REPAIRS REPLACEMENT OF INTERNAL WIRING FITTING FIXTURES AT CDM ADM OFFICERS MD ACCN AREA UNDER AGE EM N OF GE N SECUNDERABAD

Amount

Taking down existing unserviceable point wiring of any description/type/ size of light/fan/power/two way/bell etc on TW batten/conduit including removal of batten / conduit / gutties / wooden boards / switches / sockets / regulators/ light fittings etc and removal of unserviceable material out off site area and making good the disturbed surfaces of wall/ceiling so as to match with the existing finishes complete all as specified & as directed.

Disconnecting and removing the MCB DBs from any height ,stripping out the fitting for examine replacement of unserviceable spare parts, reassembling, refixing in original position including minor repairs for the smooth functioning and testing complete all as specified & as directed.

Material and labour for point wiring complete with stranded copper conductor 1.5 Sqmm (nominal area) PVC insulated unsheathed cable up to 1100 V grade FRLS conforming to IS - 694 multistranded drawn through and including rigid 20mm dia PVC medium grade conduit and conduit accessories duly ISI marked on surface etc., with new sunk type pressed steel terminal boxes suitable for MODULAR switches including fixing/grouting sunken/ surface as per site requirement covered with suitable modular white cover plate for suitable size for mounting of MODULAR switches, regulators and drawing continuous earth wire with one run of 1.5 Sqmm (nominal area) PVC insulated unsheathed cable up to 1100 V grade FRLS conforming to IS - 694 multistranded copper conductor as earth wire and connecting to common earth dolly and making good the disturbed wall surfaces to match with the existing surfaces complete all as specified and as directed. for the following :- (a) One light / bell point controlled by one, one way switch 5 amps, single pole.

All as per Sl item No 3 here in before, but for One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board complete all as specified & as directed.

All as per Sl item No 3 here in before, but for One 3 pin 5 Amps switch socket outlet point controlled by one switch on the same board complete all as specified & as directed.

All as per Sl item No. 3 here in before, but for using 2.5 Sqmm single core copper conductor cable of multistranded PVC insulated sheathed FRLS 1100 Volts grade for 3 Pin 15 Amps switch socket combination point on independent board including running of 2.5 Sq mm FRLS copper conductor PVC insulated cable as earth continuity conductor complete all as specified & as directed.

All as per Sl item No. 3 here in before, but for using 4 Sqmm single core copper conductor cable of multistranded PVC insulated sheathed FRLS 1100 Volts grade for AC Box including running of 4 Sq mm FRLS copper conductor PVC insulated cable as earth continuity conductor complete all as specified & as directed.

All as per Sl item No. 3 here in before, but for wiring drawn through PVC Casing and Capping, but for One light/fan/Bell point controlled by one, one way switch 5 amps, SP complete all as specified & as directed.

All as per Sl item No. 8 here in before, but for One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board complete all as specified & as directed.

All as per Sl item No. 8 here in before, but for One 3 pin 5 Amps switch socket outlet point controlled by one switch on the same board complete all as specified & as directed.

All as per Sl item No. 8 here in before, but for using 2.5 Sqmm single core copper conductor cable of multistranded PVC insulated sheathed FRLS 1100 Volts grade for 3 Pin 15 Amps switch socket combination point on independent board including running of 2.5 Sq mm FRLS copper conductor PVC insulated cable as earth continuity conductor complete all as specified & as directed.

S & F switch piano single pole Modular switch 1 way 10 Amps, 1 Module complete all as specified & as directed.

S & F switch piano single pole Modular switch 1 way 16 Amps, 1 Module complete all as specified & as directed.

S&F Modular Bell Push 10A, 1 Module complete all as specified & as directed.

Supply and fix socket outlet modular type multipurpose 2/3 Pin, 6 amps, 230 volts combined 2 Module complete all as specified & as directed.

Supply and fix socket outlet modular type multipurpose 2/3 Pin, 6/16 amps, 230 volts combined 2 Module complete all as specified & as directed.

S & F Modular ceiling fan regulator stepped type heavy duty suitable to work on 230 volts 2 Module complete all as specified & as directed.

M & L for Point wiring with 1.5 Sq mm copper conductor single core PVC insulated FRLS 1100 Volts multistranded drawn through and including 20mm dia rigid PVC conduit surface and conduit accessories medium grade and existing pressed steel terminal boxes including fixing/grouting sunken/ surface as per site requirement covered with suitable laminated sheet for fixing switches / sockets/ regulators etc including running up of 1.5 Sq mm FRLS copper conductor PVC insulated cable as earth continuity conductor along with wiring and connecting to the common earth dolly all as specified for One light/fan/bell point controlled by one, one way switch 5 amps, SP complete all as specified & as directed. Note: Cutting/chases will be measured and paid seperately.

All as per Sl item No 18 here in before, but for One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board complete all as specified & as directed.

All as per Sl item No 18 here in before, but for One 3 pin 5 Amps switch socket outlet point controlled by one switch on the same board complete all as specified & as directed.

All as per Sl item No. 18 here in before, but for using 2.5 Sqmm single core copper conductor cable of multistranded PVC insulated sheathed FRLS 1100 Volts grade for 3 Pin 15 Amps switch socket combination point on independent board including running of 2.5 Sq mm FRLS copper conductor PVC insulated cable as earth continuity conductor complete all as specified & as directed.

S & F switch piano single pole flush type 5 amps, 230 volts complete all as specified & as directed.

S&F bell push 5 A flush type complete all as specified & as directed.

Supply and fix socket outlet flush type multipurpose 2 in 1, 3 Pin, 5 amps, 230 volts complete all as specified & as directed.

S & F switch socket combination flush type multipurpose 2/3 pin 5 amps 2 in 1 230 Volts complete all as specified & as directed.

S & F switch socket combination 2 in 1 multipurpose 3/5 pin 5/15 amps flush type complete all as specified & as directed.

S & F ceiling rose three terminal surface bakelite type AC 50 Hz 230 volts of size 65 x 50 mm complete all as specified & as directed.

S & F electronic type regulator stepped heavy duty for ceiling fan suitable to work on 230 volts complete all as specified & as directed.

S&F bell ding dong working on 230 volts AC Supply complete all as specified & as directed.

S & F lamp holder insulated body surface bakelite with back plate suitable for angle / batten fittings complete all as specified & as directed.

S & F in replacement Fancy type lights (Round Type) of 22 watts including LED lamp complete with all accessories complete all as specified & as directed. Make: Halonix ModelHLDLS-R06-22-CW/ or Havells ENDURANEOHESURFACEDLS21WLED857S or C&S CANOPUS-CS-SERIES OF Cat part No LTCRSUR22LEDRND/W

S & F in replacement Recess mounting indirect with perforated sheet & electronic DRIVER luminaire 36 watts LED soft line new with central opaldiffuser series including all accessories and Lamp, . all as specified and as directed . Note: Cutting of False ceiling and removal of old fitting and re-arranging the False ceiling with existing size, Gypsum board/POP false ceiling is to be done if required. Cost of False ceiling work is inclusive of rate quoted complete all as specified & as directed. Make :HALONIX Model No HLFPU22-02-36-CW-R or Havells Model Endura Slim Pro plus 2x2 PLR 36 WLED 857 MOD OR PHILIPS Model FULLGLOW Cat No RC 380 HE

S & F of False ceiling fitting Iron Ring suitable for POP/GYPSUM False ceiling and suitable for above mentioned recess mounting light complete all as specified & as directed.

S & F in replacement of wall mounted LED batten of 10 watt with LED Lamp, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver and connecting to all accessories from ceiling rose to fitting complete all as specified & as directed. Make: HALONIX Model HLB-03-10-CW-AL or Havells Model LUMILINEPLUSBS10WLED865SPCSS or Wipro Cat No. LL20-111-XXX-65NE3

S & F in replacement of wall mounted box type LED batten suitable for 20 watts with LED tube 20 watts lamp along with integrated driver and connecting to all accessories from ceiling rose to fitting complete all as specified & as directed. Make:HALONIX Model HLIB-05-118 LED-1S & Tube rod Cat No HLTD-04-20-CW-PC or Havells Regal Batten T8UPTO1X22WDSBSWH & Tube rod Cat No PHOTONULTRA2.01213T8SSTL20WLED865SPC, Wipro cat No WI0921208 incl Tube Rod LL13-181-65SE.

S & F in replacement of LED security Light luminaire 25 watts with deep drawn housing including all accessories and Lamp, with suitable pipe bracket 25 mm dia 0.60 Mtr length fixed on wall with suitable flat iron clamps and nut bolts complete all as specified & as directed. Make .HALONIX Model HLSLD-09-25-CWL-R Havells CAt No - ENDURAPEARLSL25WLED757SASYTOPCMP, Wipro Cat No LLR06-311-XXX-57-XX as approved by GE

S & F in replacement of wall mounted batten type LED light with co extruded polycarbonate body suitable for 20w LED lamp along with integrated driver complete and connecting to the point wiring with necessary flexible copper conductor of multistrand three core of suitable length from fitting to the ceiling rose complete all as specified & as directed. Make: HALONIX Model HLB-03-20-CW-AL or Havells Cat part No LUMILINE PLUSBS20WLED865SPCSS or Crompton LL20-221-XXX65NE3

S & F in replacement of recessed mounted LED of 1x6watts spot light focused beam with COB complete all as specified & as directed. Make: HALONIX Model HLDLR-R25-06-CW/Havells cat part No LHEEGEPB1E1W006 or Philips/Wipro Model GLITZ of Cat Part No LD98-900-024--40-06

S & F in replacement of 10watt bulk head luminaire suitable for outdoor with high brightness giving glare free light complete all as specified & as directed. Make: HALONIX Model HLBH-02-10-CW or Havells RUGBYNEONFT10WLED860SSYMTOPC / WIPRO Model Bulkhead of Cat Part No LW07-141-10W-57

S & F in replacement of LED down lighter (round) 12 watts including LED 12 watts lamp complete with all accessories complete all as specified & as directed. MAKE: HALONIX Model HLDLR-31-12-CW/ Havells Cat part No EDGEPRORDDLR12WLED857S/ WIPRO Model HELIX of Cat Part No LD91--201-15-57

S & F in replacement of Decorative wall mounted fixture of 09 watts LED including LED 09 watts lamp complete with all accessories complete all as specified & as directed. MAKE: HALONIX Model HLWB-01-B22 / Havells Cat part No LHFOECE1TZ10014 or equivalent in Philips /Wipro

S & F in replacement of 2x1 recess mounted LED 28 Watts flat panel along with driver and with high brightness LED for glare free homogeneous illumination suitable for POP false ceilng/GRID Ceiling with all accessories complete all as specified & as directed. MAKE: HALONIX Model HLFPR12-27-28-CW / Havells Model PLUTO 2x1 Cat part No PLUTO2X1PLR28WLED857S or C&S CYGNUS Cat No LTCRP28WATT1X2

S & F in replacement of 4x1 Recess/Surface mounted LED luminarie of 36 watts with soft light along with driver and glare free symmetrical illumination suitable for armstrong and Grid ceiling complete with all accessories complete all as specified & as directed. MAKE: HALONIX Model HLFPR14-06-36-CW / Havells Model VENUS NEO Cat part No VENUSNEOHE4X1PLR28-36WLED857MOD AND LED DRIVER36V36WS / C&S Cat Part NoLTCRP36WLED1X4

S & F in replacement of MCB SP 6 to 32 Amps 240 volts for fixing on MCB DB's complete all as specified & as directed. Make : Havells - Cat No DHMGCSPF006-032, Standard Cat No - DSMGCSPF006-032, C&S Cat No - CSMBS1C6-32.

S & F in replacement of MCB SPN 40 Amps 240 volts for fixing on MCB DB's complete all as specified & as directed. Make : Havells Cat No DHMGCSNF040, Standard Cat No - DSMGCNF040, C&S Cat No - CSMBS1C40N.

S & F in replacement of MCB Four pole, 415 volts suitable for fixing on MCB DB of capacity 63 Amps complete all as specified & as directed. Make - Havells Cat No - DHMZCTNF063, Standard Cat No - DSMGCTNF063, C&S Cat No - CSMBS3C63N.

S & F sheet metal enclosure MCB DB SPN 4 way with 200 amps rated bus bar 240 volts double door with locking system complete all as specified & as directed. Make : Havells - CAT Part No DHDPSHODRWO4, Standard Cat No - DSDCSHODOW04, C&S Cat No - CSDBSPNPDD04.

All as per Sl item No 38 here in before, but SPN 8 way DB complete all as specified & as directed. Make : Havells - CAT Part No DHDPSHODRWO8, Standard Cat No - DSDCSHODOW08, C&S Cat No - CSDBSPNPDD08.

S & F in replacement of Horizontal type TPN DB 4 way double door made out of CRCA sheet housing with powder coating & confirming to IS 13032, IS 8623, BS 5486 accomdated suitably in a MS enclosure weather proof made out of 3 mm thick MS sheet having hinged and robust locking arrangement including painting by red-oxide one coat and powder coated complete all as specified & as directed. Make : Havells - CAT Part No DHDNTHODAW04, Standard Cat No - DSDNTSODAW04, C&S Cat No - CSDBTPNPDD04.

S & F Modular Single pole and Neutral enclosure with a two pin and earth plug and socket metal clad complete with one singlepole MCB 25 Amps (AC Box) complete all as specified & as directed. Make : Havells - CAT Part No DHDMCSN0251025, Standard Cat No - DSDMCSN0251025, C&S Cat No - CSDBMACBOX025

M & L Submain wiring with 2 runs of single core 4 sqmm PVC insulated sheated multistranded FRLS 1100 volts grade with copper conductor drawn through non-metalic rigid PVC conduit and conduit accessories of medium grade not not less than 25mm dia including one run of single core 4 sqmm PVC insulated sheated multistranded 1100 volts grade with copper conductor cable as earth continuty conductor along with the wiring and connected from DB to DB/main board including removing the existing unserviceable submain riwing complete all as specified and as directed. Note: 3 runs of 4 Square mm cable and 1 run of PVC conduit with accessories shall be measured as 1 unit of running metre

All as per Sl item No 51, but 2runs of single core 6 sqmm and one run of single core 6 sqmm as earth continuty conductor complete all as specified & as directed. Note: 3 runs of 6 Square mm cable and 1 run of PVC conduit with accessories shall be measured as 1 unit of running metre

M & L for Submain wiring with four single core 10 Sq mm PVC insulated unsheathed copper conductor multistranded 1100 Volts grade drawn through existing non metallic PVC conduit and conduit accessories of suitable dia medium grade including running up of one runs of 10 Sq mm copper conductor multistranded PVC insulated cable as earth continuity conductor along the wiring and connected to the common earth dolly complete including removing the existing unserviceable sub main wiring and making good the disturbed surface to match with the existing complete all as specified & as directed. Note: 5 runs of 10 Square mm cable and 1 run of PVC conduit with accessories shall be measured as 1 unit of running metre

All as per Sl item No 53, but 4runs of single core 6 sqmm and one run of single core 6 sqmm as earth continuty conductor complete all as specified & as directed. Note: 5 runs of 6 Square mm cable and 1 run of PVC conduit with accessories shall be measured as 1 unit of running metre

M & L Submain wiring with 2 runs of single core 4 sqmm PVC insulated sheated multistranded FRLS 1100 volts grade with copper conductor drawn through existing non-metalic rigid PVC conduit and conduit accessories of medium grade not less than 25mm dia including one run of single core 4 sqmm PVC insulated sheated multistranded 1100 volts grade with copper conductor cable as earth continuty conductor along with the wiring and connected from DB to DB/main board including removing the existing unserviceable submain riwing complete all as specified and as directed. Note: 3 runs of 4 Square mm cable and 1 run of PVC conduit with accessories shall be measured as 1 unit of running metre

All as per Sl item No 55, but 2runs of single core 6 sqmm and one run of single core 6 sqmm as earth continuty conductor complete all as specified & as directed. Note: 3 runs of 6 Square mm cable and 1 run of PVC conduit with accessories shall be measured as 1 unit of running metre

Material and labour for earthing with galvanized mild steel earth plate electrode 60 centimetre x 60 centimetre x 6 mm thick buried directly in ground vertically to a depth not less than 2.25 metres below ground level, the top edge of the earth plate at a depth of not less than 1.5 metres below ground level connected to galvanized iron earth wire of 4 mm dia by means of bolts, nuts and washers made out of GI / steel earth wire protected by GI light grade pipe 15 mm bore, 20mm dia light grade galvanised iron pipe with funnel wire mesh for watering and connecting to main switch board / control board all as shown in electrical plate of SSR Pt - I connected to earthing test point and testing on completion including dismatling old unserviceable earthing complete all as specified and as directed. NOTE: The unit rate shall also include for excavation, earth work in hard/dense soil, plain cement concrete 1:3:6 type C1 by using 20 mm graded aggregate in pit, 50 mm thick reinforced cement concrete 1:2:4 type B1 using 20 mm graded aggregate cover duly reinforced with 8 mm dia TMT bars @ 100mm centre to centre both ways, CI cover with CI frame hinges, galvanised iron funnel with watering pipe, wire mesh, complete.

Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earting etc as required 4mm dia galvanised iron or steel wire complete all as specified & as directed.

M&L for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exceeding 10 cm girth complete all as specified & as directed.

Supply & Replace switch piano single pole flush type 5 amps, 230 volts complete all as specified & as directed.

Supply & Replace switch piano single pole Modular switch 1 way 10 Amps, 1 Module complete all as specified & as directed.

Supply & Replace switch piano single pole Modular switch 1 way 16 Amps, 1 Module complete all as specified & as directed.

Supply & Replace bell push 5 A flush type complete all as specified & as directed.

Supply & Replace Modular Bell Push 6A, 1 Module complete all as specified & as directed.

Supply and Replace socket outlet modular type multipurpose 2/3 Pin, 10 amps, 230 volts combined 2 Module complete all as specified & as directed.

Supply and Replace socket outlet modular type multipurpose 2/3 Pin, 6/16 amps, 230 volts combined 2 Module complete all as specified & as directed.

Supply and Replace socket outlet flush type multipurpose 2 in 1, 3 Pin, 5 amps, 230 volts complete all as specified & as directed.

Supply and Replace socket outlet flush type multipurpose 2 in 1, 3 Pin, 5/15 amps, 230 volts complete all as specified & as directed.

Supply and Replace Switch socket combination flush type 6 & 16 Amp multipurpose 3/5 pin with Neon fuse and indicator lamp complete all as specified and as directed

Supply & Replace switch socket combination flush type multipurpose 2/3 pin 5 amps 2 in 1 230 Volts complete all as specified & as directed.

Supply & Replace switch socket combination 2 in 1 multipurpose 3/5 pin 5/15 amps flush typewith complete all as specified & as directed.

Supply & Replace Modular ceiling fan regulator stepped type heavy duty suitable to work on 230 volts, 2 Module complete all as specified & as directed.

Supply & Replace electronic type regulator Switch type stepped for ceiling fan suitable to work on 230 volts complete all as specified & as directed.

Supply & Replace electronic type regulator Socket type stepped for ceiling fan suitable to work on 230 volts complete all as specified & as directed.

Supply & Replace bell ding dong working on 230 volts AC Supply complete all as specified & as directed.

Supply & Replace lamp holder insulated body surface bakelite with back plate suitable for angle / batten fittings complete all as specified & as directed.

M & L bracket made out of GI pipe 25 mm dia bore not less than 1.2 mtr long and fixed on walls with 2 nos MS clamps made out of MS flat 40x5mm thick complete with MS nuts, bolts and washers etc bent to required shape complete all as specified & as directed.

Supply & replace MCB SP 6 to 32 Amps 240 volts for fixing on MCB DB's complete all as specified & as directed. Make : Havells - Cat No DHMGCSPF006-032, Standard Cat No - DSMGCSPF006-032, C&S Cat No - CSMBS1C6-32.

Supply & replace MCB SPN 40 Amps 240 volts for fixing on MCB DB's complete all as specified & as directed. Make : Havells Cat No DHMGCSNF040, Standard Cat No - DSMGCNF040, C&S Cat No - CSMBS1C40N.

Supply & replace MCB Three pole, 415 volts suitable for fixing on MCB DB of capacity 63 Amps complete all as specified & as directed. Make - Havells Cat No - DHMGDTPF063, Standard Cat No - DSMGDTPF063, C&S Cat No - CSMBS3D63.

Supply & replace MCB Four pole, 415 volts suitable for fixing on MCB DB of capacity 63 Amps complete all as specified & as directed. Make - Havells Cat No - DHMZCTNF063, Standard Cat No - DSMGCTNF063, C&S Cat No - CSMBS3C63N.

Supply & Replace MCCBs 415V,10KA, 63/100 amps 3 Pole suitable for DB including removing the existing unserviceable one and making good the distrubed surface to match with the existing surface complete all as specified & as directed. Make: Standard Cat part No ISLGST0063/100 or Indoasian cat part No 830706 or Havells cat part No IHLGHT0063/100

Supply & Replace MCCBs 415V,10KA, 125/160 amps 3 Pole suitable for DB including removing the existing unserviceable one and making good the distrubed surface to match with the existing surface complete all as specified & as directed. Make: Standard Cat part No ISLFNT0125/0160 or Indoasian cat part No 830709 or Havells cat part No IHLFNT0125/0160

Supply and replace Electronic Driver for LED Light of 20 to 40 watts as per sample provided complete all as specified & as directed.

Supply and replace retrofit holder suitable for 2/4 Pin for 9 to 36 Watts bulbs complete all as specified & as directed.

Supply replace Ultra bright LED polycarbonate tube light 20 watt with very high efficiency suited for installation in existing T8 fitting with G13 lamp holders (single side connecion) complete all as specified and directed. Make:HALONIX Tube rod Cat No HLTD-04-20-CW-PC or Havells Cat No PHOTONULTRA2.01213T8SSTL20WLED865SPC, Wipro cat No LL13-181-65SE.

Supply and replace Plug top 5 Amps 3 pin 250 Volts complete all as specified & as directed.

Supply and replace Plug top 15 Amps 3 pin 250 Volts complete all as specified & as directed.

Supply and replace LED 18 watts retrofit bulb suitabe for 2x36 watt CFL fitting complete all as specified & as directed.

Supply and replace PVC Round blocks of suitable size complete all as specified & as directed.

Supply and replace PVC Dummy sheets circular type of 4" complete all as specified & as directed.

Supply and replace PVC Dummy sheets circular type of 6" complete all as specified & as directed.

Supply and replace Rigid PVC casing & capping 20mm wide complete all as specified & as directed.

Supply and replace PVC rectangular box (Gang box) with 5 Amps switch socket complete all as specified & as directed.

Supply and replace PVC rectangular box (Gang box) with 5/15 Amps switch socket complete all as specified & as directed.

Supply and replace PVC wire of Flexible cord with copper conductor multistanded of twin core 23/0.198 complete all as specified & as directed.

Supply and replace PVC copper wire of 1.5 sq mm single core multistranded complete all as specified & as directed.

Supply and replace PVC copper wire of 2.5 sq mm single core multistranded complete all as specified & as directed.

Supply and replace PVC copper wire of 4 sq mm single core multistranded complete all as specified & as directed.

Supply and replace PVC copper wire of 6 sq mm single core multistranded complete all as specified & as directed.

Supply and replace Service wire twin core of 10.0 sq mm aluminium type flat unarmoured complete all as specified & as directed.

Taking down ceiling fans 48”/56” sweep or Exhaust fans upto 300mm, removing/cleaning of dust properly cleaning, greasing & overhualing of bearings including refixing in same location and connecting up complete all as specified & as directed. Note : Replacement of defective/worn out parts will be measured & paid for separately

Supply & replace 2.00/2.50 Mfd capacitor complete all as specified & as directed.

Supply & replace 3.15/4.00 Mfd capacitor complete all as specified & as directed.

Supply & replace ball bearing/Gun Metal Bush of exsiting ceiling fans on site complete all as specified & as directed.

Supply & replace Flexible copper three core of size 23/0076” wire/cable complete all as specified & as directed.

Supply & replace ‘U’ clamps complete with nut, bolts & split pins Heavy duty, suitable for existing ceiling fan fixing on site complete all as specified & as directed.

Supply & replace M.S. rod for ceiling fans 3 ft long with both end suitable size holes and cut mark complete all as specified & as directed.

Supply & replace Nut & bolts with washers for fan blades fixing of ceiling fan of any make/size/type as per site requirement ( 6 Nos for each set), suitable for existing ceiling fan fixing on site complete all as specified & as directed.

Material and labour for Rewinding of burnt Ceiling fan motor of size 48"/56" sweep with super enameled copper wire of suitable size as per details given below of any make, type, model incl transporation complete all as specified & as directed.

All as per Item No 110 above but for exhaust fan motor of sweep upto 300mm complete all as specified & as directed.

Material and labour for Painting of ceiling fans 48”/56” size complete at site, with super synthetic enamel paint by spraying incl filling cavities with filler, one coat after cleaning all dust etc complete all as specified & as directed.

Taking down the geysers of capacity 25/35 from its mounting position by removing all water and electric connections and de-assembling the geyser and carrying out the following works:- (a) Descaling, cleaning the inner tank thoroughly and there should not be any bad taste of water. (b) Examining the water tightness of storage tank after cleaning. (c) Examining the physical condition of thermostat, base assembly fusible plug and outer tank for its serviceability. (d) Inspection of pilot lamps. (e) Reassembling the geyser parts and testing including checking all electrical system (ensuring there is no current leakage) and also conducting hydraulic testing. (f) Re-fixing the Geyser and making electric connections, inlet and outlet water connections and testing and checking of all water inlet, outlet valves connected with geysers. Note : Defective /worn outparts if required shall be measured and paid separetely under relevant items in this schedule.

All as per item No 113 here-in-before but 50 liters capacity complete all as specified & as directed.

Supply and fix rubber PVC connection of 2 feet complete all as specified & as directed.

Supply & fix rubber PVC connection of 3 feet complete all as specified & as directed.

Supply & fix MS base plate cup any type with screws of suitable size as per requirement complete all as specified & as directed.

Supply & fix heating element of the 1.5/2 KW rating as required at site including rubber washers of any make and type complete all as specified & as directed.

Supply & fix Steel inner tank of 25 litre capacity geyser tank by made out of steel sheets appropriate thickness complete all as specified & as directed.

Supply & fix Steel inner tank of 50 litre capacity geyser tank by made out of copper sheets appropriate thickness complete all as specified & as directed.

Supply & fix thermostat for the geysers of the 25 to 35 Liters capacities complete all as specified & as directed.

Supply & fix thermostat for the geysers of the 50 Liters capacities complete all as specified & as directed.

Supply & Replace Air Release Valve of existing size complete all as specified & as directed.

Supply and Replace Indication lamp of existing size/Model (Set of Two) Red & Green complete all as specified & as directed.

S&F in replacement of 1100 Volt grade cable flexible 3 core PVC insulated PVC sheathed with stranded copper conductor of size 2.5 sqmm complete all as specified & as directed.

S&F in replacement of metallic louvers mounted suitable for exhaust fan of 300 to 450 mm on wall complete all as specified & as directed.

S&F in replacement of plastic body including louvers 200 to 300 mm size fan complete all as specified & as directed.

S&F in replacement of motor of plastic body exhaust fan 300mm size complete all as specified & as directed.

M/S P UDAY RAJ CONSTRUCTION