PROVN OF VIEW CUTTER IN TRG AREA AND PARKING SHED NEAR BLDG NO CB325 326 AND 327 IN DEMO BN AND ADDN ALTN OF TRG SHED BLDG NO CB325 TO 328 IN DEMO BN UNDER GE MIS MHOW

Amount

Demolition of cement concrete (unreinforced) in Concrete of any description and in any position not otherwise specifically provided for complete all as specified

M&L for plain cement concrete 1:4:8 type D2 using 40mm graded stone aggregate as in foundation filing,sub base of floor etc complete all as specified

M&L for plain cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in floor , finished the surfaces of concrete topping even and fair complete all as specified and directed.

M&L for brickwork with modular size fly ash bricks , straight or cured on plan exceeding 6m mean radius built cement mortar 1:6 complete all as specified and directed.

M&L for hardcore with of broken stone or boulder of gauge not exceeding 63 mm, deposited, spread and leveled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete

M&L for Machine cut Kota stone slab flooring 20 mm thick (+/- 2mm) thick of size 58cm x 58cm (or nearest size as available in the market) laid over and including 15mm thick screed bed in cement mortar 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing to mirror finish, complete all as specified and directed

M&L for Machine cut Kota stone slab flooring 20 mm thick as in riser of steps,skirting,dado,pillar etc laid over and including 10mm thick backing coat /rendering in cement mortar 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing to mirror finish, rounding or moulding of kota stone edge , complete all as specified and directed

M L for rendering 15mm thick plaster in CM 1:6 on faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified

Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in soft and loose soil complete all as specified

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, for shafts, wells, cespits, manholes, pier hold etc not exceeding 10 Sqm on plan and getting out in soft / loose soil complete all as specified

S&F rolled mild steel section as in main and cross beam, hip and jack rafters; purline where connected to common rafter and running rail and guides for sliding door;fixed with angle cleat or other connecting plates conforming to 410-W (Gde-E-250)quality A complete all as specified

S&F mild steel screw bolts 11mm to 15mm dia( Machine made) with hexagonal or square head one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square exc.10cm but not exc 15cm long complete all as specified

S&F Pre-painted Galvalume / Zinkalume corrugated sheeting 0.50 mm thickness as in roof, etc, having crest depth 28-30mm at a pitch of 195-250 mm and having 2 ribs in between for addition strength fixed with zink coated self drilling fastener including EPDM washer complete laid with one corrugation side laps and min 150mm end lap complete all as specified.

M&L for preparation of new steel or iron surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all specified.

M&L for plain cement concrete 1:4:8 type D2 using 40mm graded stone aggregate ,100mm thick as in subbase ,floor etc complete all as specified

M&L for sand filling including spreading,watering,consolidation, leveling in layers not exceeding 25 cm thick complete all specified and directed

M&L for 80mm thick machine pressed rubber moulded precast concrete interlocking paver block (glossy finish) of M-35 grade of approved shape, size and colour conforming to IS 15658-2006 including joints filled with sand over and including stone dust 30mm thick as in levelling course for interlocking complete all as specified

S&F mild steel framed work as in doors or gates of angle or other section (Fe 410-W (Gde E-250) quality A) with gusset plates,rails,braces etc,complete,drilles for fixing of steel sheeting or other covering doors etc.to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fitting (exclusive of steel sheeting or other covering, running rails and guides) and hanging also fastening and fixing complete all as specified

M&L for plain cement concrete 1:3:6 type C2 using 40 mm graded stone aggregate as in sub base of floor complete all as specified

M/S Sunshine Construction (BID ID -3094557)

J B CONSTRUCTION AND DEVLOPERS (BID ID -3094040)

ss construction (BID ID -3094208)

M/s Himgiri construction (BID ID -3094602)

APconstruction (BID ID -3094409)

NIDHI CONSTRUCTION (BID ID -3094472)

M/S UnitedConstruction (BID ID -3094272)

M/S Parikshit Sharma (BID ID -3094483)