Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹6.4 Cr
EMD Value
₹9.5 L
Closing Date
5 Aug 2023, 9:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Public Works Department
EE PWD CTD
Construction of Bridges on SH-48 at Km 33.65 Near Echaghatta and at 6.00 near Kaduru, On SH-47 at km 264.90 near Andanuru and at km 7.10 near Gunderi of Holalkere-Gunderi Ramagiri Road in Holakere Taluk, Chitradurga District.
PWD/2023-24/BR/WORK_INDENT57
PWD/2023-24/BR/WORK_INDENT57
Open
Bridges/Culverts
Two Tender Document System(Two Cover)
PWD Division Office Chitradurga
11 documents required · 11 mandatory
Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Total value of civl engineering works executed and payments received in the last five years (year-wise)
List of Financial Resources with Certificates
To qualify for Award of this contract, each Tenderer in its name should have in the last five years, satisfactorily completed as prime contractor, at least one similar work Such as Bridge work of value not less than Rs. 317.71 lakhs Work done Certificate issued by the competent Authority of rank not less than Executive Engineer
The Tenderer should have executed in any one year in the last five years the following minimum quantities of work Earthwork and Embankment 17194.00 M3 WMM 1108.00 M3 GSB 1011.00 M3 PCC and RCC 2396.00 M3 BM SDBC DBM BC 347.00 M3 TMT Steel 150.00 tonne workdone certificate issued by the competent authority of rank not less then executive engineer
Availability by owning equipments for this work , provided relevant document List of machinery to be owned Weigh batch concrete mixer 02 No Pugmil-01 nos Machine Concrete Mixer-03 Nos. Vibratory Roller- 2 Nos. Tipper- 4 Nos. JCB/ Excavator- 2 Nos. Water tanker- 2 Nos. Form Work or Centering materials-1000.00 M2 Motor grader-1no.
List of machinery on own Hire Lease Basis Machine Concrete Mixer-2 Nos Weigh batch concrete mixer- 1 No Vibratory Roller-1No Tipper-3 Nos.Excavator-1No Water Tanker-1Nos FormWorkCentering materials-1000 M2 Pugmil-1no Truck Mounted Bitumen Sprayer-1 No Static road roller-1No Hot Mix Plant 40/600-1No Mechanical paver finisher-1No
The Tenderer should be a KPWD Registered Class-I contractor. Registration Certificate
To qualify for Award of this contract, each Tenderer in his name should have in the last five years i.e. 2018-19 to 2022-23, achieved in at least two financial years a minimum financial turnover in all classes of civil engineering construction works only of Rs. 1270.85 Lakhs with UDIN is Mandatory Balance sheet & Profit & Loss A/c indicating contract receipts certified by the chartered accountant
Each tenderer should further demonstrate liquid assets and or availability of Credit facilities of not less than Rs. 190.62 Lakhs Credit lines letter of credit certificates from banks for meeting the fund requirement etc Bankers Certificate
The EMD as prescribed should be submitted by the Tenderer and In case of Bank Guarantee valid for 135 days as prescribed in e-portal, the original Bank Guarantee should be delivered to the Executive Engineer Scanned copy of E.M.D and Scanned copy of Bank Guarantee
Reports on the financial standing of the tenderer, such as profit and loss statements and auditors reports for the last five years
Statement showing the Existing commitments and ongoing works, in the prescribed proforma as per 1.5 A of Section 3 of Qualification information should be furnished. Statements should be countersigned by the Executive Engineer or Equivalent officer
Statement showing Details of works for which tenders are already submitted in the prescribed proforma as per 1.5 B of Section 3 of Qualification information should be furnished. Statements should be countersigned by the Executive Engineer or Equivalent officer
Statements/details as per 1.3, 1.4, 1.6, 1.7, 1.8, 1.9, and 1.12 of Section 3 of Qualification information should be furnished. Statements should be countersigned by the Executive Engineer or Equivalent officer
₹5,000
₹9.5 L
5 Jul 2023
5 Jul 2023
7 Aug 2023
3 Aug 2023
21 Jul 2023
Construction of Bridge on SH-48 Vishwanathanahalli to Sira Border Road at Km 33.65(Near Echaghatta) in Holalkere Taluk.
Earth work excavation for Foundation by mechanical means for all works &
depth upto 3 m, as per drawing and technical specifications, including setting out, shoring,
strutting, barricading, caution li...
Providing and laying in position plain cement concrete for levelling course for
all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine
aggregates as per relevant IS...
Supplying, Fitting and Placing un-coated TMT bar Reinforcement in sub-structure complete as per Drawing and Technical Specifications. PWD 2021-22 Volume 1 Item no 13.1 page no 99
Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever nec...
Removing all type of Hume Pipes and Stacking including Earthwork and Dismantling of Masonry Works. B) Pipes 600 to 900 mm dia I.NO 2.17 (ix)B VOL3 P.NO 9
Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever nec...
Providing and laying of Filter media with granular materials/ stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MoRTH specifications to at hickness of not less than...
Providing and laying boulders apron on river bed for protection against scour with stone boulders weighing not less than 40 kg each complete as per drawing and Technical specification. A Boulder Laid ...
Providing and laying pitching on slopes laid over flter media including boulder
apron laid dry in front of toe of embankment complete as per drawing and specification.A)Stone/
Boulders PWD 2021-22 Vol...
Providing and laying Filter material underneath pitching in slopes complete as
per drawing and Technical specifications PWD 2021-22 Volume 3 Item no 16.4 page no 111
Providing and laying in position Reinforced cement concrete for all Sub structures of building , Road works, Water works, Irrigation works & sub structure works of bridges,drain works & other parallel...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...
Providing and constructing curtain wall complete as per Drawing and Technical Specifications B. Cement concrete grade M15 I.NO 16.7 VOL3 P.NO 99
PCC M15 Grade leveling course below approach slab complete as per drawing and Technical specification I.NO14.9 P.NO103 VOL3
Reinforced cement concrete M30 grade for approach slab including reinforcement and formwork complete as per drawing and Technical specification (Batching Plant) i.no 14.1 vol 3 p.no 104
Providing and laying of asphaltic plug joint to provide for horizontal movement of 25 mm and vertical movement of 2 mm, depth of joint varying from 75 mm to 100 mm, width varying from 500 mm to 750 mm...
Providing and laying of asphaltic plug joint to provide for horizontal movement of 25 mm and vertical movement of 2 mm, depth of joint varying from 75 mm to 100 mm, width varying from 500 mm to 750 mm...
Tar paper-Supplying, and fixing in postion Tarpaper for laying over abutment
as Bearing conforming to MoSRT &H Specifications as 1per drawing and Technical
Specifications, including cost of all materi...
Provision of an Reinforced cement concrete crash barrier atthe bridge deck & approaches to bridge structure, constructed with Reinforced cement concrete with TMT reinforcement conforming to MORT&H spe...
Drainage Spouts using 100 mm GI pipe complete as per drawing and Technical specification PWD CSR 2021-22 V-3 Item no 14.8 Page no 103
Construction of Bridge on SH-47 Mandya-Hadagali Road at Km 264.90 (Near Andanuru) in Holalkere Taluk.
Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable ...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Back filling behind abutment, wing wall and return wall
complete including compaction as per drawing and Technical
Specification A. Granular material VOL-3 Schedule of rates for roads and bridges Item...
Providing and laying of Filter media with granular materials/ stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MoRTH specifications to at hickness of not less than...
Providing and laying in position plain cement concrete for levelling course for
all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine
aggregates as per relevant IS...
Providing and laying in position Reinforced cement concrete for all Foundation
works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per
relevant IS Codes machine mixe...
Providing and laying in position Reinforced cement concrete for all Sub
structures of building, Irrigation works, Sub structure works of bridges, Drain works & other
parallel works from 0.50m to 3.50 ...
Providing and laying in position Reinforced cement concrete for all Sub
structures of building, Irrigation works, Sub structure works of bridges, Drain works & other
parallel works from 0.50m to 3.50 ...
Supplying, Fitting and Placing un-coated TMT bar Reinforcement in sub-structure complete as per Drawing and Technical Specifications.VOL-3 Schedule of rates for roads and bridges Item code 13.1 Page n...
Providing and laying in position Reinforced cement concrete for all Super
structures of building , Road works, Water works, Irrigation works & super structure works of
bridges upto 3.50 m height. The ...
Supplying fitting & placing TMT bar reinforcement to super structure complete as per SpecificationsVOL-3 Schedule of rates for roads and bridges Item code 14.1 Page no 103
Drainage Spouts using 100 mm GI pipe complete as per drawing and Technical specificationVOL-3 Schedule of rates for roads and bridges Item code 14.8 Page no 103
Supplying, fitting and fixing in position true to line and level elastomeric bearing conforming to IRC: 83 (Part-II) section IX and clause 2005 of MoRTH specifications complete including all accessori...
Providing and laying of asphaltic plug joint to provide for horizontal movement of 25 mm and vertical movement of 2 mm, depth of joint varying from 75 mm to 100 mm, width varying from 500 mm to 750 mm...
Providing and laying of an elastomeric slab steel expansion joint, catering to right or skew (less than 20 deg., moderately curved with maximum horizontal movement upto 50 mm, complete as per approved...
Provision of an Reinforced cement concrete crash barrier at the bridge deck & approaches to bridge structure, constructed with Reinforced cement concrete with TMT reinforcement conforming to MORT&H sp...
PCC M15 Grade leveling course below approach slab complete as per drawing and Technical specification VOL-3 Schedule of rates for roads and bridges Item code 14.9 Page no 103
Reinforced cement concrete M30 grade for approach slab including reinforcement and formwork complete as per drawing and Technical specification (Batching Plant)VOL-3 Schedule of rates for roads and br...
Providing and laying Filter material underneath pitching in slopes complete as per drawing and Technical specificationNHSOR2021-2022
Providing and laying Pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and Technical specifications. A.Stone/Bou...
Painting Two Coats on New Concrete Surfaces Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete
surfacesVOL-3 Schedule of rates for roads a...
Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...
Tar paper: Supplying, and fixing in postion Tar paper over abutment as Bearing conforming to MoSRT &H Specifications as per drawing and Technical Specifications, including cost of all materials, labou...
Providing and laying in position Reinforced cement concrete for all Sub
structures of building, Irrigation works, Sub structure works of bridges, Drain works & other
parallel works from 0.50m to 3.50 ...
DETAILED QUANTITY CALCULATION of APPROACH ROAD
Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable ...
Scarifying the existing bituminous road surface to a depth of 50 mm and disposal of scarified material by Mechanical Means using Hydraulic excavator with in all lifts and lead MORTH Specification No. ...
Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and te...
Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading,...
Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to mee...
Construction of Granular Sub-Base of required grading as per design mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on p...
Wet Mix Macadam (Plant mix method) Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical ...
Prime Coat over WMM/WBM, Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0...
Tack coat on Bituminous surface, Providing and applying tack coat with RS1 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.20 kg/m2 on the prepared bituminous surface cleaned ...
Providing and laying Dense Graded Bituminous Macadam with 40/60 TPH capacity HMP using crushed aggregates of specified grading, premixed with bituminous binder VG-30, @ 4.5 per cent by weight of total...
Providing and laying Bituminous Concrete with 40/60 TPH capacity hot mix
plant using crushed aggregates of specified grading, premixed with bituminous binder VG-30, @
5.4 per cent of mix and filler, t...
Providing and laying of hot applied thermoplastic compound 2.5 mm thick
including reflectorising glass beads @ 250 g/ m2 area, thickness of 2.5 mm is exclusive of
surface applied glass beads as per IR...
Painting lines, dashes, arrows etc on roads in two coats on new work with
ready mixed road marking paint conforming to IS:164:2015 on bituminous surface, including
cleaning the surface of all dirt, du...
Providing and fixing of retro- reflectorised cautionary, mandatory and
informatory sign as per IRC:67:2012 made of Class C Type XI retro reflective sheeting fixed over
2 mm thick aluminium sheeting vi...
Providing Vertical Delineator having wide angle cube corner micro prismatic
non metallic reflective sheeting confirming to Type XI of ASTM D4956 -09 with White Color and
Red Color combination and havi...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Bid 57 kw4.doc
Tender Document • 1.13 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .