Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
| 3 | Admitted-Finance | Admitted-Finance |
| 4 | Rejected-Technical SANAT NAGAR SRINAGAR PIN 190005 J K | SRINAGAR | JAMMU AND KASHMIR | 190005 | Rejected-Technical experience issue |
Tender Value
Refer Docs
EMD Value
₹16,800
Closing Date
5 Aug 2023, 2:30 pmClosed
THE EXECUTIVE ENGINEER STD 2ND RAJBAGH
OFFICE OF THE EXECUTIVE ENGINEER STD 2ND RAJBAGH
Providing dedicated 11 kV Feeder to Sub District Hospital Magam from Receiving Station Magam
2023_PDD_218088_1
eNIT No STD-II /22 of 2023-24 Dated 20/06/2023
Open Tender
Electrical Works
Turn-key
30 days
BUDGAM
Please refer Tender documents.
4 documents required · 4 mandatory
₹1,000
THE EXECUTIVE ENGINEER STD 2ND RAJBAGH
₹16,800
17 Aug 2023
23 Jun 2023
7 Aug 2023
23 Jun 2023
5 Aug 2023
30 Jun 2023
Amount
Supply, Installation, Testing and commissioning of 11kV VCB Panel with breaker complete Set of reputed make 2 O/C (overcurrent) and 1 E/F (earth fault) relay (IEC61850) , Mimic Diagram, Voltmeter, Ammeter, Annunciation Windows with annunciation relays, 3-phase Tri-vector meter -5 Amps, DLMS Compliant with RS-485 port complete (12 kV, 1250A, 25 kA, Outgoing) complete Note:- Outgoing 11KV Panel VCB panel should be having 11KV CT of Ratio 600-300/5-5-5A
Supply and Erection of 9 Mtr. Long ST Pole(ST-410 SP33) with base plate and top cap including excavation of pit and back filling by boulders as per REC construction Standard (with latest amendments if any)
Supply,Laying,Testing, and commissioning of 11KV 120sqmm Xlpe Power Cable, 3- CORE, ALUMINIUM CONDUCTOR, XLPE INSULATED, ARMOURED CABLES, frls as per IS IS 7098 Part-2 of reputed make
Providing and fixing of Indoor Heat Shrinkable Cable Termination Kits of reputed make suitable for 11kV 3- Core 120sqmm Xlpe Power Cable
Providing and fixing of outdoor Heat Shrinkable Cable Termination Kits of reputed make suitable for 11kV 3 Core 120sqmm Xlpe Power Cable
Supply,Installation, Testing and commissioning of 11 kV Isolator with Earth Switch ,with three posts per phase, double break,3-pole, 630 Amps, gang operated out-door type, silver plated contacts with horizontal operating blade and isolator posts arranged vertically. Rotating blade feature with pressure relieving contacts is necessary
Providing and fixing of GI channel iron/ angle iron of sorts as per site requirement for Isolator/earthing/ cable support and Frame including nuts & bolt /Clamps
Supply,installation,testing and commissioning of 11kV Polymeric composite Pin Insulator with pins (12kV, 5kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm) of reputed make
Supply,installation,testing and commissioning of11kV Polymeric composite Disc Insulator with fittings (12kV,min failing load 45kN, Lighting Impulse 75kV Positive and 80kV Negative,creepage distance 320mm of reputed make)
Providing and laying of Cement bottoming of 9 mtr long ST Poles in mix 1:2:4 0.5cum/pole ( as per REC construction standard) using 20mm crush stone aggregate including shuttering ,form work etc.(0.5cum/pole)
Providing and fixing of earthing by GI Pipe 40 mm 3 mtr long through GI Strip 25x3 mm as per REC standards (with latest amendments if any)
Supply,installation,testing and commissioning of Gapless Surge Arrestor,9 kV ,10 kA with Polymer housing, Stn. Type as per the specification
Providing and painting of ST poles with one coat of Red oxide and two coats of aluminium paint to give even shade of reputed brand
Providing and Fixing of Danger Plates With Clamps
Providing and Fixing of Anti ClimbingvDevices With Clamps
Proviidng,Laying,stringing ,tensioning and binding of 0.1 ACSR Conductor (dog) as per REC construction standard (with latest amendments if any)
Providing and laying of HDPE Pipe outer dia 180 mm Inner dia 152 mm for laying of 11kV cable from control room to frame structure
Tech Infra Pvt Ltd
M/S S F ENTERPRISES
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .