PROVN OF O/H SHED FROM MAIN GATE TO PRINCIPAL OFFICE IN FRONT OF BLDG NO 5T, SPECIAL REPAIRS FOR IMPROVEMENT OF ELECT SUB STN AND SPECIAL REPAIRS TO REPLACEMENT OF BER SUMMER APPLIANCES AND CERTAIN REVENUE WORK NO. 01, 35, 44, 46, 48, 49, 50 AND 72

Amount

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, shafts, wells, cesspits, manholes, pier holes, laying cables etc. and getting out in soft/loose soil.

M&L for cement concrete M-7.5 grade (Nominal Mix) using 40 mm graded stone aggregate as in foundation filling and mass concrete all as specified.

Removing excavated soil to a distance n exc 50 m and depositing where directed at a level of n.exc 1.5 m above the starting point all complete all as directed.

Returning, filling in including spreading, leveling, watering and well ramming in layers not exc 25 cm thick using excavated soil complete all as directed.

Filling under floor using soil obtained from excavation after removing turf, bolders etc including spreading, leveling, watering and well ramming in layers not exc 25 cm thick using excavated soil all complete all as directed.

M&L for 75mm thick PCC M-7.5 grade (Nominal Mix) using 40mm graded stone aggregate as in sub base floor complete all as specified and directed.

M&L 25mm thick PCC M-15 grade (Nominal Mix) using 20mm graded stone aggregate as in floor complete all as specified and directed.

S&F for coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified.

S&F for coloured Non - skid Ceramic tiles 7-8mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified.

S&F for glazed ceramic tiles on vertical surface of size 300x 200 x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over & including 10mm thick rendering in CM 1:4 as in backing coat complete all as specified and directed.

M&L for Brickwork with old size fly ash bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:4 complete all as specified.

M&L for Brickwork with old size fly ash bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified.

M&L for Brickwork with old size fly ash bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified.

M&L rendering 15 mm thick (10mm + 5mm) plaster on other than fair face of brick work in CM 1:4 and surface finished even and fair by mixing liquid water proofing compound in finishing coat as per manufacturers instructions complete. Note :- WPC shall be measured & paid seprately under relevant item of this BOQ.

M&L for rendering 15 mm thick on other than fair faces of brick wall or concrete surface in cement mortar 1:6 finished even & fair all as specified and directed.

M&L for rendering 10 mm thick in cement mortar 1:4 ceiling surfaces finished even and fair all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint including scaffolding, trestles, ladders, cradles and necessary safety measures complete all as specified and as directed.

M&L for preparation of newly plastered surface of wall and applying three coats of white wash complete all as specified and directed.

M&L for preparation of newly plastered surface of ceiling and applying three coats of white wash complete all as specified and directed.

M&L for hardcore of broken stone or boulder gauge n exc 63mm, deposited, spread and levelled in layers n exc 15cm thick watered and rammed to true surface.

M&L for 75 mm thick plain cement concrete M-10 grade (Nominal Mix) using 20 mm graded stone aggregate as in plinth protection surfaces finished even and smooth without using extra cement including filling the joints by bitumen and sand mixed in the ratio 1:1 by weight complete all as directed.

M&L sand stone slabs in sunshades, chajjas, shelves, cills, landings, cover stones, templates, etc n.exc 2m in length, punched dressed on face and along exposed edges, self faces on other side and set and pointed in lime mortar 1:3 or cement mortar 1:4 complete all as specifed and directed.

M&L for 75 mm thick plain cement concrete M-7.5 grade (Nominal Mix) using 20 mm graded stone aggregate as in floor complete all as directed.

M&L for steel reinforcement of TMT bars (FE-500 Grade) 10 mm dia and over cut to length and bent to shape required including cranking bending spirally for hooping for columns hooking end and binding with mild steel wire ( annealed ) not less than 0.9mm dia or securing with clips all as specified and directed.

M&L use & waste of steel form work (rough finished flat) to sides and soffit of roof slab, shelves etc complete all as specified and as directed.

M&L for use & waste of steel form work (rough finished flat) to edges of roof slab, shelves etc n. exc 200mm thick etc complete all as specified and as directed.

M&L for use & waste of steel form work (rough finished flat) to sides and soffits of floor or roof beams,lintiles cantilever etc complete all as specified and as directed.

M&L for RCC M-25 grade (design mix) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like & similar RCC works all as specified and directed.

M&L for providing RCC M-25 grade (Design mix) 20mm graded stone aggregate in lintel/chajja

S&F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube as per specification & drawings in SSR Part II of 2010.

S&F factory made solid panel PVC moulded door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for style and plain colour PVC sheets for top rail & bottom rail Panelling plain colour PVC sheet to be fitted in MS frame welded/sealed to the style & rails with suitable PVC sheet beading as per specification & shown on drawing in SSR Pt II of 2010 complete all as specified.

S&F 100mm butt hinges, extruded brass, with mild steel hinge pin, bright polised and fixed, type B-11 all as specified and directed

S&F vitreous china wash hand basin,white, flat back size 580x450 mm including CP pillar tape fancy type suitable for 15 mm bore pipe 32 mm bore CP brass waste coupling and brackets complete all as specified.

S&F Vitreous China wash down water closet pan (pedestal pattern), white including Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device fixed complete all as specified and directed.

S&F PVC valveless, syphonic action type, flushing cistern, 10ltr capacity low level, white, with inlet 32mm dia PVC pile, ball valve, float and handle including brackets complete all as specified.

Supply and fix 32mm dia waste pipe 750 mm long fixed to waste coupling and to grating complete all as specified and directed. Make:- Poly plsdy/Prayag/Symet.

S&F 15 mm bore fancy type Chromium plated stop valve cast copper alloy scap screwed one ends to iron pipe or for unions and other end by PVC connection all as specified.

S&F bib taps chromium plated cast copper alloy with crutch or butter fly handle screwed down, screwed for iron pipe of bore 15mm complete.

S&F in repair bib taps chromium plated cast copper alloy with crutch or butter fly handle screwed down, screwed for iron pipe of bore 15mm complete.

S&F in repair chromium plated brass, angle valves, fancy type screwed both ends high pressure, for 15mm bore size iron pipe or ferrule complete all as specified and directed.

S&F shower rose with swivel joints bress chromium plated any size, fixing to steel pipe or union complete all as specified and directed.

Supplying & fixing to walls and ceiling 15 mm nominal bore, medium grade, galvanised coated steel tube conforming to IS 1239 (Part-1): 2004 including all fittings conforming to IS 1239 (Part-2): 2011 complete all as specified and as directed.

Supplying & fixing to walls and ceiling 20 mm nominal bore, medium grade, galvanised coated steel tube conforming to IS 1239 (Part-1): 2004 including all fittings conforming to IS 1239 (Part-2): 2011 complete all as specified and as directed.

Supplying & fixing to walls and ceiling 20 mm nominal bore, medium grade, galvanised coated steel tube conforming to IS 1239 (Part-1): 2004 including all fittings conforming to IS 1239 (Part-2): 2011 complete all as specified and as directed.

M&L for cutting chases, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps,cills, sunshades, shelves,lintels,etc; and cutting chases for concealed water tubing etc, and making, cutting not exc15 cm girth.

S&F steel ventilators with top hung shutter including hinges, steel pag stay complete with a shop coat of red oxide primer all as specified and directed.

S&F PVC (SWR) floor trap plain with grating including jointing with solvent cement dia of out let 75 mm including stainless grating fixed complete all as specified and as directed.

S&F salt glazed stone ware (SGWR) gully traps, square mouthed type 'P' 150x150mm complete all as specified and directed.

S&F PVC (SWR) 110 mm dia bends any radious all as specified and directed.

S&F 110 mm dia PVC (SWR) pipes type 'A' single socketed in any length with rubber ring joints laid in trenches.

S&F 75 mm dia PVC (SWR) pipes type 'A' single socketed in any length with rubber ring joints laid in trenches.

S&F PVC (SWR) bends 75mm bore with or without oval excess door complete all as specified and directed.

M&L salt-glazed stoneware drain pipes 150mm dia grade 'A' laid in trenches and jointed as specified.

M&L for Concrete bed in PCC M-10 grade (Nominal Mix) using 40mm graded stone aggregate to drain pipes 100 mm bore pipe including packing under, and haunching against the sides of pipes after they are laid and tested all as directed.

S&F 15 mm bore PVC connection with PTMT nuts of length 450 mm.

S&F in repair 110 mm dia PVC (SWR) junction single, (Single T) equal or unequal complete all as specified.

S&F in repair 20 mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed complete. (Minimum weight 20mm-210gms).

S&F 500 liters capacity rotational moulded polyethylene three layer water storage tank (Cylindrical vertical with close top) hoisted and fixed in position including connections including dismantling existing old water storage tank all as specified.

S&F PVC (SWR) vent cowl 110mm bore complete all as specified and directed.

S&F for MS work such as hold fasts etc or similar small articles conforming to Fe-410-0 or Fe-310-0 all as specified

M&L for Aluminium frame (sliding, fixed or casement) powder coated (minimum thickness of powder coating shall not be less than 50 micron) for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F Powder coated (Minimum thickness of powder coating shall not be less than 50 micron of approved colour) aluminium window and ventilator shutters, side hung/ sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.)/ Pair of rollers at bottom of shutter, suitable handle (1 no.)/ Mortice type side locking arragement in shutter complete all as specified and as directed. Note : (i) Glass panes shall be measured & paid separately . (ii) The quoted rate shall be inclusive of cost of rubber beading however it shall not be weighed and shall not be paid separately. (iii) The quoted rate shall be deemed to include the cost of peg stay, hinge & handle locking arrangment etc.

S&F for 5.5mm thick tinted glass in squares exc 0.5sqm each pane including rubber jointing cleat for fixing in position for aluminium door complete all as specified and directed.

S&F 200 mm size aluminium anodized barrel tower bolts of extruded section and fixed.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc.

Taking down cement or cement lime plaster on brick or stone walls, etc. including racking out joints,hacking for key, scrubbing down with water, etc.

M&L for coloured Glazed ceramic tiles on vertical surface 450x 350x 7mm thick set and jointed in dado/skirting over & including 10mm thick rendering in CM 1:3 as in backing coat & pointed in neat cement slurry and jointed in white or colour cement to match.

M&L for 40mm thick Damp proof course in cement concrete M-15 grade (Nominal mix) using 12.50mm graded stone aggregate on horizontal or vertical surfaces including water proofing compound & necessary form work all as specified. Note : Water proofing compound shall be measured and paid for separately under relevent item of this BOQ

M&L for providing RCC M-25 grade (Design mix) 20mm graded stone aggregate in Beams, cantilevers, bressummers, lintels & similar works all as specified and directed.

M&L use and waste of steel formwork (rough finish flat to chajjas complete all as specified and directed.

Removing excavated soil to a distance exc 250m but n exc 500m and depositing where directed at a level of n.exc 1.5m above the starting point all complete as specified and directed.

M&L for steel reinforcement of TMT bars (FE-500/550 Grade) 8 mm dia as in stirrups cut to length and bent to shape required including cranking bending spirally for hooping for columns hooking end and binding with mild steel wire ( annealed ) not less than 0.9mm dia or securing with clips all as specified and directed.

M&L for rendering 5 mm thick in cement mortar 1:3 on concrete surface of slab, beam & ceiling surfaces finished even and fair all as specified and directed.

Supply only liquid water proofing compound hydroseal-W+ / Dr Fixit or eqivalent (for plaster hardening, to contol efflorescence & fungal growth) as approved by GE.

M&L for rendering 10 mm thick on other than fair faces of brick wall or concrete surface in cement mortar 1:6 finished even & fair all as specified and directed.

M&L preperation of newly plastered surfaces of wall & applying two coats of oil bound distember over a coat of alkali resistant primer complete.

M&L for preparing newly plastered surfaces of walls/ceilings and applying two coats of weather proof acrylic exterior paint (100% Acrylic) over one coat of self primer including scaffolding, trestles, ladders, cradles and necessary safety measures complete all as specified and as directed.

M&L for providing 40mm thick cement concrete M-15 grade (Nominal Mix) using 20mm graded stone aggregate as in flooring finishing cement concrete surface even and smooth using extra cement complete all as specified and directed.

Surface excavation in soft/loose soil, not exceeding 30cm deep and averaging 15cm deep and getting out in soft/loose soil.

M&L for 50 mm thick plain cement concrete M-10 grade (Nominal mix) using 20 mm graded stone aggregate as in plinth protection surfaces finished even and smooth without using extra cement including filling the joints by bitumen and sand mixed in the ratio 1:1 by weight complete all as directed.

S&F pressed steel frames of size 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc with shop coat of red oxide primer complete all as specified and directed.

M&L cement concrete M-10 grade (Nominal mix) using 20mm graded stone aggregate as in blocks for fixing hold fasts and fillling of chowkhats or any other purpose all as specified.

M&L for prepration of primed steel surfaces, exc 10 cm width or girth and applying two coats of synthetic enamel paint all as specified and as directed by Engineer-In-Charge.

S&F 35mm thick IInd class Hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) supplied and fitted to chowkats.

S&F 35 mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides.

S&F 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed.

Supply & fix 150 mm long aluminium handles fabricated type anodised all as specified.

S&F 100 mm size aluminium anodized barrel tower bolts of extruded section and fixed.

Surface excavation in soft/loose soil, not exceeding 15cm deep and getting out in soft/loose soil.

Surface excavation in soft/loose soil, not exceeding 30cm deep and averaging 10cm deep and getting out in soft/loose soil.

Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface

M&L for cement concrete M-15 grade (Nominal mix) using 20 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified.

M&L for mild steel work in tubular trusses, purlins, vetical posts including special shaded washer, angle cleats, fish plates, gusset plates, base/bearing plates, bolts and nuts etc complete using ERW or induction butt welded tubes confirming to 1161-1979 grade St 240 complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as per IS 15965: 2012 in roof covering with self tapping screws complete.

S&F Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as per IS 15965: 2012 in cladding to wall, covering around to E/M installations fixed with self tapping screws as specified.

S&F MS flat iron wind ties for roof including all necessary drilling, bolting or riveting etc complete all as specified and directed.

M&L for use & waste of steel form work (Rough finish flat) to sides of pillars, posts and columns surface square/rectangular of concrete complete all as directed.

M&L for RCC M-25 (desing Mix) as in pillars, posts column etc complete all as specified and directed.

M&L for rendering 10 mm thick on other than fair faces of brick wall or concrete surface in cement mortar 1:4 finished even & fair all as specified and directed.

M&L for Machine cut machined polished kota stone slab flooring 18-20mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing with mechanical scrubber over and including 20 mm thick screed bed or bedding layer in cement mortar 1:3 complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10 cm in width or girth and applying two coat of synthetic enamel paint over a coat of Red Oxide primer all as specified.

M&L for preparation of new steel surfaces n.exc 10 cm in width or girth and applying two coat of synthetic enamel paint over a coat of Red Oxide primer all as specified.

M&L for sand filling under floors including consolidation etc for laying paver blocks complete.

S&F Steel work in trusses fabricated with rectangular/Square hollow section, including special shaped, washers etc including cutting welding, bending in shape etc using tube of YST 310 grade confirming to to IS-4923 complete all as specified & directed.

M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade made with grey cement and pigment complete all as specified and directed.

M&L TMT bars 5mm dia and over upto and inlcuding 10mm dia in stirrups spaces and binders TMT bars complete all as specified and as directed.

M&L for providing Cement concrete M-15 (nominal mix) using 12.5 mm graded stone aggregate as in coping including necessary formwork etc complete.

M&L for 20mm thick granite (of any type) tiles machine cut in skirting/dado laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone over and including 10mm thick rendering in cement mortar 1:4 complete all as specified.

M&L for MS work as in gates of angle or other section pattern, ornamental type fixed to walls with pintel hinges all as per design approved by Engr-in-Charge.

Supply only chain link fencing made out of mild steel galvanised wire of any size all as specified and directed.

Fixing only chain link fencing of description fixed to steel post with mild steel flat & nut bolt etc. (i) Supply only fencing will be measured and paid separately. (ii) Supply and fix mild steel nut bolt, line wire and flat will be measured and paid separately.

Supply and fix mild steel section for post and struts for fencing including cutting top to shape as directed drilling hole notching for wire etc or flat iron fillet (for securing wire mesh etc) including all necessary drilling tolting, using steel section of grade E-165 (Fe-290) complete.

M&L for cement concrete M-10 grade (Nominal mix) as in bed to drain pipes incl packing under and hauching against the sides of pipes after they are laid and tested for 150mm bore.

M&L for providing cement concrete M-15 grade (Nominal mix) as in surface channels, benchings etc of manholes finished fair and even complete.

Extra for forming fair finished channel or drain 30cm ginth (inner ginth) in cement concree using extra cement incl forms mounds stopped complete.

M&L reinforced cement concrete M-25 grade (Design Mix) as in slab supported on walls, beams and columns in floor, roof, beams and shelves etc for soak well/septic tank in running and manhole cover slab with plain fair faces and set in CM 1:4 condition complete all as specified.

M&L for 100mm thick cement concrete M 7.5 grade (Nominal Mix) using 40mm graded stone aggregate as in sub base flooring complete.

S&F 12mm thick PVC solid board Jafry fixed with self tapping screws to steel framed work all as specified and directed.

M&L stainless steel grade 304 mirror polished, framed work as in square tube 25mmx25mmx2mm including cleats and nut & bolt fixed to walls as directed at site complete.

S&F Framed work such as grills gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165

Demolition of cement concrete in ground floors and pavings n.exc 15cm thickness (Below or above ground level)

M&L for cutting holes in brick walls in mud mortar for inserting holdfasts and makng good dismantled portion in cment mortar 1:3 or cement concrete 1:2:4 type B1 as required exc half brick but not exc one brick complete all as speified and directed.

S&F 105x60 mm Pressed steel frames made out of 1.25mm steel sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., with one shop coat of red oxide primer complete, as specified, supplied and fixed all as specified and as directed.

S&F in repair 300mm size mild steel rat tail rod pattern door springs ISI marked including roller & roller plate etc complete.

M&L for prepration of new wooden surfaces, exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified and as directed by Engineer-In-Charge.

Taking up or down 25 mm bore of steel tubing and connections, including cleaning for refixing or removal to store complete all as specified.

Taking up or down 20 mm bore of steel tubing and connections, including cleaning for refixing or removal to store complete all as specified.

Taking up or down 15 mm bore of steel tubing and connections, including cleaning for refixing or removal to store complete all as specified.

S&F Gun matel, globe or gate valves 25 mm bore dia, with iron wheel head, screwed both ends for iron pipe and fixed.

S&F in repair vitreous china squatting pan, Orissa pattern size 580x440mm white, including 10ltrs PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet ball valve, float and handle including brackets, flush pipe of polyethylene 32mm dia, for low handle including brackets, flush pipe of polyethylene 32mm dia for low level cistern etc complete.

S&F PVC connection 15mm size with brass nut of 600mm long complete.

S&F in repair Vitreous China wash basin, white, flat back, size 550x400mm including brackets,waste coupling including brackets incl fittings like 15mm dia PVC connection 75cm long and waste pipe of 32 mm dia all as specified and directed.

S&F in repair vitreous china bowl urinal flat back size of 465x355x265mm incl providing and fixing plugs, bedding urinal against wall in cement mortal 1:2 securing urinal to plugs with incl inl 60mm long brass screws, pointing around urinal back in cement, fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe (Exclusive of fixing supply of pipe to flushing cisern, tap and waste pipe complete.

S&F in repairs CP brass chromium plated towel rail 20 mm dia D type 600 mm long with brackets complete.

M&L for cutting chases, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps,cills, sunshades, shelves,lintels,etc; and cutting chases for concealed water tubing etc, and making, cutting not exc10 cm girth.

S&F CP chromium plated brass pillar cock suitable for counter to WHB Cat No. OPP-15001PM of Jaquar or equivalent.

S&F PVC (SWR) gully trap 125mm, setting and jointing with solvent cement all as specified.

S&F 32mm bore waste fittings, brass, chromium plated for glazed ware sinks, basins, etc with long screwed shanks and fly nuts, flange end bedded in red lead cement and other and fixed complete.

Demolition of brick work or stone boulder masonary built in cement mortar including all quoins arches pillars etc. but excluding ashlar facing dressed stone work and precast concrete articles.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

M&L for light shade Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed or bedding layer in cement mortar 1:4 complete all as specified and directed.

M&L for RCC M-15 grade (Nominal Mix) using 20 mm graded stone aggregate as in platform deck slabs and in shelves and the like complete all as specified and directed.

M&L for 20 mm thick Granite black (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick screed bed in cement mortar 1:4 complete.

M&L for rendering 10 mm thick in CM 1:6 on than on brick or concrete surfaces and finished surface even & fair on wall complete all as specified.

M&L for complete removal of existing treatment of old surface including brooming down / steel wire brushing, scrapping down smoke soot,mould, moss and efflorescent salts and trading oil and grease spouts and cleaning with water on wall and applying two coats of oil bound distemper and including one coat of cement base birla wall care putty complete all as sepcified.

Taking down Chowkhats or frames with shutter without taking off shutters from the frames not exc. 1.5 sq. m each.

Taking down Chowkhats or frames with shutter without taking off shutters from the frames exc 1.5 sq. m but n exc 4 sq. m each.

S&F 5.5 mm Sheet glass, ordinary quality glazing in square n exc 0.5 sq. m in each pane complete.

S&F 5.5 mm Sheet glass,ordinary quality glazing in square exc 0.5 sq. m in each pane complete.

M&L for preparation of old ceiling surfaces and applying three coats of white wash complete all as specified and directed.

S&F CP brass bib tap long body chromium plated 15 mm bore complete all as specified

S&F 15 mm size angular cock, cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed both end for iron pipes complete.

S&F sinks made of stainless steel l.00 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm including waste coupling complete all as specified and directed.

S&F 15 mm dia brass chromium plated pillar tap long shank with fly nuts capastan head screwed down high pressure with or without lettered hot or cold with long screwed shank complete.

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long

S&F stainless soap dish fixed to wall complete all as specified and directed.

S&F 18 mm thick PVC solid Kitchen PVC Sheet one side prelam sheet kitchen cabinet shutter of density 600 kg/cum bent at 90 degree and finish all edges at level for making edge lipping/bending or 0.5 mm thick PVC sheet lipping at all four edges using bonding lape etc complete as per direction of Engineer in charge Manufacture's specification.

S&F factory made PVC Cabinet of required size fabricated by joining 12 mm thick PVC celuka ply fixed with each other using solvent cement fixed with screw and solvent cement adhesive etc. complete as per specifications and as directed by the Engineer - in -charge.

S&F vitreous china wash hand basin,white, flat back size 550x400 mm suitable 32 mm bore CP brass waste coupling and brackets complete all as specified.

S&F 15 mm bore PVC connection with PTMT nuts of length 450 mm.

S&F stainless steel tutular tower rail 20mm dia including brackets fixed to wall complete all as specified.

S&F 18mm thick factory made PVC shelf/partion of required size consisting of panel of celuka PVC ply and for supporting the hold of shelf /partion and shall provided 3 edges in size18 mmx 18mm as per required lengththe front side of the edge visible in the front of the shelf /partion to be edge lipped by 18 mm widthx1mm thick PVC sheet of density 600 kg/cum manufactured by complete by direction of Engr-in-charge.

S&F Ball bearing runners 45 mm Telescopic (KTS-20) full extension load capacity 50 kg. Make:- KAFF/Godrej/Hettich

S&F magnetic catcher (KTS-20) full extension load capacity 8kg. Make:- KAFF/Godrej/Hettich.

S&F stainless steel handles 100 mm size for kitchen cabinet shutters

S&F stainless steel Tower bolt 75mm size for kitchen cabinet shutters

S&F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised Width of flaps (When open) in mm 40mm

S&F speed bump 50mm height made of strudy plastic high resitance precoloured (Black and Yellow) bottom of bumps to be filled with cement concrete 1:1:5:3 and cured bump studded with refectors on either side complete (350x 250 mm ) size fixed with epoxy and bolts by driling 6mmx75 mm dia fasteners as per manufacture instruction complete all as specified and directed. Make :- Model No dA 1005 OF DARK EYE OR EQUIVALENT IN MAKES ALEXIX/3M/AVERY DENNISION/TATA/SURYA /PIONEER SWIFT Simens, Road Star, Dary Eye

M&L for cement concrete M-10 grade (Nominal mix) using 40mm graded stone aggregate as in surface channels and drians all as specified

M&L for cement concrete M-10 grade (Nominal mix) using 25mm graded stone aggregate as in surface channels and drians all as specified

M&L for forming fair finished drain or channel 20cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc.

M&L PCC M-15 grade (Nominal mix) using 20mm graded stone aggregate as in coping edging to interlocking tiles etc. complete all as specified and directed.

M&L PCC M-15 grade (Nominal mix) using 20mm graded stone aggregate as in cover slab complete all as specified and directed.

M&L for preparation of new steel surfaces exc 10 cm in width or girth and applying two coat of black bituminous paint over a coat of Red Oxide primer all as specified.

Excavation in trenches in soft/loose/hard soil / PCC Path not exceeding 1.5 mtr in depth and not exceeding 1.5 mtr wide for laying of cables and getting out all as specified and as directed by Engr-in-Charge.

Material and labour for point wiring with 1.5 sq mm PVC insulated unsheathed single core multi-stranded copper conductor cable 1100 Volts grade, (FRLS) drawn through and including 20 mm dia rigid non-metallic PVC concealed conduit (medium grade) along with 1.5 sq mm continuous PVC insulated unsheathed solid/stranded copper conductor cable for earth continuity wire, connected to earth dolly and to be terminated in modular flush metal boxes readily available and suitable for modular fittings, concealed type, covered with modular plates for mounting modular switches, sockets, regulators etc including testing on completion complete all as specified and as directed by the Engineer-in-Charge. Note:-Point wiring for Trusses structure/shed shall be done surface type as per site requirement with suitable fixing arrangement and rate for the same included in quoted rate of them.

One light point controlled by one way switch 6 amp complete.

One fan point/exhaust fan point controlled by one switch.

One 3 pin 5/6 Amps socket point controlled by one switch on same board.

One 3 pin 5/6 Amps socket point controlled by one switch on independent board.

All as per item No. 178 but for 3 pin / 5 pin 16 Amps sockets outlet with 4 Sqmm PVC insulated & unsheathed (FRLS) copper conductor cable independent complete all as specified and as directed .

Supply and Fixing fancy ceiling rose surface bakelite 63mm x 25mm three terminals complete all as specified.

Supply & fix MCB SPN 6-32 Amps, 'C' series, bracking cap10KA, 240V complete all as specified and directed.

Supply & fixing powder coated CRCA steel sheet MCB distrbution board, IP-43 IK-09 protection, double door recess mounted for 240 volts, single pole and neutral 4 way with 200 Amps rated copper bus bar, type complete all as directed. Note: Necessary arrangement for fixing of DB on Trusses structure/shed shall be done surface type as per site requirement with suitable fixing arrangement and rate for the same included in quoted rate of item.

Supply, laying, jointing and testing of XLPE insulated, sheathed, armoured, heavy duty LT 1100 volts grade cable with aluminium conductor laid in trenches / pipes, fixed to poles / walls, fixing with suitable saddle/clamps complete all as directed for size of cable 10Sqmm 2 core.

M&L for sand cushioning to under ground cable in trenches in layers of 8 cm deep before laying the cable and 15 cm deep after laying and stretching the cable complete all as specified and directed by Engr in charge. Note:- Measurement shall be taken after gentling puning of sand.

Supply and Laying Unreinforced precast concrete cable cover class LV type 1, size 250mmx150mmx40mm complete as directed.

M&L for Sub Main Wiring with two runs single core 6 Sqmm PVC insulated unsheathed FRLS cable with stranded copper conductor drawn in suitable size of rigid non-metallic PVC conduit and its all accessories complete concealed in wall/roof with and including 6 Sqmm copper green colour earth wire all as specified and directed by Engineer-in-Charge. Note :- Two run of 6 Sqmm single core cable, one run of 6 Sqmm earth wire & one run of PVC conduit will measured as one unit length.

Supply and Fixing Modular switch 6 Amps single pole one-way, 1 Module complete all as specified.

Supply and Fixing Modular switch 16 Amp single pole one way,1 Module all as specified.

Supply and Fixing Modular fan regulator electronic step type 120watt, 2 Module complete all as specified and directed.

Supply and Fixing Modular socket 2-in-1, 5 pins 6 Amps, combined 2 Module complete all as specified.

Supply and Fixing Modular socket 2-in-1,3 and 5 pins 6 /16 Amps, combined 2 Module complete all as specified.

Supply & fixing indoor decorative ultra slim surface /Wall mounted T5 LED batten tube light complete fitting 1x 20 watt LED Tube fitting with polycarbonate channel housing & integrated electronic driver,energy efficient, 140V-270 volts,co- related colour temperature (CCT) of 6500K, >100 Lm/Watt complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed by Enginee-in-Charge. Make: - Havells, Cat Part No: LUMILINEBS20WLED 865 SPC WH or equivalent to CG/Bajaj/Philips

S&F MCB distribution board, SPN 8 Way, double door, sheet steel, phosphatised, powder painted with Copper bus-bar 200Amp, neutral link, earth bar and din rail , cable ties for cable management, 240 V, complete all as specified.

Supply & fix MCB SP 6-32 Amps, 'B' series, bracking cap10KA, 240V complete all as specified and directed.

Supply and fix DP enclosure with a two pin and earth plug and socket complete with DP MCB of rating 20 Amps, 240 Volts complete with all conction as directed.

Material and labour for Earthing complete with GI earth plate 600mm x 600mm x 6 mm thick electrode buried directly in ground (earth pit not less then 2.25 metres deep below ground level ) with top edge of the plate not less then 1.5 metres below normal ground level connected to GI wire 4.0 mm as earth lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 of MES schedule Part-I and incl 15 mm bore light grade GI protection pipe (upto 7.5 metres beyond outer edge of earth pit) PCC M-10 grade (Nominal Mix) using 40mm graded stone aggregate in pit with 40mm thick RCC cover in reinforced cement concrete M-15 grade (Nominal Mix) using 20mm graded stone aggregate, reinforced with 8mm dia bar both way @ 150mm c/c, watering arrangement with funnel and wire mesh and 20 mm bore light grade GI watering pipe, common salt and charcoal filling, necessary excavation and earth work complete.

M&L for sub main wiring with two runs single core 4 Sqmm PVC insulated unsheathed FRLS cable with stranded copper conductor drawn in suitable size of rigid non-metallic PVC conduit and its all accessories complete concealed in wall/roof with and including 4 Sqmm copper green colour earth wire all as specified and directed by Engineer-in-Charge. Note :- Two run of 4 Sqmm single core cable, one run of 4 Sqmm earth wire & one run of PVC conduit will measured as one unit length. Sub main wiring for Trusses structure/shed shall be done surface type as per site requirement with suitable fixing arrangement and rate for the same included in quoted rate of item.

S&F ceiling fans of size 1200mm sweep, BEE, 5 star rated complete 230 Volt, including hanging arrangement at site all as directed. Make :- Crompton, Cat part No HS Plus 5 star or equivalent make given under list of makes.

Supply and fixing tubes light grade, galvanised with all fitting laid in trenches for protection of earthing lead from mechanical injuror tempering of size 15mm complete all as specified and directed.

M&L for GI earth lead 4mm burried in ground / fixed on walls complete with fixing screws, nut, bolts etc complete all as specified and directed.

S&F in repairs sheet glass assembly consisting of 5.5 mm thick sheet glass shelf tinted glass ordinary quality and glazing with oil putty in square n.exc 0.5sqmm in each pane complete.

Supply, laying, jointing, testing and commissioning cross-linked polyethylene (XLPE) insulated cable for working voltages of 1100 V, PVC sheathed, armoured, 3 core with reduced neutral conductors (3½ core), nominal cross sectional area of main conductor 120 sqmm, stranded aluminium conductor, ISI marked as per IS 7098(Part-I): 1988 including cable glands, lugs etc. to suit the cable size and to be laid in trenches, fixed along pole, under road / floors/ wall with use of suitable fixing clamps and passing through HDPE DWC pipe including taking out the old burnt out cables any size or type by disconnecting complete all as directed by Engr-in-Charge. Make :- Havells/CCI/Gloster / Polycab (Note: (i) LT Cable joint , Lugs, Thimble, Gland, Nut & bolts shall be deemed to be included unit rate quoted) (ii) HDPE DWC Pipe shall be measured & paid separetly under relevent item.

Supply, laying, jointing, testing and commissioning cross-linked polyethylene (XLPE) insulated cable for working voltages of 1100 V, PVC sheathed, armoured, 3½ core with, nominal cross sectional area of main conductor 95 sqmm, stranded aluminium conductor, ISI marked as per IS 7098(Part-I): 1988 including cable glands, lugs etc. to suit the cable size and to be laid in trenches, fixed along pole, under road / floors/ wall with use of suitable fixing clamps and passing through HDPE DWC pipe including taking out the old burnt out cables any size or type by disconnecting complete all as directed by Engr-in-Charge. Make :- Havells/CCI/Gloster / Polycab (Note: (i) LT Cable joint , Lugs, Thimble, Gland, Nut & bolts shall be deemed to be included unit rate quoted) (ii) HDPE DWC Pipe shall be measured & paid separetly under relevent item.

M&L plain Cement Concrete M-15 grade (Nominal mix) using 20mm graded stone aggregate as in filling of road cutting / PCC foundations repairs, filling mass concrete all as specified and directed by Engr - in Charge.

M&L for HDPE Double Wall Corrugated pipe of size 63mm outer dia and 50mm inner dia confirming to IS:14930 Part-II including necessary pipe fittings such as couplers, end caps, bend etc. laid in trenches/ fixed to wall with suitable clamps for cable protection complete all as specified and directed. Make : Gemini/Stiple or equivalent

Supply, install, testing and commissioning of CPRI approved factory made 3 phase, 4 wire, 415 volts, out door cubical type LT Panel box double doors dust, vermin and water proof 250 Amp Rating with inside panel board made out of 3 mm thick CRCA sheet for outer cover and 2mm thick for inside panel board with front and rear operated doors fitted with necessary hinges, making the locking arrangement including cable alley with aluminium bus bars 250 Amps rating both side, internal wiring with copper wire and provn of incomming/outgoing cable way and duly mounted on 45x45x3mm thick angle iron stand and 4 legs 750mm long each 450mm grouted in PCC foundation and complete painting of Panel box with two coats of synthetic enamel paint over a coat of red oxide primer and fixing of 2 Nos LT danger notice plates of standard size complete suitable for acommodating and including following accessories :-

Note : (i) The rate of Old U/s feeder piller box / panel dismantling with all electric cable shall be included in qouted rate of item. (ii) All new incoming /outgoing cable connection (existing / replacement) shall be included in quoted rate (a) MCCB 160 Amp,4P, 25KA fixed thermal and fixed magnetic (I/C) .- 03 Nos (For Main 01 Nos & DG-02 Nos) (b) MCCB, 125A, 25KA, 3 Pole fixed thermal and fixed magnetic (O/G)- 03 Nos) (c) MCCB, 63A, 25 KA, 3 Pole fixed thermal and fixed magnetic (O/G)- 03 Nos (d) MCB, 40-63A DP, 10 KA, single Pole C- series type (O/G)- 06 Nos (e) On-load- Changeover Switch, 4 pole type of 100 Amp rating - 02 Nos (For 02 Dg , 01 Main & 01 Out going Supply) (f) Pre-wired Digital meter with voltmeter, ammeter, slector switch, CTs, Control Fuse and Indicating Lights,- 01 Set (g)Cable Alley double door type I/C 250A - 01 Set

Supply,install,testing and commissioning of CPRI approved factory made 3 phase, 4 wire, 415 volts, out door cubical type LT feeder pillar box double doors dust, vermin and water proof 250 Amp Rating with inside panel board made out of 3 mm thick CRCA sheet for outer cover and 2mm thick for inside panel board with front and rear operated doors fitted with necessary hinges, making the locking arrangement including cable alley with aluminium bus bars 250 Amps rating both side, internal wiring with copper wire and provn of incomming/outgoing cable way and duly mounted on 45x45x3mm thick angle iron stand and 4 legs 750mm long each 450mm grouted in PCC and complete painting of feeder pillar box with two coats of synthetic enamel paint over a coat of red oxide primer and fixing of 2 Nos LT danger notice plates of standard size complete suitable for acommodating and including following accessories :- (a) MCCB, 160A, 25KA, 4Pole fixed thermal and fixed magnetic (Incommer)- 01 Nos (b) MCCB, 63A, 25KA, 3 Pole fixed thermal and fixed magnetic (O/G)- 04 Nos( Outgoing) (c) Cable Alley with Aluminium Bus bar (RYB &N) 250 Amps Rating both side of feeder Piller Box- 01 Set (d) Three Phase LED Indicator switch RY & B & Multi function digital meter

Supply & Fixing of Bus Bar Chamber outdoor type made out of 1.6 mm CRCA sheet 6 way TPN 63 Amps Bus Bar rating including fixing on Wall / Pole with suitable size of clamp, Nut & Bolt or as per site requirement for fixing of outdoor site with provision of angle iron legs 45 x 45 x 3 mm, 750mm long for grouted with PCC and incommer and outgoing cable connections with suitable size of lugs complete all as specified and directed by Engr-in-Charge.

Supply & Fixing 4 Pole 415 Volts MCCB enclousers Box including MCCB 4 Pole 25 to 63 Amps( with fixed thermal and fixed Magnetic seting), rupturing capacity 25 KA with fixed thermal and fixed magnetic seting complete with all incomming and outgoing connection as per site requirment and directed by Engr-in-Charge.

Providing earthing complete with galvanised steel earth plate electrode 60cmX60cmX6.0 mm thick, buried directly in ground (earth pit not less than 2.25mtr deep below normal ground level) with top edge of the plate not than 1.5mtr below normal ground level connected to GI earth strip of size 32 x 6mm by means of bolts, nuts, check nuts and washers of galvanised iron complete earth pit of PCC M-10(Nominal mix) using 20mm graded stone aggregate, 50mm thick earth pit cover of RCC M-15 (Nominal mix) using 20mm graded stone aggregate with TMT reinforcement bar of 8mm dia @ 150mm centre to centre both ways, MS handle 10mm dia made to shape, PGI funnel, wire mesh and 20mm bore GI water pipe medium grade and 40mm bore light grade GI pipe for protection of earth strip and connect to eqpt /LA /panel point with use of Porceline insulator where required, common salt, charcoal dust including provision of earth test Point for earth test complete all as specified and as directed all as shown in electrical plate No. 3 including testing on completion and making good the disturbed surfaces of wall floors etc without claiming extra cost all as directed by Engr-in-Charge. (Note: GI wire beyond 7.5Mtr length from earth electrode shall be measured and paid separately).

M&L Plain Cement Concrete M-10 grade (Nominal mix) using 40mm graded stone aggregate as in post / foundation of E&M installation etc. including provision of necessary form work, finishing even and smooth complete all as specified and as directed by Engr-in-Charge.

M&L for hot / cold rolled mild steel round /square pipes & other mild steel work for structure posts & other connected work and struts , angle, flats etc including cutting tops to shape as directed, drilling holes, notching for wire etc flat iron filltets(for securing wire mesh / sheet etc) including all necessary drilling, bolting or reveting etc and similar work confirming to Fe-290 Gde E-165 including two coats of paint as directed with over a coating of red oxide primer all as directed by Engr-In-Charge.

Supply, installation , testing & commissioning of Microprocessor based three phase four wire digital electronic tamper proof, CT operated, unidirectional energy meter for LT supply with optical communication port, accuracy class 0.5 voltage 3 x 240 V, 1/5 A conforming to IS: 13779 including CT (Ratio 200/5A, class 0.5s), Meter box metal type with Transparent display and inbuilt suitable arrangement for mounting CT complete with all electrical connections from Panel to Meter to make functional & testing complete all as per directed by Engr-in-Charge. Make : Secure (Model No Premier 300) or equivalent

Supply and fixing & testing PVC insulated FRLS , unsheathed cable multi stranded copper conductor of size 4.0 Sqmm single core including with use of PVC flexible pipe as per requirement for wiring of bulk Meter to CT & Panel complete all as directed. Make :- Havells,/Polycab

Supply and spread graded coarse aggregate of 40mm to 63mm nominal size Mixed around outdoor EM installations complete all as specified and directed.

S&F switch flush type 5 amps single pole, one way conforming to IS 3854 and ISI marked

S&F ceiling rose, surface baklite with three terminal

S&F stepped type electronic fan regulator flush type on the existing penolic laminated sheet etc as required. Make :- SSK/Anchor/Havells.

Taking down carefully surface aluminium point wiring with wooden battens/PVC conduit (light, fan, socket, bell or power) including fittings such as switches, ceiling roses, lamp holders, pendants, soclets, regulators etc and making good disturded surfaces complete.

Taking down carefully by Submain wiring/ service connection of any type complete all as directed by Engineer-in-Charge.

Taking down old unserviceable switch board alongwith unserviceable switches & fan regulators and replace with new modular box and modular switch & regulators. Note : (a) Modular box, frame & cover plate, modular switch & regulartors shall be measured & paid separeately under relevent items. (b) Each Switch board alongwith fitting accessories (like Switch, socket regulators etc) shall be measured & paid as each unit

Supply and Fixing SP enclosure with a two pin and earth plug and socket complete with SP MCB of rating 20 Amp, 240 Volts complete with all connection as directed.

Supply and fix storage type water heater(Geyser) of 10 litres capacity, 5 star rating, 2 KW rated power, to operate on single phase, 230 volts, 50 Hz AC supply & complete with all safety controls including provision of suitable bolts, nuts, washers and grouting on walls and making good the disturbed surfaces to match with the existing surfaces and provision of suitbale PVC flexible pipe for hot & cold connection complete installation with testing all as specified and directed by Engineer-in-Charge. Note:- Gyser inle outlet water supply connection, stop valves, mixing tap etc works will be considered in B&R portion.

Supply and fixing modular metal flush box, (including with Modular white cover plate with frame 12 module complete all as directed.

Supply and fixing modular cover plate with frame 12 module complete all as directed.

Taking down the window AC any type capacity carefully from its installed position, dismantling complete with al connections including stabilizer and keeping a side safely and refixing at relocation site with all connection after completion of civil work or as per directed by Engr-in-Charge. Note :- (a) Any damages/broken of any parts of windwon AC during the work, contractor will be responsible for the repair of the same or replaced with new without any extra cost. (b) Necessary arrangement /modification work on wall/existing windown for fixing of windwo AC wiil be considered in B&R portion.

Supply and fix exhaust/ventilating fan 250mm sweep non metalic type Air delivery 860Cum/Hrs, 1200RPM, 35watt, alongwith louvers/grill complete suitable to work on AC, single phase, 230Volts, 50Hz supply and including connecting up with twin core twisted flexible copper conductor cable of suitable size 0.75sqmm. Make:- Havells Model Ventil Air DX and equivalent of Bajaj/Crompton greaves/Orient.

Supply and fix exhaust fan 300mm sweep alongwith louvers complete suitable to work on AC, single phase 230Volts, 21400RPM, 50 Hz supply and including connecting up with twin core twisted flexible copper conductor cable of suitable size 0.75sqmm and including making holes for air ducting of exhuast fan in Circule/square shape or as per site requirement and cutting, chasing for fan complete including making good to disturb surface with cement mortar 1:3 and rubbish off the premises. Make:- Havells Model Ventil Air DB and equivalent of Bajaj/Crompton greaves/Orient.

Supply and fixing Lamp Holder, PVC/polycarbonate type with back plate suitable for batten fittings complete all as specified. Make:- SSK/Anchor/Havells.

Supply and fix LED 15W lamp suitable for normal holder (Base Cap B22) complete all as specified. Make:- Havells or equivalent to Philips/Bajaj/CG

Supply and fixing environmental friendly, ultra modern, energy saving, surface mounted, decorative hexagon bulk head back lid LED luminaire comprising of high brightness LEDs lamp of 10W complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable with suitable size of complete all as specified and as directed. Make:- Havells ordering cat Part No. HEXAFT10WLED 857SSY MBOPC or equivalent in Bajaj/Philips/Wipro/CG.

M/S PREETI CONSTRUCTION