PROVN OF SHED OF DG SET AND STORE ROOM AND WATER TANK ON ELEVATED WATER TANK FOR NFS NODE SHILLONG PROVN OF 01 X TOILET AT NFS NODE SHILLONG AND ADDN/ALTN TO BLDG NO CANTT 35A AND CANTT35H IN ANJALEE COMPLEX AT SHILLONG CANTT.UNDER GE SHILLONG

Amount

Dismantling boarding any description fixed in any position with nails complete all as specified and as directed.

Demolition of Brickwork/solid concrete block work built in Cement mortar complete all as specified and as directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

S&F pre-painted Galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick as in roof covering including fixing with self driving machine made screws with washers and fitting of same manufacture of approved profile, shape and colour complete all as specified and directed

S&F pre-painted Galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick as in roof covering including fixing with self driving machine made screws with washers and fitting of same manufacture of approved profile, shape and colour complete all as specified and directed

S&F 2 mm thick fibre reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof , wall etc complete all as specified and as directed

S&F Steel work in tublar trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade ST-240 complete all as specified and as directed.

S&F 15/16 mm thick pvc boards fixed with screws to timber frame complete all as specified and as directed

S&F 12 mm thick pvc boards fixed with screws to timber frame complete all as specified and as directed

S&F 0.90 mm thick pvc decorative laminates type 1 of surface finish color and pattern as approved fixed with approved adhesive as per manufactures instruction complete all as specified and as directed.

S&F brass 150 mm long barrel tower bolts with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and as directed.

S&F brass 100 mm long barrel tower bolts with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and as directed.

S&F extruded fancy type Brass handles fabricated type of size 150 mm complete all as specified and as directed.

S&F extruded fancy type Brass handles fabricated type of size 100 mm complete all as specified and as directed.

S&F butt hinges 100 mm extruded brass with mild steel hinge pin bright polsihed and fixed type B-11 complete all as specified and as directed.

S&F powder coated (min powder coating 50 micron) anodised aluminium frame for doors, windows , ventilators plain or sliding type with one or more rebates including joining cleat for fixing etc complete all as specified and as directed

S&F powder coated(powder coating min 50 micron) anodised door shutters , aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber neoprene packing , handles 2 nos in each door , hinges , anodised aluminium snap beading screws etc complete all as specified

S&F powder coated(powder coating min 50 micron) anodised window and ventilator shutters side hung/sliding type without sash , aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber neoprene packing , anodised aluminium snap beading screws ,anodised aluminium fittings such as peg stays 150 mm long(1 no) hinges type B-21 100 mm long (2 no) suitable handle (1 no ) complete all as specified and as directed.

M&L for 4.80 mm thick sheet glass quality and glazing fixed to aluminium frame exc 0.50 sqm complete all as specified and as directed.

M&L for 4.80 mm thick frosted sheet glass quality and glazing fixed to aluminium frame exc 0.50 sqm complete all as specified and as directed.

M&L for prelaminated particle board of 9 mm thk board ,interior grade ,prelaminated one side with decorative choice lamination & other side balancing , white lamination , fixed with screws to timber frame work complete all as specified and as directed.

M&Lfor precast cement concrete block masonry with solid blocks exc 10 cm in width and settings in CM 1:6 type C1 1:3:6 (20mm graded aggregate) complete all as specified.

M& L for precast cement concrete block massonry with solid blocks nexc 10 cm in width and settings in CM 1:4 type C1 1:3:6 (20mm graded aggregate) complete all as specified.

M & L for 75mm thick PCC 1:4:8 type D2 as in subfloors finished even and rough without using extra cement complete all as specified and as directed.

M&L for vitrified tiles darkshade (square /rectangular) polished area of each tiles not exc0.36 in floors laid over and incl. 20mm thk in CM (1:6) screed bed jointed with neat cement slurry and pointed with coloured cement to match the tiles complete all as specified and as directed..

All as Per Item no 25 above but in vertical surfaces such as skirting / dado laid over and incl. a backing coat of 10mm thk CM 1:4 complete all as specified and as directed.

M&L for preparation of new steel surfaces exc 10cm width or girth and appyling two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed

S&F for stainless steel drawer box 500mm of any colour with provn for double rail rolling system complete all as specified and directed by Engr-in-charge

S&F for stainless steel swing try left or right complete all as specified and directed by Engr-in-charge

S&F for stainless steel carrousel 650 mm dia complete all as specified and directed by Engr-in-charge

S&F for stainless steel soft spring system complete all as specified and directed by Engr-in-charge

S&F for clip on cabinet hinge full overlay complete all as specified and directed by Engr-in-charge

S&F plain stainless steel basket of size 420x485x200mm complete all as specified and directed by Engr-in-charge

S&F plain stainless steel cup & saucer basket of size520x585x100mm complete all as specified and directed by Engr-in-charge

S&F plain stainless steel perforated cutlery basket of size 470x485x100mm complete all as specified and directed by Engr-in-charge

S&F plain stainless steel grain trolley of size 525x485x350mm complete all as specified and directed by Engr-in-charge

S&F ball bearing drawer channel of size 600 mm long complete all as sspecified and as directed by Engr-in-charge

S&F stainless steel single cutlery insert 500mm long complete all as sspecified and as directed by Engr-in-charge

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and as directed.

Excavation in foundation trenches n.exc 1.50m wide and n.exc 1.50m in depth and getting out in soft /loose soil complete all as specified and as directed.

Returning, filling in, including, spreading, leveling, watering and well ramming in layers n.exc 25cm complete all as specified and as directed.

Removing excavated material n.exc 50m and depositing where directed at a level n.exc 1.50m above the starting point complete all as specified and as directed.

Rough excavation not exceeding 1.50 m deep and getting out soft/loose complete all as specified and as directed

Removing excavated material exc 500m and nexc 1.5 km depositing where directed at a level n.exc 1.50m above the starting point complete all as specified and as directed.

M&L for earth filling under floors incl spreading, leveling in layers n.exc 25cm thick including well ramming and watering as reqd complete all as specified and as directed

M&L for PCC (1:4:8) type D-2 using 40mm graded machine crushed stone aggregate as in foundation complete all as specified and as directed.

M&L for RCC 1:1.5: 3 ( nominal mix) using 20mm graded stone aggeregate in foundations, including rafts, footings , plinth beams, bases for columns etc complete all as specified and directed

M&L for RCC 1:1.5: 3 ( nominal mix) using 20mm graded stone aggeregate in columns,pillars ,piers posts complete all as specified and directed

M&L for formwork to sides of concrete foundations,footings, bases of columns, plinth beams and similar work with rough finish surfaces of concrete flat complete all as specified and directed.

M&L for formwork to sides of pillars, posts,struts,piers , columns and like with rough finish surfaces of concrete flat complete all as specified and directed.

M&L for 75mm thick hard core of broken stone or boulders of guage not exc 63mm but n exc 40mm deposited spread and levelled in layers n.exc 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M & L for 100mm thick PCC 1:4:8 type C2 as in subfloors finished even and rough without using extra cement complete all as specified and as directed.

M & L for 40 mm thick PCC 1:3:6 type B1(20 mm graded) as in subfloors finished even and rough without using extra cement complete all as specified and as directed.

M&L for 75 mm thick PCC (1:3:6 ) type C -2 as in Plinth protection finished even and smooth without using extra cement complete all as specified and as directed.

M&L for non skid ceremic white tiles 7 to 8mm thk area of each tile exc 0.06 sqm but n exc 0.11 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to mortar.Laid over and including15 mm thick cement screed bed in CM 1:6 complete all as specified and directed.

M & L Glazed ceramic Coloured Tile 300x450x7mm/300x600x7 mm thick in Skirting, Dados, etc., Set and Jointed in Neat Cement Slurry and Pointed in White or Colour Cement to match laid over a backing coat of 10mm thick CM 1:4 complete all as specified and as directed.

M&L for 18/20mm thk granite slab ( as in table top rubbed and polished) as in counter basin fixed in CM 1:4 , pointing in white cement 1:2 using granite dust with admixture of pigment to match complete complete all as specified and directed.

Labour only for chamfer , splays or arris in facework of Granite not exc 15mm wide complete all as specified and directed.

M&L for providing precast cement concrete set in CM (1:4) type B1 1:2;4 (20 mm graded aggregate) in landings,cover slabs , shelves and similar artilces with plain faces incl formwork complete all as directed and as specified

M&L for Rendering 15mm thick on fair faces of concrete surface of wall in CM (1:4) and mixing with WPC @ 3% by weight of cement finished even and smooth without using extra cement all as specified and directed Note : WPC shall be measured & paid seperatly as supply only.

Supply only Integral waterproofing compound

M&L for rendering 15mm thick on fair faces of brick work in CM 1:6 finished even and smooth without using extra cement complete all as directed and as specified .

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as directed and as specified

M&L for mild steel TMT bars 5 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally in stirrups with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as directed and as specified

S&F iron angle for areal mast, water tank staging and the like incl caps , bases splices etc builtup from two or more beam or channel sections or angles with plates incl all lattice bars stiffers gussets etc of gde Fe-290(Gde E-165) complete all as specified and as directed

S&F Gl frame work for snapgrid false ceiling comprising of Gl perimeter channnel 0.55 mm thick with Main T- flange of 25 mm and web of 30 mm fixed to surrounding wall angle with flange and web 25 mm each , Cross T with flange 25 mm and web 25 mm fixed to main T, Main T is suspended from soffit @ 1200 mmm c/c using GI wire of 4mm thickness GI frame will be 60 x 60 cm to recieve E-board ceiling complete all as specified and as directed .

M&L 4mm thick E Board 600x600 mm prepainted fibre boards ceiling designer/decorative type with different designs as approved by the Engr-in-charge fixed or laid in ceiling timber /GI/ aluminium frame work in ceiling flat or sloping complete all as per manufacturer instruction.

S&F framed work such as grills/ gaurd bars gratings,etc,with ends of bar shouldered or riveted or forged into spikes and similar work inserted into wooden frames to steel window conforming to Fe-290 Gde - 165 complete all as directed and as specified .

M&L for preparation of new steel surfaces nexc 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified.

S&F factory made solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail, panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement supplying and fixing in the fram at site as per specification and drawing complete all as directed and as specified

S&F solid PVC door frame of size 50 mmx 47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube as per specifiecation complete all as directed and as specified

M&L 2nd class hard wood plain solid straight chowkats and frames wrought framed rebated on the solid ,rounded or chamfered ,put together with glue pinned at joints , supplied and fixed complete all as directed and as specified .

S&F 30 mm thk Flush door shutters solid core construction with block board core and ply wood face pannels commercial veneered on both faces complete all as directed and as specified

M&L for preparation of new wood surfaces and applying two coats of synthetic enamel paint over 10 cm width or girth over a coat of pink primer complete all as directed and as specified

S&F aluminium anodised 150 mm long barrel tower bolts with cast or sheet barrel and rolled or cast bolts and fixed complete all as directed and as specified

S&F aluminium anodised 100 mm long barrel tower bolts with cast or sheet barrel and rolled or cast bolts and fixed complete all as directed and as specified

S&F aluminium cast type handles fabricated type of size 150 mm complete all as directed and as specified

S&F aluminium cast type handles fabricated type of size 100 mm complete all as directed and as specified

S&F butt hinges 100 mm medium weight mild steel cold rolled and fixed complete all as directed and as specified

S & F in repairs Vitreous China EWC with P or S Trap including seat cover closed pattern with flat bottom and cover and MS CP hinging device, PVC flush bend pipe incl PVC Flushing Cistern 10 LITRE capacity, Low Level Valve Less, Symphonic Action type, White, with Inlet, Ball Valve, Float and Handle including 32mm dia PVC Flush Pipe, a Pair of Cast Iron Brackets duly Painted/ Erecting Stand including Cutting and Pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 including taking down unserviceable Flushing Cistern and connected Items of any description, complete all as specified and as directed.

S&F vitreous China clay wash hand basin of size 550x400mm oval shape table top complete all as specified and as directed

S&F in repairs CP over head shower dia 100mm round shape single flow (ABS body chrome plated with gray face plate) with rubit cleaning system Cat part No: OHS-1989with CP shower arm dia 20 mm & 450 mm long round shape without bend for wall mounted showers with flange Cat part No: SHA-49483 or equivalent in Prayag/Hindaware/parryware

S&F in repairs CP single lever wall mixer 3-in-1 system with provision for bath hand shower & overhaed shower complete with 115 mm long bend pipe connecting legs & wall flange (without hand & ober head shower) of make Jaquar cat part No:OPP-15125PM or equivalent in Parryware/Prayad/Hindware

S&F in repairs CP Hand shower 24x24 mm sqaure shape single flow with Air effect (ABS body & face plate chrome plated) with Rubit cleaning system of make Jaquar cat part No:HSH-35537 with flexible tube in chrome finish 1.5 m long with nuts of make Jaquar cat part No:SHA-571 or equivalent in Parryware/Prayag/Cera

S&F fancy type CP single lever basin mixer without popup waste with 450mm long braided hoses of make Jaguar Cat Part No:- KUP-35051BPM or equivalent in Marc/Parryware/Prayag

S&F Brass CP 2-in-1 Bibcock with flange of make Jaguar Cat Part No:-ORP-10041PM OR equivalent in Marc/Cera/Parryware

S&F in repairs Soap dish holder of make Prayag Cat Part No:-BA-05 or equivalent in marc/parryware/prayag

S&F Towel ring square shape stainless steel of Make Jaguar Cat Part No:-AKP-35721P or equivalent in Marc/Parryware/Prayag

S&F corner glass shelf with bracket of make Jaguar Cat Part No:CAN-1173 or equivalent in Marc/Parryware/Prayag

S&F 15 mm bore CP health Faucet with Flexible pipe 1.25 m long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified

S&F in repairs Toilet roll holder with stainless steel complete all as specified and as directed

S&F Brass chromium plated bottle traps 32 mm dia for wash basins with inlet and outlet screwed for pipe or connections incl necessary packing uniun and cap and fixed in repairs complete all as directed and as specified

S&F 15 mm Brass CP angular stop cock fancy type with Capstan heads fixed complete all as specified and as directed

S&F 15mm bore CP Bib taps cast copper alloy with crutch or butterfly handle , screwed down for iron pipe fancy type complete all as specified

M&L for 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints ,laid in trenches or in floors complete all as specified and as directed

M&L for 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints ,laid in trenches or in floors complete all as directed and as specified

S&F PVC (SWR) bends 110mm dia complete all as specified and as directed

S&F PVC (SWR) bends 75mm dia complete all as specified and as directed

S&F PVC(SWR) 75mm dia vent cowls complete all as specified and as directed

S&F Stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays ,incl bolts and nuts and securing ends of stays to wall or roof complete all as directed and as specified

S&F PVC Connections 15mm size with PTMT Nuts of length 450mm and fixed, complete all as specified and as directed.

Supply and Laying Steel Water Tubing 15mm dia (Bore), Galvanised, ‘Medium Grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situation, complete as all specified and as directed.

All as per Item above 103 above, but for 20mm dia (Bore) complete all as directed and as specified

S&F cutting chases, pinning in concrete block workmaking good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades shelves, lintels etc, and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exc 10cm girth complete all as directed and as specified

Supply hoisting and fixing rotational moulded HDPE water storage tank ,double layer ,ISI marked (cylendrical vertical type with closed top) of capacity 1000 ltrs in position incl float valve high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed incl dismantling of tank all as specified and directed.

S&F 20mm bore gun-metal globe or gate valves,with iron wheel head ,screwed both ends for iron pipe and fixed

M&L for preparation of new wall surafces and applying two finishing coat of oil bound distempering over 1mm of wall care putty complete all as directed and as specified .

M&L for preparation of new wall surafces and applying two finishing coat of acrylic emulsion paint , anti fungal resistance , dirt resistance exterior paint of required shade including primer coat and 1 mm thk exterior putty on new surfaces complete all as directed and as specified

M&L for steel windows with side hung shutters including projecting type hinges with steel peg stay complete with glazing bars dovetailed or welded complete all as directed and as specified

M&L for preparation of new wall surafces and applying two finishing coat of white wash on walls complete all as directed and as specified

EM PORTION PART -II SCHEDULE Material and labour for Point wiring with 1.50 Sqmm single core PVC insulated , unsheathed cable FRLS, 1100 volt grade with multi stranded copper conductor drawn through and incuding medium grade, ISI marked, in PVC Casing capping on wall/ceiling and incuding provision of 1.50 Sqmm single core PVC insulated , unsheathed cable FRLS, 1100 volt grade with multi stranded copper conductor green colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including mild steel sunken box/metal flush box with suitable steel terminal boxes made out of 1.6 mm thick mild steel sheet metal conforming to IS-5139(pt-I) of 1969 and IS:14772-2000 with earth dolly and coated with two coats of anti corrosive paint over a coat of red oxide primer both internally and externally including provision of new 3 mm thick plastic laminated sheet top cover for housing the switches , socket outlets, fan regulators etc. with brass screws and brass washers and making good the disturbed surfaces as per existing for one light point controlled by one switch. Note :- Switch, socket and fan regulators to be measured and paid for separately .

Description all as per serial item No 112 above but with 4 sqmm cable for 3 pin 15 Amps switch socket outlet (Power point) complete all as specified.

Supply and fix switch piano (ISI marked) Single pole 240 volts, 5Amps all as specified and directed. Make- Havells/anchor/ Legrand.

Supply and fix switch socket combination (ISI marked) 2/3 pin and 5/15 Amps, flush type, 240 volts complete all as specified and directed. Make- Havells/anchor/ Legrand.

Supply and fixing modular switch 1 way 6 A module 230/250 volt , AC supply, ISI Marked, with white cover plate with frame complete all as specified and directed. Make : Cona , Plaza, Anchor, Vinay

Supply and fixing modular switch 1 way 16 A module 230/250 volt , AC supply, ISI Marked, with white cover plate with frame complete all as specified and directed. Make : Cona , Plaza, Anchor .

Supply and fixing modular sockets 6A/16A 2/3 pin combined 2 module 230/250 Volts, 50 Hz , AC supply, ISI Marked, with white cover plate with frame complete all as specified and directed. ake : Cona , Plaza, Anchor, Vinay

Supply and fixing ceiling rose surface bakelite 65x50mm, 3 terminal complete all as specified. Make : Cona , Plaza, Anchor .

Supply and fixing LED batten fittings 1x18 Watt complete pre wired fixed to wall with 2 nos PVC block of suitable size complete all as specified and directed

Supply and fixing LED security Building light LED 25 Watt , pressure die cast aluminum housing, heat resistant glass, IP65 protection, better optics for uniform distribtion complete with all accessories internally pre wired and including connecting up with three core 1.5 sqmm flexible copper conductor cable from ceiling rose to connector of light complete.Make Make:- Bajaj Cat part No- 169821 LED/CG as perr vat No LSTO 25 CDL equivalent model as in Surya / havells .

Supply and fix in repairs MCB, single pole 240 volts 6 to 32 Amps capacity fixed in DB's complete all as specified and directed

Supply and fix MCB Distribution board , 240 volts single pole and neutral ,double door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link, 2 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection, complete all as specified and directed. Make: Havells Cat part No DHDPSHODRW12 or equivalent in Schnieder/GE/C&S.

Supply and fix in repairs MCCB DB 4 way vertical sheet metal enclosure TPN 415 volts, 50 Hz, with IP-43 protection, double door with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting complete all as specified. . (Note : MCB SP/TPN shall be measured and paid seperately under appropriate items of this schedule . Note : Copper thimble shall be used for connection of cable .

Supply and fix MCCB TPN, 240 Volts, 100 Amps, 10 kA rupturing capacity415 Volts complete all as specified and directed

Supply and fix MCB DP, 240 Volts, 40 Amps, 10 kA rupturing capacity 'C' series complete all as specified and directed

M & L for sub main wiring with two runs of single core 6 Sqmm FRLSH copper conductor cable PVC insulated, unsheathed, 1100 V including 20 mm dia concealed on wall/ceiling in PVC conduit, medium grade ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall alongwith one run of 6 Sqmm single core PVC FRLSH insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion complete all as directed.Note: (i) Two runs of 6 sqmm as PVC cable and one run of 6 sqmm cable earth wire and one run of PVC conduit shall be measured as one RM. (ii) Cutting of chases in the wall of appropriate size shall be carried out with electric cutter machine . (iii) Necessary plastering in the disturbed surface of wall and distempering /white washing to match the existing colour shall be included in the unit rate quoted.

M & L for sub main wiring with two runs of single core 4 Sqmm FRLSH copper conductor cable PVC insulated, unsheathed, 1100 V including PVC Casing / capping ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall alongwith one run of 4 Sqmm single core PVC FRLSH insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion inculding taking down old wiring etc complete all as directed.Note: (i) Two runs of 4 sqmm as PVC cable and one run of 4 sqmm cable as earth wire and one run of PVC casing / capping shall be measured as one RM.

Supply, lay in trenches, floors ,fix on wall/pole, passing through pipes etc.,LT UG cable , 1100 volts grade, PVC/ XLPE insulated , with multistranded aluminium conductors, armoured with galvanised steel wire or tape ,gland, lugs etc , of size 16 Sq.mm 2 core , confirming to IS specifications complete all as specified and directed .

Material and labour for earthing complete with galvanised steel earth plate electrode 60 Cm X 60 Cm X 6 mm buried directly in ground vertically to a depth notless than 2.25 mtr deep below ground level with top edge of earth plate at a depth not less than 1.5 m below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of bolts, check nuts and washers ,galvanised steel and protected by GI pipe 15 mm bore light grade & connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6) type C1, precast RCC (1:2:4) type B1 cover slab 30 cm X 30 cmX 5 cm with 10mm dia TMT bars 8 cm C/c both ways and one handle for lifting made out of 8 mm dia TMT bar, funnel, wire mesh, 20mm bore galvanised iron pipe (medium grade) for watering, charcoal or coke and salt in alternative layers, necessary excavation and earth work in any type of soil and including necessary testing complete all as shown in Electrical Plate No 3 of SSR part -I complete all as specified and directed .

Supply and fixing LED lights fitting 1x 20W, 220V,AC decorative box type, warm white / white type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete complete pre wired fixed to wall with 2 nos PVC block of suitable size complete all spcifided and directed.

S & F Mirror wall mounted LED batten fittings with all accessories 1X 12 Watt LED 6000K , warm white / white type extruded polycarbonate, integrated electronic driver and fixed to wall complete all as specified and as directed Make- Philips cat Part 31403 12-Watt LED picture Light (Gold)

S & F Exhaust fan 230 volts , 250mm,plastic body including making all electric connection complete all as specified and as directed including cutting of hole on wall and making good disturbed surface of wall and outer wooden box for fan fix on wall Make Bajaj/Havell's/CG.

Supply and fixing of hot water Geysers of 25 ltrs capacity 5 star rated vertical type includng fixing of bolts , nuts grouted into the wall , and necessary cement work , making good of disturbed surface of wall , giving electric , hot and cold water pipe, tab etc and water connection and testing after installation. Make : Havells cat part no - GHWASEIBO25 /LG/Ronald.

S&F heat resistant PVC connection pipe for hot and cold water 450mm long 15mm dia. Make: Prayag or equivalent in Polytuf/ Havells/ Sona.

S & F single pole and neutral enclosure with a two pin and earth plug and socket with one single pole MCB complete all as specifided and as directed

Supply lay/spread in trenches , river sand ,clean ,including spreading ,levelling ,punning for laying /cushioning of cables all as specified and as directed.

Supply lay in trenches fly ash bricks, old size sub class “B” for cable protection complete all as specifided and as directed

Supply, lay in trenches, floors ,fix on wall/pole, passing through pipes etc.,LT UG cable , 1100 volts grade, PVC/ XLPE insulated , with multistranded aluminium conductors, armoured with galvanised steel wire or tape ,gland, lugs etc , of size 16 Sq.mm 4 core , confirming to IS specifications complete all as specifided and as directed

M/S T N CONSTRUCTION