Miscellaneous Civil Works for Operationalization of New Terminal Building at RVST Gwalior

Amount

Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge. All kinds of soil

Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. All kinds of soil

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

Providing and erecting 2.00 metre high temporary barricading at site; each panel of size 2.50mx2.00m made of 40x40x6mm angle iron or 50x50x3mm hollow MS tube posts/horizontal members/bracings covered with 1.63mm thick MS sheet. The sheet shall be fixed with 30x5mm MS flat by suitable welding/riveting. The panels shall be made so that gap of 50cm above the ground is available making overall height as 2.5m. MS channel ISLC 75 @ 5.70 kg/m, 50cm long shall be provided at the bottom having oval shaped holes of size 50x25mm at both ends with 50cm long MS angle 40x40x6mm bracing. Suitable arrangement shall be made to fix the barricading to avoid from overturning by providing 250mm long expansion fasteners at both ends. The work shall be executed as per drawing/direction of Engineer-in-Charge which includes writing and painting, arrangement for traffic diversion such as traffic signals during construction at site for day and night, glow lamps, reflective signs, marking, flags, caution tape as directed by the Engineer-in-Charge. The barricading provided shall be retained in position at site continuously i/c shifting of barricading from one location to another location as many times as required during the execution of the entire work till its completion. Rate include its maintenance for damages, painting, all incidentals, labour materials, equipments and works required to execute the job. The barricading shall not be removed without prior approval of Engineerin- Charge. (Note :- One time payment shall be made for providing barricading from start of work till completion of work i/c shifting. The barricading provided shall remain to be the property of the contractor on completion of the work)

Providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, upto 25 metre height, above ground level, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40mm dia M.S. tube, placed 1.5 metre centre to centre, horizontal & vertical tubes joint with cup & lock system with M.S. Tubes, M.S. tube challis, M.S. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work of cleaning and/ or pointing and/ or applying chemical and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc., complete as per directions and approval of Engineer-in-charge. Note:- (1) The elevational area of the scaffolding shall be measured for payment purpose. (2) The payment will be made once only for execution of all items for such works

Providing and laying Autoclaved Aerated concrete (AAC) blocks masonry with 150mm/230mm/300 mm thick with Grade-I AAC blocks of density 551 to 650 kg/ cum conforming to IS: 2185 (Part 3) in super structure above plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-Charge. (The payment of RCC band and reinforcement shall be made for seperately)

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). Second class teak wood

Melamine polishing on wood work (one or more coat).

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size).

Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick With ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws

Extra for Providing and fixing flush doors with decorative veneering instead of non decorative ISI marked flush door shutters conforming to IS: 2202 (Part I) On one side only

Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured).

Providing and fixing Pre-laminated flat pressed 3 layer (medium density) particle board or graded wood particle board IS : 3087 marked, with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS : 12823 marked, in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately). 25 mm thick

Providing and fixing plywood 4 mm thick, one side decorative veneer conforming to IS: 1328 (type-1), for plain lining / cladding with necessary screws, including priming coat on unexposed surface with : Decorative veneer facings of approved manufacture

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent

Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick

Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only. Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Double charge vitrified tile polished finish of size, Size of Tile 600 x 600 mm

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only. Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Glazed Vitrified tiles Matt/Antiskid finish of size, Size of Tile 600 x 600 mm

Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade(0.10 kg of hardener and 0.20 kg of resin per kg), including filling/grouting and finishing complete as per direction of Engineer-in-charge. Size of Tile 600x600 mm

Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete

Wall painting with acrylic plastic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work

Texture Paint (OIKOS or of approved code by EIC) Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm

Providing and applying two coats of fire retardant paint on cleaned wood / ply surface @ 3.5 sqm per litre per coat including preparation of base surface as per recommendations of manufacturer to make the surface fire retardant.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture

Finishing walls with water proofing cement paint of required shade: New work (Two or more coats applied @ 3.84 kg/10 sqm)

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (two or more coats) over and including water thinnable priming coat with cement primer

Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete: On steel work

Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete: On concrete work

52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacturer's specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete.

12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand)

6 mm cement plaster of mix : 1:3 (1 cement : 3 fine sand)

18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster 1:6 (1 cement : 6 fine sand).

Providing and laying Gypsum panel partitions 100 mm thick with water proof Gypsum panels of size 666x500x100 mm, made of calcite phosphor Gypsum fixed with tongue and groove, jointed with bonding plaster as per manufacturer’s specifications in superstructure above plinth level up to floor V level. Gypsum blocks will have a minimum compressive strength of 9.3 kg/cm2

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

Providing and fixing fire resistant door frame of section 143 x 57 mm having built in rebate made out of 16 SWG G.I. sheet (zinc coating not less than 120 gm/sqm) duly filled with vermuculite based concrete mix, suitable for mounting 60 minutes fire rated door shutters. The frame is fitted with intumuscent fire seal strip of size 10x4 mm (minimum) alround the frame and fixing with dash fastener of approved size and make, including applying a coat of approved brand fire resistant primer etc. complete as per direction of Engineer-in-charge (Dash fastener to be paid for separately).

Providing and fixing 50 mm thick glazed fire resistant door shutters of 60 minutes fire rating conforming to IS:3614 (Part-II), tested and certified as per laboratory approved by Engineer-in-charge, with suitable mounting on door frame, consisting of vertical styles, lock rail, top rail 100 mm wide, bottom rail 200 mm wide, made out of 16 SWG G.I.sheet (zinc coating not less than 120 gm/m2) duly filled FR insulation material and fixing with necessary stainless steel ball bearing hinges of approved make, including applying a coat of approved fire resistant primer etc. all complete as per direction of Engineer-in-charge (panneling to be paid for separately).

Providing and fixing glazing in fire resistant door shutters, fixed panels & partitions etc., with G.I. beading made out of 1.6 mm thick G.I. sheet (zinc coating not less than 120 gm/m²) of size 20 x 33 mm screwed with M4 x 38 mm SS screws at distance 75 mm from the edges and 150 mm c/c , including applying a coat of approved fire resistant primer/ powder coating of not less than 30 micron on G.I. beading, & special ceramic tape of 5 x 20 mm size etc complete in all respect as per NBC 2016, IS 16231 (Part 3):2016 and as per direction of Engineer-in-charge with glass of required thickness having 60 minutes of fire resistance both integrity & radiation control (EW60) and minimum 20 minutes of insulation (EI20). The manufacturer have to give test report/certification of fire glass and the glass should have the stamp showing the value of E, EW & EI. The glass shall be tested in approved NABL accredited lab or by any other accreditation body which operates in accordance with ISO/IEC 17011 and accredits labs as per ISO/IEC 17025 for testing and calibration scopes shall be eligible. The maximum glazing size shall not be more than 1100x2200 mm (w x h) or 2.42 sqm.

Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment). Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Extra for providing and fixing steel beading of size 10 x 10 x 1.6 mm (box type), approved shape and section with screws instead of glazing clips and metal sash putty, in steel doors, windows, ventilators and composite units

Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top cover

Providing and fixing ball bearing for rolling shutters.

Extra for providing mechanical device chain and crank operation for operating rolling shutters. Exceeding 10.00 sqm and upto 16.80 sqm in the area

Extra for providing grilled rolling shutters manufactured out of 8 mm dia M.S. bar instead of laths as per design approved by Engineer-in- charge, (area of grill to be measured).

Providing & fixing in position Phenol bonded Bamboowood flooring with planks of sizes 14mm thick, 1800mm length (minimum) and 130 mm wide(minimum), in approved colour, texture and finish, having Performance Appraisal Certificate (PAC) issued by Building Materials & Technology Promotion Council (BMTPC). The flooring shall be fixed with tongue and groove interlocking system, with underlayment of 4mm thick expanded polyethylene foam sheets having density 40kg/cum, over prepared surface with necessary quarter round planks of size 1900mm x 18mm and door reducer of size 1900mm x 44mm, wherever required. The bamboowood planks shall have minimum density of 1000 Kg/cum & minimum Hardness 1000 Kgf. with Eco friendly UV coating, all complete as per direction of the Engineer in-charge.

Providing & fixing in position Phenol bonded Bamboowood in wall skirting with planks of sizes 14mm thick, 1900mm length (minimum) and 85mm wide(minimum), in approved colour, texture and finish, having Performance Appraisal Certificate (PAC) issued by Building Materials & Technology Promotion Council (BMTPC). The skirting shall be fixed with SS screws & rawl plugs, over underlayment of 4mm thick, expanded polyethylene foam sheets having 40kg/cum density over prepared surface. The bamboowood planks shall have minimum density of 1000Kg/cum & minimum Hardness 1000 Kgf. with Eco friendly UV coating, all complete as per direction of the Engineer in-charge.

Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. 12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit.

Providing & fixing in position Phenol bonded Bamboowood wall cladding at all height with planks of sizes 10mm thick, 1800mm length (minimum) and 130 mm wide (minimum), in approved colour, texture and finish, having Performance Appraisal Certificate (PAC) issued by Building Materials & Technology Promotion Council (BMTPC), with necesasary profiled edges fixed with 40mm SS screws 5 nos in each tile to frame work made of second class teak wood of size 20x15 mm in centre of each tile and bottom and top of work height, 40x15mm placed at ends of each tile. The cladding shall be laid over backlayment of 1.00 mm thick expanded poly ethylene foam of density 40kg/cum in two layers, first layer on wall surface before fixing wooden frame and second layer on frame under cladding. The bomboo wood planks shall have minimum density of 1000 Kg/cum & minimum Hardness 1000 Kgf. with Eco friendly UV coating, all complete as per direction of the Engineer in-charge.

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead :Of area beyond 3 sq. metres and below

Providing & fixing in position Phenol bonded Bamboowood panelled or panelled and glazed shutters for doors windows, clerestorey windows with pre-molded 30mm thick planks, in approved colours, texture & finishe. It shall have 10mm wide, 25mm deep grove to fit in panels.The bamboo wood shall have minimum density of 1000 Kg/ cum, minimum Hardness 1000 Kgf. All styles and rails shall have profiled interlocking system locked in place by bamboo pins, all complete as per direction of Engineer in charge. (The panelling will be paid for separately).

Providing & fixing in position Phenol bonded Bamboowood panelling of 10mm thick, in 25 to 40 mm thick panelled or panelled & glazed shutters for doors, windows, clerestorey windows, in approved colour, texture & finish. The bamboowood planks shall have minimum density of 1000 Kg/cum & minimum Hardness 1000 Kgf. The panels shall have profiled interlocking system locked in place with bamboo pins all complete as per direction of the Engineer in-charge. (area of opening for panel inserts excluding portion inside grooves or rebates to be measured)

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm.

Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead.

Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing.This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20 mm nominal outer dia Pipes

Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length 15 mm nominal bore

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5.00 mm thickness

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 metre height, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement: 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement: 2 stone dust) with an admixture of pigment matching the stone shade: (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately) : White sand stone/Dholpur/Gwalior - Exposed face machine cut and table rubbed with rough backing 50 mm thick

Providing and laying machine cut, mirror polished Marble stone flooring, in required design (Simple geometrical, abstract etc.) and in patterns in combination with Italian marble stones of different colours, shades and finished surface texture etc., in linear portions of the building, all complete as per the architectural drawings, with 18 mm thick stone slab laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with white cement slurry @ 4.4 kg/sqm including pointing with white cement slurry admixed with pigment to match the marble shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. 18 mm thick Italian Marble stone slab, Perlato, Rosso verona, Fire Red or Dark Emperadore etc.

Providing and fixing machine cut, mirror/ eggshell polished , Marble stone work for wall lining (veneer work) including dado, skirting, risers of steps etc., in required design and pattern wherever required, stones of different finished surface texture, on 12 mm (average) thick cement mortar 1:3 (1 cement : 3 coarse sand) laid and jointed with white cement slurry @ 3.3 kg/sqm including pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing, polishing etc. all complete as per Architectural drawings, and as directed by the Engineer-in-Charge: 18 mm thick Italian Marble stone slab,Perlato, Rosso verona, Fire Red or Dark Emperadore etc.

Providing and fixing stainless steel cramps of required size and shape for anchoring stone wall lining to the backing or securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement : 2 coarse sand), including making the necessary chases in stone and holes in walls wherever required.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

Centering and shuttering including strutting, propping etc. and removal of form for all heights : Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

Centering and shuttering including strutting, propping etc. and removal of form for all heights : Lintels, beams, plinth beams, girders, bressumers and cantilevers

Centering and shuttering including strutting, propping etc. and removal of form for all heights : Columns, Pillars, Piers, Abutments, Posts and Struts

Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc., including cost of de-shuttering and decentering at all levels, over a height of 3.5 m, for every additional height of 1 metre or part thereof (Plan area to be measured).s :Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc., including cost of de-shuttering and decentering at all levels, over a height of 3.5 m, for every additional height of 1 metre or part thereof (Plan area to be measured).

Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 1.10 times of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. All works above plinth level upto floor V level Concrete of M25 grade with minimum cement content of 330 kg /cum

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand)

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor Cement mortar 1:4 (1 cement :4 coarse sand)

Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge: With material conforming to Grade-I (size range 75 mm to 0.075 mm) having CBR Value-30

Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM) specification including premixing the material with water at OMC in for all leads & lifts, laying in uniform layers with mechanical paverfinisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achievethe desired density, complete as per specifications and directions of Engineer-in-Charge.

Construction of dry lean cement concrete sub base over a prepared sub-grade with coarse and fine aggregate conforming to IS:383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per specifications, cement content not to be less than 150 Kg/cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant, transported to site, for all leads & lifts, laid with a mechanical paver, compacting with 8-10 tonne vibratory roller, finishing and curing etc. complete as per direction of Engineerin- charge.

Providing and laying design mix cement concrete of M-30 grade, in roads/ taxi tracks/ runways, using cement content as per design mix, using coarse sand and graded stone aggregate of 40 mm nominal size in appropriate proportions as per approved & specified design criteria, providing dowel bars with sleeve/ tie bars wherever required, laying at site, spreading and compacting mechanically by using needle and surface vibrators, levelling to required slope/ camber finishing with required texture, including steel form work with sturdy M.S. channel sections, curing, making provision for contraction/ expansion, construction & longitudinal joints (10 mm wide x 50 mm deep) by groove cutting machine, providing and filling joints with approved joint filler and sealants, complete all as per direction of Engineer-in-charge (Item of joint fillers, sealants, dowel bars with sleeve/ tie bars to be paid separately). Note:- Cement content considered in M-30 is @ 340 kg/cum. Excess/ less cement used as per design mix is payable/ recoverable separately. Cement concrete manufactured in automatic batching plant (RMC plant) i/c transportation to site in transit mixer

Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. 80 mm thick C.C. paver block of M-30 grade with approved color design and pattern.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and .bolted with special shaped washers etc. complete Hot finished seamless type tubes

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron)

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately :Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron)

Supplying and applying water based Fire intumescent paint fire tested in accordance with BS 476 Parts 20-22 as approved make @ DFT dependent on HP/a ratio of structural steel with zinc phosphate primer to give additional anti-corrosive protection having VS of 73% - 83% as approved applied over abrasive blasted surface and surface preparation up to a standard of Sa2.5 (ISO 8501-1:1988) or SSPC-SP6 at 75 micron and LEED V4 Compliant for VOC Content and VOC Emissions polyurethane finish paint as approved having volume solid of 72% - 73% @ 75 micron of the required shade over Structural Steel Works at all levels including storage, surface preparation by sand blasting, degreasing, cleaning, drying, providing temporary staging, scaffolding, testing etc., all complete with all respect as desired and as per manufacturer specification and direction of Engineer in charge. The above products should confirm to Green Building norms. Application to be carried out by authorized manufacturer applicator or any other trained applicator as approved by the manufacturer and direction of Engineer in charge. For Two hrs fire rating

Provision of Aluminium 65/400 Straight profile sheeting manufactured from aluminium self- supported standing seam roof system from aluminium alloy AA 3004 H44 (AlMn1Mg1) as specified in BS EN 1396: 2007 minimum material thickness of min 0.9 mm (as per design calculation) and PVDF2 finish (standard colours) on the exposed surface. The profiled roof panel should have 3 Nos of Mini ribs along with required Accessories, Fasteners. The material properties shall be as follows: Ultimate tensile strength: minimum 200 N/mm2, 0.2% Proof Stress: min 185 N/mm2, Modulus of elasticity: 70,000 N/mm2. Sheets are to be laid to meet the requirements of the building geometry and fixed on Aluminium Halters/Clips. Halters/Clips to be fixed to the top hat/purlins with SS 304 screws. The roofing system provider should have Factory Mutual (FM-4471) or UL Certification (UL-90). All installation is to be carried out by approved trained roofing installer and direction of EIC.

Providing and Fixing of Multi cell Polycarbonate Panels 22mm thick with 5 cells - 6 walls structure over MS Supporting structures all as per technical specifications as directed by the EIC. 1) Panel Width shall be (600-1200) mm 2) The panels shall be uniform in color with an integral core with soft lite/antiglare finish to give diffused light 3) Panels shall be co-extruded with UV Protection layers to filter harmful UV rays 4) The weight of the panel only shall not be less than 3800 gram per square meter 5) Panel shall have U value not more than 1.5 W/m2 k and UV transmission less than 0.1% with UV filtration test AS No.1067-1990 or equivalent standards in India.

Providing and fixing Zinc Titanium flat lock cladding system (thickness: 0.8 mm)) consisting of fixing clips made of galvanized steel to connect the zinc titanium panel to the liner sheet all as per technical specifications as directed by the EIC. Comprising of the following layers: 1. Top Layer – Pigmento Red Zinc titanium profiled sheeting manufactured from Zinc titanium alloy ZnTiCu as specified in EN 988, minimum thickness of 0.8 mm along with Fixing Clips / Strips. Zinc titanium when used for Bull Nose application shall have a transparent primer over the pre weathered surface The material properties shall be as follows: Ultimate tensile strength: minimum 150 N/mm2,0.2% Proof Stress: min 100 N/mm2, The transparent primer serves as an adhesive layer and improves corrosion protection. Primer is 15 micrometers thick. It will also have 20 micrometers of highquality poly urethane transparent resin. This primer & resin is mandatory for zinc titanium sheet being used in Bull Nose / celling areas Normal Zinc titanium sheets without this primer/ resin shall not be acceptable as it can lead to white rust of zinc titanium in marine environment. Zinc titanium Panels shall be fixed to substructure using flat lock clips & strips made of Stainless Steel 304 & HDG screws/ Rivets. All installation is to be carried out by approved trained roofing installer. The installation team shall be fully trained and approved by the manufacturer. 2. Anti-Abrasive Synthetic Membrane: Anti abrasive Membrane made of High-density polyethylene film. Membrane shall be 0.6 mm thick with space of 8.6 mm spaced at 19.5 mm. It should have compression resistance of 250kN/m2. Fire resistance rating: class Β2 according to DIN 4102 3. 0.47mm TCT Hi-Tensile steel sheets profile with nominal 3.5 mm deep ribs at pitch of nominal 50.5 mm center to center distance 550 MPa Yield Strength

Providing & fixing in position 4mm thick Zinc composite panels in external face, column/wall cladding and canopy ceiling of approved make conforming to ASTM standard /specifications comprising of 3mm thick FR grade mineral Core all as per technical specifications as directed by the EIC. The ZCP product must conform to EN 13501 class B s1 d0 and two hour fire resistance as per ASTM E119. The joints shall be properly sealed with approved Silicon sealant / open groove as per approved details including, fixing over MS frame using mechanical fasteners such as cleats / fasteners.

Supplying and installing in position Laminated toughened glass panels in SS railing comprising of multiple panels of 5mm thick clear toughened glasses + 1.52 PVB film +5mm thick clear toughened glasses and fixed to the vertical balusters with glass clamping discs all as per technical specifications and be in brush finish or as approved by Engineer-In-Charge. Glass railing shall be of equal panels in each flight or as shown in the drawing and all visible edges of the glass shall be machine polished

Providing, supplying and fixing of Frameless Single leaf Swing Glass Door of in glazing using 12mm thick toughened glass with die cast patch fitting with stainless steel cover including fixing of patch fittings, floor springs, locks, handles etc. using the hardware items as detailed, complete in all respects as per detailed drawings, specifications and direction of Engineer in charge. Single Leaf Door with Hardware’s as specified: - Swing Glass Door which includes each of Top Pivot, Bottom Patch, Top Patch, Floor Lock, Strike Plate, Floor Spring, or any other L patch as per site requirement L patch or any other patch pair, with pair of SS Pull Handle 25 mm dia x 450 mm long and other accessories for self-closing feature as per detailed drawings, Technical specifications and instructions of Engineer- in-Charge.

FRAMELESS DOUBLE LEAF SWING GLASS DOOR Supply & Installation of glass doors Providing, supplying and fixing of Frameless Double Leaf Swing Glass Door make in glazing using 12mm thick toughened glass with die cast patch fitting with stainless steel cover including fixing of patch fittings, floor springs, locks, handles etc. using the hardware items as detailed, complete in all respects as per detailed drawings, manufacturers specifications and direction of Engineer in charge. Double Leaf Door with Hardware’s as specified:- Swing Glass Door which includes One nos of Top Pivot, Bottom Patch, Top Patch, Floor Lock, Strike Plate , Floor Spring, or any patch as per site requirement with pair of SS Pull Handle 25 mm dia x 450 mm long and other accessories for self closing feature Double door with fan light and side panels consists of the following: a) 2 Set Glass door over/side panel fitting, with pivot and satin SS covers. b) 2 Set Top patch fitting with pivot bearing location, with satin SS covers. c) 2 Set Bottom patch fitting with pivot bearing for floor spring, with satin SS covers. d) 2 Set Floors lock with strike plate and Euro Profile cylinder. e) 2 Set Floor Spring f) 2 Set Back to Back SS Pull Handle 450mm x 22mm diameter.

Provide continuous type pressed metal frames (Exterior / interior Frames: 1.6 / 1.2 mm thick sheet respectively), including glazing stops and reinforcement, of various profiles to suit conditions detailed on the drawings and be constructed of new prime quality, Galvanized sheet steel. All frames shall be fabricated from zinc-coated sheet chemically treated after fabrication for optimum paint adhesion as per Technical specifications and directions of Engineer-in-charge.

Providing, fixing and fabricating interior full flush hollow metal doors of 2 outer sheets, 0.8mm (22guage) thick galvanized sheet steel, free from rust, scale, pits and surface defects. Unless otherwise indicated on Drawings, hollow metal door thickness shall be minimum 46mm all as per Technical specifications and directions of Engineer-in-charge.

Providing, fixing and fabricating exterior full flush hollow metal doors of 2 outer sheets, 1.2mm (18guage) thick galvanised steel sheet. Unless otherwise indicated on Drawings, hollow metal door thickness shall be 46mm all as per Technical specifications and directions of Engineer-in-charge.

Providing and fixing Panic Exit Device – Single / Double leaf of SS 316 grade & confirming to CE & EN 1154 and B.S. – 476, Part- 22, two hours fire rated as per directions of Engineer-in-charge.

Providing and fixing Mortice Lock with lever handle of SS 316 grade of Euro-Profile (PZ) type to suit cylinder locks, unless otherwise indicated on the design drawings, or as specified & confirming to CE & EN 122090/ DIN 18251 and B.S.-476, Part-22 , two hours fire rated as per directions of Engineer-in-charge.

Providing and fixing cylinder locks of Euro-Profile (PZ) type unless otherwise indicated on the design drawings, or as specified & confirming to BS EN 1303 and/or DIN 18254 as per Technical specifications and directions of Engineer-in-charge.

Providing and fixing Stainless steel SS 316 grade ball bearing hinges on each side of Steel Fire door shutters size 100 mm x 100 mm x 3 mm with screws etc. complete as per directions of Engineer-in-charge.

Providing and fixing floor spring and all its components in SS 316 grade, shall be manufactured to BS EN 1154, BS 6459 and BS 5750 and be of suitable capacity for its intended purpose etc. complete as per directions of Engineer-in-charge.

Providing and fixing Overhead door closers and all of their components in SS 316 grade, shall be manufactured to BS EN 1154, BS 6459 & BS 5750 and be suitable for their intended purpose etc. complete as per directions of Engineer-in-charge.

Providing and fixin floor mounted Door stops of semi-dome type with shielded base of 50 x 45mm and projection of 25mm to the rubber door buffer insert, unless otherwise indicated on the design drawings etc. complete as per directions of Engineer-in-charge. The door stop finish shall match the door furniture and/or other DOOR HARDWARE finishes.

Providing and fixing Lever action flush bolts of min. size 152 x 19mm to BS EN 12051 on the dead leaf, at top and bottom of the inside rebated edge, on all double leaf doors and windows as per directions of Engineer-in-charge. The bolt finish shall match the door furniture and/or other DOOR HARDWARE finishes.

Providing and fixing Floor bolt sockets corresponding size of the lever action bottom shoot bolt diameter setting into the floor finish as per directions of Engineer-in-charge. The Floor bolt sockets finish shall match the door furniture and/or other DOOR HARDWARE finishes.

Providing and laying Vitrified Homogenous 20mm Thick Heavy duty Unglazed, Uncoated, Metal Pressed Tiles having Smooth Surface of given sizes with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints with epoxy grout. Size of tiles 600x600mm

Supply of torsion spring Tile Ceiling System manufactured by comprising of Tile of 600mm wide and length 1200mm manufactured out of 0.7 mm thick Aluminium with perforations and pasted with NWT. With 20% open area. The metal ceiling panels shall be downward accessible with a minimum of four (4) torsion springs per panel. The Tile will be manufactured on advanced CAD/CAM equipment that includes several levelling stages in the manufacturing process. Torsion Spring panel with two side legs die formed and two end legs die formed and punched to receive torsion springs (min two springs each end or side) for secure engagement into Tee Grid main runners which are factory punched to receive torsion springs. Tiles will be square edged. The metal ceiling panels shall be downward accessible with a minimum of four (4) torsion springs per panel. The Tile shall be Polyester powder coated in wooden finish colour. The panel will be installed on a rigid MS Substructure which shall be paid separately as an individual item. Main Runners: 24mm deep, inverted “Tee” sections, 3.6m long, with factory punched flanges to receive torsion spring assembly. Main Tee on center spacing to match panel length. Cross Runners: 24 mm deep, inverted “Tee” sections designed to interlock in to web of main tee section on designated spacing. Cross tee length to match panel length. Cross tees are spaced spacing 1200mm on center maximum. Paint finish –The panels will be pre-treated in latest nano technology process and electro statically powder coated with automatic Carona system and cured with gas catalytic technology. Acoustic Felt (Optional): Non-woven felt made of glass-reinforced fibre glued over the perforation for sound absorption. NRC- 0.7 & 0.45.

Torsion Spring, Aluminium, Perforated, Powder Coated tile Ceiling System: Supply of torsion spring Tile Ceiling System manufactured by comprising of Tile of 600mm wide and length 600mm manufactured out of 0.7 mm thick Aluminium with perforations and pasted with NWT. With 20% open area. The metal ceiling panels shall be downward accessible with a minimum of four (4) torsion springs per panel. The Tile will be manufactured on advanced CAD/CAM equipment that includes several levelling stages in the manufacturing process. Torsion Spring panel with two side legs die formed and two end legs die formed and punched to receive torsion springs (min two springs each end or side) for secure engagement into Tee Grid main runners which are factory punched to receive torsion springs. Tiles will be square edged. The metal ceiling panels shall be downward accessible with a minimum of four (4) torsion springs per panel. The Tile shall be Polyester powder coated in wooden finish colour. The panel will be installed on a rigid MS Substructure which shall be paid separately as an individual item. Main Runners: 24mm deep, inverted “Tee” sections, 3.6m long, with factory punched flanges to receive torsion spring assembly. Main Tee on center spacing to match panel length. Cross Runners: 24 mm deep, inverted “Tee” sections designed to interlock in to web of main tee section on designated spacing. Cross tee length to match panel length. Cross tees are spaced spacing 1200mm on center maximum. Paint finish –The panels will be pretreated in latest nano technology process and electro statically powder coated with automatic Carona system and cured with gas catalytic technology. Acoustic Felt (Optional): Non-woven felt made of glass-reinforced fibre glued over the perforation for sound absorption. NRC- 0.7 & 0.45

Providing & Fixing of 300mm wide perforated 2.0 mm diameter 5mm c/c pasted with NWT corrosion resistant Aluminium Magnesium Alloy metal ceiling consisting of panel 300m wide x 30 mm deep x 0.7 mm thick with bevel edge having panel length up to 6 mtrs. coil coated on a continuous paint line, Double baked and roll formed for higher straight and good roll forming characteristics with 21% perforation in White finish color. The panel ends are raised up to 29 mm. The panel about each other with a narrow V groove. Panel shall be clipped to a backed enamelled aluminium panel carrier of 41.5 mm wide x 62 mm deep x 0.95 mm thick in standard length of 5 mtrs. made of double baked enamelled aluminium magnesium alloy AA5052 black with cut outs to hold panels module of 300 mm and at distance of 2.4 mtrs. the carrier shall be suspended by means of GI suspension rod 4mm diameter and suspension clip at 1.3 mtr. distance. The coils to go through 4 stages of pre-treatment, three times oven baked through conversion coating, priming and finish coat ensuring superior adhesion, high corrosion resistance and good colour stability. The coils to be painted on both sides after degreasing. Inside surface to have a primer of 5 microns and a coat of natural colour of 5 microns, exposed surface to have a primer of 5 microns, binder of 5 microns and topcoat of approved colour of 15 microns. If any MS Sub structure is required, it shall be paid separately in the respective individual item. Paint finish: The coils to go through 4 stages of pre-treatment, three times oven baked through conversion coating, priming and finish coat ensuring superior adhesion, high corrosion resistance and good colour stability. The coils to be painted on both sides after degreasing. Inside surface to have a primer of 5 microns and a coat of natural colour of 5 microns, exposed surface to have a primer of 5 microns, binder of 5 microns and topcoat of approved colour of 15 microns. Green-pro certification: For LEED certification by Indian Green Building Council (IGBC) and ISO 9001: 2015 Quality Management System Certification

Providing and fixing Honeycomb panels of 12mm thickness with honeycomb consisting of two skins of flat smooth Aluminum alloy AA3005, with an outer skin thickness of 0.7 mm and inner skin thickness of 0.5mm. The panel should be Tested for Seismic Zone III compliance as per IS 1893 part 1-2016. Panel shall be factory manufactured to the required width subject to a maximum width of 1500mm and to the required lengths subject to maximum of 4500 mm and shall essentially have each 12mm thick panel with panel edges on all four sides closed. The Honeycomb panels shall be roll formed and high pressure pressed in controlled factory conditions with two part high temperature cured PU glue and with two consisting of aluminum skins and using a pre-treated corrosion resistant core of honeycomb Aluminium having a core diameter of 19mm and foil thickness of 0.076 mm. The 25mm thick panel will be finished on the exterior exposed surface with coil coated finish, and on the inner surface with primer coating. The 12mm thick panels shall be secured to the aluminum support/ sub structure erected along the panel lengths vertically consisting L angles 40X40X2 self-anodized finished to 15 microns and erected within the tolerances of +/ - span/1000 of plumb line and level with a non-cumulative tolerance of a maximum of 2mm Aluminium alloy for substructure will comply with ISO 6063. The substructure will be fixed to the support wall by means of 40X40X2 mm – angular Aluminium brackets with wedge type/ RAWL PLUG stainless steel anchor fastener/ HILTI or equivalent chemical fastener. The brackets will allow for a vertical and horizontal alignment tolerance of +/- 12,5mm. The panels shall be secured to the above support allowing for expansion by means of a fixing side extrusion pop riveted to the outer and inner skin and shall be fixed with aluminium “W” clamp at a distance of 150mm at panel ends and 600 – 750 mm c/c based on each panel length. The 15mm wide joint shall be covered and finished with a 10mm wide metal cover extrusion coated to the same colour, press fit to two-spring clip fixed on each “W” clamp as per Fixing detail. The Vertical joints shall have a cover profile joint of standard width of 15mm finished with 10mm metal cover and will incorporate facilities for allowing adjustment of +/- 1mm. The panel shall not be fixed in the width direction and shall allow for expansion. ASTM E 84 Standard test method for surface burning characteristics of building materials. BS 476-Part 6 Fire tests on building materials and structures. Method of test for fire propagation. BS 476-Part 7 Fire tests on building materials and structures. Method of test to determine the classification of the surface spread of flame of products.BS 476 (Part6 and Part7) (To meet the class 0 national building regulation) EN 13501-1 reaction to fire classification procedure along with NFPA 285 real time test. Green-pro certification: For LEED certification by Indian Green Building Council (IGBC) and ISO 9001: 2015 Quality Management System Certification.

Providing Baffle Aluminium panel ceiling of approved colour consisting of panel size 150 mm deep X 50 mm width using 0.6mm thick, panel length of 5 mtr or as per design. Coil Coated / Powder Coted on a Continuous Paint Line, Double baked and roll formed from enamelled corrosion resistance Aluminium alloy for higher strength and good roll forming characteristics. Baffle Panels should be manufactured from Roll forming machine or equivalent in India to get the high-quality Baffle panels with accurate dimensions. Panels shall be clipped to a galvanized steel carrier of 0.5 mm thick, Black Colour coated, one leg of the carriers with cut outs to hold the panels in a module of 150 mm. Panel carrier shall be suspended by means of threaded rod at a distance of 1.8 mtr. c/c. Paint Finish: Aluminium panels shall be chromatised for maximum bond between metal and paint enamelled twice under high temperature, Exposed side with a full primer and finish coat on a Continuous Paint Line. All ceiling shall be Green pro Certified: For LEED certification by Indian Green Building council (IGBC). Ceiling manufacturer should have local manufacturing unit in India. Manufacturer should have Roll-forming machine to produce Baffle panels & in-house testing lab in India & having more than 20 years of existence in India.

Providing and fixing 6mm thick High Pressure interior compact Laminate made out of thermosetting resign treated Kraft as core material and design paper as a finish surface. Finish and colour of compact laminates should be finalized under direction of Engineer –in-charge. Compact laminates should be installed on 25x50mm Aluminiunm tube or approved tube size at 500mm c/c under desirable height and fixed through same compact colour rivets or compact adhesive as per recommended by compact supplied agency.

Providing and fixing of Aluminium composite panel of total thickness 4mm comprising of Aluminium skin of 0.5mm with PVDF resin-based coating and fluorocarbon paint finish (70% resin) + 3mm Fire Retardant Mineral Filled Core comprising of around 90% Inorganic Compound which is 100% non-combustible mineral and balance virgin polymer + 0.5 mm Aluminium skin with mill finish/service coat all as per technical specifications and direction of EIC. Aluminium skin and core material must be bound together with adhesive film of minimum 100 microns thickness. The inorganic compound should consist ATH (Aluminium Tri Hydrate). The thickness of the adhesive film used for the lamination of the panels should be 100 microns.

Providing & fixing of straight and curved independent Paneling for walls & Columns anchored in floor slab & celling, cladded with any color Acrylic Solid Surface 12mm thick solid surface sheet straight fabricated on a single face, finished in matte finish, pasted with industrial grade silicon on a robust substrate. Substrate shall be with suitable MS box sections [Appx. 5 to 20 kg/ Sqm ] as per structural requirement & duly painted with anti-rust red oxide coating and covered with 6mm thick water proof flexi ply as per the design and dimensions approved. The proposal includes the cost of preparing appropriate substrate surface over the civil structure provided, along with material cost & installation / fixing on straight walls and curved profiles which require thermoforming the material by making dyes and templates etc. all as per technical specifications and direction of EIC.

Providing and fixing of 6mm thick lacquered glass of approved color by Architect/ Client, fixed with compatible neutral core silicon / double sided tape on a perfectly leveled 12mm thick water proof flexi plywood which is mounted on the RCC wall/any other structure all as per technical specifications and direction of EIC. (Payment of plywood item will be done separately)

TOILET CUBICLES Providing and fixing Toilet cubical (cubical of max size (1550 mm*2100 mm or as per drawing ) of 'Greenlam', 'Merino' or 'Debo India' and equivalent make made up of thermosetting resign treated high pressure, self-supporting decorative compact laminates with permanently incorporate anti-bacterial agents during manufacturing .Compact board should be resistance to water immersion through permissible increase on thickness and mass <0.60% and board density >1.35kg/cm3 and fulfilled the criteria of FSC and green guard gold certification and manufactured under EN438-2&3:2005 standard. 12mm thick compact board should be Moisture resistant, Impact resistant, termite resistant ,Scratch resistant ,Weather and climatic shock resistant. Finish of compact laminates should be suede finish which includes door, pilasters and intermediate panels finished with approved texture/shades as per IS2046 and fulfilled the criteria of fire retardant under BS-476/97 and EN438-6 with classification of BS1D0 standard. Pilaster to be supported with SS(grade316) adjustable foot and intermediate panels will attached to the wall with the help of approved SS(grade316) channels and all required hardware, made up of stainless steel as per manufacturer’s specification.. Door knob, gravity hinges, Thumb turn locksets with occupancy indicators, coat hooks with door stopper, U channel, top rail with corner connector, adjustable foot/pedestal, Rubber noise deafening tape, screw & wall plugs should be approved under the instruction of Engineer- in- charge. The top fitting should consist of SS. All screw will of 304 grade in SS with stain finish. All pilasters are supported by SS bottom cladding. The base of the stainless steel bottom cladding will be anchored to the floor with a clearance height upto 150 mm. Finish and colour of Toilet cubical should be approved under guidance of engineer-incharge.

Providing and fixing white battery based urinal of JAQUAR, KOHLER, ROCA or equivalent having Model No. URS-WST-132530, 18645IN-SS-0, RS35945J460 respectively with all accessories including providing & fixing urinal with rear inlet & sensotronic mini concealed type flushing valve having Model No. SNR-STL-51083, 24199IN-C-01-CP, RT525165003 respectively with installation box having pre & post flushing , having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge.

Providing & fixing Urinal Modesty Panels made of 12 mm thick compact laminated board of approved make and texture/shade having standard dimension of 1200 mm Height x 450 mm Width and made as per IS 2046 (Indian Standard) and as per fire retardant BS-476/97 standard and should be heat, bacteria, water, chemical, scratch and impact resistant. The product should have Green Guard Certificate. Including all accessories as per approval and direction of Engineer-in-Charge. Modesty panels will be fixed to the wall at an height of 500-600mm from the floor with 304 grade SS right angle bracket, 34 grade SS Screws with satin finish & Wall Plugs. The work includes all accessories, machineries, tools etc., complete as per direction of Engineer-in- charge.

Providing & fixing of Aluminium curtain wall systems comprising 37.52mm laminated DGU glass (6 mm clear toughened glass +1.52 mm PVB + 6 mm performance toughened glass + 16 mm Air Gap + 8 mm Clear Toughened Glass) having properties as visible Light transmittance (VLT) of 30-45%, Internal Light reflection 10% to 16%, External light reflection 18 to 25%, shading coefficient (0.20 – 0.30) and U value of < 1.8 W/m2 degree K etc complete as per direction of Engineer-in- charge.

Providing and laying Modular matting whipping & scrapping -moisture & dirt recessed of Euronics or approved make for areas like main entry/ exit (Like Vestibules) or wherever required as per the technical specification and direction of Engineers in charge.

Dismantling of wash basin/urinal/ EWC/IWC etc. and connecting fittings including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead complete as per direction & satisfaction of Engineer in charge.

Dismantling of pillar cock, bottle trap, stop cock, bib cock, towel rod, water mixer, shower rose, health faucets etc. and connecting fittings including stacking of useful materials near the site and disposal of unserviceable materials within 50 mtrs lead complete as per direction & satisfaction of Engineer in charge.

Providing and fixing CP Brass Single lever telephonic wall mixer (Kohler/Jaquar or equivalent) of quality & make as approved by Engineer in charge. [For tendering purpose, wall mixer K-98755IN-4-CP of Kohler is Considered]

Providing and fixing CP Brass Bottle Trap (Kohler/Jaquar or equivalent) of approved quality & make and as per the direction of Engineer-in-charge. [For tendering purpose Bottle trap of complementary Series K-7314IN-CP of Kohler is Considered]

Providing and fixing toilet paper holder with cover in polished chrome (Kohler/Jaquar or equivalent) all complete as per the direction and satisfaction of Engineer-in-charge. For Tendering Purpose K 5633IN-CP of Kohler is considered.

Providing and fixing Soap dispenser and holder with frosted glass bottle in polished chrome (Kohler/Jaquar or equivalent) distant from wall of standard shape with fasteners of the same materials with snap fittings of approved quality and colour complete as per satisfaction of Engineer In Charge. [ For tendering purpose, K-10712D-CP of Kohler is Considered ]

Providing and fixing 610 mm towel bar in polished chrome (Kohler/Jaquar or equivalent) with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour all complete as per satisfaction of Engineering-In-Charge. [ For tendering purpose, K-5630IN-CP of Kohler is Considered ]

Providing and fixing Hand Shower (Health Faucet) with metal hose & Wall Hook (Kohler/Jaquar or equivalent) all complete as per satisfaction of Engineering-In-Charge. [ For tendering purpose, K-12927IN-CP of Kohler is Considered ]

Providing and fixing Glass Shelf in polished chrome (Kohler/Jaquar or equivalent) all complete all complete as per satisfaction of Engineering-In-Charge. [ For tendering purpose ,K-5636IN-CP of Kohler is Considered ]

Providing and fixing Square Stainless Steel Bathroom Floor Water Drain Grating in polished chrome (Floor jali) (Kohler/Jaquar or equivalent) all complete as per direction and satisfaction of Engineer In Charge. [ For tendering purpose ,K-7275IN-CP of Kohler is Considered ]

Providing and fixing Towel Shelf in polished chrome(Kohler/Jaquar or equivalent) all complete as per direction and satisfaction of Engineer In Charge. [ For tendering purpose ,K-25066IN-CP of Kohler is Considered ]

Providing and fixing C.P. Tumbler Holder (Kohler/Jaquar or equivalent) all complete as per direction and satisfaction of Engineer In Charge. [ For tendering purpose ,K-5637IN-CP of Kohler is Considered ]

Providing and fixing following sanitary fittings of approved make, complete in all respect as per direction & satisfaction of Engineer in charge. Brass elbow/ Socket/Tee (Male & Female) 20 mm - 15 mm Brass thread

Providing and fixing Overhead Shower rose with wall mount shower arm (Kohler/Jaquar or equivalent) all complete as per direction and satisfaction of enginnering in charge. [ For tendering purpose ,Shower rose K-73199IN-CP and wall mount shower arm K-20138IN-CP of Kohler is Considered ]

Providing and fixing C.P. Bib cock (Kohler/Jaquar or equivalent) of approved quality conforming to IS standards all complete as per direction and satisfaction of Engineer In Charge. [ For tendering purpose ,Bib Cock K 20073IN-4-CP of Kohler is considered]

Providing and fixing C.P. brass stop cock (concealed)(Kohler/Jaquar or equivalent) of standard design conforming to IS:8931. all complete as per direction and satisfaction of Engineer In Charge. [ For tendering purpose ,Concealed valve K-16087IN-4-CP of Kohler is considered]

Providing and fixing C.P. brass angle valve (Kohler/Jaquar or equivalent) for basin mixer and geyser points of approved quality conforming to IS:8931 all complete as per direction and satisfaction of Engineer In Charge. [ For tendering purpose ,Angle valve K-23515IN-4-CP of Kohler is considered]

Providing and fixing undercounter wash basin of make JAQUAR, KOHLER, ROCA or equivalent oval in shape having Model No. CNS-WST-705, 2211IN-0, RS-322307460 respectively, including providing and fixing Undercounter basin with all fixing accesories, waste coupling of make JAQUAR, KOHLER, ROCA or equivalent having Model No. ALD-CHR-705L130, 45432IN-CP, RF5054018A1 and bottle trap of make JAQUAR, KOHLER, ROCA or equivalent having Model No. ALD-CHR-769L250190, 7314IN-CP, RF9066A1 including painting of fittings and brackets, filling the gaps with silicon and making good the walls wherever require with other necessary fittings completed as per site condition and as per the direction of EIC

Providing and fixing wall hung water closet of JAQUAR or equivalent having Model No. CNS-WHT-959SPP, with PP soft close seat cover, Hinges Fixing accesories & Concealed Flush pneumatic Tank with floor mounted frame, installation kit and P trap connection set & Dual Support bracket (Chair bracket) & pneumatic Faceplate of required matching shape and cistern fittings, nuts, bolts and gasket etc complete as per the direction of EIC.

Providing and fixing Pillar cock of JAQUAR, KOHLER, ROCA or equivalent having Model No. ORP-CHR-100001PM, 20747IN-8-CP, RT5A4225CA1 respectively as per the direction of Engineer in charge

Providing and fixing Bib Cock of 15 mm dia with wall flange of make JAQUAR, KOHLER, ROCA or equivalent having Model No. ORP-CHR-10037PM or equivalent as per the direction of Engineer in charge.

Providing and Fixing Health faucet with 1 m flexible pipe and hanging hook of make JAQUAR, KOHLER, ROCA or equivalent having Model No. ALD-CHR-565, 12927IN-CP, RF9061A1 respectively as per the direction of Engineer in Charge

Providing and fixing Stainless Steel Wall Mounted Sink Cock 15 mm dia of make Jaquar or equivalent as per the direction of Engineer in charge

Providing and fixing Two-in-one Bib Cock 15 mm dia of make Jaquar or equivalent as per the direction of Engineer in charge

Providing and fixing Two-in-one Angle Cock 15 mm dia of make Jaquar or equivalent as per the direction of Engineer in charge

Providing & Fixing first quality Approved C.P brass Waste 32mm size full thread with 80 mm height of JAQUAR make model no. ALD-727or equivalent as per direction & satisfaction of Engineer-in-Charge

Providing & Fixing first quality Apporved colour vitreous china Wall hung basin With Accessories set of JAQUAR make model no. FNS-WHT-40801 or equivalent as per direction & satisfaction of Engineer-in-Charge

Providing & Fixing first quality Approved 15 mm C.P. Brass Pressmatic Cock auto closing system with 65 mm extension body of JAQUAR make model no. PRS-031L65 or equivalent as per direction & satisfaction of Engineer-in-Charge

Providing and fixing S.S. Grab bar fixed type of JAQUAR make model no. AHS-1503 or equivalent with all fittings and fixtures etc. complete in all respect as per direction & satisfaction of Engineer-in-Charge.

Providing & Fixing of Sensotronic Concealed Type Flushing Valve for Urinal Complete Set with Control Cock of JAQUAR make model No. SNR-STL-51077 or equivalent make Complete as per the Satisfaction and Direction of Engineer In Charge. Rate includes all concealed and Exposed Fittings for Sensor Valve.

Providing and fixing unplasticised-PVC moulded fittings / accessories for unplasticised Rigid PVC SWR pipes conforming to IS : 13592 Type B,. Multi Trap (a) 110mm. of make Astral or equivalent.

Providing and fixing 12 mm thick toughened clear glass of approved make in existing glazing structures at any height with sealants as necessary including scaffolding, safety arrangements and removing of old broken glass but excluding fittings, all complete as per direction of Engineer-in-charge. (No Extra payment will be payable for different size and shapes of glass, dismantling old glass, for providing scaffolding, carriages & shifting of glass to terrace / any height/ any location & silicon sealants)

Providing and fixing float glass mirror of Modi Guard, Saint Gobain, ASHI or equivalent over backing with ISI marked BWP plywood of required thickness and fitted with screws and cap etc. all complete as per satisfaction of Engineer-in-charge. (The Cost of the plywood will be paid seperatally) 5mm thick Mirror

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid board one side white color and other side of board laminated with PVC foil of minimum 14 micron thickness of approved design pasted with hot melt adhesive for cup boards, work stations and bathroom/kitchen cabinet etc. of required sizes comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non-toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel piano hinges/soft close clip on concealed hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel piano hinges/soft close clip on concealed hinges and necessary S.S screws shall be paid separately) 25 mm thick

Designing, Providing, fixing of 30mm Thk GFRC Screen (Jali) with Metallic Paint Cladding: GFRC is a form of concrete that uses fine sand, cement, polymer (usually an acrylic polymer), water, other admixtures and alkali-resistant (AR) glass fibers. The nominal thickness would be 20mm with additional stiffeners at the perimeter or any embedded studs for ease in installation.TiO2 shall be added in the mix for better performance. Materials used for making the GRC unit shall be generally comply with relevant standards or be approved by the Engineer-in-Charge. The mix shall be determined by the manufacturer and submitted to the Engineer-in-Charge for acceptance before work commences. The following limitations to the mix design shall be observed. - Glassfibre content minimum 3% by weight of total wet mix to 3.5% maximum. - Sand content minimum 30% by weight of total wet mix to 50% maximum. Admixtures to aid workability shall be incorporated after prior approval. If manufacturing takes place in a hot environment, additional steps shall be taken to delay setting of the GRC. The use of retarders shall be permitted and chilling of the water used in the mix shall be resorted to. Mould Release Agent The use of mould release agent shall be permitted provided it is compatible with the architectural finishes specified. The manufacturer shall submit full details of the type of release agent he proposes to use for acceptance by the Engineer-in- Charge.

Digital UV printing over glass/SS sandwiched panels/metal sheet/tile etc desinged as desired and using original UV 8 colours inks with 29 picolite spectra galaxy print head or equivalent, double deposition of ink on vaccum table of size bigger than 2500x1500 for precision holding of metal sheet etc including the cost of transportation loading and loading etc complete as per architectural drawing and direction of ETC. Printing shall be smooth/ textured as directed.

Providing, Executing & Fixing Spider Suspended Glazing of 13.52mm thick laminated clear float glass made by sandwiching a laminated sheet of polyvinyl butryl (PVB) of thickness 1.52mm between 6mm and 6mm clear toughened glass of reputed makes like Saint Gobain, Pilkingston, Guardian (USA), AIS Glass Solutions Ltd., Emirates Glass LLC, Glaverbel Modi Guard OR equivalent make as approved by Engineer In-Charge duly supported on Stainless Steel frame work used at each joint to provide lateral stiffness against wind loading, deflections, etc. as per codal provisions expected on entire structure including supports. The assembling and fixing of the glass canopy shall use standard accessories and hardware's of Dorma India Pvt. Ltd (Rodan-I series), Q-Railing India Pvt. Ltd.(formerly D-Line), Hafele India Pvt. Ltd., GEZE GmbH, Linox Technology Pvt. Ltd., AssaAbloy, Kich Architectural Products Pvt. Ltd., Godrej & Boyce or equivalent make as approved by Engineer In-Charge. The required nos. of single arm truss spider, two arm 180 degree truss spider, four arm truss spider, routel-button head, BHFB bolts or any other accessories & hardware as per approved structural design shall be provided to ensure better strength, sleek designs and aesthetic features. The fittings used shall be manufactured through investment casting process or as per latest technology in Stainless Steel grade 316. All the fittings shall be complete with all required accessories to meet the structural design requirements. The required EPDM washers between glass and metal and also Derlin bush be used at glass holes. The spring washer confirming to SS316 acting as locking mechanism to secure nut in place, ensuring full tightness shall be provided. The structural sealants of DOW Corning of DC 789/Sika Elastosil 305, Whacker or approved equivalent make , fasteners and weather elements shall be provided to ensure canopy is completely water proof.

Design, Fabrication,Supply, Installation,Testing, Protection, Cleaning & Handover Wood Veneer Composites cladding of Merino / Fundermax. The system shall be based on rain screen principle. Using grid work of prefabricated aluminium extruded sections of Alloy 6063 T6 in black anodized finish to with stand the design wind pressure confirming to IS -875 part III. The fastening brackets of MS-HDG with serrations and serrated washers to arrest the wind load movement with SS 316 Pins, fasteners and anchor bolts of approved make. Nylon separators to prevent bi-metallic contacts all complete required to perform as per drawing in conjunction with BOQ. The 8 mm thk High Pressure laminates (HPL) Cladding in accordance with EN438-6 type EDF with extremely effective weather protection of double hardened acrylic polyurethane resins. The panel shall be designed for 8mm groove in verticals - Horizontal & 8mm with open joint system. Wether sealant to be filled in the grooves. Each HPL panel shall be structurally glazed on the main alumium profile system fixed in line with tender drawings. Prefabricated grid mullions are fixed on to the RCC / Steel structure / brick walls with SS 316 anchor bolts and suitable anchors as recommended by approved supplier. The brackets shall have provision movement to accommodate the construction tolerances with + 20mm. Use of MS brackets with washers to prevent wind direction movement after final position. High Pressure laminates (HPL) Cladding panels prefabricated with Hole provision at factory. HPL Cladding panels needs to have stiffeners fixed on the back side of panel as per deflection criteria requirements. The vertical drain mullion is at every panel grid location running continuously. The design shall accommodate the building movements, thermal expansion and seismic movements. Also shall accommodate thermal expansion resulting from surface temperature of 60 deg cel on Natural Wood Veneer Composites Cladding outer skin without creating any additional stress. Note : Structural Steel supporting framework including its painting shall be measured and paid separately under relevant item.

Designing, Providing, fixing of min 20 mm thick GFRC panels integrated with necessary Hot dip galvanised (HDG) clamps, Hook brackets and SS Bolts, nuts/SS Screws mounted over precast MS inserts. The system shall be incorporated with necessary structural supportive HDG steel works including all essential connections, fixings sealants at interfaces etc. Cost excludes steel Works. Finish as per approved architectural samples by the Engineer-in- Charge.

Providing and laying gang saw cut Imperial White - First Quality Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 20 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge :

Supplying and fixing 3M Safety-Walk Slip-Resistant Medium Resilient Tape (width 1'') of Black or any other color as decided by EIC.

Providing & Fixing window roller blinds of required size as per direction and satisfaction of Engineer-in-Charge.

FLOCKED CARPET FLOORING i) "Providing & Fixing of Flocked textile floor of Nylon 6.6 face fiber or equivalentof approved make with 100% Nylon and completely water proof resilient backing. The flooring should be Anti static with thickness of 4.3 mm and approximate weight of 1.8 k.g./sqm of roll form. The carpet should be completely stain resistant and of a density approx. 80 million fibers/sq.mtr (70 million fiber/sq.yd) in the width of 2 mtr .The floor covering should have Fire Test EN-13501, Appearance Retention Hexapod ISO 140-8, Friction Slip Resistance Test EN 14041 Class DS, anti-microbial treatment, with resilient waterproof backing, anti allergic which is certified by British allergy foundation. The carpet should have permanent static contro. The work should be carried out by the authorized installer of the Company in India. Carpet should be laid on zero leveled surface. Carpet should be stick with SR 998 on the floor.

Proficio Engineering And Construction Pvt. Ltd.

CREATORS ENGINEERS AND INTERIORS