, 200 mm long, complete all as specified and directed.
Supply and fixing of Aluminium anodised barrel tower bolt, extruded type, 100 mm long, complete all as specified and directed.
Supply and fixing of Aluminium extruded handles, fabricated type, anodized, 150 mm size, complete all as specified and directed.
Supply and fixing of Aluminium extruded handles, fabricated type, anodized, 100 mm size, complete all as specified and directed.
Supply and fixing of Aluminium alloy, 300 mm long ,anodised, sliding door bolt with hasp,staple (bolt type) and fixingg clips of sheet, cast or extruded sections and fixingg bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.
Supply and fixing of Aluminium alloy, 150 mm long ,anodised, sliding door bolt with hasp,staple (bolt type) and fixingg clips of sheet, cast or extruded sections and fixingg bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.
Supply and fixing of in repair 300mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.
Supply and fixing of 40 mm wide flap when open, brass bright finish continuous (Piano) hinge complete all as specified and directed.
Supply and fixing of stainless steel magnetic hinges 19 mm long L type suitable for modular kitchen cabinet shutters complete all as specified and directed.
Supply and fixing of of stainless steel telescopic ball bearing drawer channel of size 250mm x 46mm x 12.7mm, width of flap 30mm for modular kitchen. complete all as specified
Supply and fixing of 3 mm dia stainless steel cup plate rack 4" x 17" x 20" suitable for modular kitchen cabinet shutters complete all as specified and directed.
Supply and fixing of 3 mm dia stainless steel meals plate rack 6" x 17" x 20" suitable for modular kitchen cabinet shutters complete all as specified and directed.
Supply and fixing of 3 mm dia stainless steel bottle basket 8" x 17" x 20" suitable for modular kitchen cabinet shutters complete all as specified and directed.
Supply and fixing of 3 mm dia stainless steel catlery basket 4" x 17" x 20" suitable for modular kitchen cabinet shutters complete all as specified and directed.
Supply and fixing of 3 mm thick sheet glass and glazing with oil putty in squares not exceeding 0.50 Sqm in Eachpane etc complete all as specified and as directed.
Supply and fixing of 3 mm thick figured glass pin head type and glazing with oil putty in squares not exceeding 0.50 Sqm in Eachpane etc complete all as specified and as directed.
Supply and fixing in repair sheet glass, pin head type 3.00 thick ordinary quality and glazing with oil putty in squares not exc 0.50 sqm in each pane fixed with wooden beads (painted with two coats of synthetic enamel paint over a coat of primer of reqd tint) or glazing clips with oil putty complete all as specified and as directed.
Supply and fixingg of 5.5 mm thick sheet glass and glazing with oil putty in squares exceeding 0.50 Sqm in Eachpane including hacking out old unserviceable one etc complete all as specified and as directed.
Supply and fixingg of stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc complete all as specified and as directed.
Supply and fixing of in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc complete all as specified and as directed.
Supply and fixing in rpair of 3 mm thick figured glass pin head type and glazing with oil putty in squares not exceeding 0.50 Sqm in Eachpane fixed with wooden beads or glazing clips with oil putty including hacking out old unserviceable one etc complete all as specified and as directed.
Supply and fixing of in repair 100 mm Butt hinges, cold rolled mild steel, medium weight complete all as specified and directed
Supply and fixing of in repair 75 mm Butt hinges, cold rolled mild steel, medium weight complete all as specified and directed
Supply and fixing of in repair 50 mm Butt hinges, cold rolled mild steel, medium weight complete all as specified and directed
Supply and fixing of in repair Aluminium anodised barrel tower bolt, extruded type, 200 mm long, complete all as specified and directed.
Supply and fixing of in repair Aluminium anodised barrel tower bolt, extruded type, 100 mm long, complete all as specified and directed.
Supply and fixing of in repair Aluminium extruded handles, fabricated type, anodized, 150 mm size, complete all as specified and directed.
Supply and fixing of in repair Aluminium extruded handles, fabricated type, anodized, 100 mm size, complete all as specified and directed.
Supply and fixing of in repair Aluminium alloy, 300 mm long ,anodised, sliding door bolt with hasp,staple (bolt type) and fixingg clips of sheet, cast or extruded sections and fixingg bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.
Supply and fixingg of tubular curtain rod, stainless steel ss-304, 20 mm dia 1.25 mm thick fixed to brackets complete all as specified and as directed.
Material and labour for 18 mm thick wood grain printed colour PVC prelaminated board for cupboard partition & shelf complete all as specified and as directed.
Stripping out tarfelt from old roof surfaces and removing unserviceable materials from site of work in low laying in outside MOD area complete all as specified and as directed.
Material and labour for rendering 15 mm(Avg) thick in Cement Mortar 1:4 finished even and smooth witht using extra cement after preparation of old roof surface with brushing and applied neat cement slurry with 3.0 Kg of cement per Square Metre existing surface complete all as specified and as directed
Supplying and laying 3mm thick APP (Atactic Polypropylene Polymer) modified prefabricated five layer, weight not less than 3.6 kg/Sqm water proofing membrane, black finished reinforced with non woven polyester matt laying over a coat of bituminous primer @ 0.40 Ltr / Sqm and two coats of Bitumen based UV reflective paint with aluminium finish over APP membrane. The membrane shall be laid using butane torch and sealing all joints etc all as specified in Para 11.44.5 of SSR Part I complete all as specified and as directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for, etc complete all as specified and as directed.
Dismantling plain or corrugated steel sheeting, any gauge, any thickness, including Nainital or similar pattern roof coverings complete all as directed.
Supply and fixing of mild steel work as in tubular trusses , purlins, and posts etc including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S.1161-1979 grade St.-240 etc complete all as specified and as directed.
Supply and fixing of Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc complete all as specified and as directed.
Supply and fixing of Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc complete all as specified and as directed.
Material, labour and fixed of aluminium snap grid frame work for false ceiling, size of grid 605 x 605 mm, including aluminium main/closs tee of size 35mm x 23mm x 1.5 mm ( minimum) aluminum TEES section and aluminium angle of 25mm X 25mm X 1.5mm thick, sutiable type GI wire hanging arrangement with adjuster all as specified in clause no 10.38 in SSR part-I and including 4mm thick high pressure steam cured non asbestos fibre cement designer board as per IS 14862 with applying of two coats of acrylic distemper over a coat of primer including taking out old false ceiling complete all as specified and directed.
Material, labour and fixed of aluminium snap grid frame work for false ceiling, size of grid 605 x 605 mm, including aluminium main/closs tee of size 35mm x 23mm x 1.5 mm ( minimum) aluminum BULBED TEES section and aluminium angle of 25mm X 25mm X 1.5mm thick, sutiable type GI wire hanging arrangement with adjuster all as specified in clause no 10.38 in SSR part-I and including 10mm thick plaster of paris ceiling (Gypsum anhydrous) as per IS 14862 with applying of two coats of acrylic distemper over a coat of primer including taking out old false ceiling complete all as specified and directed.
Supply and fixing of PVC (SWR) floor trap of 75 mm outlet plain with grating including jointing with solvent cement etc complete all as specified and as directed.
Supply and fixing of PVC (SWR) multi floor trap of 75 mm outlet plain with grating including jointing with solvent cement etc complete all as specified and as directed.
Supply and fixing of PVC (SWR) gully trap 125/110 mm including jointing with solvent cement etc complete all as specified and as directed.
Supply and fixingg of uPVC of type-B for use in soil and waste discharge systems, single socket, 110 mm bore in any length including rubber ring joints and fixed to walls with clips and other standard material and all as specified in IS 13592 including taking out old one complete all as specified and directed.
All as per item no 93 above but 75mm bore complete all as specified and directed.
Supply and Fix, 110 mm bore PVC (SWR) bends any radius, with access door,complete all as specified and directed.
Supply and Fix, 75 mm bore PVC (SWR) bends any radius, with access door,complete all as specified and directed.
Supply and Fix, 110 mm bore PVC (SWR) branch pipe (single Y) equal or unequal ,complete all as specified and directed.
Supply and Fix, 75 mm bore PVC (SWR) branch pipe (single Y) equal or unequal ,complete all as specified and directed.
Supply and Fix, 110 mm bore PVC (SWR) Junction single (single T) equal or unequal ,complete all as specified and directed.
Supply and Fix, 75 mm bore PVC (SWR) Junction single (single T) equal or unequal ,complete all as specified and directed.
Supply and fixingg of 15mm bore galvanised steel tubes, medium grade with all fitting and fixed to walls, ceiling, floors including taking out old pipe complete all as specified and as directed.
Supply and fixingg of 20mm bore galvanised steel tubes, medium grade with all fitting and fixed to walls, ceiling, floors including taking out old pipe complete all as specified and as directed.
Cutting chases, pinning in, making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunsheds, shelves, lintel etc. and cutting chases for concealed water tubing or concealed conduit wiring etc. complete all as directed.
Supply and fixingg in repair of bib cock cast copper alloy screwed down with long body with wall flange, and fixed for 15 mm bore GI tube pipe and all accessories complete all as specified and as directed. complete all as specified. Make :- Cat no 272210120031(DHAARA) of Somany or equivalent model of make list as given in PS as approved by GE.
Supply and fixingg in repair of chromium plated pillar cock cast copper alloy screwed down with long body with wall flange, and fixed for 15 mm bore GI tube pipe and all accessories complete all as specified and as directed. complete all as specified. Make :- Cat no 272210120011(DHAARA) of Somany or equivalent model of make list as given in PS as approved by GE.
Supply and fixing of in repair 15 mm bore chromium plated stop valve with crutch handle ,fancy type , screwed both ends for iron pipes etc complete all as specified and directed. Make :- Cat no 272210120071(DHAARA) of Somany or equivalent model of make list as given in PS as approved by GE.
Supply and fixing of in repair 15 mm bore chromium plated stop valve ( concealed type ) with crutch handle ,fancy type , screwed both ends for iron pipes etc complete all as specified and directed. Make :- Cat no 272210120211(DHAARA) of Somany or equivalent model of make list as given in PS as approved by GE.
Supply and fixing of in repair Gun-metal, globe or gate valves 15 mm bore, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.
Supply and fixing of in repair Gun-metal, globe or gate valves 20 mm bore, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.
Supply and fixing of in repair Chromium plated Shower rose 125 mm size with or without swivel joint of any size etc complete all as specified and as directed.
Supply and fixing of in repair health faucet with 1 meter tube and hook etc complete all as specified and as directed. Make :- Cat no 272150680321 of Somany or equivalent model of make list as given in PS as approved by GE.
Supply and fixing of Soap dish, chromium plated ,fixed to wall with galvanised screws etc complete all as specified and as directed.
Supply and fixing of Chromium plated tubular towel rail 600mm long between the flanges and 20mm dia , D type etc complete all as specified and as directed
Supply and Fix, in repair sheet glass corner shelf assembly consisting of 5.5mm thick sheet glass shelf with chromium plated bracket guard and railing 60cm long complete all as specified and directed.
Supply and Fix, in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.
Supply and Fix corner shelf PTMT (Set of three) fixed on walls with wooden plugs with chromium pated brass screws and cup washers complete all as specified and directed.
Supply and Fix, sinks with drainage board made of stainless steel 1mm thick, kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixingg cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, with and including taking out unserviceable one complete all as specified and directed.
Supply and Fix, Vitreous China wash down water closet pan (pedestal pattern), white , P or S Trap, (excluding fixingg bolts, flushing cistern and flush pipe) but including fixingg bolts nut and plastic water closet seat back including taking down old unservicable one etc complete all as specified and as directed.
Supply and fixing of Vitreous china squatting pan of Orissa Pattern of size 580x 440 mm ,white with ‘P’ or ‘S’ trap , front or back inlet but excluding flushing cistern and flush pipe including placing in position in floor and embedded in cushion of PCC type E2 ( using 40 mm graded crushed stone aggregates), 1:5:10 and finishing the top surfaces to match with the existing flooring complete all as specified and as directed
Supply and fixingg of Vitreous china , single piece -WC with PP soft close seat cover, hinges, floor mounted water saving dual flushing EWC and white colour with concealed S-trap or P-Trap, white, 658 x 360x 775 mm, including connection to drain (or outgoing pipe) etc all as specified and as directed. Make Cat no Jupiter(Signature Collection) of Somany or equivalent model of make list as given in PS as approved.
Supply and fixing of in repair PVC (Plastic polymer Cistern) valve less, Symphonic dual action type, flushing cistern of capacity 10 litres, low level, white with inlet, ball valve, manually operated with one PVC ball valve horizontal plunger type including provision of 32mm PVC flush pipe of required length including 450 mm long PVC connection and making connections and good to disturbed surface with cement sand mortar 1:3 complete all as directed by Engineer-in-Charge
Supply and fixing of in repair Vitreous china wash hand basin, white,ISI Marked, flat back of size 550 mm x 400 mm including bracket, cutting for and pinning the ends of brackets or erecting stands also including brass chromium plated waste coupling 32mm dia, PVC flexible waste pipe of adequate length and dia etc complete all as specified and as directed by Engineer-in-Charge .
Supply and fixing of in repair Plastic water closet seat, and cover white , closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device etc complete all as specified and as directed by Engineer-in-Charge
Supply and fixing of in repair 32 mm dia waste coupling suitable for kitchen sink waste pipe etc complete all as specified and as directed by Engineer-in-Charge .
Supply and fixing of PVC connection pipe 15 mm size with PTMT nuts of length 450 mm long etc complete all as specified and as directed by Engineer-in-Charge .
Supply and fixing of in repair Rotational moulded polyethylene 500 ltrs capacity water storage tanks ,white or black colour , three layered, (ISI marked) (cylindrical vertical with closed top) hoisted and fixed in position including 20mm dia GI medium grade over flow pipe, approx lenght 1.5 mtr, 25 mm dia wash out pipe with pluged at one end including 20 mm PTMT ball valve high pressure with polythene float and nut etc complete all as per SSR Part-I ,specified and as directed.
Supply and fixing of in repair Rotational moulded polyethylene 1000 ltrs capacity water storage tanks ,white or black colour , three layered, (ISI marked) (cylindrical vertical with closed top) hoisted and fixed in position including 20mm dia GI medium grade over flow pipe, approx lenght 1.5 mtr, 25 mm dia wash out pipe with pluged at one end including 20 mm PTMT ball valve high pressure with polythene float and nut etc complete all as per SSR Part-I ,specified and as directed.
Supply and fixing of in repair 20 mm Ball valves ISI marked high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 210gms) etc complete all as specified and as directed.
Supply and fixing of in repair of 15 mm size Bib tap standard fancy type of PTMT, any colour high pressure screwed for iron pipes (minimum weight 90 gram) complete all as specified and directed.
Supply and fixing of in repair 15 mm size Pillar tap fancy type of PTMT, any colour high pressure screwed for iron pipes (minimum weight 120 gram) complete all as specified and directed.
Supply and fixing of in repair 15 mm size Stop valve of PTMT, any colour high pressure screwed for iron pipes (minimum weight 90 gram) complete all as specified and directed.
Supply and Fix, brass CP fancy centre hole basin mixer for mixing hot & cold water screwed down for iron pipe 15 mm bore and fixed, tube inlcuding taking out unserviceable existing one complete all as specified and directed. Make:-Cat no 272200120051 (Dhaara) Somany or equivalent model of make list as given in PS as approved by Engg-in-Charge.
Supply and fixingg in repairs 15 mm dia brass CP fancy wall mixer 2-in-1 system with L Bend for mixing hot & cold water screwed down for iron pipe and fixed as in repairs complete with hand shower rose and tube. Make:-Cat no 272200120011 (Dhaara) Somany or equivalent model of make list as given in PS as approved by Engg-in-Charge.
Supply and fixingg in repairs toilet paper holder, brass chromium plated complete all as specified and directed. Make Cat No 272130120091 of Somany or equivalent model of make list as given in PS
Material and labour for applying two coats of synthetic enamel paint over a coat of pink primer on new wood or wood based surface exceeding 10 cm in width or girth including necessary preparation of surfaces complete all as specified and directed.
Material and labour for applying two coats of synthetic enamel paint over a coat of pink primer on new wood or wood based surface n.exc.10 cm in width or girth including necessary preparation of surfaces complete all as specified and directed.
Material and labour for applying two coats of synthetic enamel paint over a coat of red oxide primer on new steel or iron surface exceeding 10 cm in width or girth including necessary preparation of surfaces complete all as specified and directed.
M & L for preparing surfaces of wood and wood based materials, steel and iron work, new or old, of any description and girth, not otherwise described, and treated with a coat tar or coal tar black paint complete all as specified and directed.
M & L for preparing surfaces of wood and wood based materials, new or old of any description and girth, not otherwise described and treated with two coats of french polishing including cleaning and preparing the surfaces complete all as specified and directed.
Material and labour for Preparation of new plaster wall surface and applying two coats of 1st quality acrylic washable distemper (ready mixed) having VOC content less than 50 gms/litre of required colour shade and as per manufacturer’s specification over a coat of primer over a coat of 1.0 mm thick cement base wall putty complete all as specified and directed.
Material and labour for Preparation of new plaster ceiling surface and applying two coats of 1st quality acrylic washable distemper (ready mixed) having VOC content less than 50 gms/litre of required colour shade and as per manufacturer’s specification over a coat of primer over a coat of 1.0 mm thick cement base wall putty complete all as specified and directed.
Material and labour for preparation of old or previously treated surfaces of wall and applying a coat of white wash complete all as specified and directed.
Material and labour for preparation of old or previously treated surfaces of ceiling and applying a coat of white wash complete all as specified and directed.
Material and labour for preparation of old internal wall surface of building/structure and preparation of old surfaces and applying one coats of acrylic washable distemper complete all as specified and directed.
Material and labour for complete removal of existing finishing of internal wall surface of building/structure by mechanical appliance and preparation of old surfaces and applying two coats of 1st quality acrylic washable distemper (ready mixed) having VOC content less than 50 gms/litre of required colour shade and as per manufacturer’s specification over a coat of primer over a coat of primer over a coat of 1.5 mm thick cement base wall putty complete all as specified and directed.
Material and labour for preparation of old internal ceiling surface of building/structure and preparation of old surfaces and applying one coats of acrylic washable distemper complete all as specified and directed.
rMaterial and labour for preparation of new wall surfaces and applying two coats of acrylic exterior weather resistant paint(weather proof paint @ 1.67 ltr/10 sqm per two coats ) of required colour shade and as per manufacturer’s specification over a coat of acrylic exterior primer((@ 2.20 kg/10 sqm) complete all as specified and directed.
Material and labour for preparation of old or previously treated surfaces of wood or wood based surfaces and applying one coat of synthetic enamel paint exceeding 10 cm in width or girth including preparation of surfaces complete all as specified and directed.
Material and labour for preparation of old or previously treated surfaces of steel or steel based surfaces and applying one coat of synthetic enamel paint exceeding 10 cm in width or girth including preparation of surfaces complete all as specified and directed.
Note: Schedule of credit (SCHEDULE OF CREDIT) amount of Rs ₹ ___________ mentioned on Page No ____ shall be deducted from the total quoted amount of BOQ.
KAY CEE CO. INDIA
A M CHOUDHURY AND CO
SANDHUSONS
MS J B CONSTRUCTION AND CO
M/S DILIP GOSWAMI
M/S AK SINGH
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .