Loading
Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹2.1 Craccepted-finance | ₹2.1 Cr | accepted-finance |
Tender Value
Refer Docs
EMD Value
₹3.0 L
Closing Date
16 Feb 2026, 10:30 pmClosed
Bengaluru Water Supply And Sewerage Board
Bindhu T
Work of providing & laying of 400-1400mm dia sewer lines at missing bits of S4C in various locations of Kathriguppe valley (2nd Call)
BWSSB/2025-26/WS/WORK_INDENT3027/CALL-2
BWSSB/2025-26/WS/WORK_INDENT3027/CALL-2
Open
Water supply/sewage lines
Two Tender Document System(Two Cover)
BWSSB Chief Engineer WWM West Bengaluru
7 documents required · 7 mandatory
Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)
Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period)
Total value of civl engineering works executed and payments received in the last five years (year-wise)
List of existing commitments and ongoing works
List of works for which tenders already submitted
Banker Details for reference
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
List of Financial Resources with Certificates
To qualify for award of this contract, each Tenderer in its name should have the below mentioned eligibility criteria in the last five financial years i.e., 2020-21 to 2024-25.a)As a Prime Contractor, the tenderer should have satisfactorily completed at least one similar nature of UGD work of value not less than Rs.119.56 lakhs
To qualify for award of this contract, each Tenderer in its name should have the below mentioned eligibility criteria in the last five financial years i.e.2020-21 to 2024-25 Should have executed in any one financial year,aminimum quantity ofi)256 Rmt of of 450 mm dia and above RCC NP-3 class sewer ii)110 Rmt of of 1000 mm dia and above RCC NP-3 class seweriii)107 Rmt of 600mm dia and above DWC HDPE pipe iv)36 Rmt of 900 mm dia and above MS Casing pipe through Trenchless Technology.v)15 Rmt of 1600 mm dia and above MS Casing pipe through Trenchless Technology.vi)1507 Cum of Earth work excavation
To qualify for award of this contract, each Tenderer in its name should have the below mentioned eligibility criteria in the last five financial years i.e., 2020-21 to 2024-25.Should have achieved in at least two financial years a minimum financial turnover (in all classes of civil engineering construction works only) of Rs.478 lakh.
Assessed Available Tender Capacity: (A xN x1.5 - B) greater than or equal to Rs.239.12 lakh where A equal to Maximum value of civil engineering works executed in any one year during the last five years (updated to 2025-26 price level at 10percent per year) taking into account the completed as well as works in progress. N equal to Number of years prescribed for completion of the works for which tenders are invited. B equal to Value at 2025-26 price level of existing commitments and on-going works to be completed during the next 12 months
Liquid assets and /or availability of credit facilities of not less than Rs.79.71 lakh (Credit lines/letter of credit/certificates from Nationalised /Scheduled banks in India for meeting the fund requirement etc.)
form of tender
ALL TERMS AND CONDITIONS ARE AS PER BID DOCUMENT
₹5,000
₹3.0 L
16 Feb 2026
6 Feb 2026
17 Feb 2026
10 Feb 2026
10 Feb 2026
Work of providing & laying of 400-1400mm dia sewer lines at missing bits of S4C in various locations of Kathriguppe valley
Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever nec...
Dismantling of Flexible pavements and disposal of dismantled materials and stacking serviceable and unserviceable materials separately-By Mechanical Means-Bituminous course.
Granular courses.
Dismantling of cement concrete pavement by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02m3 in volume and stock piling at designated locations and disposal of dismantled...
Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricadin...
In all kinds of soils Depth exceeding 1.50m, but not exceeding 3.00m
In all kinds of soils Depth exceeding 3.00m, but not exceeding 4.50m
Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricadin...
Ordinary/soft rock (without requiring blasting)
(For Depth exceeding 1.50m, but not exceeding 3.00m)
Ordinary/soft rock (without requiring blasting)
(For Depth exceeding 3.00m, but not exceeding 4.50m)
Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricadin...
Hard rock (blasting prohibited) Depth exceeding 1.50m, but not exceeding 3.00m
Hard rock (blasting prohibited) Depth exceeding 3.00m, but not exceeding 4.50m
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and installing sheet piling for both sides of the trenches for following depths with mild steel sheets of not less than 6.5mm thick, stronger knife edge, recessed spreader sockets, 3 inch si...
For depth 3.00m to 6.00m
Providing, erecting and removing casurina pole three tier BARRICADING using poles of 7.5 to 10cms dia. and 1.5m height above ground fixed vertically at intervals of 2.0 to 2.5m centre to centre and ho...
Providing S&S RCC SPUN/VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work site,...
RCC NP3 Class pipe of 500mm Diameter.
RCC NP3 Class pipe of 1000mm Diameter.
RCC NP3 Class pipe of 1200mm Diameter.
Providing and installation of Class SN-8 Double Wall Corrugated HDPE pipe outer wall corrugated and inner wall smooth piping system in accordance with IS 16098 part 2 and conveying to work site and lo...
Construction of RCC Machinehole chambers of 1:1.5:3 proportion or approved type Cast-insitu/Pre-cast RCC Machinehole chambers, constructed using form vibrators of standard type, with barricading, dang...
For every 0.1m additional above 1.00m and Upto 2.00m
Constructing Pre-cast RCC Machinehole 1.2m internal dia., 2.0m depth including SFRC cover & frame.
For every 0.1m additional above 2.00m and Up to 3.00m
Constructing Brick Masonry Circular Machinehole 1.50m internal dia. & 3.00m depth including SFRC Frame & Cover.
For every 0.1m additional above 3.00m and Up to 4.00m
Constructing Brick Masonry Circular Machinehole 2.40m internal dia. & 3.00m depth including SFRC Frame & Cover.
Refilling available earth around trenches/pipelines, cables in layers not exceeding 20cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50m, and lift upto 1.50m ...
Removal of Unserviceable Soil with Disposal upto a suitable distance as directed by the Engineer incharge of work.
Spreading of Stone Dust: Supplying and providing stone dust in the station yard or wherever required including watering, ramming, consolidating and dressing. The rate includes the cost of material, la...
Construction of Granular Sub-Base by Mix in Place Method by providing well graded Gravel, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavato...
Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Materia...
Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70kg/m2 using mechanical...
Providing and laying Bituminous Macadam with 100TPH capacity hot mix plant batch type using crushed aggregates of specified grading premixed with bituminous binder VG-30 @ 3.3% by weight of mix, trans...
Providing and laying Bituminous Concrete with 100TPH capacity hot mix plant batch type using crushed aggregates of specified grading, premixed with bituminous binder VG-40 @ 5.2 percent of mix and fil...
Providing and applying tack coat with RS1 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.20kg/m2 on the prepared bituminous surface cleaned with mechanical broom.
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Ready Mixed or Batch Mixed concrete as per IS 10262 mix design procedure for Cement Concrete works in all types of Structures other than Road works, using coarse aggre...
Supplying, fitting and placing TMT FE 550/550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying ...
Excavating of ramming/jacking/driving pit and receiving pit of size 5.00m(length) x 3.00m (breadth), up to 6.00m depth in all soil strata including shoring and strutting including cutting of Asphalt/...
Installation of product pipe by manual jacking method-Manufacturing, providing, transporting, rolling, lowering, laying & jointing, testing, commissioning of ERW (Electric Resistance Welded), SAW (Sub...
Jacking of 1000mm dia & 16mm thick M.S. Casing Pipe.
Jacking of 1600mm dia & 18mm thick M.S. Casing Pipe.
Connecting the existing lateral connections to the proposed/existing Sewer Mains, including earth work excavation in all soils, lowering, laying, barricading, dewatering, jointing RCC-NP3 Class pipes ...
Excavation of Hard Rock by diamond rope cutting method using diamond rope,line draw machine,making holes by drilling machine for breaking the block by means of hydraulic breakers/splitters without any...
Providing, filling and laying of sand bags filled with sand/clay for diversion of sewage during execution of work.
Dewatering the sewage/storm water by using reqired HP submersible pump for the diversion of storm/sewage during the execution of work-10 HP Pump.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
bid document.doc
Tender Document • 1.29 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .