Erection of 7 span, 6.6KV O/H Line from 2nd last DP near old sainik view point towards TSS-4201 for power supply of patch-A sump from existing 6.6 kv OHTL of Ashok sump OH line including painting of poles an Fixing of Danger Notice Board etc

Amount

Erection of steel tubular or rail pole strut in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size ) foundation including excavation and refilling and secured with holding clamps, bolts, nuts, etc. as required

Erection of all Aluminium conductor of 7/1.96mm to 7/3.1mm diameter including binding etc as required.

Supplying and erection of 11 KV disc insulator for 11 KV over head lines with galvanised insulator fittings, ball and socket type and complete with galvanised strain clamps, olts, nuts, washers etc

Supplying and erection of 11 KV pin insulator complete with large steel head G.I. pin, nuts, washers etc. as required

Supplying and erection of galvanised stay set for 11 KV overhead lines complete with 19/ 20 mm dia X 1.8 metres long stay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm thick, thimble, stay clamps, turn buckle ( 20 mm X 600 mm ), 7/ 4.00 mm dia G.I. stay wire and 11 KV strain insulator etc in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size ) foundation including excavation and refilling etc. as required.

Making of two lengths of channel iron 75 mm X 40 mm X 6 mm(7.14 kg per metre) double pole cross arm for three wire 11KV overhead line conductors complete with through bolts and nuts for clamping to the poles, 50 mm X 6 mm M.S. flats welded on one side to the channel iron and with bolts and nuts on the other side for tying the cross arms together, including drilling holes for insulator pins/ fittings, bolts, nuts and washers etc (as per drawing) and painting with primer and finish paint as required

Erection of double pole 3 wire cross arm for 11KV/ 22KV/ 33 KV over head lines as required

Supply of GI wire 8 SWG(Note-rate taken from 6 swg GI wire)

Erection of G.I. Wire No. 8 SWG including binding etc. as required

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 6.6 KV grade of following size in the existing masonry open duct as required.Above 120 sq. mm and upto 400 sq. mm

erection & making of a set of cradle guard bracket fram for 6.6 kv over head line having 2 nos febricated out of 65 mmx 65mmx6mm angle iron to make a cradle guard.erection & making of a set of cradle guard bracket fram for 6.6 kv over head line having 2 nos febricated out of 65 mmx 65mmx6mm angle iron to make a cradle guard.

Providing and fixing H.T. danger notice plate of 250 mm X 200 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.

Dismantling & fixing of 1 no GOAB switch & 1 No-Horn Gap fuse switch unite of 6.6 kv grade.Dismantaling & fixing of 1 no GOAB switch & 1 No-Horn Gap fuse switch unite of 6.6 kv grade.

Painting of poles

Total impact of GST for the purpose of CTC

M/S BABA & CO

M/S ELECTRO COOL

M/s KASHYAP ENTERPRISE