Maintenance of street light High Mass Subways underdeck and FOB lights on Delhi PWD roads under PWD EMD South West

SITC of Decorative LED Post Top fixture on existing pole are made out of spun alum. Top and dia cast alum, base. Power LED's mounted on metal clad PCB's are finally directly mounted on Extrude / Die cast aluminum Heat Sinks. A thermoformed P.C. diffuser is provided in clear, opal and prismatic finish as optional of Following capacity and having following features: Luminous efficcacy≥100 lm/watt, CCT = 2700-3000K, CRI≥70, Surge protection device ≥ 10KV, IP 65 housing, electronic driver, as per specification given in terms and conditions & fittings should be fixed with welding of Allen key nut bolt with pole etc. complete as required.(Fittings should be as per sample approved)

Total system lumens output≥6000

Supplying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade aluminium armoured cable of following size complete as required.

4 x 16 Sq.mm

Supplying and making straight through joint with cast resin compound including ferrules and other jointing materials for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required

4 X 16 sq. mm

4 X 25 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.

Upto 35 sq. mm

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 4930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.

63 mm dia (OD-63 mm & ID-51 mm nominal)

Supplying and drawing following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.

3 x 1.5 sq. mm

Dismantling of existing fittings from the Decorative pole & reinstallation the same on the existing pole i/c making connection with suitable size with wire and testing commissioning etc. complete as reqd.