SPECIAL REPAIR TO UG LT CABLE OF PERIMETER SECURITY LIGHTS UNDER GE (AF) LOHEGAON AT AF STN PUNE

Amount

Supply, laying & testing LT 1100 volts grade UG XLPE insulated armoured multistranded aluminium conductor cable of size 35 Sqm 3.5 Core in trenches/ fixing to wall/pole or passing through pipe, including cable glands, lugs, saddles, spacrrs, screws etc al as directed Note - Excavation shall be done manually by deploying manpower

Supply, laying & testing LT 1100 volts grade UG XLPE insulated armoured multistranded aluminium conductor cable of size 25 Sqm 3.5 Core in trenches/ fixing to wall/pole or passing through pipe, including cable glands, lugs, saddles, spacrrs, screws etc al as directed Note - Excavation shall be done manually by deploying manpower

Supply, laying & testing LT 1100 volts grade UG XLPE insulated armoured multistranded aluminium conductor cable of size 16 Sqm 4 Core in trenches/ fixing to wall/pole or passing through pipe, including cable glands, lugs, saddles, spacrrs, screws etc al as directed Note - Excavation shall be done manually by deploying manpower

Supply, laying & testing LT 1100 volts grade UG XLPE insulated armoured multistranded aluminium conductor cable of size 10 Sqm 4 Core in trenches/ fixing to wall/pole or passing through pipe, including cable glands, lugs, saddles, spacrrs, screws etc al as directed Note - Excavation shall be done manually by deploying manpower

Taking out carefully unserviceable cable up to 50 Sqmm, 3.5 Core from trenches/along pole/walls and keeping in safe custody for issue under schedule of credit.

M&L earthing complete with galvanised steel earth plate eletrode 60 cm x 60 cm and 6mm thick buried directly in ground earth pit not less than 2.25mtr deep below normal ground level with top prjgc, of the plate not less than 1.5m below normal ground level, connected to the Galvanise Iron earth lead 32 mm x 6 mm (GI Strip) size, by means of bolts, nuts, check buts and washers of galvanised iron and 32 mm x 6 mm earth lead protected by provision of GI medium grade pipe 40 mm bore including provision of aggregates with 40 mm thick cover of RCC (1:2:4) , reinforced with XPM (weight not less than 4 kg per sqmm) and frame of angle iron 40mmx40mmx3mm and with 6 mm dia MS bar handle made to shape, GI light grade 20mm bore pipe of suitable length for watering perforated at bottom placed on top edged of earth plate, common salt and charcoal filling, funnel, wire mesh and earth work in hard/dense soil, returning filling in distance not exceeding 50 mtr and removal of surplas soil to plate No 3 of SSR 2009 Part-I and connecting to feeder pillers and Transformer all as specified including testing on completion complete all as specified and directed.

Steel tubular swaged poles complete with cast iron plate, finial taper plug, bolt, nuts & screws as specified type 410 SP-31 (9 mtr long) including one coat of red oxide primer and two coats of aluminium paint and making 30 cm wide strips (total -05 Nos) with yellow and black paint alternately on external surface above column/PCC benching including numbering with black paint and painting with bitumenou paint internally and externally for portion embedded in PCC complete all as specified and directed.

Dismantling PCC poles any type and any size including excavation for taking out pole, breaking of PCC block with due care all as specified and directed by Engr-In-Charge.

Dismantling steel tubler poles any type and any size including excavation for taking out pole, breaking of PCC block with due care all as specified and directed by Engr-In-Charge.

Supply and fixing LED street light fitting 68/70/72 Watt 230 V AC outdoor type made with high pressure die cast aluminum housing with toughened glass and high power LED and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management complete with IP 66 protection complete. including clamp, bracket & GI pipe nut bolts etc complete.

Supply and fixing LED flood light 210 watt 230 V AC outdoor type made out of pressure die cast aluminium housing with toughened glass and high power LED and lenses with system efficacy >= 110 LPW with IP 66 protection, with impact and corrosion resistant complete with driver and lamp. including clamp, bracket & GI pipe nut bolts etc complete.

Supply and fix in replacement of electronic driver for LED street lights fitting upto 85 watt as per sample or directed by Engr-in-Charge.

Supply and fix in replacement of electronic driver for LED street lights fitting 150 to 210 watt as per sample or directed by Engr-in-Charge.

Supply and fix Hot press mounded SMC pole junction box with hinged single door (Door fixed with hinge on left side and colour Off white) size 350 mm x 250 mm x 150 mm including including 4 Nos alluminium bus bar ,50 Amps ,single phase duly insulated and fixed for terminating single phase 10 sqmm alluminium UG cable etc with 01 No ,MCB SP 10 Amps,10 KA , clamps and nut bolts complete all as per manufacturer’s instructions. Product code GSJB-3525.

Supply install, test and commissioning LT Feeder Pillar / Panel board cubical type outdoor, free floor standing factory fabricated made out of 3 mm thick CRCA sheet & suitable size to accomodate all accessories/fittings, compartmentalized in construction to accommodate incoming and outgoing MCCB, MCB and TPN Copper bus bars of rating not less 1.5 times the rated cap of incomer MCCB / ACB. The TPN bus bars shall be insulated with colour coded heat shrinkable sleeve and shall be mounted on DMC/epoxy insulator. The incoming as well as outgoing MCCBs shall have copper extension links of current carrying cap not less than 1.5 times the rated capacity of individual feeders. The cubicle shall have a detachable bottom stand made out of equal angle 50mmx50 mmX6mm . A detachable predrilled gland plateof thickness not less than 3 mm thick should be used at the bottom for entry of armoured cable of adequate size with glands.The above panel shall be front and back openable lockable /openable by key from both side, The Panel shal be manucatured from CPRI approved manufacturerof makes stipulated. The cost is inclusive of taking down of existing panel, disconnecting existing cables, reconnecting the cables with lugs & glands, Excevation, PCC Foundation all as directed. Note - (i) Contractor shall submit layout diagram of the panel and got approved from Garrison Engineer. (a) Incoming MCCB FP 415 Volt 63 Amps 25 kA - 01 Nos (b) Outgoing MCCB FP 415 Volt 63 Amps 16 kA - 02 Nos (c)Astronimical Street light timer - 1 No, with auto manual switch (d) Contactor ML 3 - 01 No (e) LED Type RYB Phase Indicator -01 Set

Excavation in trenches not exc 1.5 m wide and not exc 1.5 m in depth and getting it out for laying of cable / pole in soft/loose soil etc complete all as specified and directed by Engr-in-Charge. Note - Excevation shall be done manually by deploying manpower

Excavation in trenches not exc 1.5 m wide and not exc 1.5 m in depth and getting it out for laying of cable / pole in hard/dense soil complete all as specified and directed by Engr-in-Charge. Note - Excevation shall be done manually by deploying manpower

Excavation in trenches not exc 1.5 m wide and not exc 1.5 m in depth and getting it out for laying of cable / pole in soft disintegrated rock complete all as specified and directed by Engr-in-Charge. Note - Excevation shall be done manually by deploying manpower

Returning, filling in, including spreading, leveling watering, and well ramming in layers not exc 25 cm in hard/dense soil complete all as specified and directed by Engr-in-Charge.

Removing excavated material n.exc 50m and depositing where directed at a level exc. 1.5 cm above the starting point complete all as specified and directed by Engr-in-Charge.

M&L for crushed stone sand cushioning to UG cable, provide with the layer 8 cm before and 15 cm after laying and punning down and testing the cable complete all as specified and directed by Engr-in-Charge. Note :- Thickness of sand after punning will be measured and paid.

M&L for Sub class ‘B’ bricks old size laid dry flat over the cable abutting each other, length of cable equal to width of brick all as required.

Supply and fix GI Pipe Light grade with all connected accessories of sizes 50 mm dia complete all as specified and directed by Engr-in-Charge.

M & L for Cutting of existing road not exc 1.5 mtr in depth and not exceeding 1.5 mtr wide including black top, sub base and WBM, well ramming in layers with watering after laying of RCC /GI pipe under road making good in all respect to match with the existing surface by PCC all as directed by E-in-charge.

M&L for PCC 1:2:4 type B-1 using 20 mm graded stone agrregates as in pedestal of pole/ strut and in copping including necessary form work and finishing exposed faces of concrete even and smooth using extra cement all as directed by engineer in charge .

M & L for PCC 1:4:8 type D2 using 40mm graded stone agreegates for foundation of stay assembly , pole , struts etc all as directed by engineer in charge .

S & F cable route indicator of size 100 mm x 100 mm x 5 mm thick GI plate with insertion there on bolted welded to 35 mm x 35 mm x 6 mm angle iron 60 cm long and grounting the same in ground with PCC as required for LT cable incl necessary earth work, PCC all as specified and directed.

Supply and fix in replacement of street light Bracket made out of 40 mm bore GI tubing medium grade 1.5 mtrs long bend to shape by welding incl suitable clamp nut, bolt and washer all as required at site or directed by Engineer-in-charge.

M&L for cross arms, bracings, supports, clamps and back plates fabricated from steel section including nuts, bolts, washers, welding bending cold or hot drilling holes for bolts in any shape ors size as indicated or directed and inclusive of oneprimer coat, one under coat and one finishing coat of alumn paint.

Supply and fixing copper cable multistrand PVC insulated PVC seathead 1.5 Sqmm 3 core, drawn through Steel Tubular Pole/PVC Conduit in RCC Pole all as directed by Engr-in-charge

Supply & Fix Rigid non-metallic PVC conduit of bore 25 mm with not less than 1.8 mm wall thickness, ISI marked exclusive of boxes (junction/terminal) but inclusive of all tees, bens, elbows, recicers, bell mouth tube ends and fixing accessories such as coupers, lock nuts, saddles, screws pipe hooks etc. complete all as specified and as directed.

M & L painting of steel tubular electric poles up to 11m with preparation old steel surface of any discription over 10 cm in width or girth with applying two coat of alluminium paint incl cross arms complete all as specified.

M & L painting of PCC electric poles up to 11m with preparation old pcc surface of any discription over up to 25 cm in width or girth with applying two coat of cement base paint and cross arms with applying two coat of alluminium paintcomplete all as specified.

metro electrical services

Rama Electricals

Sunhari Electricals

MAYUR ELECTRIC SERVICES

Star Electrical

PROLINK COMPUTERS

M/S. Niksun Electro-Infra Private Limited

M/S SVOJAS ELECTROMECH ENTERPRISES

CHAITANYA WINDWELL