Repair/replacement of external water supply distribution pipe line GI/CPVC at Zone B at Mil Stn Gaya

Amount

Repair to leaking joint of 15mm bore GI pipe line fixed on wall or laid in floor/ roof or in trenches including cutting chases/ excavation in any type of soil as required at site for working in workman like manner, opening the leaking joint by opening GI fitting or cutting the pipe, re-threading on site with ratchet die set, fixing GI pipe/ fittings, testing of repaired joint, returning and filling in to make good the disturbed surface to match with the existing one complete all as specified and as directed. Note: (a) GI pipe/ fittings required shall be measured and paid separately under respective item of BOQ as supply only. (b) Excavation earth works shall be measured and paid for separately. (c) Necessary PCC work shall be measured and paid for separately

All as per item srl No. 01 here-in-before but for 20 mm bore GI pipe

All as per item srl No. 01 here-in-before but for 25 mm bore GI pipe

All as per item srl No. 01 here-in-before but for 40 mm bore GI pipe

All as per item srl No. 01 here-in-before but for 50 mm bore GI pipe

All as per item srl No. 01 here-in-before but for 80 mm bore GI pipe

Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth for foundation etc or for laying pipe lines and getting out as in hard/dense soil complete all as specified and directed.

Returning filling in including spreading leveling, watering and well ramming in layer not exceeding 25 cm in hard/dense soil, complete all as specified and directed.

Removing excavated material to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed.

Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided for including disposal of unserviceable material complete all as specified and as directed.

M & L for PCC 1:3:6 type C-1 using 20mm graded stone aggregate for to support the pipe line etc, including necessary form work complete all as specified and directed.

Supply only GI reducing tee 20x15mm, ISI marked, complete all as specified and as directed.

Supply only GI reducing tee 25x20mm, ISI marked, complete all as specified and as directed.

Supply only GI reducing tee 50x25mm, ISI marked, complete all as specified and as directed.

Supply only GI reducing socket 20x15mm, ISI marked, complete all as specified and as directed.

Supply only GI reducing socket 25x15mm, ISI marked, complete all as specified and as directed.

Supply only GI reducing socket 25x20mm, ISI marked, complete all as specified and as directed.

Supply only GI reducing socket 40x25mm, ISI marked, complete all as specified and as directed.

Supply only GI reducing socket 50x25mm, ISI marked, complete all as specified and as directed.

Supply only GI elbow 15mm bore, ISI marked, complete all as specified and as directed.

Supply only GI elbow 20mm bore, ISI marked, complete all as specified and as directed.

Supply only GI elbow 25mm bore, ISI marked, complete all as specified and as directed.

Supply only GI reducing elbow 20x15mm, ISI marked, complete all as specified and as directed.

Supply only GI reducing elbow 25x15mm, ISI marked, complete all as specified and as directed.

Supply only GI reducing elbow 25x20mm, ISI marked, complete all as specified and as directed.

Supply only GI tee 25mm bore, ISI marked, complete all as specified and as directed.

Supply only GI tee 20mm bore, ISI marked, complete all as specified and as directed.

Supply only GI tee 15mm bore, ISI marked, complete all as specified and as directed.

Supply only GI union 50mm bore, ISI marked, complete all as specified and as directed.

Supply only GI union 40mm bore, ISI marked, complete all as specified and as directed.

Supply only GI union 25mm bore, ISI marked, complete all as specified and as directed.

Supply only GI union 20mm bore, ISI marked, complete all as specified and as directed.

Supply only GI union 15mm bore, ISI marked, complete all as specified and as directed.

Supply only GI socket 15mm bore, ISI marked, complete all as specified and as directed.

Supply only GI socket 20mm bore, ISI marked, complete all as specified and as directed.

Supply only GI socket 25mm bore, ISI marked, complete all as specified and as directed.

Supply only GI hexa nipple 15mm bore, ISI marked, complete all as specified and as directed.

Supply only GI hexa nipple 20mm bore, ISI marked, complete all as specified and as directed.

Supply only GI hexa nipple 25mm bore, ISI marked, complete all as specified and as directed.

Supply only GI nipple 15mm bore x 75mm lenghth, ISI marked, complete all as specified and as directed.

Supply only GI nipple 15mm bore x 100mm length, ISI marked, complete all as specified and as directed.

Supply only GI nipple 15mm bore x 150mm length, ISI marked, complete all as specified and as directed.

Supply only GI nipple 20mm bore x 75mm length, ISI marked, complete all as specified and as directed.

Supply only GI nipple 20mm bore x 100mm length, ISI marked, complete all as specified and as directed.

Supply only GI nipple 20mm bore x 150mm length, ISI marked, complete all as specified and as directed.

Supply only GI nipple 25mm bore x 75mm length, ISI marked, complete all as specified and as directed.

Supply only GI nipple 25mm bore x 100mm length, ISI marked, complete all as specified and as directed.

Supply only GI nipple 25mm bore x 150mm lengh, ISI marked, complete all as specified and as directed.

Supply only mild steel plug suitable for 15mm bore pipe, ISI marked, complete all as specified and as directed.

Supply only mild steel plug suitable for 20mm bore pipe, ISI marked, complete all as specified and as directed.

Supply only mild steel plug suitable for 25mm bore pipe, ISI marked, complete all as specified and as directed.

Supply only white threaded dhaga packet of containing 60 golas in each packet, complete all as specified and as directed.

Supply only haxa blade double edge (100 Nos in each packet) complete all as specified and as directed.

Supply only pig lead ingot of 200 gm each piece complete all as specified and as directed.

Supply and fixing in replacement 15 mm bore galvanised steel tubing medium grade, ISI marked including necessary fittings complete all as specified and as directed.

All as per item srl No. 55 here-in-before but GI pipe 20 mm bore.

All as per item srl No. 55 here-in-before but GI pipe 25 mm bore.

All as per item srl No. 55 here-in-before but GI pipe 40 mm bore.

All as per item srl No. 55 here-in-before but GI pipe 50 mm bore.

Supply and fixing in replacement gun metal gate valve with iron wheel head screwed both end suitable for 15mm bore pipe, ISI marked, complete all as specified and as directed.

All as per item srl No. 60 here-in-before but for 20 mm bore GI pipe

All as per item srl No. 60 here-in-before but for 25 mm bore GI pipe

All as per item srl No. 60 here-in-before but for 40 mm bore GI pipe

All as per item srl No. 60 here-in-before but for 50 mm bore GI pipe

S & F in replacement PTMT stop cock suitable for 20mm bore pipe, ISI marked, complete all as specified and as directed.

All as per item srl No. 65 here-in-before but for 25 mm bore GI pipe

S & F in replacement PTMT bib tap suitable for 15mm bore pipe, ISI marked, complete all as specified and as directed.

S & F in replacement 15 mm dia forged brass ball valve high pressure with brass (nickel plated) ball and epoxy coated aluminium rod screwed for iron pipe and fixed (minimum weight 15mm - 190 gms) complete all as specified & directed.

All as per item srl No. 68 here-in-before but for 20 mm bore GI pipe

All as per item srl No. 68 here-in-before but for 25 mm bore GI pipe

Taking down existing old and unserviceable sluice valve removing from site and depositing to MES store. S & F cast iron non rising sluice valve, SS spindle 80 mm bore, flanged ends PN-1.6 ISI marked as per IS:14846/ 2000 and CI operating wheel including gasket, nuts, bolts and washers complete all as specified & directed. Make: RMCO/Kartar/Bir/Upadhayay

M/S CHAUHAN CONSTRUCTION

MS HARI MOHAN GUPTA

BISHWNATH KUMAR BHARTI

New Era Engineers

M/S ABHAY KUMAR AND BROTHERS

AASHIRWAD ENTERPRISES

SARKAR BUILDERS

ARYA ENTERPRISES