SPL REPAIRS TO STORAGE SHEDS NOS P-77 AND P-80 OF GE (ENGR PARK), JALANDHAR CANTT AND CERTAIN OTHER SANCTIONED WORK UNDER GE (EAST) JALANDHAR CANTT

Amount

Dismantling asbestos cement (corrugated, semi corrugated etc) sheets in roof coverings complete all as specified and directed.

Supply and fixing Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed

Supply and fixing Pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed

Dismantling wall and ceiling boards (fiber, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.

Supply and fixing false ceiling with Everest fibre cement designer tile ivory painted (high pressure steam cured) of 4mm thickness (as per IS : 14862) of size 595 x 595mm and any one of the design (oceanic, lake & hill, cascade or electra) in true horizontal level, suspended on interlocking meta grid of hot dipped galvanized steel sections (galvanized @ 120 gms, both side inclusive) consisting of main ‘T’ runner with suitably spaced joints to get required length and 15 x 32mm made from 0.3mm thick sheet and cross ‘T’ of size 15 x 32mm made of 0.30mm sheet, spaced between main ‘T’ at 600mm c/c to form a grid of 600 x 600mm and wall angle of size 15 x 20mm made of 0.30mm thick sheet and laying false ceiling tiles in the grid including, required cutting/ making, opening for services like diffusers, grills, light fitting, fixtures, smoke detectors etc. main ‘T’ runners to be suspended from ceiling using GI soffit cleats fixed to existing rafter, purlin, etc with dash fasteners, GI adjustable rods of 3mm dia with galvanized butterfly level clips, spaced at 1200mm c/c along main ‘T’ bottom exposed width of 15mm of all T-sections shall be center black pre-painted with polyester paint and having a load bearing capacity of 12 Kg/ Sqm complete all as specified and directed

Supply and fixing steel work tubular sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and directed

Taking down chowkhats or frame with shutter (without taking off shutter from the frame) area n. exc. 1.5 Sqm each for doors and windows complete all as specified and directed.

Taking down chowkhats or frame with shutter (without taking off shutter from the frame) area exc. 1.5 Sqm but n. exc. 4 sqm each for doors and windows complete all as specified and directed.

Material and labour for mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc. using steel conforming to Fe-290 Gde-E-165 complete including drilled for fixing of steel sheeting or other covering; doors, door frame chowkhats etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing including necessary cutting drilling and welding etc complete all as specified and directed.

Material and labour 35mm thick 2nd class hard wood factory made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in clause 8.24 (a) of SSR Part-I; supplied and fitted to chowkhats complete all as specified and directed.

Material and labour for galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed.

Material and labour 35mm thick 2nd class hard wood factory made plain framed, paneled shutters (two panels), with lock rail and panels of 9mm thick BWP commercial ply or of veneered particle board 12mm thick with commercial veneering on both faces with rails and style. The size of rail and stile as per IS: 1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed.

Supply and fixing steel window 1.25 mm thick box type (primer coated) ERW hollow P section of size 60mm x 25mm single rebated comprises glazed skeleton shutter ERW sec 50mm x 20mm and 1mm thick with two openable leaf consisting two No sash bars of T-section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T-section of size 60mmx25mm and 1.25mm thick including cutting holes and making good dismantled portion PCC (1:2:4) type B-1 four No for each window) including following fittings welded to frame shutter: - (a) Hold fast, 150mm long of 12mm x 3mm made to shape-04 No per window. (b) Handle of z section 20mm x 25mm, 100mm long 01 No per leaf (c) MS tower bolt 150mm long- 2 No per leaf (d) z section 20mmx25mm, 100mm long stopper - 01 No per leaf (f) MS pintal hinges of size 75mmx12mm- 2 No per leaf (g) Fabrication & fixing arrangement as per Drg No CEJZ/TD-06/07. Note: Grills/ guard bars, glass, wire mesh and painted shall be measured and paid separately under respective item of this BOQ.

All as per ser item No. 13.00 but as in ventilators

Supply and fixing framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed

Supply and fixing powder coating anodised aluminium frame for doors, windows, ventilators/ partitions with one or more rebates including joining cleat/ rubber beading for fixing etc. complete all as specified and directed

Material and labour for powder coating anodised aluminium door shutter with frame having section of top, lock, bottom rail and style of size 114mm x 45mm x 3mm thick and style of size 80 x 45 x 3mm thick including necessary fittings, joinery cleat, 5.5 mm thick tinted sheet glass glazing and bottom 3mm thick ACP (Aluminium composite panels), packing snap beading 10mm x 10mm, anodised aluminium handle 250 mm (2 Nos for each shutter) 100 mm size stainless steel chromium plated butt hinges (03 Nos for each shutter), aluminium tower bolt 200 mm long (02 Nos of each shutter), moric lock with key including frame of size 100mm x 45mm x 3mm and fixing complete all as specified and directed.

Dismantling floor, hearth or wall tiling/ china mosaic including cement mortar bedding (but not backing), removing rubbish off outside MD land complete all as specified and directed.

Material and labour for non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exc. 0.11 Sqm but not exceeding 0.18 Sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 15mm thick screed bed or bedding layer in cement mortar (1:6) complete all as specified and directed.

All as per item No 19.00 but in skirting/ dado laid over and including 10mm thick rendering in cement mortar (1:4).

Material and labour machine cut Kota stone slab 20-25mm thick as in flooring and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding, rubbing and polishing to mirror finish with & including screed bed or bedding layer of mortar 15mm thick in cement mortar (1:6) for laying floor finishes complete all as specified and directed

All as per item No 21.00 but in skirting/ dado laid over and including 10mm thick rendering in cement mortar (1:4).

Material and labour for 18-20mm thick machine cut Kota stone slab 550mm x 550mm size in single piece size in treader & landings of stair cases including bull nose edge, flooring, jointed with grey cement mixed with pigment to match the shade of the slab including grinding, rubbing and polishing to mirror finish with & including screed bed or bedding layer of mortar 15mm thick in cement mortar (1:6) for laying floor finishes including neat cement slurry with 3 Kg/ Sqm complete all as specified and directed

All as per item No 23.00 but in skirting/ dado laid over and including 15mm thick rendering in cement mortar (1:4).

Supply and fixing 250mm long aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed in repair complete all as specified and directed.

Supply and fixing 100mm size mild steel butt hinges, medium weight, cold rolled and fixed with screws/welded to frame complete all as specified and directed.

Supply and fixing MS barrel tower bolt 200mm long stove enameled black with bright bolt and fixed complete all as specified and directed.

Supply and fixing aluminium handle cast type anodised 150mm long complete all as specified and directed.

Material and labour for preparation of new wood and wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Material and labour for preparation of old painted wooden surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified & directed.

Material and labour preparation of new or previously untreated steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Material and labour for preparation of old painted steel surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified & directed.

Material and labour for cutting holes in brick walls built in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar (1:3) or cement concrete (1:2:4) type B-1 as required, depth of embedded portion of holdfasts or lugs measured from the face of the jamb into the wall exc. half brick but n. exc. one brick complete all as specified and directed.

Taking down cement plaster on brick/stone masonry any description including racking out joints hacking for key, scrubbing down with water etc. and removing rubbish complete all as specified and directed.

Material and labour for 15mm thick cement mortar (1:6) on fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

Material and labour for 15mm thick cement mortar (1:4) on fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

Material and labour for 15mm thick cement plaster on brick or concrete surfaces in cement mortar (1:4) mixed with integral water proofing compound in the proportion recommended by manufacturer, surfaces finished fair and even complete all as specified and directed. (WPC shall be measured and paid separately under appropriate item of this BOQ).

Material and labour for preparation of newly plastered surface of walls and applying two coats of cement base paint complete all as specified and directed.

Material and labour for preparation of new plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.

Material and labour complete removal of existing treatment from wall surface and applying two coats of cement base paint complete all as specified.

Material and labour complete removal of existing treatment from wall surface and applying three coats of white wash complete all as specified.

Material and labour complete removal of existing treatment from wall surface and applying two coats of oil bound distemper over a coat of chalk whitening and one coat of birla white putty complete all as specified.

Dismantling structural steel work including grills, wind ties, door, gates but excluding framed truss etc complete all as specified.

Supply and fixing rolled mild steel work roof trussed (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, Tee, Angle, Channel or Flat Sections) including distance pieces, cleats etc, Fe-410-W (Gde E-250) complete all as specified and directed.

Material and labour for Mild steel work wind tie etc for roof including securing bolt, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified.

Demolition of brick work or stone/ boulder masonry built in cement mortar including all quoins, arches, pillars etc. but excluding ashlars facing, dressed stone work & precast concrete articles complete all as specified and directed.

Material and labour brick work with old size sub class 'B' bricks, straight or curved on plan exceeding 6m mean radius and built in cement mortar (1:4) complete all as specified and directed.

Supply only liquid water proofing compound complete all as specified and directed.

Material and labour preparation of new plastered surface of ceiling and applying three coats of white washing complete all as specified and directed.

Supply and fixing Steel ventilators, fixed type, with glazing bars complete all as specified and directed.

Material and labour 3mm thick sheet glass ordinary quality and glazing with oil putty wooden beads in squares n. exc. 0.50 sqm in each pane complete all as specified and directed.

Demolition of cement concrete in ground floor and paving n. exc. 15cm thickness (below or above ground level) complete all as specified and directed.

Material and labour for 50mm thick PCC (1:3:6) type C-1 using 20mm graded stone aggregate as in plinth protection, laid in panels including finishing the concrete surface even & smooth without using extra cement complete all as specified and directed.

Material and labour for 25mm thick cement concrete (1:2:4) type B-1 using 20mm graded aggregate and finishing the surface fair and even to receive the top layer complete all as specified and directed.

Material and labour for 4mm thick asbestos fibre cement plain building boards fixed to timber frame work with screws as in flat ceiling complete all as specified and directed.

Supply and fixing angle iron as in frame of ceiling and fixed with angle iron cleats and 8mm MS round bard to ceiling complete all as specified and directed.

Material and labour for 5mm thick in cement mortar (1:3) as on ceiling including finishing the surface even and smooth without using extra cement complete all as specified and directed.

Material and labour for preparation of old surfaces of walls including scraping down smoke soots, moulds, moss and trading oil and greasy spots etc including cornices, pilasters etc. on plastered or un plastered surfaces and applying two coats of white wash complete all as specified.

All as per srl item No. 58.00 here-in-before but on ceiling

Material and labour for preparation of old decorated surfaces of walls, including washing, rubbing down and stopping of distempered and painted surfaces and applying one coat of oil bound distemper complete all as specified and directed.

Material and labour for preparation of old decorated plastered or un-plastered surfaces of walls including cornices, pilasters etc and applying two coats of cement base paint complete all as specified & directed.

Dismantling of brick tiles single layer as in roof covering all as specified and directed.

Demolition of mud in roofs any thickness including plastering and leaping (whether full thickness removed or only a part thereof) complete all as specified and directed.

Material and labour for bitumen primer applied on plastered surface of roof at the rate of 0.40 kg/sqm of surface area of roof for water proofing and dump proofing treatment complete all as specified and directed.

Material and labour applying a coat of hot blown paving industrial bitumen 85/ 25 @ 1.20 kg/ sqm over a coat of primer @ 0.3 litre per sqm over the roof surface including cleaning surfaces complete all as specified and directed.

Material and labour for APP based polymeric membrane minimum weighing 3kg/ sqm and minimum 3mm thick reinforced with polyester non wove fabric (wt. not less than 150 gms/ sqm) laid on primed surface by forced application complete all as specified and directed.

Material and labour for brick tile terracing with 40mm thick brick tiles laid over and including 15mm thick screed in cement mortar (1:6) and joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement complete all as specified and directed.

Material and labour for cutting out cracks to V-section in existing RCC roof slabs or terracing, cleaning out and filling with a hot mixture of bitumen VG-10 and clean dry sand 1:1 (by weight) complete all as specified and directed.

Material and labour for flush pointing in cement mortar (1:3) to bricks laid flat on roof and wall complete all as specified and directed.

Material and labour for PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands plinth courses, roof kerbs or mud stops, benching, coping, bed plates, parapets, water through and the like etc including weathering, slightly rounded or chamfered angles throating, edges of interlocking/ chequered tiles etc complete including necessary form work complete all as specified and directed

Material and labour for hacking out old broken glass (any thickness, size, quality or description) from wooden or steel framed glazed with putty or fixed with beads complete all as specified and directed.

Material and labour for repairing of RCC projections, chajjas, roofs, fascia etc by necessary preparation, scarping, cutting, chiseling de-rusting and cleaning exposed reinforcement, surfaces of damaged, loose RCC surfaces with cement concrete (1:1½:3) using 12.5mm graded crushed stone aggregates and reinforcement with expended metal/ welded mesh of weight exc. 2 kg per sqm but n. exc. 3 kg per sqm with ot without facia and finished with cement and sand mortar (1:3) using coarse sand and work in patches area n. exc. 5 sqm each and thickness of RCC member n. exc. 70mm including necessary form work and applying two coats of cement base paint of tint matching with the existing surfaces; work in building at any height as required complete all as specified and directed.

Supply and fixing rotational moulded polyethylene water storage tanks, 500 litres capacity, (cylindrical vertical with closed top), ISI marked, hoisted and fixed in position all as specified in SSR Part I, fixed in position including dismantling of existing tank of any description all as specified and directed.

Supply and fixing rotational moulded polyethylene water storage tanks, 1000 litres capacity, (cylindrical vertical with closed top), ISI marked, hoisted and fixed in position all as specified in SSR Part I, fixed in position including dismantling of existing tank of any description all as specified and directed.

Taking down carefully existing point wiring of any type/ any size (ie on wooden/ batten, surface conduit, casing capping or concealed conduit) complete for light, fan socket or power point etc including removing switches, sockets, holders, ceiling rose, pendants, regulators, light fittings, switch board outlets with sheets and other materials from site for refixing of serviceable light and for taking credit of unserviceable light as per Sch of credit and making good disturbed surface walls, roof, floors etc with any type of civil work involved complete all as specified and directed

Material and labour for point wiring with 1.5 sqmm (nominal area), 1100 volt grade PVC insulated FRLS type multi stranded copper conductor cable drawn in and including concealed rigid PVC conduit fire proof ISI marked with accessories including cutting chases for laying of conduit/ fixing of boxes in walls/ floors etc including making good to disturbed surfaces as per adjoining specification and terminated in concealed terminal boxes including MS concealed terminal boxes with plastic laminated bakelite sheet top cover 3mm thick make hylum or equivalent fixed with nickel polished screws with washers and earth continuity PVC insulated FRLS type cable with stranded copper conductor of size 1.5 sqmm (nominal area) green colour as earth wire connected with earth dolly for one light point controlled by one switch complete all as specified and as directed.

All as per srl item No 76.00 here-in-before but One fan point controlled by one switch and regulator

All as per srl item No 76.00 here-in-before one socket outlet 5 Amp controlled by one switch on independent board.

All as per srl item No 76.00 here-in-before one socket outlet point 5 Amp on same board controlled with other switch.

All as per srl item No. 76.00 here-in-before but with 2.5 Sqmm (nominal area) PVC stranded copper conductor cable 3 pin 15 Amp socket outlet with 2.5 Sqmm PVC insulated with stranded copper conductor cable for continuous earth continuity conductor independent board complete all as specified and directed.

Supply and fixing switch piano flush type, 5 Amps, 240 Volt AC single pole, one way complete all as specified.

Supply and fixing switch piano flush type, 15 Amps, 240 Volt AC single pole, one way complete all as specified.

Supply and fixing socket out let 5 Amp, 5 pin flush type complete all as specified.

Supply and fixing socket outlet multipurpose 3 in 1, 5/6 pin, 5 & 15 Amps, flush type complete all as specified

Supply and fixing batten holder ISI marked insulated body complete all as specified.

Supply and fixing LED retrofit lamp 9W, 6500K, 220-240V, B-22 base cap complete all as specified and directed.

Supply and fixing ceiling rose surface type bakelite 65 x 50mm three terminal complete all as specified.

Supply and fixing five step fan regulator, electronic type, single phase, including connecting complete all as specified and directed.

Material and labour in replacement sheet metal enclosure DBs when MCBs to be used, SPN 8 ways 240 V, with copper bus bar, double door, epoxy powder coated inside and outside with earth bar and neutral bar, prewired complete all as specified.

Supply and fixing MCB SP 6 to 32 Amps, B-curve, 10 KA complete all as specified and directed.

Supply and fixing MCB SPN 32 Amps, B-curve, 10 KA complete all as specified and directed. Make for Srl No. 90.00 & 91.00 : Osafe series of HPL/ DX3 range of Legrand/ Betagard 5SL series of Siemens/ Acti 9 range of Schneider

Material and labour for Sub main wiring with PVC insulated cable copper conductor FRLS two single core 4 Sqmm drawn through PVC rigid non metallic conduit including earth continuity FRLS copper conductor 4 Sqmm PVC insulated with green insulation complete all as specified. Note : Two runs of single core 4 sqmm and one run of 4 sqmm PVC insulated stranded copper conductor through PVC rigid concealed conduit shall be measured as one RM.

Supply and fixing Deco Ultra Slim linear LED lighting fixture with co-extruded polycarbonate body environmental friendly energy efficient ready to use pack 20 W LED 6000K with square decorative end caps complete all as specified and directed

Supply and fixing energy saving & environmental friendly long life versalite pressure di-cast aluminium luminaire with heat resistant glass and suitable optics for uniform distribution of light 25/ 35 watt LED for bldg security lights with high efficiently electronic driver, having IP-66 protection, surge protection min 2 KV power factor more than 0.9 complete operative on AC supply 140 volts to 270 volts pre-wired and product should be made in India qty including bracket made out of GI pipe 25mm dia bent to shape and clamps 40 x 6mm with nuts and bolts prewired products must be made in India only connection and testing complete all as specified. Note: (i) Contractor shall be provided 2 years written manufacture's guarantee for the LED fixture complete including driver from the certified date of completion. (ii) Contractor shall be produce LM-79 & LM-80 report of NABL accredited laboratory from manufacturer's

S&F in repair ultra modern designed architectural LED luminaire and energy efficient recessed mounted LED 34 watt 2 x 2 suitable for Armstrong/ grid ceiling including taking down old one with all accessories complete all as specified and directed.

Material and labour for earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground vertically at a depth not less than 2.25 metre below normal ground level with top edge of the plate at a depth not less than 1.5 metre below normal ground level, connected with and including GI wire 4mm in and including GI pipe 15mm bore light grade as protection pipe (from top of earth plate up to the test point) by means of GI bolts, nuts, check nuts and washers of GI and thimbles, earth plate surrounded by packed layers of charcoal dust and common salt 15cm thick, all around including top and bottom and watering pipe 20mm bore of GI pipe medium grade with funnel and wire mesh, PCC chamber of size 300 x 300 x 300mm (top of chamber minimum 15 cm above the normal ground level with MS iron frame on top made of 30x30x3 mm MS angle iron duty painted (1:3:6) using 20mm graded stone aggregate and 50mm thick RCC cover in (1:2:4) type B-1 using 20mm graded crushed stone aggregate with 1 Nos MS handles of 8mm dia including necessary excavation/ earth work in any type of soil/rock and as shown in Electrical plate No. 3 of SSR Part-I (2009) testing on completion complete all as specified and directed. Note: If result is not achieved satisfactory, contractor will have to do re-earthing at his own cost. Nothing shall be paid extra on this account.

Supply, laying, jointing and testing XLPE insulated, PVC sheathed , steel strip or wire armoured electric cable 1100 volt grade (heavy duty) with stranded aluminium conductor of size 16 Sqmm, 2 core laid in trenches, in floor, in duct, through pipes/ culvert or along the pole/wall complete all as specified and directed

All as per srl item No. 97.00 here-in-before but size 16 Sqmm, 4 Core

All as per srl item No. 97.00 here-in-before but size 25 Sqmm, 4 Core

Excavation in trenches in soft/ loose soil not exceeding 1.5 m wide and not exceeding 1.5 m in depth for laying of cables, erecting poles, stay assembly etc. and getting out complete all as specified.

Returning filling in, including spreading, levelling, watering and well ramming in layers n.exc 25 cm thick each layer complete all as specified and directed..

Removal of surplus spoil to a distance n. exc. 50 mtr and depositing where directed at a level n.exc. 1.5 mtr above the starting point complete all as specified and directed

Supply & laying old size sub class 'B' bricks laid flat in trenches over the cable with the length of brick perpendicular to the direction of cable length complete all as specified and directed

Material and labour for sand cushioning with 8cm thick layer of sand before laying of cable and 15cm thick after laying of cable in trenches complete all as specified and directed

Supply and fixing 50mm bore galvanised pipe light grade fixed along poles/ to walls/ laid under floor complete with and including fittings and clamps as required complete all as specified and directed.

Taking down and refixing ceiling fan of any sweep or make, filling cavities with filler one coat after cleaning, painting the complete fan (as per previous colour) using synthetic enamel paint by spraying including replacement of flexible wire, rubber reel, nut, bolts etc. and re-fixing in original position complete all as specified and directed.

Supply and fixing vertical load-line DB 4 way with bus bars, neutral links, blanking plates suitable for fixing of 63A MCCB as incomer and MCB for outgoing fixing in wall complete all as specified and directed. Make : Siemens/ Legrand/ Schneider/ Havells

Supply and fixing vertical load-line DB 4 way with bus bars, neutral links, blanking plates suitable for fixing of 100A MCCB as incomer and MCB for outgoing fixing in wall complete all as specified and directed. Make : Siemens/ Legrand/ Schneider/ Havells

Supply and fixing MCCB FP 63 Amp, 415V with adjustable type, with breaking capacity 16 KA suitable for vertical load-line DB complete all as specified and directed Make : Siemens/ Legrand/ Schneider/ Havells

Supply and fixing MCCB FP 100 Amp, 415V with adjustable type, with breaking capacity 36 KA suitable for vertical load-line DB complete all as specified and directed Make : Siemens/ Legrand/ Schneider/ Havells