Tenkasi District Implementation of Jal Jeevan Mission to provide Functional Household Tap connection to Rural Households in Poigai and Puthukudi Panchayt in Kadayanallur Panchayat Union package no48

Amount

Providing additional water source ,Pumping main,Delivery Line ,new 60,000 liter OHT and FHTC's at Subramaniyapuram Village and Poigai Panchayat in Kadayanallur Panchayat Union.

Earth work excavation in all clauses of soils with initial lead and lift except hard rock requiring blasting etc., complete for foundation as per SS 20B

For first depth of 2m

For Second depth of 1m

Supplying and filling with sand including cost and conveyance and all labour charges such as watering and ramming etc., complete as per standard specification.

Supplying and filling with excavated earth including cost and conveyance and all labour charges such as watering and ramming etc., complete as per standard specification.

Cement concrete 1:4:8 mix using 40mm ISS HBG metal including all cost and conveyance and all labour charges etc., complete

1.50m to 4.50m Below GL

Centering charges for RCC works including all cost and conveyance all materials to site etc., complete.

PLANE SURFACE:-

Below GL

Above GL (0.000 - +3.300m)

Above GL (+3.300 - +4.300m)

Above GL (+6.300 - +7.300m)

CURVED SURFACE:-

Above GL (0.000 - +3.300m)

Above GL (3.300 - +4.300m)

SQUARE COLUMN:-

Below GL

Above GL (0.000 - +3.300m)

Above GL (+3.300 - +4.300m)

Above GL (+4.300 - +5.300m)

Above GL (+5.300 - +6.300m)

Above GL (+6.300 - +7.300m)

Supplying and fabrication of steel including all cost and conveyance and all labour charges for cutting, bending, tieing and placeing in position etc., complete.

RCC 1:1.5:3 mix using 20mm ISS HBG metal including all cost and conveyance and all labour charges etc., complete excluding cost of steel without centering.

1.50m to 4.50m Below GL

0m to 1.50m Below GL

Above GL (0.000 - +4.500m)

Above GL (+4.500 - +7.320m)

Above GL (+7.320 - +10.980m)

Plastering with CM 1:3 mix using to 10mm thick including all cost and conveyance of all materials and all labour charges etc., complete.

Exterior Emulsion painting two coats with best approved quality and colour emulsion paint over one coat of Base coat including cost and convyance of all materials to work site and labour charges etc., complete.

Supply and delivery of 65 mm dia GM Gate Valve

Fabrication, Supply, delivery and fixing in position of outside M.S.ladder of 0.45m wide made out of 50x50x6mm MS angle for sides and steps in 16mm MS plain rods fixed at 30cm c/c welded, jointed etc., providing with one coat of Red Oxide paint for providing access to Roof top with suitable inclined length, bottom anchorage and including transportation charges etc., complete.

Supplying and fixing of CI manhole frame and cover of size 0.75mx0.75mwith suitable 50x50x6mm MS angle fixed along edges etc., complete.

Supply and fixing of 65mm GI Pipe connection arrangements for inlet, outlet, scour and Overflow for 60000 litres capacity OHT

65mm GI Pipe

65mmΦ GI Tee

65mmΦ GI Elbow

65mmΦ GI Bend

ABSTRACT - SUB ESTIMATE I (RWHS & PLATFORM)

Earth work excavation in all clauses of soils with initial lead and lift except hard rock requiring blasting etc., complete for foundation as per SS 20B.

For first depth of 2m

For Core wall

Cement concrete 1:4:8 mix using 40mm ISS HBG metal including all cost and conveyance and all labour charges etc., complete

Brick work in CM 1:5 mix using third class country bricks of size 8 3/4 x 4 1/4 x 2 3/4 including all cost and conveyance of materials and labour charges etc., complete

Plastering with CM 1:5 mix using to 12mm thick including all cost and conveyance of all materials and all labour charges etc., complete.

Collection and supply of 40mm HBG metal and filling in to the recharge pits including cost and conveyance to the site and all labour charges for filling as per standard specifications.

Cement concrete 1:2:4 mix using 20mm ISS HBG metal including all cost and conveyance and all labour charges etc., complete

Pumping Pipeline & Pumpset Arrangements

Drilling of 150mm dia bore well in hard rock area including labour charges for indentation of casing pipe and transportation of rig Upto outer pipe

Depth upto end of Casing Pipe

Depth Upto end of Borewell

Supply and delivery of 180 mm dia 6 KSC PVC casing pipe

Supply and delivery of Three Phase 75lpmX150 Mtr Head wet type Submersible motor.

Supply and delivery of Three Phase 5.0HP Panel Board

Supply and delivery of 4.00 mm2 3 core flat type copper cable

Supply and delivery of 50mm dia UPVC pipe for erection work and Tank work

Supply and fixing of KIOSK of size 0.75X0.45X0.75m made out of MS angles and sheet with locking arrangements

Labour charges for erection of new submersible pump set in the bore well and commissioning

Earth work excavation and depositing on bank with in initial lead of 10 m and initial lift of 2m in hard stiff clay, stiff black cotton soil, hard red earth,earth mixed with small sized boulders and hard gravelly soil as per SS 20B

Cement concrete 1:4:8 mix using 40mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing,laying and curing etc complete for 10 cum.

Brick work in cement mortar 1:5 mix using country bricks 83/4"x4 1/4"x2 3/4" and conveyance of all materials to site and all labour charges etc complete For 10cum

Plastering with cement mortar 1:5 mix to 12mm thick including cost and conveyance of all materials to site and all labour charges etc complete for 10 Sqm.

Cement painting two coats with best approved quality and colour paint over one coat of Base coat including cost and convyance of all materials to work site and labour charges etc., complete.

Supplying & fixing with cuddapah slabs 20-30mm thick for cup board thick and pointed with cement mortar 1:3 -10 Sqm

Earthwork excavation in all clauses of soil such as gravel, hard gravelly soil, hard stiff clay, stiff black cotton soils including all labour charges etc complete.

Supply and Delivery of 75mm dia PVC Pipe including cost and conveyance and all Labour charges etc complete.

Jointing of Laying of 63mm,75mm dia PVC Pipes including Cost and Conveyance and all Labour Charges etc, Complete.

Refilling the excavated trenches including all labour charges etc complete.

Wiring with 2 x 1.5 Sq.mm (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A F.T. switch with painting of suitable colour for open PVC light point / fan point for electronic regulator) (Assume 5 points per coil)-SD-18

Supply and fixing of TNEB Meter Board suitable for 32A Three Phase service connection with 3 Nos. 32A Fuse unit (500V), 32A Neutral link and earth link (1inch x 1/8inch Copper flat) on TW plank of size 600mm x 450mm x 19mm with supporting TW reepers of 1inch thick on either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and interconnection with 7/20 PVC insulated copper wire from EB meter to fuse unit.SD-127

Supply and fixing of 32Amps DP Switch of 500 V With matel clad with fuse and neutral (sideHandle) on sutiable TW Board with earth connection only.SD-144

Supply and fixing of 2 0f 4 sqmm (56/0.30) polythene insulated and PVC unsheeted Sc Alu cable of 1100V on 7/20 GI Bearer wire for service connection with necessary angle iron upright and end supports for mains SD-67

Supply and fixing of WT bulk head fitting with guard (Philips / Bajaj / Crompton / K. Lite) suitable for11W CFL lamp with CFL SD-83

Supply and fixing of 20mm dia GI Pipe including cost and conveyance all labour charges etc complete.

HSC Connection in PVC Mains for Water Supply Scheme - Providing suitable 63x20 mm dia PVC Saddle inserted for tapping outlet suiting for ½”, 3/4” &1” clear bore

Common Items for HSC Connection - PBrass Ferrule as per IS 319 grade of sizes 15mm, 20mm and 25mm size and threaded as per IS:1554 BSPT, ISO:7-1 to suit the corresponding bore sizes of 15mm, 20mm and 25mm dia size ( 1/2", 3/4" and 1") in the saddle Connection as per IS :1554 BSPT, ISO:7-1 (20mm) 15 mm

Poly Propylene compression Female Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK for connecting 15mm, 20mm and 25mm outlet points of Brass ferrule of sizes 15mm, 20mm and 25mm respectively. (20mm)

Poly propylene 90 Degree Compression elbow with compression joint at both ends as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes - 20mm

Poly Propylene compression Female Threaded Elbow with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes - 20mm

Poly Propylene compression Male Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes - 20mm

MDPE PE 80 PN16 Blue pipe as per standards ISO 4427 and Tested as per BS 6920 in WRC-NSF LTD, UK - 20mm

Earthwork Excavation for 20mm PVC pipe laying work including cost of Refilling work as per Standard Specifications 20B (in Rm)

Labour Charges for Laying & Jointing 20 mm pipe in Excavated Trench in Proper Camber

Supply & Laying & Jointing 20 mm PVC Elbow (Mould) BIS 7834/1975 Part V for Tap Connection

Supply & Jointing 20 mm SS/brass tap (Local rate)

U PVC ball valve with one side compression end and other side female end as per ISO 4422-4 and Tested as per BS 6920 in WRC-NSF LTD, UK,size : 20mm ODx1/2"ID, 25mm ODX1/2"ID and 32mm OD X 3/4" ID - 20mm

Supply and delivery flow control valve for 20LPCD - 20mm dia

Labour charges for Drilling,Cutting and fixing ferrules in distribution line

Supply and delivery of the MS clamp and fixing in wall in open space with required screw etc

Cutting MDPE Pipes and specials true axis and finishing the end complete

Cutting of old Cement Concrete road for laying the 20mm pvc pipe

Cement concrete 1:4:8 mix using 20mm ISS metal including cost and all cost and conveyance of materials and all labour charges etc complete

Cement concrete 1:2:4 mix using 20mm ISS HBG metal including cost and conveyance and all other labour charges etc complete.

Electro Chloranation Disinfection - common salt as per TWAD SOR - page no -57 clause 21.2

Construction of 60,000 Litres capacity OHT, New Borewell With Motor , Extension of Pipe line at Padaiyachi Colony and FHTC's at Mangalapuram Village and Puthukudi Panchayat in Kadayanallur Panchayat Union.

Earth work excavation in all clauses of soils with initial lead and lift except hard rock requiring blasting etc., complete for foundation as per SS 20B

For first depth of 2m

For Second depth of 1m

Supplying and filling with sand including cost and conveyance and all labour charges such as watering and ramming etc., complete as per standard specification.

Supplying and filling with excavated earth including cost and conveyance and all labour charges such as watering and ramming etc., complete as per standard specification.

Cement concrete 1:4:8 mix using 40mm ISS HBG metal including all cost and conveyance and all labour charges etc., complete

1.50m to 4.50m Below GL

Centering charges for RCC works including all cost and conveyance all materials to site etc., complete.

PLANE SURFACE:-

Below GL

Above GL (0.000 - +3.300m)

Above GL (+3.300 - +4.300m)

Above GL (+6.300 - +7.300m)

CURVED SURFACE:-

Above GL (0.000 - +3.300m)

Above GL (3.300 - +4.300m)

SQUARE COLUMN:-

Below GL

Above GL (0.000 - +3.300m)

Above GL (+3.300 - +4.300m)

Above GL (+4.300 - +5.300m)

Above GL (+5.300 - +6.300m)

Above GL (+6.300 - +7.300m)

Supplying and fabrication of steel including all cost and conveyance and all labour charges for cutting, bending, tieing and placeing in position etc., complete.

RCC 1:1.5:3 mix using 20mm ISS HBG metal including all cost and conveyance and all labour charges etc., complete excluding cost of steel without centering.

1.50m to 4.50m Below GL

0m to 1.50m Below GL

Above GL (0.000 - +4.500m)

Above GL (+4.500 - +7.320m)

Above GL (+7.320 - +10.980m)

Plastering with CM 1:3 mix using to 10mm thick including all cost and conveyance of all materials and all labour charges etc., complete.

Exterior Emulsion painting two coats with best approved quality and colour emulsion paint over one coat of Base coat including cost and convyance of all materials to work site and labour charges etc., complete.

Supply and delivery of 65 mm dia GM Gate Valve

Fabrication, Supply, delivery and fixing in position of outside M.S.ladder of 0.45m wide made out of 50x50x6mm MS angle for sides and steps in 16mm MS plain rods fixed at 30cm c/c welded, jointed etc., providing with one coat of Red Oxide paint for providing access to Roof top with suitable inclined length, bottom anchorage and including transportation charges etc., complete.

Supplying and fixing of CI manhole frame and cover of size 0.75mx0.75mwith suitable 50x50x6mm MS angle fixed along edges etc., complete.

Supply and fixing of 65mm GI Pipe connection arrangements for inlet, outlet, scour and Overflow for 60000 litres capacity OHT

65mm GI Pipe

65mmΦ GI Tee

65mmΦ GI Elbow

65mmΦ GI Bend

Earth work excavation in all clauses of soils with initial lead and lift except hard rock requiring blasting etc., complete for foundation as per SS 20B.

For first depth of 2m

For Core wall

Cement concrete 1:4:8 mix using 40mm ISS HBG metal including all cost and conveyance and all labour charges etc., complete

Brick work in CM 1:5 mix using third class country bricks of size 8 3/4 x 4 1/4 x 2 3/4 including all cost and conveyance of materials and labour charges etc., complete

Plastering with CM 1:5 mix using to 12mm thick including all cost and conveyance of all materials and all labour charges etc., complete.

Collection and supply of 40mm HBG metal and filling in to the recharge pits including cost and conveyance to the site and all labour charges for filling as per standard specifications.

Cement concrete 1:2:4 mix using 20mm ISS HBG metal including all cost and conveyance and all labour charges etc., complete

Delivery Pipeline & Pumpset Arrangements

S/D 63mm 4 KSC PVC Pipe

Earth work excavation with an initial lead and lift in hard stiff clay, black cotton, hard red earth, sub murram gravel, stone and earth mixed boulders as per SS20B for pipe laying work.

Refilling the excavated portions for Pipe Laying works with excavated earth as per ss20 B etc., complete.

Labour charges for Laying of GI, PVC rigid pipes with lead of 200m lowering into trench, laying in proper grade, alignment, jointing PVC coupler with specials and tested to the required pressure including conveyance of water upto 1km lead during the testing etc., complete.

63mm PVC Pipes 4Ksc

Pumping Pipeline & Pumpset Arrangements

Drilling of 150mm dia bore well in hard rock area including labour charges for indentation of casing pipe and transportation of rig Upto outer pipe

Depth upto end of Casing Pipe

Depth Upto end of Borewell

Supply and delivery of 180 mm dia 6 KSC PVC casing pipe

Supply and delivery of Three Phase 75lpmX150 Mtr Head wet type Submersible motor.

Supply and delivery of Three Phase 5.0HP Panel Board

Supply and delivery of 4.00 mm2 3 core flat type copper cable

Supply and delivery of 50mm dia UPVC pipe for erection work and Tank work

Supply and fixing of KIOSK of size 0.75X0.45X0.75m made out of MS angles and sheet with locking arrangements

Labour charges for erection of new submersible pump set in the bore well and commissioning

Earth work excavation and depositing on bank with in initial lead of 10 m and initial lift of 2m in hard stiff clay, stiff black cotton soil, hard red earth,earth mixed with small sized boulders and hard gravelly soil as per SS 20B

Cement concrete 1:4:8 mix using 40mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing,laying and curing etc complete for 10 cum.

Brick work in cement mortar 1:5 mix using country bricks 83/4"x4 1/4"x2 3/4" and conveyance of all materials to site and all labour charges etc complete For 10cum

Plastering with cement mortar 1:5 mix to 12mm thick including cost and conveyance of all materials to site and all labour charges etc complete for 10 Sqm.

Cement painting two coats with best approved quality and colour paint over one coat of Base coat including cost and convyance of all materials to work site and labour charges etc., complete.

Supplying & fixing with cuddapah slabs 20-30mm thick for cup board thick and pointed with cement mortar 1:3 -10 Sqm

Earthwork excavation in all clauses of soil such as gravel, hard gravelly soil, hard stiff clay, stiff black cotton soils including all labour charges etc complete.

Supply and Delivery of 75mm dia PVC Pipe including cost and conveyance and all Labour charges etc complete.

Jointing of Laying of 63mm,75mm dia PVC Pipes including Cost and Conveyance and all Labour Charges etc, Complete.

Refilling the excavated trenches including all labour charges etc complete.

Wiring with 2 x 1.5 Sq.mm (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A F.T. switch with painting of suitable colour for open PVC light point / fan point for electronic regulator) (Assume 5 points per coil)-SD-18

Supply and fixing of TNEB Meter Board suitable for 32A Three Phase service connection with 3 Nos. 32A Fuse unit (500V), 32A Neutral link and earth link (1inch x 1/8inch Copper flat) on TW plank of size 600mm x 450mm x 19mm with supporting TW reepers of 1inch thick on either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and interconnection with 7/20 PVC insulated copper wire from EB meter to fuse unit.SD-127

Supply and fixing of 32Amps DP Switch of 500 V With matel clad with fuse and neutral (sideHandle) on sutiable TW Board with earth connection only.SD-144

Supply and fixing of 2 0f 4 sqmm (56/0.30) polythene insulated and PVC unsheeted Sc Alu cable of 1100V on 7/20 GI Bearer wire for service connection with necessary angle iron upright and end supports for mains SD-67

Supply and fixing of WT bulk head fitting with guard (Philips / Bajaj / Crompton / K. Lite) suitable for11W CFL lamp with CFL SD-83

Supply and fixing of 20mm dia GI Pipe including cost and conveyance all labour charges etc complete.

HSC Connection in PVC Mains for Water Supply Scheme - Providing suitable 63x20 mm dia PVC Saddle inserted for tapping outlet suiting for ½”, 3/4” &1” clear bore

Common Items for HSC Connection - PBrass Ferrule as per IS 319 grade of sizes 15mm, 20mm and 25mm size and threaded as per IS:1554 BSPT, ISO:7-1 to suit the corresponding bore sizes of 15mm, 20mm and 25mm dia size ( 1/2", 3/4" and 1") in the saddle Connection as per IS :1554 BSPT, ISO:7-1 (20mm) 15 mm

Poly Propylene compression Female Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK for connecting 15mm, 20mm and 25mm outlet points of Brass ferrule of sizes 15mm, 20mm and 25mm respectively. (20mm)

Poly propylene 90 Degree Compression elbow with compression joint at both ends as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes - 20mm

Poly Propylene compression Female Threaded Elbow with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes - 20mm

Poly Propylene compression Male Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes - 20mm

MDPE PE 80 PN16 Blue pipe as per standards ISO 4427 and Tested as per BS 6920 in WRC-NSF LTD, UK - 20mm

Earthwork Excavation for 20mm PVC pipe laying work including cost of Refilling work as per Standard Specifications 20B (in Rm)

Labour Charges for Laying & Jointing 20 mm pipe in Excavated Trench in Proper Camber

Supply & Laying & Jointing 20 mm PVC Elbow (Mould) BIS 7834/1975 Part V for Tap Connection

Supply & Jointing 20 mm SS/brass tap (Local rate)

U PVC ball valve with one side compression end and other side female end as per ISO 4422-4 and Tested as per BS 6920 in WRC-NSF LTD, UK,size : 20mm ODx1/2"ID, 25mm ODX1/2"ID and 32mm OD X 3/4" ID - 20mm

Supply and delivery flow control valve for 20LPCD - 20mm dia

Labour charges for Drilling,Cutting and fixing ferrules in distribution line

Supply and delivery of the MS clamp and fixing in wall in open space with required screw etc

Cutting MDPE Pipes and specials true axis and finishing the end complete

Cutting of old Cement Concrete road for laying the 20mm pvc pipe

Cement concrete 1:4:8 mix using 20mm ISS metal including cost and all cost and conveyance of materials and all labour charges etc complete

Cement concrete 1:2:4 mix using 20mm ISS HBG metal including cost and conveyance and all other labour charges etc complete.

Electro Chloranation Disinfection - common salt as per TWAD SOR - page no -57 clause 21.2

Extension of PVC Delivery Line andProviding FHTC's at Kammapatcheri Village and Puthukudi Panchayat in Kadayanallur Panchayat Union.

S/D 63mm 4 KSC PVC Pipe

Earth work excavation with an initial lead and lift in hard stiff clay, black cotton, hard red earth, sub murram gravel, stone and earth mixed boulders as per SS20B for pipe laying work.

Refilling the excavated portions for Pipe Laying works with excavated earth as per ss20 B etc., complete.

Labour charges for Laying of GI, PVC rigid pipes with lead of 200m lowering into trench, laying in proper grade, alignment, jointing PVC coupler with specials and tested to the required pressure including conveyance of water upto 1km lead during the testing etc., complete.

63mm PVC Pipes 4Ksc

HSC Connection in PVC Mains for Water Supply Scheme - Providing suitable 63x20 mm dia PVC Saddle inserted for tapping outlet suiting for ½”, 3/4” &1” clear bore

Common Items for HSC Connection - PBrass Ferrule as per IS 319 grade of sizes 15mm, 20mm and 25mm size and threaded as per IS:1554 BSPT, ISO:7-1 to suit the corresponding bore sizes of 15mm, 20mm and 25mm dia size ( 1/2", 3/4" and 1") in the saddle Connection as per IS :1554 BSPT, ISO:7-1 (20mm) 15 mm

Poly Propylene compression Female Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK for connecting 15mm, 20mm and 25mm outlet points of Brass ferrule of sizes 15mm, 20mm and 25mm respectively. (20mm)

Poly propylene 90 Degree Compression elbow with compression joint at both ends as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes - 20mm

Poly Propylene compression Female Threaded Elbow with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes - 20mm

Poly Propylene compression Male Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes - 20mm

MDPE PE 80 PN16 Blue pipe as per standards ISO 4427 and Tested as per BS 6920 in WRC-NSF LTD, UK - 20mm

Earthwork Excavation for 20mm PVC pipe laying work including cost of Refilling work as per Standard Specifications 20B (in Rm)

Labour Charges for Laying & Jointing 20 mm pipe in Excavated Trench in Proper Camber

Supply & Laying & Jointing 20 mm PVC Elbow (Mould) BIS 7834/1975 Part V for Tap Connection

Supply & Jointing 20 mm SS/brass tap (Local rate)

U PVC ball valve with one side compression end and other side female end as per ISO 4422-4 and Tested as per BS 6920 in WRC-NSF LTD, UK,size : 20mm ODx1/2"ID, 25mm ODX1/2"ID and 32mm OD X 3/4" ID - 20mm

Supply and delivery flow control valve for 20LPCD - 20mm dia

Labour charges for Drilling,Cutting and fixing ferrules in distribution line

Supply and delivery of the MS clamp and fixing in wall in open space with required screw etc

Cutting MDPE Pipes and specials true axis and finishing the end complete

Cutting of old Cement Concrete road for laying the 20mm pvc pipe

Cement concrete 1:4:8 mix using 20mm ISS metal including cost and all cost and conveyance of materials and all labour charges etc complete

Cement concrete 1:2:4 mix using 20mm ISS HBG metal including cost and conveyance and all other labour charges etc complete.

Extension of PVC Delivery Line and Providing FHTC's at Puthukudi Village and Puthukudi Panchayat in Kadayanallur Panchayat Union.

S/D 63mm 4 KSC PVC Pipe

Earth work excavation with an initial lead and lift in hard stiff clay, black cotton, hard red earth, sub murram gravel, stone and earth mixed boulders as per SS20B for pipe laying work.

Refilling the excavated portions for Pipe Laying works with excavated earth as per ss20 B etc., complete.

Labour charges for Laying of GI, PVC rigid pipes with lead of 200m lowering into trench, laying in proper grade, alignment, jointing PVC coupler with specials and tested to the required pressure including conveyance of water upto 1km lead during the testing etc., complete.

63mm PVC Pipes 4Ksc

HSC Connection in PVC Mains for Water Supply Scheme - Providing suitable 63x20 mm dia PVC Saddle inserted for tapping outlet suiting for ½”, 3/4” &1” clear bore

Common Items for HSC Connection - PBrass Ferrule as per IS 319 grade of sizes 15mm, 20mm and 25mm size and threaded as per IS:1554 BSPT, ISO:7-1 to suit the corresponding bore sizes of 15mm, 20mm and 25mm dia size ( 1/2", 3/4" and 1") in the saddle Connection as per IS :1554 BSPT, ISO:7-1 (20mm) 15 mm

Poly Propylene compression Female Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK for connecting 15mm, 20mm and 25mm outlet points of Brass ferrule of sizes 15mm, 20mm and 25mm respectively. (20mm)

Poly propylene 90 Degree Compression elbow with compression joint at both ends as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes - 20mm

Poly Propylene compression Female Threaded Elbow with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes - 20mm

Poly Propylene compression Male Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes - 20mm

MDPE PE 80 PN16 Blue pipe as per standards ISO 4427 and Tested as per BS 6920 in WRC-NSF LTD, UK - 20mm

Earthwork Excavation for 20mm PVC pipe laying work including cost of Refilling work as per Standard Specifications 20B (in Rm)

Labour Charges for Laying & Jointing 20 mm pipe in Excavated Trench in Proper Camber

Supply & Laying & Jointing 20 mm PVC Elbow (Mould) BIS 7834/1975 Part V for Tap Connection

Supply & Jointing 20 mm SS/brass tap (Local rate)

U PVC ball valve with one side compression end and other side female end as per ISO 4422-4 and Tested as per BS 6920 in WRC-NSF LTD, UK,size : 20mm ODx1/2"ID, 25mm ODX1/2"ID and 32mm OD X 3/4" ID - 20mm

Supply and delivery flow control valve for 20LPCD - 20mm dia

Labour charges for Drilling,Cutting and fixing ferrules in distribution line

Supply and delivery of the MS clamp and fixing in wall in open space with required screw etc

Cutting MDPE Pipes and specials true axis and finishing the end complete

Cutting of old Cement Concrete road for laying the 20mm pvc pipe

Cement concrete 1:4:8 mix using 20mm ISS metal including cost and all cost and conveyance of materials and all labour charges etc complete

Cement concrete 1:2:4 mix using 20mm ISS HBG metal including cost and conveyance and all other labour charges etc complete.

GST Amount for providing Service to Government Contract Works for the above RENEWAL Works. { GST Amount is the Total GST Amount for overall quoted amount above this row in column "BB" for all works in this package} (Refer Clause 13.2 & 13.3 of Section 2 of Instruction to Bidders (ITB) of SBD)