GE/BAS-32/2024-25 Special repair to building No P-192 (01 to 06) and certain revneue and minor works at Janglote under GE Basoli

Amount

Excavation in trenches n exc 1.5 m wide and nexc 1.5 m in depth for foundation of pole/stay and laying of UG cable/GI pipe and getting out in any type of soil complete all as specified and directed.

M&L returning, filling and including spreading, levelling , watering and well ramming in layers not exceeding 25 cm complete all as specified and directed.

Removing excavated material nexc 50m and depositing where directed at a level nexc 1.5mtr above the starting point , complete all as specified and directed.

Surface excavation not exc 30cm deep and averaging 15cm deep and gettingout in any type of soil complete all as specified and directed.

M&L Reinforced cement concrete M-25 (Design mix) using 20mm graded crushed stone aggregates as in foundations, including rafts, footings, foundation beams, plinth beams, bases of columns etc basement slabs, under-reamed piles and mass concrete complete all as specified and directed

M&L Reinforced cement concrete M-25 (Design mix) using 20mm graded crushed stone aggregates as in slabs, supported on walls, beam and columns in floors, and in shelves and the like complete all as specified and directed.

M&L Reinforced cement concrete M-25 (Design mix) using 20mm graded crushed stone aggregates as in columns, pillars, piers, posts and struts complete all as specified and directed

M&L Reinforced cement concrete M-25 (Design mix) using 20mm graded crushed stone aggregates as in beams ,chajja,cantilevers, bressummers, lintels over 1.5 mtr span complete all as specified and directed.

Steel Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams,sides and sofits of foundation and plinth beams and similar works; vertical or to batter for rough finished flat surfaces complete all as specified and directed

Steel Form work to sides and soffits of floor/roof beam for rough finished flat surfaces of concrete complete all as specified and directed.

Steel Form work to sides of pillars, posts, struts, piers, columns and stanchions for rough finished flat surfaces of concrete complete all as specified and directed

Steel Form work to soffits of suspended slabs such as roof slabs, floor slabs etc not exceeding 200mm thick complete all as specified and directed.

M&L TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed

-ditto- here-in-before but 8mm dia and over upto and including 10mm dia as in stirrups, spacers, binders complete all as specified and directed.

Taking down chowkats or frames with shutter (without taking off shutter from the frames) n. exc 1.50 Sqm each complete all as specified and directed.

Taking down chowkats or frames with shutter (without taking off shutter from the frames) exc. 1.50 Sqm n.exc 4 Sqm each complete all as specified and directed.

Taking down shutter of any description area exc 1.00Sqm but not exc 2.00 Sqm each. complete all as specified and directed .

M&L WPC Double Prelam Door Frame(Chowkhat) of Size 120mm x 50mm with a wall thickness of 5mm(+/- 0.25), made out of extruded 5mm(=0.25) mm thick PVC Sheet of Density 600kg/cbm manufactured by an ISO 9001-2015 certified company and by joining 3 Nos heat moulded PVC Sections. The high section of size 35 x35 mm shall be made from plain colour PVC sheet of 5mm(=/- 0.25 mm) thickness. The inside section will be covered with 5mm thick PVC sheet'C' shape covering section of size 120mm x 50mm. At centretop position 5mm(+0.25mm) thick 50 x50 x50 mm pattam section should be pasted with solvent cement adhesive to make double pattam of frame. The frame shall be mitre cut at two corners & joined with 4 nos of 150mm long 'L' brackets of 19 x 19 mm M.S sq, Tube or fusion heat welding process. The two vertical door frames are to be reinforced with 25 x 25 mm M.S sq Tube of 19 gauge throughout the frame. The Door Frame shall be fixed to the wall using 8/100mm fischer screws. A minimum of 4 nos of screws to be provided for each vertical member & minimum 2 Nos. for horizontal member etc. complete as per manufacture's specification & as directed

M&L WPC DOOR- SOLID CORE consisiting of solid core single Leaf Flush Door of 25mm thickness, lipped with 15mm(5mm x 3) thick x 30 mm width on one stiles and top rails & 10mm (5mm x 2) thick x 30 mm width on the other stiles & bottom rails. The inner panel laminated with 2mm thick termite proof, water proof & fire resistant moulded PVC sheet with 2,4,6 raised panel design in different plain &/or prelam colors on one side after routing the mouldd design on flush door & 2mm plain and/or prelam PVC sheet on other side using rubber based adhesive on flush door & solvent cement adhesive on the lipping etc. complete as per, manufacture's specification and directed.

M&L for pressed steel frames for doors with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate etc. complete of frame size 105 x 60 mm complete all as specified and directed .

M&L for pressed steel frames for doors with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate etc. complete of frame size 125 x 60 mm complete all as specified and directed .

M&L for providing cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates for filling in the pressed steel door frame/hold fast complete all as specified and directed .

S&F 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed .

S&F For Glazed and skelton shutters 35mm thick of 2nd class HW open rebated and prepared to receive glass or wire gauze etc. shutters divided in square with sash bars, size of members of shutters as specified in SSR Part-1, secton 8, clause 8.20(a) complete all as specified and directed.

S&F Powder Coating aluminium single or double leaf door shutter in single or two panels with standared aluminium section weighing 0.55 kg/m including necessary jointing cleat, glazing clilps,rubber neoprene packing, handles 2 Nos in each door hinges,powder coated snap beading screws etc in partition of partly glazed (5mm thick tinted) and partly prelaminated board 12mm thick (bothside) including locking arrangement, using following section of Jindal or equivalent make complete all as specified and directed. (Note:- Aluminium section size specified above if not available in the market next immediate higher size of same make shall be provided without any extra cost to the Govt.)

S&F for powder coating aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections as mentioned below weighing 0.55 kg/m and glazed/ gauged with glass pans/ stainless steel fly proofing including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinges type B-21 100mm long (2 no.) American suitable handle (1 no.) of size 75mm, tower bolt 100mm long(2 Nos) etc complete all as specified. size of rail and style 83-84mm/ 44-45mm complete all as specified and directed .

S&F Galvanised MS wire cloth 0.46mm nominal dia of wire and average width of aperture 1.18mm, complete all as specified and directed.

S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed.

S&F for 100 mm butt hinges,Stainless steel complete all as specified and directed complete all as specified and directed.

S&F stainless steel barrel tower bolts 150 mm long of extruded section fixed with stainless steel screws ,ISI marked, complete all as specified and directed .

S& F mild steel Peg set of six hooks size 50mm to 60mm complete all as specified and directed.

S&F Stainless steel handle ,150 mm size. complete all as specified and directed.

S&F 300 mm long stainless steel, sliding door bolt with hasp, staple (bolt type dia not less than 16 mm) including fittings and fixtures , ISI marked, complete all as specified and directed .

S & F floor stopper 150mm length of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed

S&F 100 mm size hasp and staple aluminium anodised including bolt to hinge plate and fixed with screw,complete all as specified and directed

M&L for preparation of treated/un-treated wooden surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed .

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified including Dismantling asbestos cement (corrugated, semi corrugated etc sheets in roof covering complete all as specified and directed .

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified including Dismantling asbestos cement (corrugated, semi corrugated etc sheets in roof covering complete all as specified and directed .

M&L steel window/ventilator factory made out of box type frame and shutter (double shutter, one for glazing another for flyproofing) made out of section using flash butt welding, hinges shall be provided to both shutters complete including all fittings and grills, all as per drg No CEPZ/TD/27/13 Sh 1/4 to 4/4 all as complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed .

M&L for preparation of new steel surfaces of any description not exc 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed .

M&L for preparation of old steel surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed .

Dismantling timber scantlings unframed work, 40 sq. cm and over in section, in any position complete all as specified and directed .

Material and labour for plain cement concrete type B-1 1:2:4 (20mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses,lacing courses, parapets and railings upto 60 cm in height,copings, kneelers, apex stones, bed plates, kerbs ,water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.

M&L of roof treatment with the following specification - Removing existing water proofing treatment and applying water proofing treatment on horizontal or vertical surfaces by applying oil bound bitumen primer @ 0.20 Kg/sqm and providing 3mm thick APP modified water proofing membrane weighing not less than 3 Kg/sqm reinforced with non-woven polyester matt weighing not less than 160 gm/sqm, The overlap shall be minimum 100mm on transverse direction and 75 mm on longitudinal direction and sealing overlap by torch application and bonded and applying a coat of blown grade hot bitumen 85/25 over and below the membrane @ 1.20 Kg/sqm in drying over the membrane finished all as specified and as directed. NOTE :- The work shall be executed at site by the authorised applicator of APP and as approved by the GE. complete all as specified and directed .

M&L for cement concrete 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) of uniform thickness 50mm , top surface of plain concrete padding shall be finished even & fair w/o using extra cement complete all as specified and directed .

M&L for 15mm thick screed in CM 1:6 in at Roof Top Surfaces for smoothening surface of laying APP Membrane complete all as specified and directed .

M&L for Preparation of Roof Surfaces and two coat of Aluminium Paint on APP Membrane of any description, over 10cm in width or girth, not otherwise described complete all as specified and directed

Supply and fixing for 18 to 20mm thick (weight not less than 10.5 Kg/Sqm) including magnetic catch PVC Ultra Violet chemical, glosymate finish 100% termite/water proof, fire retrandent eco friendly solid board both side decorative choice laminate as in kitchen cabinet, loft cupboard etc fixed with screws to steel/ timber frame work etc complete all as specified and directed by Engineer-in-Charge.

S & F continiuous (piano) hinges, mild steel, bright finish or electro galvanised width of flaps (when open) in 30mm complete all as specified and directed by Engineer-in-Charge.

S&F in repair 110 mm bore PVC (SWR) Pipes single socketed in any length with rubber ring joints, fixed to wall complete all as specified and directed.

S&F in repair 75 mm bore PVC (SWR) Pipes single socketed in any length with rubber ring joints, fixed to wall complete all as specified and directed.

S&F PVC (SWR) Bends in any radius 110 mm bore with access door in repair complete all as specified and directed.

S&F PVC (SWR) Bends in any radius 75 mm bore with access door in repair complete all as specified and directed.

S&F in repairs for 75mm bore PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and directed

S&F PVC (SWR) branch piece single (double Y) equal or unequal provided 110 mm bore complete all as specified and directed.

S&F PVC (SWR) branch piece single (double Y) equal or unequal provided 75 mm bore complete all as specified and directed.

S&F in repairs for 110mm bore PVC (SWR) P trap plain complete all as specified and directed

S&F PVC (SWR) Vent cowl 110 mm bore in repair..complete all as specified and directed.

S&F PVC (SWR) Vent cowl 75 mm bore in repair..complete all as specified and directed.

S&F PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F Rolled sections as in main and cross beam, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plate using Fe 410-W (Gde E-250) quality'A'., complete all as specified and directed.

Erection and fixing and fabrication bronly Rolled sections as in main and cross beam, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plate , complete all as specified and directed.

S&F Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

Dismantling of structural steel/wrought iron door gate etc .complete all as specified and directed.

M&L for Rotational moulded polyethylene water storage tank 3 layer white colour water tank , non- toxic effect, algea formation protection (made from Virgin grade of polyetylene material which is duly stablized with anti-oxidentPlastic) of capacity 1000 litres, (cylindrical vertical one piece moulded with closed top), the internal and external surfaces of tanks are smooth, clean and free from any hidden internal defects, hoisted and fixed in position including S & F necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer ,20 mm dia PTMT valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball and 20 mm brass stop cock etc complete all as specified and directed.

M&L for Rotational moulded polyethylene water storage tank 3 layer white colour water tank , non- toxic effect, algea formation protection (made from Virgin grade of polyetylene material which is duly stablized with anti-oxidentPlastic) of capacity 500 litres, (cylindrical vertical one piece moulded with closed top), the internal and external surfaces of tanks are smooth, clean and free from any hidden internal defects, hoisted and fixed in position including S & F necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer ,20 mm dia PTMT valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball and 20 mm brass stop cock etc complete all as specified and directed.

S&F in repairs/new 15mm bore chromium plated cast copper alloy bib taps fancy type long body with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule all complete all as specified and directed ..

S&F in repair brass chromium plated tubular towel rails 20mm dia D type 60cm long between flanges complete all as specified and directed.

S&F in repair Stainless Steel 0.90mm thick sheet. plate rack of size 600mm x 600mm x 250mm complete all as specified and directed

S&F in repair Sink 1.00 mm thick sheet kitchen or labourator with plug washers,and waste pipe, incl bedding in CM to drwaf wall or incl fixing cantilever brackets and conecting union to pipe over all size 495x420mm bowl size 410mm x 330mm x 160mm.complete all as specified and directed.

S&F in repair wash down water closet (Pedestal pattern) white with P or S trap including Flush pipe of polyethylene of low or high density of PVC, 32 mm dia, for low level cistern and plastic water closet seat & cover mild steel chromium plated or aluminised hinging device and connection to low level flushing cistern and flush pipe and CP jet spray, etc complete all as specified and directed. Cera Cat Part No: S1053121 or equivalent in Jaquar/Prayag/Kohler.

S&F flushing cistern with 10 ltrs discharge capacity PVC flushing cistern low level with inlet ball valve etc.complete all as specified and directed .Cera Cat Part No: Congo B1010112 or equivalent in Jaquar/Prayag/Kohler.

S & F in repair Vitreous china wash basin, white, flat back, size 550x400mm excluding pillar tap and including waste fitting chromium plated brass, chromium plated steel chain and rubber plug, porcelain stopper, a pair of CI brackets, waste pipe and excluding pillar tap, fixed in repairs complete all as specified and directed .

S & F in repair Vitreous china wash basin, white, flat back, size 300x300mm excluding pillar tap and including waste fitting chromium plated brass, chromium plated steel chain and rubber plug, porcelain stopper, a pair of CI brackets, waste pipe and excluding pillar tap, fixed in repairs complete all as specified and directed .

S & F in repair Vitreous china Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe), with grating and union for discharge pipe fixed in repairs complete all as specified and directed. Cera Cat Part No: Chrys S4020103 or equivalent in Jaquar/Prayag/Kohler.

S & F in repair Vitreous China squatting pan “Orissa pattern” size 580x440mm white with integral foot rest (excluding flushing cistern and flush pipe) with CI ‘P’ trap of long arm of suitable size including connection to flush pipe, anti symphonic pipes etc, complete all as specified and directed. Cera Cat Part No: COVYNA S3010109 or equivalent in Jaquar/Prayag/Kohler.

S&F of 15mm dia bore steel water GI tubes medium grade with all fittings and fixed cocealed to walls, ceilings or laid in floors complete with and including taking up or down 15mm bore steel water tubing and connections including cutting/chiesling of brick/concrete surface and making good as per existing complete all as specified and directed

S&F of 20mm dia bore steel water GI tubes medium grade with all fittings and fixed cocealed to walls, ceilings or laid in floors complete with and including taking up or down 20mm bore steel water tubing and connections including cutting/chiesling of brick/concrete surface and making good as per existing complete all as specified and directed

S&F curtain rod stainless steel tubular with fixing brackets, stop etc. complete all as specified and as directed.

Demolition cement concrete unreinforced of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Demolition of reinforced cement concrete of any description. complete all as specified and directed.

M&L for 75 mm thick PCC type D-2, 1:4:8 (40mm graded stone aggregate) as in sub base complete all as specified and directed .

M/L roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc and applying cement slurry @ 3kg cement/Sqm complete all as specified and directed.

M&L for screed bed or bedding layer of mortar 15mm thick in cement mortar 1:4 for laying floor finishes complete all as specified and directed.

M&L for 10mm thick rendering/screeding on fair faces of brick / concrete surfaces in cement mortar 1:4 and finished even and fair for receiving tiles complete all as specified and directed .

M&L for Vitrified tiles in dark shade 10mm thick (Square/reactangular) area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed .

M&L for Vitrified tiles in dark shade 10mm thick (Square/reactangular) area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm, in skirting/dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including dismantling floor, hearth or wall tiling and cement mortar bedding (but not backing) and removing rubbish off premises complete all as specified and directed .

M&L for hard core of broken stone or boulder of gauge not exc 63mm deposited, spread, watered and levelled in layers not exc 15cm thick each complete all as specified and directed .

M&L for Premium Quality Durastone / Endura heavy duty vitrified tiles of size 300 mm x 300 mm x 10mm to 12mm thick as in floors and skirting set and jointed in neat cement slurry and pointed in white cement to match the surface complete over screed bed or bedding layer of mortar 15mm thick in cement mortar 1:4 for laying floor finishes complete all as specified and directed .

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L Glazed ceramic tiles in vertical surface 350x250mmx7mm/450X300X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface incl Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L Non Skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 sqm, in floors and skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed ..

M&L Non Skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed ..

M&L Non Skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 but not exceeding 0.38 sqm, in dado/ skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed ..

M&L Machine cut kota slab flooring 18-20mm thickness over cement screed base laid and jointed with gray cement slurry mixed with pigment to matches the shade of the slab including rubbing and polishing,and 20mm thick screed bed or bedding layer of mortar in cm 1:6 for laying floor finishes complete all as specified and directed.

M&L Machine cut kota slab as in skirting/dado etc 20-25mm thickness over cement screed base laid and jointed with gray cement slurry mixed with pigment to matches the shade of the slab including rubbing and polishing,and 10mm thick rendering in cm 1:4 for complete all as specified and directed ..

M&L for rendering 15mm thick in cement mortar 1:6, on fair faces of brick work or concrete surfaces , finished even and smooth without using extra cement, preparation of new plastered surfaces of walls and applying 3mm thick wall care putty and two coat oil emulsion distemper on walls complete all as specified and directed .

M&L for rendering 15mm thick in cement mortar 1:6, on fair faces of brick work or concrete surfaces , finished even and smooth without using extra cement, preparation of new plastered surfaces of walls and applying three coats of white wash on walls complete all as specified and directed .

M&L for Granite black colour of any type 18-20mm thick machine cut as in cooking plateforms and like in cement mortar ( 1:4 ) incl pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and 20mm thick screed bed or bedding layer of mortar in cm 1:6 for laying floor finishes. complete all as specified and directed

Rounding/moulding to edges of stone slabs, marble stone, granite stone slabs one edge, such as in steps, cooding platform , and other similar situations etc. complete all as specified and directed

Cutting openings, through brick walls for door, window and other openings or enlarging existing openings converting window into door opening etc or cutting out defective brick work for under pinning including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus rubbish off material upto distance 50metre complete all as specified and directed

Taking down cement plaster on brick or concrete surface of any description including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:4, on fair faces of brick or concrete surfaces, finished even and smooth without using extra cement, complete all as specified and directed .

M&L for Preparation of new plastered surface and applying two coats of 100% Premium acrylic emulsion paint having VOC less then 50 gm/litre and UV resistence as per IS 15489:2004, Alkali & Fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed .

M&L for Preparation of old plastered surface and applying two coats of 100% Premium acrylic emulsion paint having VOC less then 50 gm/litre and UV resistence as per IS 15489:2004, Alkali & Fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over new surfaces. complete all as specified and directed

S&F chromium plated PTMT shelves fixed with and including chromium plated brass screws and plastic cleats complete all as specified and directed

S&F Fancy type health faucet with 8mm dia 1mtr long flexible tube (back flow preventer), chromium plated of 15mm bore, all as specified and directed. Make:Jaquar cat part No : ALD-579 or Cera cat part No : CG-105A

S&F in repair/new stop valve cast copper alloy chromium plated fancy type screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe. complete all as specified and directed .

S&F stop valve cast copper alloy screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe with long shank chromium plated concealed type complete all as specified and directed .

S&F in repair chromium plated shower roses with or without swivel joints 125mm size including fixing to steel pipe or union complete all as specified and directed.Cat Part No: F7020111AB or equivalent in Jaquar/Prayag/Kohler.

S&F CP Soap dish fancy type complete all as specified and directed .

S&F CP in repair brass CP mixer or mixing hot and cold water for wash hand basin screwed down for iron pipe of 15mm bore complete all as specified and directed .

S&F in position suspended false ceiling system using E-grid suspended ceiling grid system. The size of grid shall be 600x600mm with GI frame work main runner 38x24mm cross tee 25x24mm and wall angle 24mmx24mm using 9mm thick ceiling panel laminated wth PVC film on front face and foil back available in due drop texture as per IS- 2095 Part-I 1996 fixed in the grid of E grid suspended ceiling Grid system duly suspended by 4mm dia GI bar hangers from the purlins of the roof with butter fly clips.including dismantling of existing AC board any thickness complete all as specified and directed.

M&L for concrete bed to drain pipes laid in trenches incl packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8 type D2 (using 40mm graded crushed stone aggregates) for 150mm bore of pipe complete all as specified and directed.

M&L for Reinforced concrete pipes150mm, class NP3, laid and jointed complete with collars bed complete incl testing all as specified (Concrete to be measured and paid for separately) complete all as specified and directed

M&L Cement concrete M-7.5 (Nominal mix),type D-2, 1:4:8, (using 40 mm graded crushed stone aggregates) in foundation filling and mass concrete, post holes etc complete all as specified and directed

Demolition of brickwork built in cement mortar including all quions, arches, pillar complete all as specified and directed

M&L Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius with old size bricks built in cement mortar 1:6 , complete all as specified and directed

M & L Brick work curved on plan exc 6m mean radius with old size bricks built in cement mortar 1:4 for manhole, drain and external pointed flush in same mortar as the work proceeds complete all as specified and directed

M & L for Half thick Brick wall work curved on plan in any radius with old size bricks built in cement mortar 1:4 and external pointed flush in same mortar as the work proceeds. complete all as specified and directed

M&L for Rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or conrete surfaces finishing the surface even and smooth without using extra cement mixed with liquid ater proofing compound @ 3% of cement weight complete all as specified and directed

M&L for Reinforced cement concrete M-20 (Nominal mx) using 20mm graded crushed stone aggregates as in slabs/shelves, supported on walls, beam and columns in floors, and in shelves and the like complete all as specified and directed

M&L Mild steel TMT bars 6 to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed

M & L Precast cement concrete type B-1, 1:2:4 (20mm graded) aggregate as in manhole cover including necessary form work as required complete all as specified and directed

M & L Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified and directed

M&L for Construction of septic tank with cover slab RCC M-25 (Design mix) for "10" users brick work in CM 1:4 (with top of slab at ground level) incl necessary excavation and earth work in any type of soil and disposal of surplus soil as directed including RCC manohole covers with angle iron welded frame complete vent shaft cowl all as shown on drg and specified.Ref Drg no CEPZ/TD/013/13 Sht 1/5 to 5/5

M&L for construction of soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M-25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM 1:4, RCC cover slab in M-25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size,complete of size 1.2 m dia x 3.0 m deep, complete all as specified and as directed. Ref Drg no CEPZ/TD/013/13 Sht 1/5 to 5/5

M&L for Construction of septic tank with cover slab RCC M-25 (Design mix) for "200" users brick work in CM 1:4 (with top of slab at ground level) incl necessary excavation and earth work in any type of soil and disposal of surplus soil as directed including RCC manohole covers with angle iron welded frame complete vent shaft cowl all as shown on drg and specified.Ref Drg no CEPZ/TD/013/13 Sht 1/5 to 5/5

M&L for construction of soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M-25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM 1:4, RCC cover slab in M-25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size,complete of size 3.60 m dia x 3.0 m deep, complete all as specified and as directed. Ref Drg no CEPZ/TD/013/13 Sht 1/5 to 5/5

M&L for Construction of septic tank with cover slab RCC M-25 (Design mix) for "150" users brick work in CM 1:4 (with top of slab at ground level) incl necessary excavation and earth work in any type of soil and disposal of surplus soil as directed including RCC manohole covers with angle iron welded frame complete vent shaft cowl all as shown on drg and specified.Ref Drg no CEPZ/TD/013/13 Sht 1/5 to 5/5

M&L for construction of soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M-25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM 1:4, RCC cover slab in M-25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size,complete of size 2.40 m dia x 3.0 m deep, complete all as specified and as directed. Ref Drg no CEPZ/TD/013/13 Sht 1/5 to 5/5

M&L 75 mm thick PCC, type C-2, 1:3:6, ( using 40mm graded crushed stone aggregate) as in plinth protection finishing the surface even and smooth without nusing extra cement. complete all as specified and directed

M&L for rendering 5 mm thick in CM (1:3) finished surface even and smooth w/o using extra cement in ceiling. and applying three coats of white wash on ceiling complete all as specified and directed

M&L for preperation of old plastered surface and applying two coats of white wash on ceiling complete all as specified and directed

Supply only integral Water Proofing Compound. complete all as specified and directed

M&L for complete removal of existing surfaces of walls and applying 3mm thick wall care putty and two coat oil emulsion distemper on walls complete all as specified and directed .

M&L Terra kota tiling 10mm thick set and jointed with grey cement with pigment and pointed with neat cement slurry in chajjas over 15mm thick screed bed in CM 1:4 over PCC coping 1:3:6 type C-1 (using 20mm graded agg) complete all as specified and directed

Taking down ,dismantling of broken/loose portion of chajja ,facia upto 450 mm wide and making good the surfaces with cement mortar 1:3 or PCC 1:1.5:3 including necessary formwork /scffolding and matching with existing surface of facia (including white wash /colour wash or cement base paint )chajja upto 2nd floor complete all as specified and directed.

Supply,laying and testing cable XLPE insulated,screened,PVC bedded galvanised steel strip or wire armoured,electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 10 Sqmm 4 core including takingout existing complete all as specified and directed..

Supply,laying and testing cable XLPE insulated,screened,PVC bedded galvanised steel strip or wire armoured,electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 35 Sqmm 3.50 core including takingout existing complete all as specified and directed..

Supply,laying and testing cable XLPE insulated,screened,PVC bedded galvanised steel strip or wire armoured,electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 10 Sqmm 2 core including takingout existing complete all as specified and directed..

Supply and fix for DWC high density polythylene pipes having dia 63/50 as per site requirement having corrugation on the wall and plain surface on the wall conforming to IS : 14930 (Part-I & II) for protection of underground cable laid along pole/along wall/in PCC on GL/roof and including all fitting as required complete all as specified and directed.

M&L cutting and screwing existing steel tubing of any size for alteration/additions in position without taking down including insertion of Tee complete all as specified and directed..

Supply and fix gate valve 20mm dia gun metal gate valve conforming to IS with iron wheel head screwed both ends for iron pipe complete all as specified and directed..

Suppy and fix gate valve 25mm dia gun metal gate valve conforming to IS with iron wheel head screwed both ends for iron pipe complete all as specified and directed..

S&F of 25mm dia bore steel water GI tubes medium grade with all fittings and fixed cocealed to walls, ceilings or laid in trenches complete complete all as specified and directed

S&F of 20mm dia bore steel water GI tubes medium grade with all fittings and fixed cocealed to walls, ceilings or laid in trenches complete complete all as specified and directed

S&F of 15mm dia bore steel water GI tubes medium grade with all fittings and fixed cocealed to walls, ceilings or laid in trenches complete complete all as specified and directed

Taking down copper/aluminum point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as per specified and directed.

Point wiring with 1.5 Sqmm FRLS, PVC insulated and unsheathed multi stranded flexible copper conductor cable in and incl rigid PVC conduit concealed medium grade with pressed mild steel terminal boxes(sheet not less than 1.6 mm thick) duly painted with a coat of red oxide primer with suitable thickness plastic laminated sheet cover 3mm thick of adequate size for one light or one fan controlled by one switch incl 1.5 Sqmm FRLS, PVC insulated and unsheathed multi stranded flexible copper conductor cable as earth wire(green colour) to common earth dolly complete all as specified and directed by Engr-in-charge.Note: a) Rate for cutting chases for conduits and sinking for boxes and making good to wall, floors deemed to be included in each point etc (b) On RCC roof ceiling PVC conduit shall be provided on surfaces for any necessary point with proper fixing clips and no extra cost shall be paid for the job etc complete all as per specified and directed.

All as per item No 152 but for one 3 pin 5 Amp socket outlet on independent board complete all as per specified and directed.

All as per item No 152 but for one 3 pin 5 Amp socket outlet on same board complete all as per specified and directed.

Point wiring with 2.5 sqmm FRLS, PVC insulated and unsheathed multi stranded flexible copper conductor cable drawn in and including rigid PVC concealed conduit medium grade of suitable size with sunk cast iron/pressed steel terminal boxes(sheet not less than 1.6mm thick) of adequate size with suitable thickness plastic laminated sheet cover 3mm thick for one 3 pin socket outlet 15 Amp on independent board including continuous 2.5 sqmm FRLS,PVC insulated and unsheathed copper conductor cable (multistranded) as earth wire to common earth dolly, complete all as per specified and directed.

Point wiring with 1.5 Sqmm FRLS, PVC insulated and unsheathed multi stranded flexible copper conductor cable in existing rigid PVC conduit concealed medium grade with pressed mild steel terminal boxes(sheet not less than 1.6 mm thick) duly painted with a coat of red oxide primer with suitable thickness plastic laminated sheet cover 3mm thick of adequate size for one light or one fan controlled by one switch incl 1.5 Sqmm FRLS, PVC insulated and unsheathed multi stranded flexible copper conductor cable as earth wire(green colour) to common earth dolly complete all as specified and directed by Engr-in-charge.

All as per item No 156 but for one 3 pin 5 Amp socket outlet on independent board complete all as per specified and directed.

All as per item No 156 but for one 3 pin 5 Amp socket outlet on same board complete all as per specified and directed.

All as per item No 156 but for one bell/buzzers point controlledby one push button on the same board with other inner switches or independent with cable 1.5sqmm size complete all as per specified and directed.

Point wiring with 2.5 sqmm FRLS, PVC insulated and unsheathed multi stranded flexible copper conductor cable drawn in existing conduit medium grade of suitable size with sunk cast iron/pressed steel terminal boxes(sheet not less than 1.6mm thick) of adequate size with suitable thickness plastic laminated sheet cover 3mm thick for one 3 pin socket outlet 15 Amp on independent board including continuous 2.5 sqmm FRLS,PVC insulated and unsheathed copper conductor cable (multistranded) as earth wire to common earth dolly, complete all as per specified and directed.

Supplying & Fixing switch piano flush button single pole one way 5 amps 230 volts, complete all as per specified and directed.

Supplying & Fixing fan regulator electronic flush type stepped (rotary type) with 5 steps speed control complete all as per specified and directed.

Supplying & Fixing electric bell ding dong AC single phase 220 volts, complete all as per specified and directed.

Supplying & Fixing Switch Bell push, flush type, 5 amp one way, complete all as per specified and directed.

Supplying & Fixing socket out let, 5 pin, 5 amps, 230 volts, complete all as per specified and directed.

Supplying & Fixing switch socket combination 2 in 1, 5 pin, 5 amps, 230 volts,flush type complete all as per specified and directed.

Supplying & Fixing switch socket combination 2 in 1, 6 pin, 5 and 15 amps, 230 volts,flush type complete all as per specified and directed.

S&F Lamp holder, PVC/Polycarbonate type with back plate having matching colour to holder suitable for angle/batten fittings complete all as per specified and directed.

S&F ceiling rose surface bake lite two to three terminal isolated body fixed on PVC round block complete all as per specified and directed.

S&F 25 Watt LED street light/Bldg security light fitting of IP-66 protection, pressure die cast aluminum housing with epoxy powder coated finish having polycarbonate cover with all accessories pre-wired with and including medium grade GI pipe 40mm dia for bracket for fixing on pole/wall connecting with three core conductor cable of size 1.00 sqmm complete all as per specified and directed.

S&F Wall mounted LED batten extruded aluminium heat shrink provided for efficient heat dissipation and integrated electronic driver, 20 Watt LED fitting with 100 lumen/watt 6000k, 230Volts, diffused optics etc complete with all accessories, connecting up with twin core twisted flexible copper conductor cable from ceiling rose to fitting, fixed on two PVC round block and testing complete all as per specified and directed.

Supply and fixing ceiling fan with blade, down rod, with electronic regulator and accessories, 230 Volt, 1200mm sweep,with service value 6.00 BEE, five star rated complete all as specified and directed..

Supply and fixing Exhaust fan 300mm sweep,steel body with all accessories complete all as specified and directed..

Supply and fixing wall mounted bulk head fitting, 10watt, warm white, 230volt, diffused optics etc complete with all accessories, connecting up with three core twisted flexible copper conductor from ceiling rose to fitting complete all as per specified and directed.

S&F in replacement sheet metal powder enclosure powder coated versatile double door single pole and neutral (SPN) 8 way fitted with copper bus bar rated 200 Amp (SPN) distribution board for MCB provisions 230Volt, 50Hz AC with neutral link , earth bar complete all as per specified and directed.

S&F in replacement sheet metal powder enclosure powder coated versatile double door single pole and neutral (SPN) 4 way fitted with copper bus bar rated 200 Amp (SPN) distribution board for MCB provisions 230Volt, 50Hz AC with neutral link , earth bar complete all as per specified and directed.

S&F in replacement double door TPN vertical loadline DBs are fitted with bus bar, neutral links, blanking plate with MCCB four pole 63Amp, 25KA, 415Volts supply having protection IP-43 with GI frame fitting on wall with anchor, fastener and connect all electrical connections complete all as per specified and directed.

S&F MCB SPN 6-32 Amps with 10KA breaking capacity of c series in distribution board complete all as per specified and directed.

S&F MCB SP 6-32 Amps with 10KA breaking capacity of c series in distribution board complete all as per specified and directed.

S&F LED bulb of capacity 7 watt complete all as per specified and directed.

S&F Water heater storage type with multifunctional safety valve, electric operated 230 Volt, single phase complete one No of 2 KW heating element,steel body, inner copper body automatic, thermal cut out, fussible plug, anti vaccum sys, built in pressure release valve, thermostat,, indicator lamps of capacity 25 Litres five star rating including brackets, nut & bolts complete all as per specified and directed.

S&F in Replacement of existing sub main wiring with two run of single core (FRLS) PVC insulated and unsheathed cable with copper conductor (Multi strand) having nominal area 4.0 Sqmm drawing into and including PVC non metallic rigid conduit of adequate size and making electric connections including one run (FRLS) PVC insulated single core copper conductor cable 4.0 Sqmm as a earth continuity conductor(green colour) in and including in non metallic rigid PVC conduit, including cutting chases in brick wall, replastering and making good to match the existing specifications complete all as per specified and directed. Note :- (i) Rates are deemed to be included chases of conduit and sinking for boxes cutting and making holes in wall/floor for passing in or through conduit (ii) Two run of 4.00 sqmm single core (FRLS) PVC insulated copper conductor cable one run of 4.0 sqmm copper conductor cable (FRLS) as a earth lead and one run of PVC conduit of suitable size will be measured as a one unit.

M&L for Earthing complete with galvanized steel earth plate electrode 600x600x6mm thick buried directly in ground (Earth pit not less than 2.25 Metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level, connected to galvanized earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No.5 of SSR Part-I (2009) including filling of charcoal dust , common salt all around Earth plate upto 150mm, 20mm bore GI medium grade watering pipe, 15 mm bore light grade earth lead protection pipe upto main board, funnel with wiremesh, 40mm thick RCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregate reinforced with suitable handle and angle iron frame and necessary excavation and earth work in any type of soil etc. complete all as specified and as directed including testing on completion. (Note: The rate quoted include cost of min 7.5 metre earthling wire .)

Amrik Construction co (BID ID -3081474)

G.M. ENGINEERING SERVICES (BID ID -3104657)

ADVAIT CONSTRUCTION CO (BID ID -3091179)

SIDDAHANT ENTERPRISES (BID ID -3122929)

Standard engineers (BID ID -3110244)

M/S S KUMAR & CO (BID ID -3123920)