Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.5 LAccepted-Finance VILL BARABELUN PS BHTAR DIST PURBA BARDHAMAN | BARABELUN | PURBA BARDHAMAN | WEST BENGAL | 713125 | L1 | Accepted-Finance L1 | |
| 2 | L2₹1.5 L+₹5,381 (3.62%)Rejected-Finance 3 NO BANJETIA BANJETIA MURSHIDABAD WEST BENGAL 742102 | MURSHIDABAD | MURSHIDABAD | WEST BENGAL | 742102 | L2 | Rejected-Finance L2 | |
| 3 | L3₹1.6 L+₹16,405 (11.0%)Rejected-Finance VILL KEUNDILAMBONI P O GULADAHA P S GARHBETA DIST PASCHIM MEDINIPUR WEST BENGAL PIN 721258 | GARHBETA | PASCHIM MEDINIPUR | WEST BENGAL | 721258 | L3 | Rejected-Finance L3 |
Tender Value
Refer Docs
EMD Value
₹3,000
Closing Date
19 May 2023, 4:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer
Paschim Medinipur Zilla Parishad
Installation of Lowmast light at Khanamohan Gp Paschim Satkona Mouza Debra Panchayat Samity area in the District of Paschim Medinipur.(15th CFC 2022-23) Activity code- 66448337
2023_ZPHD_528157_1
PMD/ N-161/2023-24
Open Tender
Electrical Work/ Equipment
Item Rate
30 days
Paschim Medinipur Zilla Parishad
Installation of Lowmast light at Khanamohan Gp Paschim Satkona Mouza Debra Panchayat Samity area in the District of Paschim Medinipur.(15th CFC 2022-23) Activity code- 66448337
4 documents required · 4 mandatory
₹500
₹3,000
Paschim Medinipur Zilla Parishad
14 Sept 2023
12 May 2023
22 May 2023
12 May 2023
19 May 2023
12 May 2023
15 May 2023
Amount
Supplying & Delivery at site of 9 mtr. GI Octagonal pole including arrangement of arms and monkey ladder fixing with octagonal cross section and contentiously tapered with single longitudinal welding.Total length of the pole will be 9 mtr. ,thickness of sheet should not be less than 3 mm, diameter of the pole at bottom & top will be 170 mm and 70 mm respectively. Pole shafts shall be provided with fixed flange plate of minimum 16 mm thickness with a provision of minimum 4 nos fixing foundation hot dipped galvanised bolts. All other hardware i.e nuts& bolts, washers, spring washers, flats, split pins etc. Should be hot dipped galavanised. (Utkarsh/BPP/CG/approved make.)
Making of RCC foundation with M20 Grade of concrete (6:3:1)with graded stone chips (20mm normal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes for soil bearing capacity of 8 to 10 ton/sqm at a depth of 1.00m to 1.50m, collaring shall be 200mm above the ground level .
Supplying fitting and fixing 1.1 KV grade 4sq mm 2 core PVC insulated amounted Alluminium conductor cable for hanging make – Havells /Pollycab / KEI /Glostar
Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed
Supplying and fixing 6-32 amp MCB DP,240 v ( Havells/standard/anchor/legrand) on existing sintex box (IP65) on pole. (as per instruction of EIC)
Supply and fixing manual timer 24 hours and sintex box with contactor, 1 no. 6-10A MCBSP C Type, Toggle bypass switch fixed on sintex box (in side 350 mm x 270 mm x 190 mm) on pole incl. supply and fixing of clamp, nut bolts as required and necessary connection. (as per instruction of EIC)
Supply & fixing of LED flood light luminaries 150W LED (IP65 with efficiency > 100 lumen/ watt and < 20% lumen depreciation over min. 2 years) With pressure die cast aluminium housing and heat resistant toughened flat glass complete of approved make with constant current LED driver. Make – Crompton or equivalent make of philips/ Havells / Bajaj as approved by EIC.
Supplying and Drawing 1.1KV single core standard ‘FR’ PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in 19mm sia 3mm thick Polythene Pipe and by the prelaid GI fish wire and making necy. Connection as required 2×36/0.3(2.5sqmm) + 1×22/0.3(1.5 sqmm) as ECC(from Loop to fittings)
Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables for following XLPE/PVC armoured cable. 2C 4 sqmm
Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials : 2C 4 sqmm
Earthing By 50mm dia ISI-Medium GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level
Excavation of soil for installation of Earth Electrode and filling & ramming.For Morrum Soil
Providing & fixing Concrete Sign Board as per IRC specification of size 900 x 750 x 37 mm. thick made with RCC 1:1½:3 with pakur variety stone chips reinforced with double layer IRC febric (75 x 75 mm. mesh) and fixed with necessary nuts & bolts on two RC precast posts 100 mm. x 150 mm. of height 2.65 m. of which top 750 mm. is of section 100 x 13 mm. and 1.90 metre above GL & 0.75 metre below GL including digging hole, repacking the same with cement concrete 1:3:6 with jhama khoa or with local stone chips etc. complete including painting two coats on both faces lettering sign marks etc. as per direction of the Engineer-in Charge.
GOUTAM GHOSH
MIRAJUL ISLAM GAYEN
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .