RENEWAL OF FLOOR AND WALL TILES OF OLD P49 P23 AND P24 BUILDINGS INCLUDING TOILETS AND STAINLESS STEEL GRILL AT BALCONY INCLUDING ALLIED WORKS AT CGRA PARADIP

Dismantling floor, hearth or wall tiling including cement backing, removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

Taking down shutters exc. 1.00 sqm but not exceeding 2.00 sqm and refix it in same position , complete all as specified and directed.

M&L for Virified Ceramic tiles 8 to 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L for Virified Ceramic tiles 8 to 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm , in skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick plaster in CM 1:4 complete all as specified and directed.

M&L for Non - skid Ceramic tiles 7 to 8mm thick area to exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L for coloured Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10 mm thick screed bed in CM 1:4 complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed.

Material and labour 15 mm thick rendering in cement mortar (1:4) using water proofing compound @ 3 % by weight of cement in finish coat on other than fair faces of brick wall surfaces, finished even and smooth without using extra cement complete all as specified and directed. Note:- water proofing compound shall be measured and paid separately as supply only.

Material & Labour for preparation of new surfaces of wall and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over a coat of 1mm thick exterior wall putty over new surfaces complete all as specified and directed.

Supply only integral water proofing compound for plastering / concrete work, complete all as specified and directed.

Supply and fixing in replacement of following bore GI tubes, 'medium grade' galvanised,with all fitting and fixed complete to walls and ceilings or laid in floors :-

(a) 15 mm bore

(b) 20 mm bore

(c) 25 mm bore

M&L for Cutting chases, pinning in making good to facing on brick walls where required and pointing in cement mortar (1:3) to ends for concealed water tubing and making good, cutting n, exc. 10cm girth complete all as specified and directed.

Supply and fixing in repairs Plastic water closet seat, white, closed pattern with flat bottom, & cover & mild steel CP or aluminised hinging device complete all as specified and directed.

Supply and fixing in repair 10 litre capacity PVC valveless, syphonic action type low level flushing cistern with all accessories complete fixed with WC including syphone pipe, PVC flushing pipe of size (With brackets) complete all as specified and directed.

Supply and fixing in repair vitreous China wash hand basin white including SS 32 mm coupling , flat back,size 550X400 mm including cutting for pinning in ends of brackets, complete all as specified and directed.

Supply and fixing in repair 32 mm bore of discharge pipe waste coupling of PTMT (half or full threaded) Minimum weight 32mm-45gms) complete all as specified and directed.

Supply and fixing in repairs Wash down water closet (Pedestal pattern) including cast iron 100 mm P or S trap, complete all as specified and directed.

Supply and fixing in repair wall mixer and provision of overhead shower with 115mm Long Bend Pipe on upper side, connecting legs & wall flanges complete all as specified and directed. Make : Jaquar (FUS-29273UPR) or equilavent in make mentioned in Appendix 'A' to PS.

Supply and fixing in repair Hand shower health faucet with wall 8mm dia, 1.2 mtr long flexible tube & wall hook for EWC including hinges with complete fitting complete all as specified and directed. Make : Jaquar (ALD-573) or equivalent in make mentioned in Appendix 'A' to PS.

Supply and fixing in repair 110mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joints, fixed in wall incl taking down complete all as specified and directed.

Supply and fixing in repair 110mm bore PVC (SWR) bend/shoe complete all as specified and directed.

Supply and fixing in repair 75mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joints, fixed in wall incl taking down complete all as specified and directed.

Supply and fixing in repair 75mm bore PVC (SWR) bend/shoe complete all as specified and directed.

Supply and fixing in repair PVC connection 15mm size PTMT nuts of length 600mm complete all as specified and directed.

M&L for Cutting holes in brickwalls built in cement mortar for inserting Depth of embedded portion of holdfasts or lugs measured from the face of the jamb into the wall depth exc 5cm but n.exc 10 cm, superficial area n.exc 100 Sqcm and making good dismantled portion with and including araldite epoxy as per manufacturers instruction and applying a coat of oil bound distemper to match the surface as required complete all as specified and directed. (Note:- Cutting hole will be done mechanically drilling machine without damage existing Structure.)

M&L for Cutting holes into or through cement concrete slabs, chajjas, etc. reinforced or otherwise depth exc 5cm but n.exc 10cm superficial area not exceeding 100 sqcm and making good dismantled portion with and including araldite epoxy as per manufacturers instruction and applying a coat of oil bound distemper to match the surface as required, complete all as specified and directed. (Note:- cutting hole will be done mechanically drilling machine without damage existing RCC Structure.)

S&F stainless steel (Grade 304) railing made of hollow tubes,channels, plates,solid bar etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, in the balconies of the multi-storeyed building complete all as specified and directed. Note:- Grinding, buffing and polishing will be done after fixing grill work at the location.

S&F 12mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination,fixed in pelmet boxes fixed with MS Angle to the brick wall or concrete surface complete all as specified and directed.

Material & labour for preparation of old distempered surfaces of wall by washing, rubbing down, stopping including brooming down smoke soot, moulds, moss and efflorescent salts and trading oil greasy spots and applying one coat of oil bound distemper complete incl putty work whever required complete all as specified and directed.

S&F rolled mild steel , channel, angle, or tee sections, fixed to wall for connecting pelmet boxes, complete all as specified and directed.

Please Enable Macros to View BoQ information