ADDN/ALTN AND REPAIR TO BLDG NO. P-198, ADM BLOCK ENGINRRS REGT, Spl REPAIR TO BLDG NO. P-408 (06 XOR QTR) TRIVENI VIHAR OF FD HOSP AND SEWAGE LINE MANHOLES AND SEPTIC TANKS AT UNIT AREA AND RWA GANGA AND YAMUNA VIHAR AT OLD CANTT UNDER GE (E) PRJ.

Amount

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically described (reinforement cut as required to facilitate demolition), complete all as directed by Engineer-in-Charge.

M&L for Precast Cement Concrete 1:2:4 type B1 (using 20mm graded crushed stone aggregate) as in manhole covers etc. all as specified and directed by Engineer-in-Charge. Note:-Reinforecedment shall be measured & paid seperately.

M&L for mild steel TMT bars 10 mm dia and over in reinforcement cut to length bent to shape required incl cranking bending, spirally for hooping for column, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia all as specified and as directed.

Demolition of brick or stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work, complete all as specified and directed.

M&L for brick work with fly ash bricks straight or curved on plan to any radius half brick thick wall built in CM (1: 4), complete all as specified and directed.

M&L brick work with fly ash bricks straight or curved on plan exc 6 m mean radius built in CM 1: 6 complete all as specified.

Description all as per item No-06 above, but except brick, complete all as specified.

Dismantling brick tiles any size laid bedded and pointed in any mortor, complete all as specified..

Demolition of mud in roofs any thickness and in any position and leaping over roof terrace ,removing the demolished material to a distance exc 250 m & n exc 500 m and depositing where directed at a level n exc. 1.5 m above starting point, complete all as specified and as directed.

M&L for PCC 1:2:4 type B0 (using 12.5 mm graded crushed stone agg) in roof padding finishing the surface fair & even, complete all as specified..

M&l screed bed 10 mm thick in cement mortar 1:3 over roof slab mixed with water proofing compound ( WPC to be measured and paid separately) as per manufacturer’s instructions finished even & fair complete all as specified.

M&L priming surface with approved bitumen primer confirming to IS 3384-1955@ 0.50Kg per Sqm and applying hot blown grade 85/25 bitumen as per IS 702-1988 @ 1.2 Kg per Sqm and laying of polymeric water proofing membrane asphaltic polythene film of weight not less than 3 kg per sqm with minimum 100 mm side overlap and 150mm along the length from down lamps to upward completely sealed with hot blown lamps to upward, complete all as specified.

M&L for preparation of new surface of APP membrane and treating/ applying two coat of heat resisting paint complete all as specified and directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified.

M&L for Coloured Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over & including 15 mm thick screed bedding in cement mortar (1:6) complete all as specified and as directed.

M&L for Coloured Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in vertical surface, skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match fixed over & including 10 mm thick rendering in cement mortar 1:4 Complete all as specified and directed

M&L for Coloured Non - skid Ceramic tiles 7 to 8 mm thick (300X300 square) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over & including 15 mm thick screed bedding in cement mortar (1:6) complete all as specified and as directed.

M&L for Coloured Glazed ceramic tiles in vertical surface 450X 300X 7mm or 450X 350X 7mmthick set and jointed in neat cement slurry and pointed in white or colour cement to match fixed over and including 10mm thick plaster in cement mortar (1:4) complete all as specified and directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar, complete all as specified.

M&L for Baroda green Marble flooring 18 to 20 mm thick laid over and including 20 mm screed bedding in cement mortar (1:4) (table rubbed and polished) including steps, stairs, jambs,pillars, window cills, cooking platforms set, jointed in gray cement and pointing in white cement (1:2) using marble dust with admixture to match with shade of marble incl rubbing and polishing complete all as specified and directed.

M&L for Baroda green marble slab 18-20 mm thick (in full length one piece) in riser of steps, stairs, skirting dado and pillar laid over and incl 10 mm thick rendering in cement mortar (1:3) and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl rubbing and polishing complete all as specified and directed.

M&L for 20 mm thick Granite slab work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in 20 mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. including rounded/half rounded edge and hole for gas pipe in pre-cast slab as well as stone slab in cooking platform complete all as specified

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations etc complete all as specified..

Demolition of cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) incl chequered tiling and Paver blocks, complete all as specified.

M&L for 25 mm thick PCC 1:2:4 type B-0 (using 12.50mm graded crushed stone aggregate) as in sub base floor finishing surface even and fair, complete all as specified.

M&L for 1st quality non skid coloured ceramic ENDURA tiles exc 0.06Sqm & n exc 0.11 Sqm 10 mm thick set and jointed in neat cement slurry & pointed with coloured cement to match in floor over and including including 15 mm thick screed bed in cement mortar (1:4) complete all as specified and directed.

M&L for 75 mm thick cement concrete type-C-2, 1:3:6 using 40mm graded crushed stone aggregate finished cement concrete surface even and smooth without using extra cement in floor, complete all as specified.

M&L for 75 mm thick PCC 1:3:6 type C2 (using 40 mm graded crushed stone aggregate) as in plinth protection, finishing cement concrete surface even and fair, complete all as specified..

Taking down cement plaster on brick or stone walls or ceiling etc including racking out joints, hacking for key, scrubbing down with water etc. complete all as specified.

M&L for rendering 15 mm thick on fair faces of brick work in CM in 1:4 finished even and smooth without using extra cement and mixing with water proofing liquid as per manufacturer instruction (but excluding the cost of water proofing liquid ) external surface complete all as specified.

Supply only Liquid water proofing admixture of approved make.

M&L for 15mm thick rendering in CM 1:6 on other than fair faces of brick or stone masonry wall surfaces & finishing the surface even and smooth without using extra cement, complete all as specified.

M&L for rendering 5 mm thick in CM 1:3 on concrete surface in ceiling & finishing the surface even and smooth without using extra cement, complete all as specified.

M&L for preparation of new plastered surface and applying two coats of cement base paint on walls over a coat of alkali resistance primer complete all as specified and directed.

M&L for preparation of old plastered surface and applying two coats of cement base paint on walls over a coat of alkali resistance primer incl complete removal of existing treatment complete all as specified and directed.

M&L for preparation of new plastered surface and applying two coats of oil bound distemper on walls incl 1 mm thick wall care putty complete all as specified and directed.

M&L for preparation of old plastered surface and applying two coats of oil bound distemper on walls incl 1 mm thick wall care putty including complete removal of existing treatment complete all as specified and directed.

M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified.

M&L for preparation of old surfaces of ceiling and applying two coats of white wash complete all as specified.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings heads, shoes, bends, swan-necks, etc., incl cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories), complete all as specified

S&F 110mm PVC (SWR) pipes single socketed, excluding fittings in any length with rubber ring joints, laid in trenches or in floors, complete all as specified

S&F 75mm PVC (SWR) pipes single socketed, excluding fittings in any length with rubber ring joints, laid in trenches or in floors, complete all as specified.

S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall incl necessary clamp etc complete all as specified.

S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall incl necessary clamp etc complete all as specified.

S&F 110mm PVC (SWR) bends with access door, complete all as specified

S&F 75mm PVC (SWR) bends any radius with acess door, complete all as specified .

S&F 75 mm PVC (SWR) junction single, (Single T) equal or unequal with acess door, complete all as specified .

S&F110mm PVC (SWR) junction single, (Single T) equal or unequal with acess door, complete all as specified .

S&F110mm PVC (SWR) vent cowl, complete all as specified.

S&F in repair 75mm PVC floor trap plain with grating including jointing with solvent cement, complete all as specified

S&F in repair Stack clamps made out of 50mm x 5mm flat iron & 16mm round iron stays including bolts & nuts and securing ends of stays for 100/110mm bore pipe, complete all as specified .

Description all as per item No-51 above for 75mm bore pipe.

M&L for Cutting chases pinning in , making good to facing where reqd. and pointing in CM 1:3 to ends or edges of landing , steps, cills, sunshades,selfs lintels etc. and cutting chases for conceled for water tubing or conceled condute wiring etc and making good, cutting n.exc 10cm girth.complete all as specified & as directed.

Taking up or down steel tubing and connection including cleaning for refixing or removal to store 15mm bore pipe, complete all as specified .

S&F GI tube 15mm bore medium grade with all fittings fixed to walls and ceilings or laid in floor complete all as specified and directed.

Refixing old steel tubing 15 mm dia with new fittings required and connections in new or old position (Walls, ceiling, floors, etc.), complete all as specified

Taking up or down steel tubing and connection including cleaning for refixing or removal to store 20mm bore pipe, complete all as specified.

M&L 20mm bore GI tubing medium grade with all fittings and fixed complete to walls/ ceiling or laid in floors complete all as specified and directed by Engineer-in-Charge.

Refixing old steel tubing 20 mm dia with new fittings required and connections in new or old position (Walls, ceiling, floors, etc.), complete all as specified

S&F Bib tap 15 mm bore with flange, Brass CP, fancy type. with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule and fixed in repairs, complete all as specified.

S&F in repair 15 mm size angular cock, cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed both end for iron pipes, complete all as specified.

S&F in repair Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including setting the trap and pan in concrete with and including 10 ltr capacity PVC valveless syphonic action type low level flushing cistern and 32mm dia PVC Flush pipe complete including jointing to socket of flushing rim all as specified and as directed.

S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S&F in repair Sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specified and directed.

S&F in repair vitreous china wash hand basin with pedestal pattern white flat back size 550 x 400 mm excluding taps waste chain and plug but including bracket or any other fixing arrangement, waste coupling of 32 mm size fixed in repair complete all as specified and directed by Engineer-in-Charge.

S&F in repair 15 mm bore central hole basin mixer with 450mm braided connection pipe (without popup) complete all as specified and directed

S&F in repair Brass chromium plated shower rose 125 mm size with shower arm and fixed complete all as specified and directed.

S&F in repair 15 mm bore stop valve fancy type chromium plated with long cup and shank (Concealed type) screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed

Supply and fix 500 liters capacity white colour triple layer, rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 20 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe complete and including dismantling of old tank complete all as specified and directed.

S&F in repair 20 mm dia Gun metal, globe or gate valves,with iron wheel head,screwed both ends for iron pipes and fixed, complete all as specified and directed.

PVC connections 15mm size with PTMT nuts of length 600mm, complete all as specified and directed.

S&F 32mm bore Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 and fittings, fixed complete to walls, ceilings or in floors etc., complete all as specified and directed.

S&F 40 mm bore Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 and fittings, fixed complete to walls, ceilings or in floors etc., complete all as specified and directed.

S&F in repair Kitchen rack plate of stainless steel of size 75 x 60cm complete all as specified and directed.

S&F in repair brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges including brackets fixed to wall complete all as specified and directed.

S&F in repair brass chromium plated Tumbler holder all as specified as approved by Engr-in-charge.

S&F in repair SS soap dish any type of standard size complete all as specified and directed

Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically described complete all as directed by Engineer-in-Charge.

M&L for Treatment to sunken floor and sides as mentioned here after:- (Step-I):-Cleaning of RCC surface to remove existing treatment to sides and base slab by using sand blasting with compressed air. (Step-II):-M&L application of a coat to sides and base of sunken with glass fibre reinforced acrylic modified cementitious coating system with base coat of Sika Top & Seal -107 @ 1.50 Kg/Sqm glass fibre reinforcement Sika Fab-I and top coat with Sika Seal-107@ 1.50 Kg/Sqm or equivalent of Forsoc or pidilite. (Step-III) :-M&L 15 mm thick cement plaster on side and base slab of sunken part in cement mortar 1:3 mixed with appropriate integral water proofing compound with Sika Plastocree plus as specified. (Step-IV):-M&L applying evenly a tack coat of industrial bitumen 85/25 @ 1.20 Kg/Sqm on plastered surface of sunken sides & base. Note:All debris obtained from site will be thrown away out side Def Land by contractor at his own expense.

M&L for Cement concrete 1:5:10 type E2 using 40mm graded crushed stone aggregate as in sunken part of slab complete all as specified and directed

S&F in repair 25 mm dia stainless steel curtain rod of 304 grade for door & windows incl one pair of SS Bracket and steel end cover for each rod cut to size and fixed in position complete all as specified and directed.

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) area not exc 1.5 Sqm each complete all as specified.

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) area exc 1.5 Sqm but n exc 4.00 Sqm each complete all as specified.

Dismantling boarding any desccription fixed in any position with nails or any other means complete all as specified and directed

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm thick single side prelam PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with prelam sheet PVC sheet reinforced with M.S. square tube,supplying & fixing in opening as per specification & drawing complete all as specified.

S&F Factory Made Solid PVC Moulded Door Shutter with particle board core 28 to 30 mm thick (stiles), with 2, 4, or 6 raised panel design with 2 mm thick Moulded PVC Sheet on the front face & 2 mm plain colour PVC sheet on back face, with Particle board core, supplying & fixing in the frame at site as per specification & sketch shown in section 8 of SSR part II.

S&F Factory made Pressed steel frames of size 125x60mm made out of PBI sheet 1.25 mm thick for doors with one or more rebates including necessary fixing lugs, hinge,lock strike plate etc.complete including bottom of each chowkat to be welded with 01 No 25x25x3mm thick angle iron projecting 10cm on either side & tarring back of chowkats and holdfasts complete all as specified & directed.

S&F Factory made Pressed steel frames of size 105x60mm made out of PBI sheet 1.25 mm thick for doors with one or more rebates including necessary fixing lugs, hinge,lock strike plate etc.complete including bottom of each chowkat to be welded with 01 No 25x25x3mm thick angle iron projecting 10cm on either side & tarring back of chowkats and holdfasts complete all as specified & directed.

M&L for preparation of newly primed steel surfaces of any description not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint of Ist quality, complete all as specified and as directed.

M&L PCC (1:2:4) type B-1, using 20mm graded crushed stone aggregate as in bed block and filling in door frames, complete all as specified and as directed.

S&F 32 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F for 2nd class hard wood 35mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc., sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a), supplied and fitted to chowkats, complete all as specified and directed.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed.

S&F 150mm stainless steel handles fabricated type, complete all as specified and directed.

S&F 200mm stainless steel barrel tower bolts fabricated type and fixed complete all as specified and directed..

S&F 250mm stainless steel, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts fixed complete all as specified and directed.

M&L for preparation of new or previously untreated steel surfaces of any description not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint of Ist quality over a coat of red oxide primer, complete all as specified and as directed.

M&L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified.

S&F 100 mm long stainless steel hinges, complete all as specified and directed.

M&L MS Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars and similar work conforming to Fe.290.Gde-E-165, complete all as specified and directed

Powder coated anodised aluminium frame for doors, windows, ventilators powder coated (thickness of powder coating not less than 50 micron) with one or more rebates including jointing cleat for fixing etc complete all as specified and directed.

Powder coated anodised aluminium window and ventilator shutters, powder coated (thickness of powder coating not less than 50 micron) side hung type without sash bars aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading screws, anodised aluminium fittings such aspeg stays 150 mm long (1 no) hinges type B-21 100 mm long (2 no) suitable (1 no) tower bolt 100 mm long (1 no.) complete all as specified.

M&L for 4.8 mm thick sheet glass ordinary quality and glazing with beading n exc 0.5 sqm in each pane complete all as specified and as directed.

M&L for 4.8 mm thick frosted sheet glass ordinary quality and glazing with beading n exc 0.5 sqm in each pane complete all as specified and as directed.

S&F 140mm Floor door stopper of aluminium alloy body and tongue, with hard drawn steel spring, complete all as specified and as directed.

S&F in repair 300mm, Mild Steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed..

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and as directed.

S&F Rolled MS Joist, channel, angle, or tee sections, fixed independently, without connection plate, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) Fe 410 -W (Gde- E-250) quality A, complete all as specified and as directed.

M&L for Cutting holes into or through brick walls built in cement mortor superficial area n exc 150 sq cm and making good in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and as directed.

S&F in repair 150 mm X 100 mm Salt-glazed stoneware gully traps, square or round mouthed, tvpe 'P' and setting and jointing in cement mortar 1:1 complete all as specified and directed.

S&F 25 mm thick prelaminated (PVC) ply of colour fixed with screws solvent cement/ adhesive to make wall mount kitchen cabinet, Cupbord, back and pull out drawer sides complete all as specified and directed.

S&F continous (piano) hinges mild steel bright finish of width 30 mm complete all specified and directed

M&L for 25 mm thick PCC 1:2:4 type B-0 (using 12.50mm graded crushed stone aggregate) as in sub base floor finishing surface even and fair, complete all as specified.

M&L priming surface with approved bitumen primer confirming to [email protected] per Sqm and applying hot blown grade 85/25 bitumen as per IS 702-1988 @1.2 Kg per Sqm and laying of polymeric water proofing membrane asphaltic polythene film of weight not less than 3Kg per Sqm with minimum 100mm side lap and 150mm along the length from down lamps to upward completely sealed with hot blown lamps and applying hot blown bitumen 85/25 [email protected] Kg per Sqm and spraying binding materials such as sand in dry [email protected] to 1.00 Kg per Sqm shall be dusted over bitumen complete with leaking testing complete all as specified and as directed by Engineer-in-charge.

Cement concrete tiles 25cm x 25cm x 22mm thick, machine pressed; set jointed and pointed in neat cement slurry in floors, and cut and polished with & including 20mm screed bedding in cement mortar (1:4), complete all as specified and as directed

M&L for Vitrified ceramic tiles dark shade/double charged/ ultra charged 10 mm thick (square/rectangular) polished, area of eacg tile exceeding 0.42 sqm but not exceeding 1.00sqm in floors etc laid over and including 15 mm thick screed bed in cement mortar 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match the tile surface, complete all as specified and as directed.

Description all as per item No-117 above but as in dado/skirting fixed over & including 10mm thick cement plasterin CM 1:3, complete all as specified.

M&L for 1st quality non skid coloured ceramic ENDURA tiles exc 0.11 sqm & n exc 0.18 Sqm 10 mm thick set and jointed in neat cement slurry & pointed with coloured cement to match in floor over and including including 15 mm thick screed bed in cement mortar (1:4) complete all as specified and directed. Note:-Size & colour of tiles shall be approved by GE before excution of work at site.

Taking down Shutter of any description exc 2 sqm each, complete all as specified and directed.

Supply and fixing factory made uPVC white colour two track four panels sliding glazed door made of (big series) frame 67x 50 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead/ double glazing bead of appropriate dimension. comprising of uPVC multi-chambered frame, with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension uPVC extruded glazing beads, uPVC extruded interlock and uPVC extruded Inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle with key on one side of extreme panels along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) cresent lock (if required), stainless steel (SS 304 grade) body .......contd to item No-121.01

with adjustable multi nylon rollers, G.l fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

Providing and fixing false ceiling at all heights with GRG (Glass Fibre reinforced Gypsum) false ceiling tiles of size 595 X 595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRCO.50 to 0.75 as per IS 8225:1987, Non-combustible as per BS 476 (part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33 mm thick (galvanized @ 120 grams per sqm incl both sides) comprising of main T-runners of size 15 x 32 mm of length 3000mm, cross-T of size 15 x 32 mm of length 600mm to form grid module of size 600x 600mm, suspended from ceiling using galvanized mild steel items (Galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L- shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x 0.40mm of length 3000 mm to be fixed on ........contd to item No-122.01

periphery wall/ partition with the help of plastic rawl plugs at 450 mm centre to centre and 40 mm long dry wall wood screws. with fully Perforated 12 mm thick micro tegular edged or 10 mm thick square edged GRG false ceiling tiles, complete all as specified. The work shall be carried out as per specifications, drawing and as per directions of Engineer-in-Charge.

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement, complete all as specified.

M&L Toughened plain/ Frosted glass of 8 mm thickness of any description icl necessary fittings to be fixed on SS Railing, partitions,doors and other work including cutting to shape, drilling holes as required complete all as specified and directed.

S & F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed

S&F 5 mm thick PVC Sheet fillet of width 35 mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specification and drawing complete all as specified and directed.

S&F powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows ventilators and partitions (fixed partition) with extruded built up standard sections/ appropriate Z sections and and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, incl necessary filling up the gaps at junctions i.e at top bottom and sides with required EPDM Rubber/ neoprene gasket etc. ALuminium section shall be smooth rust free, straight, mitred and jointed mechanically wherever required incl cleat angle, ALumnium snap beading for glazing panelling, CP Brass/ stainless steel screws all complete as per architectural drawing and the direction of Engineer-in-charge.

S&F 150 mm long aluminium anodised barrel tower bolts of extruded section & fixed complete all as specified and directed.

S&F 250 mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extruded sec or cast- Aluminium Alloy and fixed complete all as specified and directed..

S&F Aluminium handles 150 mm cast type anodised complete all as specified and directed.

M&L Non Skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceding 0.11 sqm but n.exc 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match and layed over & including 15mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes, complete all as specified and directed.

S&F 15 mm bore Pillar taps fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and direcetd.

S&F in repair Vitreous China Half stall type urinal (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe inclusive of fixing supply pipe to flushing cistern, trap and waste pipe and waste coupling, complete all as specified and directed.

S&F Urinal spreader of PTMT any colour for fixing with 15mm dia pipe.(Minimum weight 60gms), complete all as specified and directed.

S&F in repair Vitreous china wash down water closet pedestral pan white, including 10 ltrs PVC valveless, syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including brackets, flush pipe of polythylene of low or high density or PVC 32mm dia, Plastic water closet seat, closed pattern with recessed bottom, and cover and mild steel chromium plated or aluminium hanging device, complete all as specified and as directed.

S&F in repair health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia and 1.25 m long flexible tube with ABS wall hook including making connections and fixed in position complete all as specified and directed. Cat No : ALD-565 of Jaquar or equivalent cat part of make as specified in list of make.

S&F in repair 2 way angle cock with wall flange 15 mm dia including fixing to pipe complete all as specified and as directed. Make: Prayag Cat No. 8711 or equivalent cat part of make as specified in list of make.

S&F Aluminium handles 100 mm cast type anodised complete all as specified and directed

M&L Brickwork withsub class 'B' bricks, straight or curved on plan exc 6m mean radius, built in old size brick in CM 1:6, complete all as specified and directed

M&L for 10mm thick rendering in CM 1:6 on other than fair faces of brick or stone masonry wall surfaces & finishing the surface even and smooth without using extra cement, complete all as specified.

M&L for preparation of new plastered surfaces of ceiling and applying two coats of white wash complete all as specified.

M&L for preparation of old steel surfaces and applying two coats of synthetic enamel paint complete all as specified.

M&L for preparation of old wooden surfaces over 10 cm width or girthand applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified & directed.

S&F in repair rotational moulded polythene water stoarage tank, cylinderical vertaical with closed top, hoisted and fixed in position, 1000 Ltr capacity complete all as specified and directed

S&F 20 mm dia Ball brass valve high pressure of PTMT with apoxy coated Aluminium rod & high density plastic ball screwed for iron pipe abd fixed (min Weight 210 gms) complete all as specified and direcetd.

Excavation in trenches n.exc 1.5 mtr wide and n. exc 1.5 mtr depth for foundation, for shafts, wells,cesspits, manholes, Pierholes etc n. exc 10 sqm on plan and n. exc 1.5 mtr in depth and getting out any type of soil complete all as specified and direcetd.

All same as item No. 146 above but exc 1.5 mtr and n.exc 3.0 mtr deep any type of soil complete all as specified and direcetd

Demolition and breaking up RCC/Salt glazed stoneware drain pipe set & jointed in cement mortar laid in trenches 150mm bore of pipe, complete all as specified and direcetd.

Demolition and breaking up RCC/Salt glazed stoneware drain pipe set & jointed in cement mortar laid in trenches 200mm bore of pipe, complete all as specified and direcetd.

Demolition and breaking up RCC/Salt glazed stoneware drain pipe set & jointed in cement mortar laid in trenches 300mm bore of pipe, complete all as specified and direcetd.

M&L for plain cement concrete 1:2:4 type B-1 using 20 mm graded crushed stone agg as in surface channel or drains, benching including finishing the top of benching or for kerb and edging even and smooth using extra cement (Forming fair finished channel shall be measured separately).

supply and laying, jointing and testing in trenches DWCPE SN 8) nominal size 163 (ID)/180 (OD) dia as per IS-16098 (Part-2): 2013 upto a depth of 1.65 m with and including all items and activities required to make sewer line functional complete all as specified and as directed. Make supreme/prince/finolex

supply and laying, jointing and testing in trenches DWCPE SN 8) nominal size 175 (ID)/200(OD) dia as per IS-16098 (Part-2): 2013 upto a depth of 1.8 m with and including all items and activities required to make sewer line functional complete all as specified and as directed. Make supreme/prince/finolex

Supply and laying, jointing and testing in trenches DWCPE SN 8) nominal size 260 (ID)/300(OD) dia as per IS-16098 (Part-2): 2013 upto a depth of 2.1 m with and including all items and activities required to make sewer line functional complete all as specified and as directed. Make supreme/prince/finolex

M&L for Cement concrete 1:4:8 type D2 using 40mm graded crushed stone aggregate as in fondation filling & mass concrete complete all as specified and directed.

M&L Brickwork withsub class 'B' bricks(except brick) , straight or curved on plan exc 6m mean radius, built in old size brick obtained from demolition in CM 1:6, complete all as specified and directed.

Material and labour for plain cement concrete 1:2:4 type B-0 using 12.5mm graded crushed stone agg as in coping of manhole including necessary form work complete all as directed.

Supply only waterproofing compound.

Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc. vertical or to batter for rough finished surface of concrete, complete all as specified and directed.

M&L Reinforced cement concrete (nominal mix) type B1 (1::2:4) 20 mm graded aggregate in Walls, retaining walls, basement walls, ballast walls and the like ;any thickness; above top of footings; including attached pilaster and buttresses and in manholes complete all as specified and as directed.

S&F mild steel TMT bar 6 to 8 mm dia cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, beam , slab etc hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clip complete complete all as specified and as directed.

Returning , filling in soft soil /disintegrated Rock (any type) incl spreading levelling, watering and well ramming in layers not exceeding 25 Cm thick complete all as specified and as directed.

Removing surplus soil excavated material exc250m but n.exc 500m where directed at a level not exceeding 1.5 Mtr above the starting point complete all as specified and as directed.

Supply and Fix cast iron foot steps, n. exc 5 Kg each in manholes, complete all as specified and as directed.

Cutting in to existing manhole for connecting new drains and making good to pipe of 150mm dia and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete (1:2:4) type B-1 smooth finish and reforming benching as asked, complete all as specified and as directed..

Cutting in to existing manhole for connecting new drains and making good to pipe of 200mm dia and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete (1:2:4) type B-1 smooth finish and reforming benching as asked, complete all as specified and as directed..

Dismantling of cast iron of CI drain pipe/PVC drain pipe jointed in cement mortor of size 110/100mm bore complete all as specified and as directed.

All as per Item No 166 above but 75 mm dia

S&F PVC (SWR) branch pieces single socketed Y equal or unequal 110mm, complete all as specified and as directed.

S&F PVC (SWR) bends any radius 110mm, complete all as specified and as directed.

S&F PVC SWR vent cowl 75mm, complete all as specified and as directed.

Cutting and grubbing of bushes grass and tree surrounding sewage line and levelling of ground around the sewage line, finish the surface and removing the waste material to distance exc. 50m and n exc. 250m and clearing the site, complete all as specified and as directed. .

Cleaning of septic tanks of any capacity & any size by taking out sludge (work in foul condition) by Temporarily blocking of inlet of septic tanks with suitable wooden pugs/gunny bags and pumping out/bailing out effluent (liquid/semi liquid) from the septic tanks with diesel engine driven gen sets into closed containers or through PVC Hose pipes & delivering the same outside def land complete and taking out the blocking arangements of inlet and making the system functional all as specified and directed.

S&F in repairs vitreous china wash down water closet (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe), fixing seat cover including connection to drain (or outgoing pipe, and to flushing pipe & antisyphonage pipe etc with aluminium hinging device complete all as specified. Note : Plastic seat cover shall be measured separately as Supply only as considered under respective items.

Taking down copper/ aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors etc. to match the existing complete all as specified and directed.

Taking down main switches, distribution boards and cut outs etc. of any type and capacity along with the existing boards and removing the same from site and making good the disturbed surface/portion of walls complete all as specified and directed..

Taking down carefully sub main wiring of any Nos of wire and size with earth wire on wooden batten/surface conduit/casing caping complete with its all accessories, complete all as specified and directed..

M&L for point wiring complete with PVC insulated unsheathed, 1100 volts grade cable 1.5 Sqmm (nominal area) FRLS type multi stranded copper conductor, single core drawn in and including not less than 20 mm dia rigid PVC conduit 'medium grade' ISI marked including all conduit accessories for concealed wiring for one light/fan/bell/exhaust fan point controlled by one, one way switch, including concealed pressed steel terminal box of required size not less than 1.6 mm thick factory made duly painted inside & outside with two coats of black bituminous paint over & including a coat of red oxide primer, with 3.0 mm thick top cover of plastic laminated sheet of required colour for mounting switch, sockets, fan regulator etc including 1.5 Sqmm FRLS type PVC insulated unsheathed cable multi-stranded copper conductor as continuous earth wire and connected to earth dolly as required at site& including chases cutting & making good disturbed surface & applying finishes to match existing surface complete all as specified and directed.

All as per srl item No-177 above but for one 5 pin 5 Amp socket outlet point on an independent board with cables of size 2.5 sqmm.

All as per srl item No-177 but for one 5 pin 5 Amp socket outlet point on the same board with other switch with cables of size 1.5 sqmm..

All as per srl item No-177 but for one bell/buzzer point controlled by one bell push single pole one way

All as per srl item No-177 but for one light point controlled by two two-way switches.

All as per srl item No-177 but for one 6 pin 15/16 amps socket outlet point on an independent board with cables of size 2.50sqmm.

All as per srl item No-177 but for on independent board with cables of size 4 sqmm (for AC point) complete.

S&F Switch piano, flush type, single pole, one way 5/6 Amp 230 Volts complete all as specified and directed.

S&F Switch piano, flush type, single pole, two way 5/6 Amp 230 Volts complete all as specified and directed.

S&F Socket outlet, 2 in 1, 5 pin 5/6 Amp, 230 volts, flush type complete all as specified and directed.

S&F Switch piano, flush type, single pole, one way 15/16 Amp 230 Volts complete all as specified and directed.

S&F Socket outlet, 2 in 1, 6 pin 15/16 Amp, 230 volts, flush type complete all as specified and directed.

S&F Lamp holder PVC/ Polycarbonate type with back plate incl LED bulb 9/10W suitable for batten fittings complete all as specified and directed.

S&F ceiling rose, 3 terminal, PVC/ Polycarbonate, insulated body, surface bakelite sheet 63.50mm dia complete all as specified and directed.

S&F bell push piano, flush type, single pole, one way 5/6 Amp 230 volts complete all as specified and directed.

S&F electric bell ding dong type AC 230 Volts, 50 Hz single pole complete all as specified and directed.

S&F ceiling fan regulator, electronic, rotary step type suitable for 1200/1400 mm sweep ceiling fan complete all as specified and directed.

S&F sheet metal enclosure for MCB DB double door type, single pole and neutral 8 way 240Volts with 200 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, factory made complete without MCB and with enclosure blank plates for unused way complete all as specified and directed.

S&F MCB Single Pole and neutral, 6-32 Amps 240 volts, 10KA breaking capacity, convenient to 'C' Curve complete all as specified and directed.

S&F MCB Single Pole, 6 to 32 Amps 240 volts, 10KA breaking capacity, convenient to 'C' Curve complete all as specified and directed.

S&F 1 x 10W LED Mirror light fitting, LED 6000K, Decorative Indirect up-down light for mirror and as wall light application with extruded polycarbonate, environmental friendly, energy efficient complete with all accessories, prewired and making connection with and including three core flexible copper cable of size 23/0.0076 from ceiling rose to connector of required length including LED lamp complete all as specified and directed.

S&F 1 x 10W LED Bulk head light fitting, LED 600 lumen, enclosed in polycarbonate body, weather proof, LED light fitting fixture with co extruded polycarbonate body, environmental friendly, energy efficient complete with all accessories, prewired and making connection with and including three core flexible copper cable of size 23/0.0076 from ceiling rose to connector of required length including LED lamp complete all as specified and directed.

S&F 1 x 18/20W LED wall mounted tube light fitting, LED 6000K, Decorative ultra slim linear LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient complete with all accessories, prewired and making connection with and including three core flexible copper cable of size 23/0.0076 from ceiling rose to connector of required length including LED lamp complete all as specified and directed.

S&F Decorative wall light fixture made up of Polycarbonate, suitable for B-22 base polycarbonate body, weather proof, LED light fitting fixture with co extruded polycarbonate body, environmental friendly, energy efficient complete with all accessories, prewired and making connection with and including three core flexible copper cable of size 23/0.0076 from ceiling rose to connector of required length including 9/10W LED bulb complete all as specified and directed.

S&F 35 Watt road lighting luminaire with unique peanut optics to ensure uniform distribution, higher spacing between poles and maintenance free system for city roads and Streets, 50% Energy Savings, IP66 Protection PC and FG Cover, High Impact Resistance complete including LED Lamps and all accessories including bracket made out of 25mm bore GI pipe (light grade), 1.20 m long made to shape and fixed to existing pole or bldg by means of 2 Nos mild steel flat iron 40x6mm clamps with suitable size bolt, nuts & washers and including connecton with three core flexible copper wire of size 23/0.0076 from ceiling rose complete all as specified and directed.

M & L for earthing complete with galvanised steel earth plate electrode 600x600x6mm thick directly buried in ground (earth pit not less than 2.25 m deep below ground level) with top edge of earth plate not less than 1.5m below the ground level connected to GI earth wire 4mm dia by means of bolts nuts check nuts and washers of galvanised iron at 2 points & GI pipe 15 mm bore light grade for protection of earthing wire PCC chamber 1:3:6 (type C-1) using 20mm graded stone aggregate, watering pipe 20mm bore light grade, funnel with wire mesh, 50 mm thick cover of RCC 1:2:4 type B-1 using 20mm graded stone aggregate reinforced with 8 mm MS bars at 150 mm centre to centre both ways and charcoal dust and common salt all as shown in electrical plate No. 3 of MES SSR part-I and including excavation & earth work & connecting the earthing point/equipment and testing complete all as specified & directed.(Note- The cost of GI wire and protection pipe upto test point shall be included in above quoted rates.)

S&F sub main wiring with two single core FRLS PVC insulated unsheathed multistranded copper conductor of size 4sqmm nominal cross sectional area and one run of 4sqmm nominal cross sectional area FRLS PVC insulated unsheathed multistranded copper conductor green colour as continuous earth wire drawn in and including 20mm dia 'medium grade' PVC concealed conduits and fittings, including taking down existing sub main wiring complete all as specified and directed. NOTE: One unit length shall measured as two run of main wire and one run of conduit & earth wire

Taking down carefully ceiling fan/ exhaust fan by disconnecting all electrical connection and refixing the same including electric connection wire 3 core 23/0.0076 copper conductor cable incl fixing new louvers for exhaust fans complete all as specified and directed.

Taking down carefully existing geyser by disconnecting all electrical connection and refixing the same including PVC connection pipe (02 Nos) hot and cold with cable 3 core cable of suitable size if required complete all as specified and directed.

S&F two pin and earth plug and socket with 1 MCB single pole 20 to 32amps C series 10KA in sheet metal enclosure and connecting complete all as specified and directed.

(vi) MCB two pole 240 volts AC 50 Hz, 32 amps rating breaking capacity 25 KA fixed magnetic and adjustable thermal release - 06No. (vii) fixing and connection of existing energy meter - 06 nos (viii) Name slip holder on each compartment for identification of Accn - 07 Nos (ix) Earthing terminals - 02 Nos (x) MCB SPN 20A 10 KA B series - 01 Nos (xi) Earthing terminal - 02 Nos

Supply, laying,testing XLPE cable Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 sq mm 3½ core including taking out old unsv cable, complete all as specified and directed. .

Supply, laying,testing XLPE cable Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 95 sq mm 3½ core including taking out old unsv cable, complete all as specified and directed. .

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers including making holes on wall and making good the disturbed surface all as specified and directed by Engr-in-Charge.

M&L Sand cushioning with dry local sand for cable protecting under ground cable (8 cm before laying the cable and 15 cm after laying the cable) in trenches including punning the sand upto 18 cm thick and consolidated complete all as specified and directed. NOTE : Punned thickness only shall be measured.

Supply and laying dry well burnt locally available brick sub class'B' modular bricks laid flat with width equal to the length of whole bricks over cable as cable protection complete all as spcified and directed .

S&F 50 mm dia Galvanised steel tubing light grade with all necessary fittings laid in trenches, fixed to walls, poles, under road/ floor etc for cable protection, complete all as specified and directed.

S&F 80 mm dia Galvanised steel tubing light grade with all necessary fittings laid in trenches, fixed to walls, poles, under road/ floor etc for cable protection, complete all as specified and directed.

Vertical distribution board TPN 4 ways with built in bus bars, neutral links, blanking plates double door suitable for FP MCCB as incommer and out going SP/TP MCBs, complete all as specified and directed

S&F MCCB 125 Amp 4 pole 16KA suitable for VTPN here in above for adjustable thermal & fixed magnetic, complete all as specified and directed.

Sheet metal enclosure factory made (Double door) for DBs, single pole and neutral, 240 volts, 12 way with 200Amps rated bus bar fixed on walls, including connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning fixed in repairs, complete all as specified

S&F MCB Single Pole, 40 to 63 Amps 240 volts, 10KA breaking capacity, convenient to 'C' Curve complete all as specified and directed.

S&F MCB Single Pole and neutral, 40 to 63 Amps 240 volts, 10KA breaking capacity, convenient to 'C' Curve complete all as specified and directed.

Disconnecting and taking out old unserviceable submain wiring and S&F sub main wiring with two single core PVC insulated FRLSH unsheathed, multistranded copper conductor cable 10 Sqmm with one single core 10 Sqmm PVC insulated FRLSH unsheathed, stranded copper conductor cable as earth wire in and including PVC conduit medium grade of suitable size, ISI marked, duly concealed to wall/floor or above false ceiling of suitable size with all fitting and accessories laid on wall/ceiling and earth wire connected to common earth point complete all as specified & directed. Note:- Two run of 10 sqmm sinle core cable as phase and neutral, one run of 10 sqmm single core cable as earth(green in color) and one run of PVC rigid conduit will be considered as one RM

Disconnecting and taking out old unserviceable submain wiring and S&F sub main wiring with two single core PVC insulated FRLSH unsheathed, multistranded copper conductor cable 6 Sqmm with one single core 6 Sqmm PVC insulated FRLSH unsheathed, stranded copper conductor cable as earth wire in and including PVC conduit medium grade of suitable size, ISI marked, duly concealed to wall/floor or above false ceiling of suitable size with all fitting and accessories laid on wall/ceiling and earth wire connected to common earth point complete all as specified & directed. Note:- Two run of 6 sqmm sinle core cable as phase and neutral, one run of 6 sqmm single core cable as earth(green in color) and one run of PVC rigid conduit will be considered as one RM

Disconnecting and taking out old unserviceable submian wiring and S&F sub main wiring with four single core PVC insulated FRLSH unsheathed, multistranded copper conductor cable 25 Sqmm with one single core 16 Sqmm PVC insulated FRLSH unsheathed, stranded copper conductor cable as earth wire in and including PVC conduit medium grade of suitable size, ISI marked, duly concealed to wall/floor or above false ceiling of suitable size with all fitting and accessories laid on wall/ceiling and earth wire connected to common earth point complete all as specified & directed. Note:- Four run of 25 sqmm single core cable as 3 phases and neutral, one run of 16 sqmm single core cable as earth(green in color) and one run of PVC rigid conduit will be considered as one RM

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified.

LED lamp CDL 10 watt with holder base (B22) type, complete all as specified.

S&F rigid non-metallic PVC conduit 25mm exclusive of boxes (junction/terminal) but inclusive of all tees, bends elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc duly concealed and making surface good.

S&F White cover plate with frame, one module in repairs complete all as specified.

S&F metal flush box 1/2 module in repairs complete all as specified.

S&F telephone socket RJ 11 with shutter one module in repairs complete all as specified.

S&F Junction boxes (1 to 4 way) of dia 25 mm in repairs complete all as specified

R.K.ASSOCIATES (BID ID -3137573)

M/s DKS Engineering Works (BID ID -3148433)