Loading
Loading…
Loading…
Tender Value
₹1.5 Cr
EMD Value
₹3.0 L
Closing Date
6 Oct 2026, 1:00 pm
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
TECHNICAL
14 conditions · 3 needing a document upload
Financial Eligibility Criteria: The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. Annual Contractual Turnover Data for the Previous 3/4 Years should be submitted as per Annexure-IX.(AnnexureVIB of Tender Documents)
Technical Eligibility Criteria: (a)The tenderer must have successfully completed any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or One similar work each costing not less than the amount equal to 60% of advertised value of the tender. (b) (i)In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed any of the following during last 07 seven) years, ending last day of month previous to the one in which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note for b(i): Separate completed works of minimum required values for each component shall also be considered for fulfillment of technical eligibility criteria. ( c) Similar nature of Work is defined as "Similar nature of Work is defined as "Supply, installation, testing and commissioning of any LT/HT Electrical Work. ." Note: Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of opening of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.
Similar nature of Work is defined as "Supply, installation, testing and commissioning of any LT/HT Electrical Work".
39 conditions · 9 needing a document upload
Check List: The tenderer(s) would fill up the check list, as per Annexure-XXIII to ensure that they are submitting the complete tender offer.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Improvement of electrical wiring of service buildings over TSK Division
LV-T-14-TSK-962~NFR
LV-T-14-TSK-962
Open
Works - General
15 Months
Tinsukia, Assam
₹0
₹3.0 L
15 Sept 2026
15 Sept 2026
22 Sept 2026
51 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 1,49,45,675.1 | ||
| — | 1143.00 | — | — | ||
| Supply, fitting, fixing, wiring, testing and commissioning of light point with 1.5 sq.mm FRLS/HFFR PVC insulated copper single-core cable drawn through surface/recessed medium-class PVC conduit, complete with modular switch, modular plate and suitable GI box, including all required conduit accessories, bends, junctions, clamps, screws and connections. Earthing shall be provided with 1.5 sq.mm FRLS/HFFR copper conductor, including all necessary materials, labour, testing and commissioning, as per site requirement and as directed by the Site In-charge, complete in all respects. | — | — | — | 13,59,027 | |
| — | 513.00 | — | — | ||
| Supply, fitting, fixing, wiring, testing and commissioning of fan/exhaust fan point with 1.5 sq.mm FRLS/HFFR PVC insulated copper single-core cable drawn through surface/recessed medium-class PVC conduit, complete with modular switch, modular plate, suitable GI box and fan regulator wherever required, including all necessary conduit accessories, bends, junctions, clamps, screws and connections. Earthing shall be provided with 1.5 sq.mm FRLS/HFFR copper conductor, including all necessary materials, labour, testing and commissioning, as per site requirement and as directed by the Site In-charge, complete in all respects. | — | — | — | 6,09,957 | |
| — | 574.00 | — | — | ||
| Supplying, fitting and fixing suitable size GI box with modular plate and cover, surface or recessed, complete with 3-pin 5/6A modular socket outlet and 5/6A modular switch, including point wiring with 2.5 sq.mm FRLS/HFFR PVC insulated copper single-core cable in surface/recessed medium-class PVC conduit, with 1.5 sq.mm FRLS/HFFR copper conductor for earthing, including all necessary conduit accessories, fittings, connections, testing and commissioning, as per site requirement and as directed by the Site In-charge, complete in all respects. | — | — | — | 3,12,830 | |
| — | 327.00 | — | — | ||
| Supplying, fitting and fixing suitable size GI box with modular plate and cover, surface or recessed, complete with 15/16A modular socket outlet and 15/16A modular switch, including point wiring with 4.0 sq.mm FRLS/HFFR PVC insulated copper single-core cable in suitable surface/recessed medium-class PVC conduit, with 4.0 sq.mm FRLS/HFFR single-core copper conductor in green for earth continuity, including all necessary conduit accessories, fittings, connections, testing and commissioning, as per site requirement and as directed by the Site In- charge, complete in all respects. | — | — | — | 3,37,464 | |
| — | 56.00 | — | — | ||
| Supply, fitting, fixing, wiring, testing and commissioning of AC point with 6.0 sq.mm FRLHS PVC insulated copper single-core cable laid in casing-capping or recessed through medium- class PVC conduit, complete with suitable MCB-protected power point unit 25 A and push starter, including 1.0 sq.mm FRLHS single-core copper conductor in green for earth continuity, all necessary conduit accessories, fittings, terminations, connections, testing and commissioning, as per site requirement and as directed by the Site In-charge, complete in all respects. | — | — | — | 1,01,360 | |
| — | 65.00 | — | — | ||
| Supply, fitting, fixing, wiring, testing and commissioning of call bell point with 1.5 sq.mm single-core multi-strand flexible copper cable laid through PVC conduit in casing- capping/surface or recessed, complete with modular switch, including 1.5 sq.mm copper conductor for earthing/earth continuity, all necessary conduit accessories, fittings, connections and labour, as per site requirement and as directed by the Site In-charge, complete in all respects. | — | — | — | 77,285 | |
| — | 175.00 | — | — | ||
| Supplying, fitting and fixing suitable size GI box with modular plate and cover, surface or recessed, complete with 2 nos. 3-pin 5/6A modular socket outlets and 2 nos. 5/6A modular switches, including computer point wiring with 1.5 sq.mm single-core multi-strand flexible copper cable through suitable PVC conduit, with 1.5 sq.mm copper conductor for earth continuity, including all necessary conduit accessories, fittings, connections, testing and commissioning, as per site requirement and as directed by the Site In-charge, complete in all respects. | — | — | — | 2,25,925 | |
| — | 2205.00 | — | — | ||
| Supply, laying , connection , testing and commissioning of LT XLPE Insulated, Cores Laid Up, PVC Inner sheathed, Armoured stranded aluminum conductor cable size 25 mm.sq. 4 core having Galvanized steel Strip, Extruded PVC Type ST2 Sheathed, 650/1100V Grade As Per IS 7098(Part 1) 1988.For laying of above cable digging of trench and excavation of earth/concrete to depth 0.75 Mtrs. and breadth 0.5 Mtrs. below the ground level and a layer of sand of 0.075 Mtrs. thickness shall be spread over the ground before laying the cable and the cable shall be covered with a layer of sand of 0.075 Mtrs. thickness. The bottom of cable trench shall be leveled and got rid of any sharp material. The cable route markers should be provided along the route of cables to indicate their presence so that damage/accident are Not caused by inadvertent digging.All conditions to be fulfilled as per DRG No : PCEE/ELG/DRG/2024/2 Dtd 04.10.2024. | — | — | — | 20,05,006.5 | |
| — | 1040.00 | — | — | ||
| Supply, laying , connection , testing and commissioning of LT XLPE Insulated, Cores Laid Up, PVC Inner sheathed, Armoured stranded aluminum conductor cable size 50 mm.sq. 4 core having Galvanized steel Strip, Extruded PVC Type ST2 Sheathed, 650/1100V Grade As Per IS 7098(Part 1) 1988.For laying of above cable digging of trench and excavation of earth/concrete to depth 0.75 Mtrs. and breadth 0.5 Mtrs. below the ground level and a layer of sand of 0.075 Mtrs. thickness shall be spread over the ground before laying the cable and the cable shall be covered with a layer of sand of 0.075 Mtrs. thickness. The bottom of cable trench shall be leveled and got rid of any sharp material. The cable route markers should be provided along the route of cables to indicate their presence so that damage/accident are Not caused by inadvertent digging.All conditions to be fulfilled as per DRG No : PCEE/ELG/DRG/2024/2 Dtd 04.10.2024. | — | — | — | 13,11,440 | |
| — | 990.00 | — | — | ||
| Supply, laying , connection , testing and commissioning of LT XLPE Insulated, Cores Laid Up, PVC Inner sheathed, Armoured stranded aluminum conductor cable size 70 mm.sq. 4 core having Galvanized steel Strip, Extruded PVC Type ST2 Sheathed, 650/1100V Grade As Per IS 7098(Part 1) 1988.For laying of above cable digging of trench and excavation of earth/concrete to depth 0.75 Mtrs. and breadth 0.5 Mtrs. below the ground level and a layer of sand of 0.075 Mtrs. thickness shall be spread over the ground before laying the cable and the cable shall be covered with a layer of sand of 0.075 Mtrs. thickness. The bottom of cable trench shall be leveled and got rid of any sharp material. The cable route markers should be provided along the route of cables to indicate their presence so that damage/accident are Not caused by inadvertent digging.All conditions to be fulfilled as per DRG No : PCEE/ELG/DRG/2024/2 Dtd 04.10.2024. | — | — | — | 13,34,520 | |
| — | 746.00 | — | — | ||
| Supply, laying and fixing of 50 mm dia GI pipe, including necessary GI bends, couplers and fittings, complete as required as per site condition and direction of the Site In-charge. | — | — | — | 5,25,184 | |
| — | 23.00 | — | — | ||
| Supply, fitting, fixing of 200 Amps outdoor type cable junction box, angle frame mounted, dust & vermin proof, complete with rain cap, aluminium basbar of suitable size for TPN, 200 Amps, 415 V made out of 16 SWG CRCA sheet duly painted, Cable Junction Box Size: (lxbxh=450x 450x600 mm). The base of the fedder pillar junction box to be provided with CC foundation of propotion 1:1.5:3( cement, sang,Chips) after connection of Ug cables. | — | — | — | 2,05,597 | |
| — | 100.00 | — | — | ||
| Supply, fitting, fixing, testing and commissioning of 15W surface-mounted LED panel light of size 170 x 170 x 35 mm / 18W recessed LED panel light of size 180 x 180 x 22 mm, as required, complete with suitable LED driver, mounting accessories and all necessary connections. The fitting shall have minimum luminous efficacy of 100 lm/W and impact resistance of minimum IK05, with suitable colour temperature and power factor, complete in all respects as per site requirement and as directed by the Site In-charge. | — | — | — | 2,50,000 | |
| — | 1043.00 | — | — | ||
| Supply, fitting, fixing, testing and commissioning of 40W LED tube light complete with suitable metal/FRP housing, LED driver, LED tube, tube holders, mounting clips, brackets and all necessary accessories. The fitting shall have minimum luminous efficacy of 100 lm/W, minimum power factor 0.90 and impact resistance of minimum IK05, with suitable colour temperature, and shall be complete with all required internal wiring, terminations and electrical connections. The item shall include transportation, installation, fixing, testing and commissioning, as per site requirement and as directed by the Site In-charge, complete in all respects. | — | — | — | 7,52,003 | |
| — | 8200.00 | — | — | ||
| Supply, laying, connection and testing of 1.5 sq.mm single-core multi-strand flexible copper cable, conforming to relevant IS specifications, including all necessary accessories and connections, complete as required as per site condition and direction of the Site In-charge. | — | — | — | 4,44,686 | |
| — | 9520.00 | — | — | ||
| Supply, laying, connection and testing of 2.5 sq.mm single-core multi-strand flexible copper cable, conforming to relevant IS specifications, including all necessary accessories and connections, complete as required as per site condition and direction of the Site In-charge. | — | — | — | 8,38,997.6 | |
| — | 5340.00 | — | — | ||
| Supply, laying, connection and testing of 4 sq.mm single-core multi-strand flexible copper cable, conforming to relevant IS specifications, including all necessary accessories and connections, complete as required as per site condition and direction of the Site In-charge. | — | — | — | 7,02,477 | |
| — | 3780.00 | — | — | ||
| Supply, laying, connection and testing of 6 sq.mm single-core multi-strand flexible copper cable, conforming to relevant IS specifications, including all necessary accessories and connections, complete as required as per site condition and direction of the Site In-charge. | — | — | — | 7,59,213 | |
| — | 65.00 | — | — | ||
| Erection of earth by 50 mm dia 3 Mtrs. long (3.6 mm thickness) GI pipe , 8 SWG GI wire,GI nuts, bolts including masonry materials for earthing pit, salt, charcoal etc. and construction of earth pit covered with RCC cover slab 12.7 mm thickness and watering pipe per Drawing No PCEE/ELG/DRG/2024/1 Dtd 30.09.2024 | — | — | — | 2,69,295 | |
| — | 2895.00 | — | — | ||
| Supply, fitting and fixing of 32 mm dia medium-class PVC conduit in surface/recessed installation, complete with all necessary accessories, bends, couplers, junctions, saddles and fittings, including cutting/chasing of wall wherever required, as per site condition and direction of the Site In- charge, complete in all respects. | — | — | — | 6,05,055 | |
| — | 21.00 | — | — | ||
| Supply, fitting and fixing of VTPN MCB Distribution Board complete with 100A, 4-Pole MCCB as incomer, having minimum 25 kA breaking capacity, and outgoing 32A DP MCB - 4 Nos. and 10A SP MCB - 4 Nos., having minimum 10 kA breaking capacity, complete with busbars, neutral link, earth bar, internal wiring, shrouds, labels and all necessary accessories, as per site requirement and as directed by the Site In-charge, complete in all respects. | — | — | — | 7,41,090 | |
| — | 76.00 | — | — | ||
| Supply, fitting and fixing of 300 mm sweep louver type exhaust fan, complete with suitable motor, louver, mounting accessories and necessary electrical connections, as per site requirement and as directed by the Site In-charge, complete in all respects. | — | — | — | 1,11,948 | |
| — | 45.00 | — | — | ||
| Supply, fitting and fixing of 12-way MCB Distribution Board complete with 63A, 4-Pole MCB as incomer, 32A DP MCB - 2 Nos. and 16A SP MCB - 4 Nos., with minimum 10 kA breaking capacity, complete with suitable busbars, neutral link, earth bar, internal wiring and all necessary accessories, as per site requirement and as directed by the Site In-charge, complete in all respects. | — | — | — | 4,81,950 | |
| — | 42.00 | — | — | ||
| Supply, fitting and fixing of 8-way MCB Distribution Board complete with 25A DP MCB as incomer, 16A DP MCB - 1 No. and 16A SP MCB - 4 Nos., having minimum 10 kA breaking capacity, complete with busbars, neutral link, earth bar, internal wiring and all necessary accessories, as per site requirement and as directed by the Site In-charge, complete in all respects. | — | — | — | 2,79,300 | |
| — | 87.00 | — | — | ||
| Supply, fitting and fixing of IP65 Hensel-type junction box, suitable for jointing 25 sq.mm, 4-core cable incoming/outgoing, complete with suitable cable glands, connectors/terminals and necessary accessories, as required as per site condition and direction of the Site In-charge, complete in all respects. | — | — | — | 3,04,065 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
TenderDocument962.pdf
ATTACHMENT
AnnexuresSectionVII.pdf
ATTACHMENT
GCCAPRIL2022WITHALLACS.pdf GCC 2022 WITH ACS
ATTACHMENT
GCCAPRIL2022WITHALLACS.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .