Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹32.8 LAccepted-AOC | L1 | Accepted-AOC Reasonable lowest tenderer | |
| 2 | L2₹34.6 L+₹98,103.55 (2.91%)Rejected-Finance | L2 | Rejected-Finance Not Lowest tenderer | |
| 3 | L3₹38.2 L+₹4.5 L (13.4%)Rejected-Finance | L3 | Rejected-Finance Not Lowest tenderer | |
| 4 | L4₹39.1 L+₹5.4 L (16.2%)Rejected-Finance | L4 | Rejected-Finance Not Lowest tenderer | |
| 5 | L5₹40.1 L+₹6.5 L (19.2%)Rejected-Finance | L5 | Rejected-Finance Not Lowest tenderer |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
7 Mar 2022, 6:00 pmClosed
GE East Ferozepur Cantt
GE East Ferozepur Cantt
Repair replacement of street security lights UG Cable and connected items for MAP Accn and AOR of GE East Ferozepur at Ferozepur Cantt
2022_MES_502985_2
8170/GE/E/FZR/21-22/E8
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
GE East Ferozepur Cantt
Please refer Tender documents
8 documents required · 8 mandatory
₹500
Yes
GE East Ferozepur Cantt
₹80,000
Yes
23 Mar 2022
21 Feb 2022
9 Mar 2022
21 Feb 2022
7 Mar 2022
2 Mar 2022
Amount
Disconnecting and taking down repairable HPSV/HPMV/MH lamp type street light fitting of any type and capacity and make from existing 9 metre /11 metre pole for checking to find out the defects cleaning the bowl and prefix cover, repair/replacement of spare parts including necessary wiring etc for making the fitting in serviceable condition and refixing in original position, testing etc complete all as specified and directed. Note : (i) The Spare parts will be measured and paid separtely. (ii) All type of T&P for repairing of street light will be provided by the contractor at own arrangememt.
Supply only porcelin brass holder for 150/250 Watt street light fitting complete all as specified and directed.
Supply only HPSV lamp of capacity 70 Watt complete all as specified and directed.
Supply only HPSV lamp of capacity 150 Watt complete all as specified and directed. Make: Bajaj, crompton
Supply only HPSV lamp of capacity 250 Watt complete all as specified and directed.
Supply only ignitor suitable for HPSV/MH lamp fitting of capacity 70/150/250 Watt complete all as specified and directed.
Supply only copper wound ballast chock of 70 Watt, 240 Volts complete all as specified and directed.
Supply only copper wound ballast chock of 150 Watt, 240 Volts complete all as specified and directed.
Supply only copper wound ballast chock of 250 Watt, 240 Volts complete all as specified and directed.
Supply only LED Lamp 45 W ,240 volts, 50 Hz, Warm White in colour, complete all as specified and directed.
Supply Lamp angle holder (Plastic Ring), 240 volts, 50 Hz, 6A, white in colour, duly ISI marked complete all as specified and directed.
Disconnecting and taking down repairable LED type street light fitting of any type and capacity and make from existing 9 metre /11 metre pole for checking to find out the defects cleaning the glass and prefix cover, repair/replacement of spare parts including necessary wiring etc for making the fitting in serviceable condition and refixing in original position, testing etc complete all as specified and directed. Note : (i) The Spare parts will be measured and paid separtely. (ii) All type of T&P for repairing of street light should be provided by the contractor at own arrangememt.
Supply only LED driver 240Volt 50Hz for 25 watt LED fittings complete all as specified and directed.
Supply only LED driver 240Volt 50Hz for 45 to 70 watt LED fittings complete all as specified and directed.
Supply only LED driver 240Volt 50Hz for 75 to 90 watt LED fittings complete all as specified and directed.
Supply only LED surge arrester 240Volt 50Hz for 45 to 70 watt LED fittings complete all as specified and directed.
Supply only LED surge arrester 240Volt 50Hz for 75 to 90 watt LED fittings complete all as specified and directed.
Supply only LED bulb set for street light complete set 240Volt 50Hz for 45 to 70 watt LED fittings complete all as specified and directed.
Supply only LED bulb set for street light set 240Volt 50Hz for 75 to 90 watt LED fittings complete all as specified and directed.
Disconnecting and taking down repairable LED type street light fitting from High Mast Light of any type and capacity and make from existing 15 mtrs/16 mtrs high mast pole by taking down the LED light by roatating through Electric/Mechanical Mechanism for checking to find out the defects cleaning the glass and prefix cover, repair/replacement of spare parts including necessary wiring etc for making the fitting in serviceable condition and refixing in original position, testing etc complete all as specified and directed. Note : (i) The Spare parts will be measured and paid separtely. (ii) All type of T&P for repairing of High mast light should be provided by the contractor at own arrangememt.
Supply only LED driver 240Volt 50Hz for 120 to 150 watt LED fittings complete all as specified and directed.
Supply only LED surge arrester 240Volt 50Hz for 120 to 150watt LED fittings complete all as specified and directed.
Supply only LED bulb complete set 240Volt 50Hz for 120 to 150 W watt LED fittings complete all as specified and directed.
Retightening of Loose/ Disconnected Connection of HPSV/HPMV/MH lamp/LED type street light fitting of any type and capacity and make on existing 9 metre /11 metre pole for Cleaning of carbon from connecting wire and joint the connection as per existing Connections and refixing in original position,etc complete all as specified and directed. Note : (i) All type of T&P for Connection Checking and tightening of connection of street light shall be provided by the contractor at own arrangement.
Taking down old worm out /faulty LT UG Cable of size 10 Sqmm to 16 Sqmm 4 core complete all as specified and directed.
Laying only serviceable cable XLPE insulated and sheathed armoured 1100 volts grade heavy duty electric cable with multistranded aluminium conductor laid in trenches/duct through pipe, in floor on poles in and including aluminium thimble, Sleeve and proper insulating material i.e. PVC insulation tape complete and keeping Partly serviceable XPLE cable in safe custody for re-use in the work complete all as specified of Size 10 Sqmm 4 core complete all as specified and directed by Engr in Charge.
Supply and laying XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area of size 4 core 10 sqmm including taking out old u/s cable complete all as specified and directed.
S & F cable PVC insulated and sheathed in service connection (WPTC)with Solid aluminum conductor flat off size 2 core 10 Sq mm including 4mm GI wire and porcelene insulated apart of 01 metre each ISI mark including taking out old u/s service wire complete all as specified and directed.
S&F cable PVC insulated sheathed twin core stranderd Aluminium conductor of size 2.5 Sq mm for connection of security /Street lights complete all as specified and directed.
S&F Service cable PVC insulated sheathed twin core solid aluminium conductor of size 6 Sq mm for connection of security /Street lights complete all as specified and directed.
Excavation in trenches n.exc 1.5m wide and n.exc 1.5m deep for laying of cable foundations of poles/stays etc. and getting out in soft/loose soil complete all as specified and directed .
Removal of surplus excavated material n exc. 50 m and depositing where directed at a n. exc 1.5 m above the starting point complete all as specified and directed.
Returning filling in including spreading , levelling watering and well ramming in layers each n.exc. 25 cm thick each layer and performing bottom surface to required gradient complete all as specified and directed.
M & L dry and clean fine sand cushioning as cable protection to under ground cable in trenches laid in layer of 8cm deep before layimg the cable and 15cm deep after laying and stretching the cable complete all as directed. Note : The Punned down thickness shall be measured and paid seperatly
Supply and laying well burnt old size sub class 'B' bricks laid in trenches for cable protection complete all as specified and directed.
S&F in replacement of Factory made sheet metal encloser SPN single door type made out of CRCA sheet IP 43 protection 2 way 240 v dust and vermin proof includind clamps, nut-bolts for fixing of fixing on pole complete all as specified. make - Havells cat part no DHDESDP or equivalant cat part in make HPL/Indo asian as approved by GE.
S&F MCB single pole neutral 240 volts, 40 Amps, 10 KA complete all as specified and directed.
S&F MCB single pole neutral 240 volts, 63 Amps, 10 KA complete all as specified and directed.
Supply and errecting prestressed concete poles 7.5 mtrs long of cross section 102mm X 152 mm at top and 102mm X 281mm at bottom class 10complying with requirements of IS-1678-1978 including paints of poles in strips upto 1.5 metre from PCC block with two coats of synthetic enamel paint complete all as specified and directed.
M&L for plain cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate in foundation of PCC pole/struts including necessary form work complete all as specified and directed.
.M& L for plain cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate in foundation of stay assemble etc including necessary form work complete all as specified and directed.
M &L for plain cement concerete 1:2:4 type B-1 using 20 mm graded crushed stone aggregate for coping bed block around poles, incl necessary form work finishing even and smooth without using extra cement complete all as specified and directed.
Supply & fixing of LED Street light 60 Watt made up of pressure die cast housing with toughned glass Aesthetically designed roadway luminiare with excellent thermal management IP 66 protection including taking down old U/S fittings of any type complete all as specified and directed. Make- KCSAD cat part No - KDJS60 or equivalent cat part in make Crompton/Bajaj as approved by GE
Supply and fixing LED street light fitting 90 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection with impact resistance of 1K and 10KV external SPD including taking down old U/S fittings of any type complete all as specified and directed. Make- KCSAD cat part No - KDJS90 or equivalent cat part in make HPL/Crompton as approved by GE.
S& F LED flood light Jeta Neo 120 (120 W, 6000K) energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium IP65, suitable for highlighting architectural facade and general purpose lighting including taking down old U/S fittings of any type complete all as specified and directed..Make- Havells cat part No-JETAIRISFLS120WLED757APNBLTG or equivalent cat part in make HPL/Crompton as approved by GE.
S&F acrelic cover suitable for HPSV/MV light fittings of 70/150/250watt complete all as specified and directed.
Supply & fixing 3 core 1.5 sqmm PVC insulated and FR PVC round sheathed copper conductor flexible 1100 volts for connection from Junction Box to street light fittings complete all as specified and directed.
S& F LED flood light (150 W, 6000K) energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium IP66, suitable for highlighting architectural facade and general purpose lighting including taking down old U/S fittings of any type complete all as specified and directed.Make- KCSAD cat part No - KDJF150 or equivalent cat part in make HPL/Crompton of approved by GE.
Boring of holes under road, pavement, hard standing for laying pipe for crossing cable including getting out, disposal of rubbish off to a distance upto 50 Mtrs including 50 mm GI pipe medium grade complete all as specified and as directed
Supply & fixing street light pole cable junction box IP-65 with metnic knockouts for cable entry and the box made out of thermal plastic material suitable for 16/25 UG sqmm cable including clamps bolts, nuts duly painted and MCB SP 6Amp etc complete all as specified & directed
S&F GI Bracket for street light fitting bend to shape made out of GI pipe light grade 40mm bore upto 1.2 mtr long etc complete with MS clamps duly painted with two coat of aluminum paint with nuts/bolts/washers for fixing arrangement to pole /wall complete all as specified and directed.
M&L Painting to old LT RCC pole upto 1.5 mtr height from PCC, of synthetic enamel paint with Yellow and Black of 30cm strips of each color upto 1.5mtr and including wiriting pole No. complete all as specified and directed .
M&L painting to steel tubular pole of size 9 metre / 11 metre hight with two coats of aluminium paint including preparation of old painted surface complete all as specified and as directed
Supply and laying GI pipe 40 mm bore /Size "light grade " for cable protection including taking out old/broken/rusty GI pipe with MS clamps complete all as specified and directed.
M/s AH Construction Co.
Brar Enterprises
CHETAK CONSTRUCTION COMPANY
JAWAHAR CONSTRUCTION COMPANY
KAILASH CONSTRUCTION COMPANY
Kansal Enterprises
V V AND COMPANY
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .