Special repair to roof sheet and flooring of MT and RS and Special repair to dining hall of SNCOs Mess at 19 Wing under GE(AF) Borjhar

Amount

Dismantling, floor hearth or wall tiling including cement mortar bedding (but not backing), removing servicable tiles to store and rubbish off the premises complete all as specified and as directed.

Dismantling AC boarding, any description, fixed in any position with nails complete all as specified and as directed.

M&L for non skid coloured/printed cermaic tiles 7 to 8mm thick (sqaure/rectanular), area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm as in floors over and including screed bedding layer of cement mortar (1:6), set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface complete all as specifed and as directed.

M&L for non skid coloured/printed cermaic tiles 7 to 8mm thick (sqaure/rectanular), area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm as in skirting on vertical surface of walls, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including 10mm thick rendering for backing of tiles/skirting in cement mortar (1:4) complete all as specifed and as directed.

M&L for non skid coloured cermaic tiles 7 to 8mm thick (sqaure/rectanular), area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as in floors, over and including 15mm thick screed bedding layer of cement mortar (1:6), set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface complete all as specifed and as directed.

M&L for glazed ceramic coloured tiles in vertical surface 300x200x7 mm thick, set and jointed in neat cement slurry and pointed in white or colour cement as in vertical surfaces such as skirting, dado, etc. laid over and including 10mm thick badding layer of cement mortar (1:4) complete all as specified and as directed.

Taking down chowkhat or frame (without taking off shutter from the frame) not exceeding 1.5Sqm each, removing from the site including cutting holes required for taking out existing hold fast, etc. complete all as specified and as directed.

All as per Serial item No. 7 here-in-above but exc. 1.50 but not exc 4.00 Sqm each.

S&F solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube and fixing in opening as per specification and drawing in SSR part-I complete all as specified and as directed.

S&F factory made solid panel pace door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, and fixing in the frame at site as per specification & drawing shown in SSR Part-I complete all as specified and as directed.

S&F for powder coating of any colour anodised aluminium window and ventilator shutters, side hung type without sash bar, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. anodised aluminium fitting such as peg stays 150mm long (1 No.) hinges type B-21 100mm long (2 No.) suitable handle (1 No.) complete all as specified and as directed.

S&F stainless steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks of galvanized wire staples complete all as specified and as directed.

S&F aluminium anodised powder coated door shutters/cubicles, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles (2 Nos) in each door, hinges, anodised aluminium snap beading, screws, etc. complete, all as specified and as directed.

S&F powder coated aluminium anodised door/window/ cubiles frame (square/rectangular/channel) type as required for sliding/ fixed door/window/partition with one or more rebates including joining beads, cleats, etc. for fixing, aluminium section weight not less than 0.55kg/Rm complete all as specified and as directed.

M&L for glazing with sheet glass 5.5mm thick, ordinary quality, fixed with rubber gasket or aluminium beads as required, in square exceeding 0.5sqm in each pane complete all as specified and as directed.

M&L for glazing with sheet glass 4mm thick, ordinary quality, fixed with rubber gasket or aluminium beads as required, in square exceeding 0.5sqm in each pane complete all as specified and as directed.

S&F 12mm thick particle board, interior grade, prelaminated both sides with decortive choice lamination as in aluminium doors complete all as specified and as directed.

S&F aluminium handle, cast type, anodized of size 125mm complete all as specified and as directed.

S&F stainless steel butt hinges, medium weight, cold rolled of size 75mm complete all as specified and as directed

S&F mortice lock, verticle type of size 100mm 04 lever complete all as specified and as directed

S&F aluminium (extruded section) door closer hydraulically regulated, designation No 3, universal type, suitable for door shutter of 851 to 1000mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed.

S&F as repairs 200mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and as directed.

S&F 150mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and as directed.

S&F as in repairs vitreous china squatting pan, 'Orrisa' pattern of size 580mmx440mm white, with integral foot rest (excluding flushing cistern and flush pipe) including provision of cement concrete bedding, connection to trap and to flushing pipe, anti-syphonage pipe, etc. and making good to disturbed surafces of floor complete all as specified and as directed.

S&F as in repairs viterous china wash down water closet pan, 'Pedestal Pattern' white with seat white closet pattern with flat battom and cover mild steel chromium plated or aluminium anodised hanging device and joints, etc. and connection to drain, flushing pipe, anti symphonage pipe and fixing arrangements with fixing bolts, etc. including making good to the disturbed portion of floor in cement concerete (1:2:4) type B-0 (using 12.5mm graded stone aggregate) complete all as specified and as directed.

S&F hand shower (health faucet) with 8mm dia, 1 meter long flexible tube and wall hook with NRV (back flow preventor) complete all as specified and as directed. Make : Jaquar, Cat No. ALD CHR-58/3 or equivalent model from make Marc/Cera/ Parryware/ Hindware/Jainko/ Essco

S&F as in repairs for PVC low level flushing cistern of size 10 Litres capcity, valveless duel symphonic action type, flushing cistern, white, with inlet ball valve flat and handle including PVC flush pipe 32mm bore and mild steel brackets made out of 25 by 25 by 3mm thick angle iron of required length fixed to wall with PCC (1:2:4) type B-0 (using 12.5mm graded stone aggregate) complete all as specified and as directed.

S&F as in repairs viterous China Wash Hand Basin, white, flate back of size 550 x 400mm including 15mm dia pillar tap, cast copper alloy, with capstan head chromium plated, screwed down high pressure with or without letter 'Hot' or 'Cold' with long screwed shank and fly nut including 32mm bore PVC water pipe and PVC connection suitable for 15mm bore pipe, 60cm long with nut and washers at both ends and chromium plated waste coupling, chain and plug and porcelain stopper including mild steel brackets, made out of angle iron of size 25 x 25 x 3mm thick as required length, fixed to wall with PCC (1:2:4) type B-0 (using 12.5mm graded stone aggregate) including cutting for a pinning of brackets complete all as specified and as directed.

S&F for viterous china Urinal full stall type, white including providing and fixing plugs, beddinjg urinal against wall in cement mortar (1:2) securing to plugs with and including 60mm long brass screws, pointing around urinal back in cemnet, with and including PTMT grating and union for discharge pipe including waste pipe of polythelene of low or high density or PVC 32mm dia complete all as specified and as directed.

S&F for PVC waste coupling 32mm dia PTMT (half or full threaded) suitable for WHB/Sink (min wt 450 gms) completed all as specified and as directed.

S&F as in repairs 15mm bore stop valve, cast copper alloy, fancy type, chromium plated, screwed down, high pressure with capstan heads, screwed both ends for iron pipe or for union complete all as specified and as directed.

S&F as in repairs 15mm bore bib taps, cost copper alloy, chromium plated, fancy type with capstan head, screwed for iron pipe or for brass ferrule complete all as specified and as directed.

S&F as in repairs 15mm bore fancy type piller tap, cost copper alloy, chromium plated, fancy type with capstan head, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts screwed for iron pipes complete all as specified and as directed

Taking up or down steel water tubing and connections of size 15mm bore, fixed in wall, ceiling, floors, trenches, etc. completed all as specified and as directed.

M&L for galvanized steel water tubing, medium grade of size 15mm bore with and including all fittings and fixed to walls, ceilings or laid in floors, etc. complete all as specified and as directed.

S&F sheet glass, shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed.

S&F tubular towel rail 600mm long of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Minium weight 190gm) complete all as specified and as directed.

S&F PVC connection pipe of size 15mm dia with PTMT nuts of 450 length complete all as specified and as directed.

S&F soap dish, viterous china white approximate size 160 x 160 x 90mm complete all as specified and as directed.

S&F toilet paper holder, viperous china box type complete all as specified and as directed.

Demolition of brickwork or stone/boulder masonary, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc. but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.

M&L for brick work with sub class 'B' bricks using old size bricks, straight or curved on plan exc 6m mean radious, built in cement mortar(1:6) complete all as specified and directed.

Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces, etc. including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and as directed.

M&L for rendering 10mm thick in cement mortar (1:6) on fair face of brick work of walls, finished even and smooth without using extra cement complete all as specified and as directed.

M&L for preparation of new plastered wall surfaces and applying two coats of oil emulsion distemper (OBD) of approved shade/tint over and including one coat of thin layer wall putty complete all as specified and as directed.

M&L for complete removal of existing treatment of old plastered wall surfaces and applying two coats of oil emulsion distemper (OBD) of approved shade/tint,over a coat of thin layer of wall putty complete all as specified and as directed.

M&L for preparation of old plastered surfaces of wall and applying two coats of cement base paint of approved shade/tint over and including one coat of chalk whiting complete all as specified and as directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness including nainital or similar pattern in roof covering including ridges complete all as specified and as directed.

Dismatling timer scantling over 40cm in section in any position complete all as specified and as directed

M&L for 2nd class hardwood timber scantling, clean sawn and fixed in framed work complete all as specified and as directed.

M&L for preparing wood & wood based material of any description, not otherwise decribed over 10cm width or girth and applying one coat of creosote oil on new or old wooden surfaces complete all as specified and directed.

S&F for pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of any colour having tensile strength of 550 Mpa as in roof covering including ridge/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and as directed.

M&L for provision of gysum board of 9mm thick ceiling tiles of size 595mm x 595mm including aluminium anodised section, angle of size 30mm x 25mm x 2mm thick, main / cross tee-section 15mm x 15mm x 1.4mm and suspended with 2.18mm thick GI wire of suitable length and including fixed and aluminium snap grid all as per Clause 10.38.1 of SSR Part-I and as per manufacturer’s instructions complete all as specified and as directed.

S&F anodised aluminium grill, made of 6mm dia aluminium bar size of mesh 50mm x 50mm, fixed together with aluminium frame for aluminium doors, windows, etc. complete all as specified and as directed.

M&L for virified ceramic coloured tiles 10mm thick (square/ rectangular), polished, area of each tiles not exceeding 0.36 sqm, in floors etc, over and including 15mm thick screed bedding layer of cement mortar (1:6), set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces complete all as specifed and as directed.

M&L for vitrified ceramic coloured tiles 10mm thick (square/rectangular) polished, area of each tile not exc 0.36 sqm, fixed as in skirting on vertical surface of walls, etc., over and including 10mm thick rendering for backing in cement mortar (1:4), set and jointed in neat cement slurry and pointed in white or coloured cement to match in light shade complete all as specified and as directed.

M&L for preparation of old plastered wall surfaces and applying two coats of oil emulsion distemper (OBD) of approved shade/tint, complete all as specified and as directed.

M&L as in repairs factory made 60mm thick machine pressed precast concrete coloured interlocking paver blocks of grade M-35 confirming to IS 15658-2006 of shape and size as directed with grey cement and pigment laid over and including 50mm thick sand cushioning, joints of blocks filled with dry sand and compacted with mechanical vibrator, complete all as specified and as directed.

Extra forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement including forms, moulds, mitred/stopped ends etc. complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floor and pavings not exc. 15cm thickness (below or above ground level) complete all as specified and as directed.

M&L for 75mm thick PCC (1:3:6) type C-2 (using 40mm graded crushed stone aggregates) as in plinth protection, sub base, etc., finished surface even and smooth without using extra cement complete all as specified and as directed.

M&L for prepolished chequered cement concrete tiles with grey cement and pigment of size 30cm x 30cm x 22 to 25 mm thick, set and jointed with cement slurry over and including 15mm thick screed bed or bedding in cement mortar (1:6) and pointed with grey cement to match complete all as specified and as directed.

Taking down carefully aluminum/copper point wiring (light, fan socket or power) complete including all fittings & fixtures such as switches, ceiling roses, pendants, regulators, sockets, light fittings, etc. and making good disturbed surfaces of walls, floors, ceiling, etc. complete all as required and keeping serviceable light fittings in safe custody for reuse complete all as specified and as directed.

Taking down existing sub main wiring of any type/size from walls and making good to disturbed surfaces complete all as specified and as directed.

Taking down of old existing main switches/DBs /AC box, etc. of any type/size complete all as specified and as directed.

M&L for point wiring with 1.5 Sq.mm PVC FRLS insulated, unsheathed, copper conductor, stranded, 1100 volt grade cable including PVC Casing & Caping of size not less than 25 x 12mm / 32 x 12mm, suitable as per site requirement, ISI marked with all accessories, such as tee, bend, joint covers, etc. round/square blocks at junctions, etc, screws, gutti / PVC roul plugs all as per site requirements including plastic terminal boxes for mounting of switches/sockets/regulator, etc. and PVC FRLS insulated and unsheathed 1100 volt grade copper conductor, stranded 1.5 sq.mm cable as continuous earth lead, connected to common earth dolly for the followings complete all as specified and as directed. Note : Colour coding of cables shall be followed, such as:- (i) Phase - Red, (ii) Neutral – Black, and (iii) Earth – Green.

One light point/fan Point controlled by one way switch.

One 5 Amp independent socket controlled by one switch.

One 5 Amp socket controlled by one way switch on same board.

All as per Serial item No. 68 here-in-before but for power point wiring with 2.5 Sq.mm FRLS PVC insulated, unsheathed, copper conductor, stranded 1100 volt grade cable and 2.5 Sqmm FRLS PVC insulated, unsheathed, copper conductor, stranded 1100 volt grade cable for earth continuity.

M&L for sub main wiring with 2 x 10 Sq.mm PVC insulated single core unsheathed stranded copper conductor drawn in and including PVC casing and capping including continuous running earth wire by 10 Sq.mm PVC unsheathed single core stranded copper conductor connected to common earth dolly including plastic terminal boxes completed all as specified and as directed.

M&L for sub main wiring with 2 x 6 Sq.mm PVC insulated single core unsheathed stranded copper conductor drawn in and including PVC casing and capping including continuous running earth wire by 6 Sq.mm PVC unsheathed single core stranded copper conductor connected to common earth dolly including plastic terminal boxes complete all as specified and as directed.

S&F switch piano flush type, 5 Amp, single pole, one way complete all as specified and as directed.

S&F socket outlet 2 in 1, 3 pin, 5 Amp, flush type complete all as specified and as directed.

S&F switch socket combination, 2 in 1, 5 pin, 5 Amp, flush type complete all as specified and as directed.

S&F switch socket combination 5 in 1, 6 pin, 5/16 Amp, flush type universal, 240 volts complete all as specified and as directed.

S&F as in repairs ceiling rose, surface bakelite 65 x 50mm, three terminal complete all as specified and as directed.

S&F lamp holder, PVC/Polycarbonate type with back plate suitable for batten/pendant fitting complete all as specified and as directed.

S&F as in repairs LED lamps, 20 watt capacity suitable for 240 volt complete all as specified and as directed. Make : Phillips, Cat No. 20 W Round B22 LED (White) and or equivalent model from make Havells/Surya Roshni Ltd/Bajaj/Crompton

S&F modular type single pole and neutral enclouser with a two pin and earth plug socket complete with one MCB SP complete all as specified and as directed.

Taking down carefully of old existing serviceable distribution board of any size and make with cable connections and refixing the same after completed the work for reconnection of electrical connection complete all as specified and as directed.

S&F MCB DB double door, SPN, 8 ways, 240 volts complete all as specified and as directed.

S&F MCB SPN, 63 Amp, 230 volts complete all as specified and as directed.

S&F MCB SP, 6 to 32 Amps, 230 volt complete all as specified and as directed.

S&F LED light fittings 1x22/1x20 watt, 220 volts, AC decorative box type with driver holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed. Make : Phillips/Crompton/Havells/Bajaj/Surya Roshni Ltd

S&F recess mounted LED panel light fitting of 36 watt (2x2), suitable for 240 volt, made from extruded aluminium frame and super bright LEDs including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed. Make : Phillips/Crompton/ Havells/Bajaj/Surya Roshni Ltd

Taking down carefully ceiling fan of any size/make from existing position, sealing cable end, dismantling the blades and refixing the blades after cleaning including re-fixing the ceiling fan at existing position complete all as specified and as directed.

M&L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6mm burried directly in ground (earth pit not less than 2.25m deep below ground level) with top edged of the plate not less than 1.5m below normal ground level, connected to galavanised iron earth lead by means of bolt, nut, check nut and washer of galavanised iron steel wire 4mm dia as earthing lead as shown in Electrical Plate No 4 of SSR Part-I connected to earthing test point all as specified or indicated including testing on completion including necessary excavation and earth work in soft/loose soil, earth pit in PCC (1:3:6) type C-1 (using 20mm stone stone aggreate), funnel, 20mm dia GI medium grade water pipe, 15mm dia GI light grade earth lead protection pipe, CI frame and cover, wire, copper lugs, wire mesh, charcoal or coke and common salt in alterative layer all around the earth electrode compacted thickness 15cm including excavation and earth work pit cover including disposal of surplus soil to a distance not excessding 50m complete testing on completion all complete all as specified and as directed.

M/s Nice Traders

KUNDAN ENGINEERS AND BUILDERS

M/S B.H. ENTERPRISE

M/s Vishnu Enterprises

M/S PANKAJ SUPPLY SYNDICATE

M/s L A Enterprise

M/s Kajal Das

M/S Trio Engineers And Builders