Loading…
Loading…
Tender Value
₹5.1 Cr
EMD Value
₹10.1 L
Closing Date
24 Aug 2026, 1:30 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
ELECT G
15 conditions · 3 needing a document upload
The tenderer must have minimum average annual contractual turnover of 'V/N or V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheet duly certified by the Chartered Accountant/Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
The Tenderer should have valid "Electrical License(LT)" issued by Electrical Licensing Board of any state. The license should have been issued on a date prior to the date of tender opening. NOTE: Non submission of valid "Electrical contract License" by the bidder shall result in summarily rejection of his/their bid.
25 conditions · 12 needing a document upload
The tenderer shall clearly specify whether the tender is submitted on his own Proprietary Firm) or on behalf of a Partnership Firm / company / Joint Venture (JV) / Registered Society / Registered Trust / Hindu Undivided Family (HUF) / Limited Liability Partnership (LLP) etc. The tenderer(s) shall enclose the attested copies of the constitution of their concern, and copy of PAN Card along with their tender. tender Documents in such cases are to be signed by such persons as may be legally competent to sign them on behalf of the firm, company, association, trust or society, as the case may be. In case of Partnership firm / Joint Venture (JV) / Hindu Undivided Family(HUF) / Limited Liability partnership(LLP)or Partners ofPartnership firm/LLP/etc., the firm should submit the valid Power of Attorney, Partnership Deed/Article of Association/Memorandum of Association, Board of Resolution, Certificate of Incorporation along with the tender. If the firm issole proprietor firm, the bidder should submit the supporting document of sole proprietorship firm
tenderer should quote his offer along with GST and other taxes
For all the tenders having advertised cost of Rs 10 lakh or above, the contractor shall have the option to take payment from Railways through a letter of credit (LC) arrangement. The tenderer shall affirm having read over and agreed to the termsand conditions of the LC option. The above option of taking payment through LC arrangement, once exercised by tenderer at the time of bidding, shall be final and no change shall be permitted, thereafter, during execution of contract. (TheTenderer should be submit his/their opinion for taking payment through letter of credit (LC) arrangement).
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The Bid Security shall be rounded off to the nearest 100. This Bid Security shall be applicable for all modes of tendering. Any firm recognized by Department of Industrial Policy and Promotion (DIPP) as 'Startups' shall be exempted from payment of Bid Security detailed above. Labour Cooperative Societiesshall submit only 50% of above Bid Security detailed above. Subject to exemptions provided above document, the tender must be accompanied by a Bid Security as mentioned, failing which the tender shall be summarily rejected
The tenderer shall submit along with the tender document, documents in support of his/their claim to fulfill the eligibility criteria as mentioned in the tender document. Each page of the copy of documents/certificates in support of credentials, submitted by the tenderer, shall be self-attested/digitally signedby the tenderer or authorized representative of the tendering firm. Self-attestation shall include signature, stamp and date (on each page). Only those documents which are declared explicitly by the tenderer as "documents supporting the claim of qualifying the laid down eligibility criteria", will be considered forevaluating his/their tender.
A certificate may be uploaded along with the offer that the Tenderer(s) has/have gone through all the conditions of contract and rates, specifications, etc. embodied in Indian Railway Standard General Condition of Contract-2022 with correctionSlips up to the date of closing of the tender
1.The Railway reserves the right to verify all statements, information and documents submitted by the bidder in his tender offer, and the bidder shall, when so required by the Railway, make available all such information, evidence anddocuments as may be necessary for such verification. Any such verification or lack of such verification, by the Railway shall not relieve the bidder of its obligations or liabilities hereunder nor will it affect any rights of the Railway there under. 2.a) In case of any information submitted by tenderer is found to be false forged or incorrect at any time during process for evaluation of tenders, it shall lead to forfeiture of the tender Bid Security besides banning of business for a period of upto five years. (b) In case of any information submitted by tenderer is found to befalse forged or incorrect after the award of contract, the contract shall be terminated. Bid Security, Performance Guarantee and Security Deposit available with the railway shall be forfeited. In addition, other dues of the contractor, if any, under this contract shall be forfeited and agency shall be banned for doing business for a period of upto five years.
FAMILARISATION: Tenderer should visit the site of the above works and have familiarized him self/them selves of the working conditions therein in all respects and in particular the following: 1. Topography of the area, 2. Conditions at the site of work, 3. Availability of local labour, both skilled and un skilled and theprevailing labour rate, 4. Availability of Water and Electricity, 5. The existing roads and access to the site of work, 6. Availability of space for putting labour camps, offices, stores, go down, engineering yard etc. NOTE: The FAMILARISATION certificate shall be submitted by the tenderer as per format attached atAnnexures
The tenderer shall clearly specify whether the tender is submitted on his own (Proprietary Firm) or on behalf of a Partnership Firm / company / Joint Venture (JV) / Registered Society / Registered Trust / Hindu Undivided Family (HUF)/Limited Liability Partnership (LLP) etc. The tenderer(s) shall enclose the attested copies of the constitution of their concern, and copy of PAN Card along with their tender. Tender Documents in such cases are to be signed by such persons asmay be legally competent to sign them on behalf of the firm, company, association, trust or society, as the case may be. In case of Partnership firm / Joint Venture (JV) / Hindu Undivided Family(HUF) / Limited Liability artnership(LLP)or Partners of Partnership firm/LLP/etc., the firm should submit the valid Powerof Attorney, Partnership Deed/Article of Association/Memorandum of Association, Board of Resolution, Certificate of Incorporation along with the tender. If the firm issole proprietor firm, the bidder should submit the supporting document of sole proprietorship firm
The tenderer should go through all the eligibility conditions (like Special Technical Criteria, Standard Technical Criteria, Standard Financial criterial etc.) as mentioned in the document and submit relevant documents and fill the enclosedformats/annexures in support of the condition. All the documents should be in legible format.
Provision of Lighting and welding facilities for 100% train examination in yard lines of RYD, OEC, RMUY & FPY Depots.
VSKP-ELECTG-26-27-WC-09
VSKP-ELECTG-26-27-WC-09
Open
Works - General
180 Days
Visakhapatnam, Andhra Pradesh
₹0
₹10.1 L
24 Aug 2026
25 Jul 2026
10 Aug 2026
247 items across 3 schedules
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 1,94,61,190.2 | ||
| — | 7500.00 | — | — | ||
| Single Cable laying along the road/track(Technical details provided in explanatory note) | — | — | — | 28,11,225 | |
| — | 1100.00 | — | — | ||
| Single Cable laying across the road/track.(Technical details provided in explanatory note) | — | — | — | 7,04,517 | |
| — | 30.00 | — | — | ||
| Supply, erection, testing & commissioning of G.I pipe earthing as per CEE's approved drawing.(Technical details provided in explanatory note) | — | — | — | 1,03,130.4 | |
| — | 500.00 | — | — | ||
| Supply & erection of cable route marker.(Technical details provided in explanatory note) | — | — | — | 45,735 | |
| — | 900.00 | — | — | ||
| Laying of cable along the concrete floor/black top road by cutting floor/black top road without G.I pipe/HDPE Pipe(Technical details provided in explanatory note) | — | — | — | 73,998 | |
| — | 12.00 | — | — | ||
| Design, fabrication, Supply, erection, testing and commissioning of LT feeder pillar. (Technical details provided in explanatory note) | — | — | — | 7,52,124 | |
| — | 30.00 | — | — | ||
| Supply, Erection, Testing and Commissioning of 100A MCCB(Technical details provided in explanatory note) | — | — | — | 1,14,084 | |
| — | 855.00 | — | — | ||
| Supply of 45W LED outdoor street light fitting(Technical details provided in explanatory note) | — | — | — | 12,14,100 | |
| — | 855.00 | — | — | ||
| Erection, testing and commissioning of Railway supplied Street light fitting in SST/GRP pole/GI octagonal pole/bldg/structure/Rail Pole etc.(Technical details provided in explanatory note) | — | — | — | 1,71,076.95 | |
| — | 855.00 | — | — | ||
| Supply, erection, testing of anti-theft box for pathway lighting and undergear lighting(Technical details provided in explanatory note) | — | — | — | 6,56,195.4 | |
| — | 500.00 | — | — | ||
| Supply & fixing of GI pipe 25mm dia(Technical details provided in explanatory note) | — | — | — | 1,28,685 | |
| — | 23.40 | — | — | ||
| Erection of required length RS joist/GI octagonal pole/Rail Pole/OHE Cut Mast etc. including cutting of Railway Supplied Unserviceable Rail Pole/RS Joist/OHE Cut Mast etc. before erection.(Technical details provided in explanatory note) | — | — | — | 1,68,084.54 | |
| — | 115.20 | — | — | ||
| Foundation of required size (Approx. 0.8MX0.8MX1M) with Excavation of earth pit in any type of soil/rock, Casting of M-10 Concrete foundation for erection of RS joist/GI octagonal pole etc. The price also includes M-15 Concrete for grouting and muffing. Approval for the foundation is to be obtained from Railways.(Technical details provided in explanatory note) | — | — | — | 9,19,296 | |
| — | 60.00 | — | — | ||
| Supply of LED Luminaire for Flood lights(Technical details provided in explanatory note) | — | — | — | 1,49,588.4 | |
| — | 20.00 | — | — | ||
| Design, Fabrication, Supply, Erection, Testing and Commissioning of IP:54, LT Rolling- in/out Examination Lighting Arrangement with Box.(Technical details provided in explanatory note) | — | — | — | 2,28,260 | |
| — | 80.00 | — | — | ||
| Supply, erection, testing and commissioning of All-in-one Solar Steet Light System 25W LED(Technical details provided in explanatory note) | — | — | — | 17,81,566.4 | |
| — | Breakup | for details. | — | ||
| Supply, erection, testing and commissioning of 10 mtrs High mast tower | — | — | — | 2,10,337.41 | |
| — | 2.00 | — | — | ||
| Storage Type Water Cooler 225 LPH Cooling Capacity(Technical details provided in explanatory note) | — | — | — | 2,79,980 | |
| — | 50.00 | — | — | ||
| Supply of 200W Flood Lights(Technical details provided in explanatory note) | — | — | — | 1,50,736 | |
| — | 50.00 | — | — | ||
| Erection of Highbay /medium bay/lowbay fitting/ LED Flood Light Luminaire with supply and fixing of GI clamp including connection.(Technical details provided in explanatory note) | — | — | — | 11,073 | |
| — | 10.00 | — | — | ||
| Supply of Wall Mounted Fan (3 Phase) with D.O.L. Starter(Technical details provided in explanatory note) | — | — | — | 2,68,450 | |
| — | 10.00 | — | — | ||
| Erection, testing and commissioning of Railway supplied wall mounting industrial air circulator Electric Fan 750mm and D.O.L. Starter.(Technical details provided in explanatory note) | — | — | — | 8,053.5 | |
| — | 80.00 | — | — | ||
| Supply and fixing of PVC circular box/RJ box /square junction box on wall/roof/truss. (Technical details provided in explanatory note | — | — | — | 3,532.8 | |
| — | 60.00 | — | — | ||
| Modular light/fan/ex fan/call bell point concealed/surface wiring (without supply and laying of pipe) with (2x1.5+1x1) Sq.mm FRLSH PVC insulated flexible copper conductor 1100V grade on truss/roof/wall. (Point wiring with Phase, Neutral & Earth). (Technical details provided in explanatory note) | — | — | — | 25,568.4 | |
| — | 200.00 | — | — | ||
| Supply & laying of PVC rigid Conduit pipe 25mm outer dia (Heavy) on truss with proper saddles/GI clamps.(Technical details provided in explanatory note) | — | — | — | 13,406 | |
| — | 10.00 | — | — | ||
| Provision for modular wiring on board 6A plug point with 2.5 sq.mm. copper wire. (Technical details provided in explanatory note) | — | — | — | 5,160.7 | |
| — | 10.00 | — | — | ||
| Modular Concealed/surface wiring (without supply and laying of pipe) for separate plug point 6A 250V modular type with (2x2.5+1x1.5) Sq.mm FRLSH PVC insulated flexible copper conductor 1100V grade.(Technical details provided in explanatory note) | — | — | — | 10,002.9 | |
| — | 10.00 | — | — | ||
| Modular Concealed/surface wiring (without supply and laying of pipe) for separate plug point 6A/16A 250V modular type with (2x4+1x2.5) Sq.mm FRLSH PVC insulated flexible copper conductor 1100V grade.(Technical details provided in explanatory note) | — | — | — | 15,515.6 | |
| — | 40.00 | — | — | ||
| — | 40.00 | — | — | ||
| — | 10.00 | — | — | ||
| — | 100.00 | — | — | ||
| — | 100.00 | — | — | ||
| — | 4.00 | — | — | ||
| — | 20.00 | — | — | ||
| — | 100.00 | — | — | ||
| — | 100.00 | — | — | ||
| — | 300.00 | — | — | ||
| — | 80.00 | — | — | ||
| — | 600.00 | — | — |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
NIT.pdf
ATTACHMENT
scheduleandExplanatorynotes.pdf Scope of work
ATTACHMENT
Annexures.pdf
ATTACHMENT
TenderFormSheets.pdf
ATTACHMENT
InstructionstoTenderer.pdf
ATTACHMENT
Specialconditions.pdf
ATTACHMENT
Earthingcablelayingdrawing.pdf
ATTACHMENT
GCC2022.pdf
ATTACHMENT
MAKESANDSPECIFICATIONS.pdf
ATTACHMENT
scheduleandExplanatorynotes.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .