REPAIR PAINTING POLISHING TO WOODEN AND STEEL FURNITURE IN INSPECTION ORGANIZATION CQA AREA UNDER GE MH AND RH KIRKEE

Amount

TABLE DINING 6/8 PERSONS: DRG NO: FD-273, 30(M)

Taking down carefully unserviceable top and S&F new top for table dining 8 Persons of size 1800 x 900 x 18/19mm made of prelaminated MDF Board both side laminated exterior grade type two grade one ISI Marked (Make : Greenply/Action Tesa/Century Ply/Archid Ply with teak wood beading all round 4 mm thick all as shown on drg.

All as per item No 1.01 above but for table dining 6 persons of size 1500 x 900 x 18/19 mm complete.

Taking down carefully unserviceable legs and S&F new legs of size 75 x 40 x 742 mm made out of 1st Class teak wood all as specified and shown on drg.

Taking down carefully unserviceable long rails and S&F new long rail of size 25 x 100 x 1800 mm made out of 1st Class teak wood complete all as shown on drg.

Taking down carefully unserviceable long rails and S&F new long rail of size 25 x 100 x 1500 mm made out of 1st Class teak wood complete all as shown on drg.

Taking down carefully unserviceable short rails and S&F new short rail of size 25 x 100 x 900 mm made out of 1st Class teak wood complete all as shown on drg.

Taking down carefully unserviceable stiffener and S&F new stiffener made out of 1st Class teak wood 25 mm thick and 100 mm wide complete all as shown on drg.

Taking down carefully unserviceable corner and S&F new corner made out of 1st Class teak wood complete all as shown on drg.

Taking down carefully unserviceable shoe and S&F new PVC / hard rubber shoe with suitable SS screw complete all as directed by Engr in Charge.

CHAIR DINING: DRG NO: FD-279, 228

Normal repair and tightning of loose components and S&F new corner made out of 1st Class teak wood complete all as shown on drg.

Taking down carefully unserviceable rail and S&F rail made of 1st Class teak wood with suitable holes for caning as per drg.

Taking down carefully unserviceable front legs and S&F front leg made of 1st Class teak wood as per drg.

Taking down carefully unserviceable rear legs and S&F rear leg made of 1st Class teak wood as per drg.

Taking down carefully unserviceable stiffeners and S&F stiffeners made of 1st Class teak wood as per drg.

Taking down carefully unserviceable back rest and S&F back rest made of 1st Class teak wood as per drg.

Taking down carefully unserviceable shoe and S&F new PVC/hard rubber shoe with suitable SS screw complete all as directed by Engr in Charge.

CHAIR WRITING: DRG NO: FD-250, 280

Normal repair and tightning of loose components and S&F new corner made out of 1st Class teak wood complete all as shown on drg.

Taking down carefully unserviceable rail and S&F rail made of 1st Class teak wood with suitable holes for caning as per drg.

Taking down carefully unserviceable front legs and S&F front leg made of 1st Class teak wood as per drg.

Taking down carefully unserviceable rear legs and S&F rear legs made of 1st Class teak wood as per drg.

Taking down carefully unserviceable stiffeners and S&F stiffeners made of 1st Class teak wood s per drg.

Taking down carefully unserviceable arm rest and S&F arm rest made of 1st Class teak wood as per drg.

Taking down carefully unserviceable back rest and S&F back rest made of1st Class teak wood as per drg.

Taking down carefully unserviceable shoe and S&F new PVC/hard rubber shoe with suitable SS screw complete all as directed by Engr in Charge.

CHAIR EASY: DRG NO: FD-229

Normal repair and tightning of loose components and S&F new corner made out of 1st Class teak wood complete all as shown on drg.

Taking down carefully unserviceable rail/bead and S&F rail / bead for caning made of 1st Class teak wood with suitable holes for caning as per drg.

Taking down carefully unserviceable front legs and S&F front legs made of 1st Class teak wood as per drg.

Taking down carefully unserviceable rear legs and S&F new legs made of 1st Class teak wood as per drg.

Taking down carefully unserviceable arm rest and S&F new arm rest of size 65x25mmx 610mm as per drg.

Taking down carefully unserviceable shoe and S&F new PVC/hard rubber shoe with suitable SS screw complete all as directed by Engr in Charge.

BED PLYTOP: DRG NO: FD-246

Normal repair and tightning of loose components and S&F new corner made out of 1st Class teak wood complete all as shown on drg.

Taking down carefully unserviceable long rails of bed plywood top and S& F of new long rails made of 1st Class teak wood all as spefied and shown on drawing.

Taking down carefully unserviceable ply wood teak face and S&F 4mm thick one side teak face ply wood ISI Marked BWR of size 780 x 340 mm on both side of head board rest all as per drg.

All as per item No 5.03 above but size 780 x180 mm for foot boards.

Taking down carefully unserviceable plywood top and S&F new plywood 12 mm thick BWR confirming to IS: 303 (Make : Greenply/Century Ply/Archid Ply) as shown on drg.

Taking down carefully unserviceable bottom rails of bed ply wood top and S&F new bottom rails of 1st Class teak wood of required shape and size all as specified and shown on drawing.

Taking down carefully unserviceable legs of head board and S&F of new legs of head board made of 1st Class teak wood of required shape and size all as specified and shown on drawing.

Taking down carefully unserviceable legs of foot board and S&F of new legs of foot board made of 1st Class teak wood of required shape and size all as specified and shown on drawing.

Taking down carefully unserviceable cane from different types of chairs and M&L for recaning the same with new 2mm wide oval type plastic cane and bordering with 3mm wide plastic cane complete all as shown & as directed

SOFA SET 5 SEATER / 4 SEATER: DRG NO: FD-281

Replacement of existing tapestry and cushions of sofa set by replacing old u/s cushion with 40 density U-foam cushion of Make : Kurlon (size as per drg) including providing long cloth lining for cushion, covered with new tapestry cloth of first quality (as per sample available at BSO yard) of approved shade duly stiched in shape and provided with good quality nylon zip on one side for sofa set 5 seater for Set of 10 cushions. (FD-281/ FD-373/ FD-258)

Taking out old unservicable front or rear legs and S&F new legs made out of 1st Class teak wood all as shown on drg.

Taking out old unservicable broken battens of seat and back and S&F new battens made out of 1st Class teak wood all as shown in drg.

Taking out old unserviceable arms and S&F new arms made out of 1st Class teak wood all as shown on drawing.

Taking out old unservicable side rails and S&F new rails made out of 1st Class teak wood all as shown on drg.

Taking out old unservicable long rail (front of rear) of sofa 3 seater and S&F new long rail made out of 1st Class teak wood all as shown on drg.

REPAIR TO TABLE DRESSING LADIES: DRG NO: FD-251 / FD- 32

Taking down carefully unserviceable parts of TABLE DRESSING LADIES (FD-251/ FD-32) and supply and fixing new parts as per existing shape and size and as per drg and as directed by Engr-in-Charge and S & F of new Box w/o Drawer of pre-laminated particle board of 18/19mm thick prelaminated particle board exterior grade approved by GE, exposed edges shall be 4mm thick wooden edge finish duly polished, all as per existing and fixed complete.

Taking down carefully unserviceable sliding glass shutter and S&F glass shutter 5.0 thick, 550mm x 380mm with aluminum channel of table dressing ladies after taking out carefully old existing broken sliding glass with channel, complete as as specified and directed.

Taking down carefully unserviceable mirror and S&F mirror 366mm x 1220 x 5.0mm thick of table dressing ladies, complete all as specifed and directed.

Taking down carefully unserviceable back frame and S&F back frame made out of 6mm thick commercial ply wood and 45mm x 40mm 1st Class teak wood frame, as per existing, complete as as specified and directed.

Taking down carefully unserviceable knob and S&F chromium plated knob 25mm dia 24mm length of best quality as approved.

Taking down carefully unserviceable drawer and S&F drawer of table dressing ladies as per existing/drawing complete all as specified and directed.

Taking down carefully unserviceable legs and S&F legs with frame 1st class teak wood, as per existing/drawing, complete all as specified and directed..

REPAIRS TO TABLE DRESSING GENTS: DRG NO: FD-230/31

Taking down carefully unserviceable parts of TABLE DRESSING GENTS :(FD-230/31) and supply and fixing new parts as per existing shape and size and as per drg and as directed by Engr-in-Charge and S & F of new Box (size 900 x 300 x 150 mm) w/o drawer of pre-laminated particle board of 18/19mm thick prelaminated particle board exterior grade approved by GE, exposed edges shall be 4mm thick wooden edge finish duly polished, all as per existing and fixed complete.

Taking down carefully unserviceable mirror and S&F mirror of size 380mm x 760mm x 5.0mm thick all as shown on drg, and directed by the Engineer-in-Charge.

Taking down carefully unserviceable back frame and S&F back frame made out of 35mm x 25mm 1st Class teak wood & 6mm thick commercial ply grade MR, type BB, all as shown on drg, and directed by the Engineer-in-Charge.

Taking down carefully unserviceable knob and S&F chromium plated knob 25mm dia, as approved by the Engineer-in-Charge of best quality.

Taking down carefully unserviceable drawer and S&F drawer of table dressing gents as per existing/drawing complete all as specified and directed.

- Ditto - as per Sr No. 8.01 but Fixing /Fitting of loose /dismantaled / sagged table dressing gents to the wall with "L" Bracket (Pair) as per drg and all accessories such as screw,clips, plugs, clamps, etc complete all as directed by Engineer-in-Charge.

PEG TABLE: DRG NO: FD-277

Taking down carefully unserviceable parts of PEG TABLE (FD-277) and supply and fixing new parts as per existing shape and size and as per drg and as directed by Engr-in-Charge and S&F new top of 18/19 mm thick Prelaminated MDF Board Two side laminated exterior grade type-II grade-I Make : Green ply/Action TESA/Century Ply/Archid ply including 4 mm thick Teak wood beading all round of same size and shape

Taking down old unserviceable legs and S&F new legs made of 1st Class teak wood as per drg.

Taking down old unserviceable long rail and S&F new long rail made of 1st Class teak wood as per drg.

Taking down old unserviceable short rail and S&F new short rail made of 1st Class teak wood as per drg.

Taking down old unserviceable Stiffener and S&F new Stiffener made of 1st Class teak wood as per drg.

TABLE CENTRE: DRG NO: FD-274, FD-235

Taking down carefully unserviceable parts of TABLE CENTRE (FD-274,) and supply and fixing new parts as per existing shape and size and as per drg and as directed by Engr-in-Charge and S&F new top 18/19 mm thick of Prelaminated MDF Board Two side laminated exterior grade type-II grade-I Make : Green ply/Action TESA/Century Ply/Archid ply including 4 mm thick Teak wood beading all round of same size and shape

Taking down old unserviceable legs and S&F new legs made of 1st Class teak wood as per drg.

Taking down old unserviceable short rail and S&F new short rail made of 1st Class teak wood as per drg.

Taking down old unserviceable long rail and S&F new long rail made of 1st Class teak wood as per drg.

TEAPOY WOODEN: DRG NO: FD-278

Taking down carefully unserviceable parts of TEAPOY WOODEN (FD-278) and supply and fixing new parts as per existing shape and size and as per drg and as directed by Engr-in-Charge and S&F new top 18/19 mm thick of Prelaminated MDF Board Two side laminated exterior grade type-II grade-I Make : Green ply/Action TESA/Century Ply/Archid ply including 4 mm thick Teak wood beading all round of same size and shape

Taking down old unserviceable legs and S&F new legs made of 1st Class teak wood as per drg.

Taking down old unserviceable short rail and S&F new short rail made of 1st Class teak wood as per drg.

Taking down old unserviceable long rail with new long rail made of 1st Class teak wood as per drg.

TABLE BED SIDE: DRG NO: FD-276

Taking down old unservicable top of table bed side and S&F new top of Prelaminated Particle board exterior grade 18/19 mm thick of same size and shape as shown in drg.

Taking down old unservicable sides of table bed side and S&F new sides of Prelaminated Particle board exterior grade 18/19 mm thick of same size and shape as shown in drg.

Taking down old unservicable shelf of table bed side and S&F new shelf of Prelaminated Particle board exterior grade 12 mm thick of same size and shape as shown in drg.

Taking down old unservicable ply from the back and S&F new commercial ply wood 6 mm thick conforming to IS: 303 BWR grade all as specified and shown in drg.

TABLE WRITING: DRG NO: FD-35/249/275

Taking down carefully unserviceable parts of TABLE WRITING (FD-33/249 /275) and supply and fixing new parts as per existing shape and size and as per drg and as directed by Engr-in-Charge and S&F new top S&F new top of size 1145 x 600 x 18/19 mm made of 18/19 mm thick of Prelaminated MDF Board Two side laminated exterior grade type-II grade-I Make : Green ply/Action TESA/Century Ply/Archid and teak wood beading all round 4 mm thick shall be provided all as specified and shown on drg.

Taking down old unservicable legs and S&F new legs made of 1st Class teak wood as per drg.

Taking down old unservicable ply wood and S&F ply wood 6mm including chromium plated knobs etc in bottom of drawer complete all as specification and directed.

Taking down old unservicable stiffeners and S&F 1st Class teak wood stiffeners as per drg.

Taking down old unservicable drawers side and S&F new drawers of size 600 x 500 x 18 mm pre laminated Particle board exterior grade ISI marked all as per drg complete.

Taking down old unservicable lock of drawers and S&F new lock 6 lever 50 mm all as per drg complete.

Taking down old unservicable shoe and S&F new PVC/hard rubber shoe with suitable SS screw complete all as directed by Engr in Charge.

Taking down old unservicable Long rail and S&F new long rail made of 1st Class teak wood as per drg.

Taking down old unservicable Short rail and S&F new short rail made of 1st Class teak wood as per drg.

Taking down old unservicable rear side ply wood and S&F new 6mm thick ply wood as per drg.

Taking down old unservicable shutter and S&F new shutter made of 18mm prelaminated Particle board exterior grade with 4mm thick beading hung with SS piano type hinges including one knob complete as per drg.

SIDE BOARD: DRG NO: FD-241

Taking down old unserviceable top and S&F new top made of prelaminated Particle board exterior grade 18/19 mm thick of same size and shape as shown on drg.

Taking down old unserviceable sides and S&F new sides made of prelaminated Particle board exterior grade 18/19 mm thick of same size and shape as shown on drg.

Taking down old unserviceable back ply wood 1200x635x6 mm and S&F new back ply with commercial ply wood 6 mm thick confirming to IS: 303 BWR grade.

Taking down old knobs and S&F chromium plated knobs complete all as specified and shown on drg.

Taking down old unserviceable shutters and S&F shutters 375 x 475 x 18/19 mm of the cup board made of prelaminated Particle board exterior grade 18/19 mm thick as per drg.

Taking down old unserviceable bottom and S&F new bottom made of prelaminated Particle board exterior grade 18/19 mm thick of same size and shape as shown on drg

Taking down old unserviceable Shelf and S&F new Shelf made of prelaminated Particle board exterior grade 18/19 mm thick of same size and shape as shown on drg

Taking down old unserviceable bottom frame and legs and S&F new bottom frame and legs made of 2nd Class hard wood as per drg.

BOOK CASE: DRG NO: FD-45(M) / FD-237

Taking down old unservicable back ply from book case and S&F new back ply as per shape and size shown in drawing of 6 mm thick commercial ply including french polishing to match the other parts complete all as specified and directed.

Taking down old unservicable bottom frame and legs and S&F new bottom frame and legs made of 2nd Class hard wood as per drg.

Taking down old unservicable doors from the book case and S&F new doors of 2nd class hard wood as per shape and size shown in drawing including french polishing to match the other parts with piano type hinges complete all as specified

Preparing old existing surfaces of wooden furniture of any description by sand paper, removing the stains and filling holes, cracks by putting bees wax and chalk powder etc, and applying two coats french polish to the exposed surface shade as approved by GE. Polishing shall be uniform and shall be glossy finish for the following articles:-

Bed ply top DRG NO: FD-246

Book case small DRG NO: FD-237/45(M)

Chair Dining DRG NO: FD-16/279/228

Chair easy DRG NO: FD-229

Chair Writing DRG NO: FD-280/250

Side board DRG NO: FD-241

Table centre DRG NO: FD-274/235

Table dining 6/8 pers DRG NO: FD-30(M) / 239/273

Table bed side DRG NO: FD-276/248

Teapoy DRG NO: FD-278/232

Table 3'x2' without drawer/withdrawer DRG NO: FD-284/283

Peg table DRG NO: FD-277/236

Stool Dressing DRG NO: FD-252 / 282

Table Dressing Gents DRG NO: FD-31(M) / 230

Table office clk (w) DRG NO: DB-4120

Table office officer (w) DRG NO: DB-4119

Hat stand DRG NO: FD-233 / 206

Table dressing ladies DRG NO: FD-251 / 32

Table writing DRG NO: FD-275/ 249

Sofa Chair DRG NO: FD-258 / 281

Sofa set 3 seater DRG NO: FD-258 / 281

Bin soiled linen DRG NO: FD-244 / 212

REPAIRS TO CHAIR VERANDAH: FD-359 Note for item Nos 5.01 & 5.02 :- (i) Old damaged canning shall be removed before painting. (ii) Colours of cane and paint shall be as approved by GE.

Taking down old existing unserviceable cane from chair verandah and Material and Labour for preparation of existing painted surfaces of steel frame of chair verandah by hand scrapping, cleaning of the surfaces and applying Two coat of synthetic enamel paint complete all as directed.

After Painting of chair verandah as directed by Engr -in -charge. and M&L for reweaving the same with new 4mm wide plastic cane oval type best quality, in seat and back, including provision of rubber shoes to the legs, complete all as shown on drawing and as directed by Engr-In-Charge.

Material and Labour for welding before painting as required broken portion of Chair. In repairs exc 2.5 but not exc 5cm length and thickness of metal to be welded not exc 6mm

ALMIRAH LARGE STEEL WITH SHELVES: DRG NO: FD-67 / 1031

Taking down old unserviceable handle and S & F CP handle 125 mm with nut and bolts as per drg.

Taking down old unserviceable locks and S&F locks of 6 lever as per drg.

Taking down old unserviceable locking device and S&F new device including MS Rod rest all as per drg.

Taking down old unserviceable hinges S&F new hinges of reqd size as per drg.

Taking down old unserviceable legs S&F new legs made out of 1 mm MS sheet as per drg.

Taking down old unserviceable shelves and S&F new shelve made out of 1mm MS sheet as per drawing.

Taking down old unserviceable shutters and S&F new shutters made out of 1mm MS sheet as per drawing.

Adjustment of exsisting shelves by providing new clamps after removing unserviceable clamps all as directed by Engr in charge

ALMIRAH MEDIUM/SMALL STEEL WITH SHELVES: DRG NO: FD-243/1032

Taking down old unserviceable handle and S & F CP handle 125 mm with nut and bolts as per drg.

Taking down old unserviceable locks and S&F locks 6 lever as per drg.

Taking down old unserviceable locking device and S&F new device including MS Rod rest all as per drg.

Adjustment of the existing shelves by providing new clamps after removing unserviceable clamps all as directed.

Taking down old unserviceable hinges S&F new hinges of reqd size as per drg.

Taking down old unserviceable legs S&F new legs made out of 1 mm MS sheet as per drg.

Taking down old unserviceable shelves and S&F new shelve made out of 1mm MS sheet as per drawing.

Taking down old unserviceable shutters and S&F new shutters made out of 1mm MS sheet as per drawing.

TABLE OFFICE CLERK STEEL: DRG NO: FD-84 / 1004

Taking down old unserviceable top and S & F new top made out of 18/19 mm Prelaminated MDF Board two side laminated exterior grade type two grade one ISI marked Make : Green ply/Action TESA/Century Ply/Archid ply with teak wood beading all round 4 mm thick all as shown on drg.

Taking down old unserviceable leg and S&F new leg made out of MS conduit pipe 25 mm dia of 1.6 mm thick as per drawing.

Adjustment of drawers wherever required as directed by Engr in Charge

Taking down old unserviceable locks of drawer and S&F locks of any type 5 lever as per drg.

Taking down old unserviceable shoe and S & F new hard rubber shoes as per drawing

TEAPOY VERANDAH: DRG NO: FD-208/255

Taking down old unserviceable legs and S&F new legs of existing shape and size as required duly welded to all the places as per drawing.

Taking down old unserviceable top and providing new top made of Prelaminated MDF Board two side laminated exterior grade type two grade one ISI marked Make : Green ply/Action TESA/Century Ply/Archid ply with teak wood beading all round 4 mm thick all as shown on drg.

Preparing old painted steel surfaces (internal & external) by sand paper, cleaning, including denting patches by filling putty (metal paste) and painting one coat to uniform finish with synthetic enamel paint , shade as directed by GE/Engr-in-charge for the following articles:-

Almirah large steel Drg No. FD-67 / 1031

Almirah med steel Drg No. FD-1032/243

Table office officer steel Drg No. FD-84/1002/1003

Table office clerk steel Drg No. FD-84/1004

Teapoy verandah Drg No. FD-255/208

Bed Hard Steel FD/MAP-II/08(R)

Charpoy with Hard Top FD/MAP-II/01

Table 900x900x760 steel Drg No. FD-1009

CHAIR CBA STEEL WITH ARMS FD-75

M&L for removing existing old unserviceable Seat and Back of Chair Steel Tubular with Arm (FD-75) and Welding MS FIat 11" x 2" and 4mm thick for seat (02 Nos) and Welding MS FIat 8" x 2" and 4mm thick for Back (02 Nos) on GI Tube frame work as per direction of Engr-in-charge. (a) Steel GI Tubing parts (frame Work) of chairs duly scrapping for removal of rust, dirt and Two coat of SE paint of Black colour or shades approved by Engr-in-Charge (b) S&F Plywood 12mm thick commercial size 18½" x 18¼" fixed on welded MS Flat (cleats) with the help of suitable Nut & Bolt with washer for a seat and paste 50mm U Foam on plywood for cushioning of Seat coverd with tepestry cloth with the help of suitable stappler pin for upholstery work . (as per sample kept in BSO Yard) (c) S&F Plywood 12mm thick commercial size 18¼" x 16" fixed on welded MS Flat (cleats) with the help of suitable Nut & Bolt with washer for a Back and paste 50mm U Foam on plywood for cushioning of Back coverd with tepestry cloth with the help of suitable stappler pin for upholstery work .(as per sample kept in BSO Yard) . Note : Tepastry cloth (Not less than 200/- per mtr) as per sample kept in BSO Yard or shades approved by Engr-in-Charge

Taking down old unserviceable hand rest and S & F new hand rest made of 2nd class hard wood duly polished in black colour as per drg.

Taking down old unserviceable PVC caps and S&F new caps as per drg.

Taking down old unserviceable shoe and S & F new PVC/hard rubber shoes as directed by Engr in Charge.

M&L for welding in reapairs exceeding 2.5 but not exceeding 5cm length and thickness of metal to be welded not exceeding 6mm all as directed.

Mahesh Traders

M/s Green Leaf Electricals

M/s SK Construction