CERTAIN MISC REPAIR TO DRAINS, BOUNDARY WALL, FENCING, GATE, SHED AND OTHER MISC WORKS AT VARIOUS LOCATIONS UNDER GE (MCTE) MHOW

Amount

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc., separation of serviceable materials from the unserviceable, stacking the serviceable materials within 100 M and disposal of unserviceable materials, debris and rubbish to a distance not exceeding 100 M as directed by the Engineer in Charge.

M&L for Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 ,complete all as specified

M&L for Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 but except stone.complete all as specified

M&L for Brick work with fly ash bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:4 using old size bricks , complete all as specified

M&L for plain cement concrete, type B1, 1:2:4 (Using 20mm graded granite stone aggregate) cast in situ in bed blocks, copings and the like including weathering, solightly rounded or chamfered angles and throating as directed including use and waste of form work.complete all as specified

Taking down cement or cement lime plaster any description, on brick or stone wall etc including raking out joints hacking for key,scrubing down with water etc, complete all as specified.

M& L Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished even and smooth without using extra cement including mixing of water proofing compound complete all as specified

M&L for raised pointing to RR stone walling with CM 1:3 complete all as specified and as directed

Demolition of un-reinforced Cement Concrete of any description and in any position not otherwise specifically provided for, separation of serviceable materials from the unserviceable, stacking the serviceable materials within 100 M and disposal of unserviceable materials, debris and rubbish to a distance not exceeding 100 M as directed by the Engineer in Charge.

M &L for Cement concrete type D2 , 1:4:8 (using 40 mm graded stone aggregate) in foundation filling and mass concrete complete all as specified and as directed.

M&L for Chequered cement concrete tiles 30cm x 30 cm x 25 mm thick, machine pressed, and cut and polished with grey cement and no pigment; set, jointed and pointed in neat slurry, in floors, laid over and including 15 mm thick screed bed in cement mortar 1:6, complete all as specified and directed .

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 40mm thick compacted bed of crushed stone, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand;

M&L for 300mm x 300mm x 10mm thick high traffic paver tiles (coloured) joint free as in floors of and jointed with neat cement slurry and poited in white / coloured cement to match the surface laid over and inculding 20mm thick screed bed in CM 1:6 complete all as specified and as directed by the Engr-in-Chage. Make "ENDURA" by Johnson or equivalent in SOMANY/ORIENT (IS 4457:2007)

M&L for preparation of new concrete surface of any description over 10cm girth or width, not otherwise described and applying two coats of synthetic enamel paint compete all as spcified and directed.

S&F, in repairs, 35mm thick (measured solid) precast cement concrete louvres and jallies, in cement concrete 1:2:4 type B-0 (using 12.5 mm graded stone aggregate), set in cement mortar 1:6, including all mouldings but excluding frame, with and including painting with two coats of cement base paint, complete all as specified and as directed by the Engineer-in-Charge.

Dismantling of RCC Jallies of any thickness and disposal of unserviceable materials, debris and rubbish out side MD Land complete all as directed by the Engineer in Charge.

M&L for Preparing new plastered surfaces of walls by brooming down or by steel wire brushing , scrapping down smoke , soot , moulds, moss and efflorescent salts and trading oil and greasy Spots and applying two coat of white wash complete all as specified and as directed.

S&F, in repairs, Galvanised, 2 strand, steel barbed wire 2.24mm dia, barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, taples or steel pins, etc. as directed (each line wire to be measured),

Restraining and resecuring steel barbed wires of any description including making good staples etc .

Dismantling posts or struts (wood, steel or R.C.C.) any section, embedded in natural ground including taking out embedded portion, and making good disturbed ground, complete all as specified & directed.

Dismantling fencing wire mesh, any type, complete all as specified and directed by the Engr-in- Charge

Fixing only chain link fencing including line wires, any mesh, size and type to any typeof standards, rails, straining bolts, etc. including provission of binding wire, complete all as specified and directed .

Supply only galvanized iron chain link fencing approved size complete all as specified and directed by Engr-in-Charge.

Excavating in post holes (or similar holes) each not exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, in soft /loose soil, including watering, and removing surplus soil to a distance n exc 50m and making good surface, complete all as specified & directed

M&L for PCC 1:2:4 type B-2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete, filling in column footing etc, complete all as specified & directed by the Engineer-in-Charge.d.

S&F mild steel angle iron posts and struts in fencing post and iron flats for securing chain link fencing including all necessary drilling bolting etc. and similar work all as specified and directed

S&F mild steel bolts & nuts (machine made) with octagonal or hexagonal or square head one end & screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt as required at site and dia of neck exc. 10mm, complete all as specified and as directed .

M&L for mild steel round bars 10 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed.

S&F mild steel framed work such as framed and hung as gates ornamental and intricate design, including pintle hinges, stops,hand-made sliding bolts, etcgrills, gratings etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framed work and similar works conforming to Fe-290 Gd E-165 complete all as specified and directed.

M&L for preparation of new steel surfaces of any description ,over 10 cm width or girth and applying two coats of synthetic enamelled paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of steel n. exc 10 cm in width or girth and unconnected with other painting and applying two coats of synthetic enamel paint over a coat of red oxide, complete all as specified and directed.

Demolition of reinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness, (Below or above ground level) separation of serviceable materials from the unserviceable, stacking the serviceable materials within 100 M and disposal of unserviceable materials, debris and rubbish to a distance not exceeding 100 M as directed by the Engineer in Charge.

M&L for reinforced cement concrete 1:2:4, type B1 (Using 20 mm graded stone aggregate) in landings, bed plates, pintle blocks, anchorage blocks, cover slabs (for manholes etc.) shelves and similar articles with plain faces and set in cement mortar 1:4 including necessary form work, complete all as specified

M&L for mild steel TMT reinforcement bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed by the Engr-in- Charge.

M&L 5 cm thick Sand stone slabs in sun-shades, chajjas,shelves, cills, landings,cover stones, templates, etc.n exc. 2m in length,punched dressed on face and along exposed edges,self faced on other side and set and pointed in lime mortar 1:2 or cement mortar 1:4. complete all as specified

M&L Reinforced Cement concrete1:2:4 type B1 as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under reamed piles and mass concrete complete all as specified.

M&L Reinforced Cement concrete1:2:4 type B1 as in Columns, pillars, piers, posts and struts complete all as specified.

M&L Reinforced Cement concrete1:2:4 type B1 as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified.

M&L for Use and waste form work to sides of concrete foudations, footings for flat and rough finished surfaces of concrete

Use and waste form work to sides of columns, pillars posts struts for flat and rough finished surfaces of concrete

Use and waste form work to soffits and sides of beams, lintels etc. for flat and rough finished surfaces of concrete

S&F Reinforced concrete pipes 450 mm bore class NP2, laid and jointed complete with collars

S&F Reinforced concrete pipes 300 mm bore class NP2, laid and jointed complete with collars

S&F Reinforced concrete pipes 150 mm bore class NP2, laid and jointed complete with collars

Dismantling of Plain or corrugated steel / AC sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings

S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and as directed.

S&F Plain, galvanised, mild steel sheeting thickness 0.63mm , in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275

Dismantling of timber scantling as fillets, rails, posts, rafters, purlins, any section & any description complete all as specified and as directed.

S&F Steel work in tubular trusses, purlins etc including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240etc complete all as specified and as directed.

RK CONSTRUCTION

Chitragupta Construction

NIDHI CONSTRUCTION

SATHI ENTERPRISES

Robin Associates