PROVN OF SECURITY FENCING ALONGWITH CONCERTINA WIRE AND ALLIED FACILITIES IN CHHOTA BAZAR OF 501 AD MSL REGT (MRSAM) UNDER GE NASIRABAD

Amount

Excavation in post holes (or similar holes) each n. exc 0.5 cum getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n. exc 50m and making good surface in soft/loose soil complete all as specified and directed.

Surface dressing n exc 15 cm deep any type of soil complete all as specified and directed.

M&L PCC 1:4:8 type D-2 (40mm graded stone off) in fdn filling and mass concrete complete all as specified and directed.

M &L for hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts;posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified & directed.

M&L for MS Flats for supports or stays for chain link fencing and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.

Supply only Chain link fencing incl line wires, any mesh, size and type to any standarards, rails straining bolts etc incl provn of binding wire complete all as specified and directed.

Fixing of Chain link fencing incl line wires, any mesh, size and type to any standarards, rails straining bolts etc incl provn of binding wire complete all as specified and directed.

S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other to be fitted with washers and one hexagonal or square nuts, exc 5cm and n.exc 10cm complete all as specified and directed.

S&F Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins, etc complete all as specified and directed.

S&F Mild steel round bars 6 mm dia and over as in strengthening bars for bending cranking spirallt for hooking for chain link, hooking end and welding with flats of chain link fencing Fe 410W (Gde E-250 ) quality -A or FE-290 (Gde E-165) complete all as specified and directed.

M&L for PCC in embedding of chain link fencing, rounded or chamfered on edges type B1 (1:2:4) using 20 mm graded aggregate including excavation and necessary formwork complete all as specified and directed.

M&L for preparation of new iron surfaces of any desc over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of new steel surfaces of any desc n.exc 10cm in width or girth when when unconnected with other painting or when painting in diff tint and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F in repair, Steel Concertina Coil (Razor cut) of super profile of 600 mm dia stress in position hot dipped Galvanised steel wire coated with CLR anti corrosive paint making diamond shape with the help of dove tail clip (18 SWG) the coil fixed with razor wire at points were coil touch the bottom layer wire with help of hog rings (14 SWG) with and including all fittings like fastener, clips, luggs rings etc. complete all as specified and directed.

S&F Reinforced concrete pipes, class NP2, Dia 200 MM laid and jointed complete with collars and tested as per manufactures instruction complete all as specified and directed

M&L Concrete bed to drain pipes including packing under and haunching against the sides of pipe as cradle after they are laid and tested in cement concrete 1:3:6 type C-2 (Nominal mix using 20mm graded crushed stone aggregate for 200 mm bore pipes complete all as specified and directed.

Excavation in trenches, not exc 1.5m wide and not exc 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. not exc 10 sq. m on plan and not exc 1.5m in depth and getting out in hard/dense soil complete all as specified and directed.

M&L for PCC 1:3:6 , type C-2, using 40mm graded crushed stone aggregate as in foundation, filling and mass concrete complete all as specified and directed.

M&L for Sub Class 'B' brick work with old size bricks straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed.

M&L for 15mm thick cement plaster on fair faces of bricks surfaces or concrete surfaces in CM 1:4 finished even and fair without using extra cement complete all as specified and directed.

M&L for preparation of new plastered surface of walls and applying three coats of white wash complete all as specified and directed.

Excavation in trenches not exc 1.50 Metre wide and not exc 1.50 Metre depth for laying of UG Cable/Pole/Stays etc getting out in soft/loose of soil complete all as specified and as directed

Excavating in trenches, not exc. 1.50 Metre wide and exc. 1.50 Metre but not exc. 3.00 Metre in depth, for Foundation of Poles/Stays, etc. and getting out in soft/loose soil complete all as specified and as directed.

Returning. Filling in Including Spreading, Leveling, Watering and Well Ramming in layers not exc. 25 Cm thick in Soils complete all as specified and as directed

Removing Surplus Soil to a distance not exc 50.00 Metre away and depositing where directed at a level not exc 1.50 Metre above the Starting Point complete all as specified and as directed

M&L boaring holes horizontally under Road by trenchless technology without damaging the surface of road as per given/ directed depth below the road surface with the help of boring machine/ or by manual means and laying of DWC Pipe of any dia for passing of UG cable all as specified and as directed

S&F Double Wall Corrugated(DWC) HDPE Pipe of size 63 mm Outer Dia x 50 mm Inner Dia Pipe as per new IS-16205 (for electrical cable uses) in protection of UG Cable laid in trenches of following sizes complete all as specified and as directed, Note Cost of pipe coupler with rubber ring is deemed to be included in the unit Quoted Rate

Supply and laying XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, of cross-sectional area 4 core x 16 Sqmm, laid in trenches/ surface of Wallin DWC Pipe including Brass Cable Glands Mild Steel Flat Iron Clamps, etc. and testing complete all as specified and as directed

MSL for earthing complete with galvanised steel earth plate electrode 60cm X 60cm X 6mm thick, burried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of plate not less than 1.5 mtr below normal ground level connected to galvanized earth lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or stee all as shown in electrcal plate No 3 of SSR Part-I connected to continious earth wire or main switch board/panel etc all as specified or indicated and testing on completion including provision of earth wire protection by 15 mm dia, light grade Gl pipe and watering pipe shall be 20 mm bore medium grade Gl pipe including excavation & earth work, PCC pit with RCC cover, charcoal, salt, funnel, Gl wire and protection pipe upto 7.5 mtr complete all as specified and directed

Materials and Labour for earth continuity conductor or main Earthing lead of 4.00 mm dia Gl wire, fox to pole, wall or buried in ground or down Gl pipe or any type indicated situation for loop earthing/ lighting conductor etc as required with saddles and fixing screws for roof conductors and down conductors above ground level complete all as specified and as directed.

Supply, erecting and fixing in true vertical position, Swaged and welded MS Steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP-31 (9 metres long) welded reduced section and longitudinal weld throughout entire length of pole, including two coats of black bituminous paint externally upto planting depth and remaining exterior portion of pole shall be provided with one coat of red oxide primer and two coats of aluminium paint complete all as specified as directed. Note:- (a) Numbering of the poles shall be done with sticker/ synthetic enameled paint letters of black colour in a 15cm dia yellow colour circle background. Cost of numbering of pole shall be deemed to included in unit rate. (b) The rates also include drilling of holes in steel tubular poles and provision of precast holes in PCC poles for fixing 'D' iron, clamps and hooks for continuous G.I. earth wire etc. to the required size and number.

Supply and fix bracket for street light fittings made out Gi pipe of light grade 1.2 m long 32 mm pipe each bent to shape & size required & fixed to pole with and including flat iron clamps 02 Nos made out of 32 x 6 mm MS flat foxed iron including GI Nuts, bolts and washers and painting of clamps and street light brackets with one coat of aluminium paint over a coat of red oxide primer all as specified and as directed

M&L Cement Concrete 1:4:8 (40mm graded aggregate) as Lean Concrete in Foundation of Poles, Stay Assembly, etc., including Form-work (as/if required), complete all as specified and as directed

M&L Cement Concrete 1:2:4 (20mm graded aggregate) as in Coping of Poles, etc. and finishing the Concrete surfaces Fair and Even including necessary Formwork required at Site(s), complete all as specified and as directed.

Supply and fix three core 2.5 sqmm PVC insulated and PVC sheathed stranded copper conductor street light complete all as specified and directed.

Supply & fixing Street light Panel Auto timer switch for auto ON/OFF of street lights in sheet steel enclosure, including all accessories like contactor, Astronomical timer switch, MCB, pre wired, of 40 Amp. 3 Pole, 230 Volt, Astronomical timer switch, conforming to IS/IEC 61439 & 60529, with in-built short circuit protection and class 'H' insulation including making all electrical connections, fixing of timer switch box by providing all hardware as required complete all as specified and directed. Make: INDOASIAN Cat no:- TL040AS0 or equivelent in C&S/ Havells

S & F Thermoplastic cable junction box of size 205mm x 255mm x 112mm, IP 66, halogen free and weather proof with locking arrangement and necessary mounting arrangement on pole with MS clamp, nut bolt, washer, for out door installation complete with connector terminal for connecting cable, knockouts for cable entry up to the size of 25 Sqmm x 4 core complete all as specified and directed. Note: Contractor shall provide cable lugs and gland of suitable size if required on site for connecting cable in junction box.

S&F MCB SP 6 to 32 Amps capacity suitable for security light all as specified and directed.

Supply & fixing and testing LED street light fitting 70 Watt, 230 V AC outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

BSB CONSTRUCTION COMPANY (BID ID -3465401)

TANISHQ ENTERPRISES (BID ID -3463992)

MITTAL ENTERPRISES (BID ID -3466763)

M/s SUNIL ENTERPRISES (BID ID -3466892)

Shree Sai Ram Enterprises (BID ID -3467124)

niranjan singh and company (BID ID -3466466)