CERTAIN REPAIR TO AVIATION ASSETS OF 660 ARMY AVN SQN AT PATIALA MIL STN

Amount

Taking down cement plaster of any description, any thickness from external surfaces of walls/soffits etc. incl raking out joints, hacking for keys, scrubbibg down with water etc complete all as specified and directed.

M&L for Rendering 15 mm thick in cement mortar 1:4 , mixed with water proofing compound, on brick or concrete surfaces, trowelled to even and fair finish without using extra cement (WPC to be measured separately) complete all as specified.

Supply only liquid Water proofing compound complete.

M&L for Rendering 15 mm thick in cement mortar 1:6, on brick or concrete surfaces, trowelled to even and fair finish without using extra cement complete all as specified.

M&L for Rendering 5 mm thick in cement mortar 1:3 as on concrete surfaces in ceiling finished even and smooth without using extra cement all as specified.

M&L for preparation of new plastered surfaces of walls and applying two coat of interior emulsion paint by using roller to wall surfaces over and including a coat of acrylic wall care putty of 0.5mm to 1mm thick ( in 1/2 coats as required) complete all as specified.

M&L for preparation of new plastered surfaces of walls and applying two coat of oil bound distemper over and including 0.5 to 1 mm thick white wall care putty (in 1/2 coats as required) complete all as specified and directed.

M&L for preparation of new plastered surfaces on walls and applying two coat of white wash complete all as specified and directed.

M&L for preparation of new plastered surfaces to external walls/RCC surfaces/soffits of chajjas/roof projections /cantilevers /balcony etc surfaces and applying two coats of exterior emulsion paint by using roller over and including wall care putty of 0.5mm to 1mm thick ( in 1/2 coats as required) complete all as specified.

M&L for prepartion of new plastered surfaces of walls and applying two coat of cement based paint on external walls complete all as specified and directed.

M&L for preparation of new plastered surfaces of ceiling and applying three coat of white wash complete all as specified

M&L for preparation of old treated surface of walls (plastered/unplastered ) including cornices, Pilasters etc by brooming down or steel wire brushing, scraping down smoke , soot moulds , moss and efflorescent salts, trading oil and greasy spots and applying one coat of white wash, leaving premises clean and tidy all as specified and directed by the Engineer-in Charge.

All as per item No 12 above but one coat of white wash on ceilings complete all as specified and directed.

All as per item No 12 above but one coat of oil bound distemper on walls complete all as specified and directed.

All as per item No 12 above but one coat of cement based paint on walls complete all as specified and directed.

All as per item No 12 above but one coat of interior emulsion paint by using roller to wall surfaces complete all as specified and directed.

All as per item No 12 above but one coat of exterior acrylic emulsion paint by using roller to wall surfaces complete all as specified and directed.

Preparation of old treated surfaces of steel/asbestos sheet (wall/roof) and applying one coat of synthetic enamel paint as in camouflaging pattern having percentage of colour as 40% olive green, 40% dark brown and 20% sand stone at height n.exc 15mtr as per sample/pattern approved by GE complete all as specified and directed by Engr-in-Charge. Note : 1. The %age of the three colours may change without any financial effect by GE. 2. Contractor shall take all necessary safety precautions alongwith insurance cover to his workmen before commencement of work. Unit rates quoted shall deemed to be inclusive of all such factors and nothing extra including compensation to workmen in any manner is payable on this account.

Preparation of old treated/plastered surfaces and applying one coat of exterior emulsion paint in camouflaging pattern having percentage of colour as 40% olive green, 40% dark brown and 20% sand stone at height n.exc 15mtr as per sample/pattern approved by GE complete all as specified and directed by Engr-in-Charge. Note : 1. The %age of the three colours may change without any financial effect by GE. 2. Contractor shall take all necessary safety precautions alongwith insurance cover to his workmen before commencement of work. Unit rates quoted shall deemed to be inclusive of all such factors and nothing extra including compensation to workmen in any manner is payable on this account.

Preparation of old steel and iron surfaces of any description exc 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old painted wooden surface of any description in any position and location not otherwise described over 10 cms width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed by the Engr-in-Charge .

Dismantling Asbestos Cement (corrugated, semi-corrugated,etc.) sheet in roof coverings complete all as specified and directed. Note : The rates includes rates of scaffolding to work at a height of 10-15m hangars. Contractor shall take all necessary safety precautions alongwith insurance cover to his workmen before commencement of work. Unit rates quoted shall deemed to be inclusive of all such factors and nothing extra including compensation to workmen in any manner is payable on this account.

S&F pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws,complete all as sepcified and directed. Note : The rates includes rates of scaffolding to work at a height of 10-15m hangars. Contractor shall take all necessary safety precautions alongwith insurance cover to his workmen before commencement of work. Unit rates quoted shall deemed to be inclusive of all such factors and nothing extra including compensation to workmen in any manner is payable on this account.

S&F pre-painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete, all as sepcified and directed. Note : The rates includes rates of scaffolding to work at a height of 10-15m hangars. Contractor shall take all necessary safety precautions alongwith insurance cover to his workmen before commencement of work. Unit rates quoted shall deemed to be inclusive of all such factors and nothing extra including compensation to workmen in any manner is payable on this account.

S&F in repairs for welded steel wire fabric n exc 4 Kg per Sqm complete to wood or steel members, size and dia as directed. Note : The rates includes rates of scaffolding to work at a height of 10-15m hangars. Contractor shall take all necessary safety precautions alongwith insurance cover to his workmen before commencement of work. Unit rates quoted shall deemed to be inclusive of all such factors and nothing extra including compensation to workmen in any manner is payable on this account.

Dismantling wrought iron or mild steel work of any description not otherwise provided for purlins, runners etc Note : The rates includes rates of scaffolding to work at a height of 10-15m hangars. Contractor shall take all necessary safety precautions alongwith insurance cover to his workmen before commencement of work. Unit rates quoted shall deemed to be inclusive of all such factors and nothing extra including compensation to workmen in any manner is payable on this account.

Demolition of brick work built in cement mortar complete all as specified and directed.

M&L Brick work with sub class 'B' bricks straight or curved on plan exceeding 6m mean radius bulit in C:M 1:6 complete all as specified and directed.

Excavating in post holes (or similar holes) as in soft/loose soil each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and directed.

M & L for cement concrete 1:2:4 type B2 using (40mm graded stone aggregate) as in post holes/foundation filling mass concrete complete all as specified and directed.

S&F steel work in square pipe/tubular/angle as in post, rafter, purlins, including special shaped washer etc, complete using ERW or induction butt welded tubes including distances pieces, base plates, nut bolts etc including complete all as specified and directed.

M&L for preparation of new surfaces of steel of any description, over 10 cm in width or girth, not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide complete all as specified and directed.

S&F in repair amluminium door closer (extruded section) hydraulically regulated designation No. 3, universal type, suitable for door shutters of 851 to 1000mm in width and weight between 61 to 80 Kg complete all as specified and directed.

Taking down chowkhats or frames (without taking off shutters from the frame) exc 1.5 Sqm and n. exc 4.00 Sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified.

Taking down chowkhats or frames (without taking off shutters from the frame) n. exc 1.5 Sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified.

S&F factory made Flush shutters 30mm solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F 2nd class hard wood factory made plain framed panelled door shutters 35mm thick (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both sides. The size of rail and stiles as per IS:1003 (Part I), Klin seasoned and chemically pressure treated complete all as specified and directed.

S & F factory made pressed steel frames size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and directed.

S & F factory made pressed steel frames size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and directed.

M & L for providing PCC 1:3:6 type B-0 using 12.50 mm graded stone aggregate as in filling pressed steel frame complete all as specified and directed.

S&F mild steel angle iron work as in doors frames complete all as specified and directed.

S&F factory made solid PVC door, cup board shutter 30mm thick (Style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded both side prelaminated PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & prelaminated PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail, lock rail & bottom rail panelling of prelaminated PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading & jointed together with solvent cement, supply & fixing in the frame at site as per SSR specification & diagram/product drawing shown in SSR Part II complete all as specified and directed by Engr-in-charge.

S&F factory made solid PVC door, cup board frame size 50mmx47mm made out of 5mm Prelaminated PVC sheet reinforced with MS square tube all as per specification and as per drawing shown in SSR Part II complete all as specified and directed by Engr-in-charge.

S&F Stainless steel butt hinges medium weight 100mm long complete all as specified and directed.

S & F butt hinges 100 mm size heavy weight cold rolled mild steel complete all as specified and directed

S & F mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

M&L for 150mm long extructed aluminium handle fabricated type complete all as specified and directed.

S&F Aluminium anodised barrel tower bolt of extruded section 150 mm size complete all as specified and directed.

S&F aluminium alloy anodised sliding door bolt with hasp and stapple ( bolt type) and fixing clips of sheet cast or extruded section with fixing bolts and sliding bolt of extruded section 300mm length & dia not less than 12mm with & including 6 Nos of bolts complete all as specified and directed.

M&L for Powder coated (Minimum thickness of powder coating shall be 50 micron) Anodised aluminium frames and shutters for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed by Engineer-in-Charge.

S&F 12mm thick high density fibre board pre-laminated on both sides (water proof) below & above middle/lock rail in powder coated aluminium doors and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc aluminium beads 20 mm size with and complete all as specified and directed by Engr-In- Charge

S&F 4.80 mm thick glass for aluminium windows including EPDM gasket to render the glazing, air and water tight etc and power coated aluminium beeds 20 mm size complete.

S&F stainless steel wire gauge 0.36 mm nominal dia of wire and average width of aperture 1.40mm to be fixed in Powder coated aluminium windows/ ventilators etc complete.

S&F stainless steel (304 grade) powder coated (Minimum thickness of powder coating shall be 50 micron) butt hinges 100mm complete all as specified and directed.

S&F powder coated (Minimum thickness of powder coating shall be 50 micron) aluiminium tower bolt 150mm long complete.

S&F powder coated (Minimum thickness of powder coating shall be 50 micron) aluminium handles(American type) 150mm complete.

S&F powder coated (Minimum thickness of powder coating shall be 50 micron) aluminium hook and eye of suitable length adjustable to aluminium window shutters complete all as specified and directed

S&F integrated lock for aluminium doors with 2 keys, complele all as specified and directed..

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads

M&L for Sheet glas 4mm thick ordinary quality and glazing with oil putty in square n exc 0.5sq. m in each pane complete all as specified and directed

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories)

S&F in repair 75 mm bore PVC (SWR ) PIPE in any length fixed to walls and floor with and including rubber ring joint and MS clamps made of FI 40x3mm and fixed complete all as specified and directed

S&F in repairs 110 mm bore PVC (SWR ) PIPE in any length fixed to walls and floor with and including rubber ring joint and MS clamps made of FI 40x3mm and fixed complete all as specified and directed

M&L PVC(SWR) bends 75 mm(any radius), diminishing pieces or tapers(larger bore measured) fixed in repairs complete all as specified and directed

M&L PVC(SWR) bends 110 mm(any radius), diminishing pieces or tapers(larger bore measured) fixed in repairs

M&L for repair of rolling shutter of hangers without taking down of existing shutter including replacement of roller/slider/any parts(roller/slider/any parts will be measured and paid separately) of shutter as well as greasing/oiling of shutter to make its function smooth, area of hangers exc 20Sqm complete all as specified and directed by Engr-in-charge Note: (i) Contractor shall take all necessary safety precautions alongwith insurance cover to his workmen before commencement of work. Unit rates quoted shall deemed to be inclusive of all such factors and nothing extra including compensation to workmen in any manner is payable on this account. (ii) Rate quoted by the tenderer deemed to be inclussive of all arrangements required for repairing, such as provision of cranes/scaffolding and any other T&P required; nothing extra will be payable on this account.

S&F in repair Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates confirming Fe-290(Gde E 165) complete all as specified and directed.

Dismantling wall and ceiling boarding of any description, thickness including cover fillets complete all as specified and directed.

M&L for prelaminated MDF board, exterior grade 18/19 mm thick phenol formaldehyde bonded, flat pressed and having choice lamination on one side and balancing white lamination on other side or both side white lamination fixed with screws, solvent cement/ adhesive to make kitchen/bed rooms cabinet sides top and bottom and shelves inside the cabinets complete as per manufacturer’s specifications complete all as specified and directed.

S&F D-type cabinet handles premium quality, stainless steel 304/gloss chrome/SN finished 200mm long matt finished complete fixed in position all as specified.

S&F ball catchers 304 grade stainless steel finished suitable for cabinets premium quality complete fixed in position as per manufacturer's instructions all as specified.

S&F Solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet used instead of plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing mention in SSR part II etc all as recommended by manufacturer complete all as specified and directed.

S&F Tee grid suspension system of size 600 mm x 600 mm type-1 made out of rolled framed hot dipped galvanised steel zince coated of not less than 120 gm/Sqm, main runner 0.3 mm thick of section 24 mm x 33 mm crross runner 0.30 mm thick of section 24 mm x 25 mm, wall angle shall be 0.63 mm thick of section 24 mm x 24 mm grid shall be suspended by 4 mm dia adjustable quick fit hanger rod, system exposed portion shall be pre painted polyester coated in off whitee/white in colour complete with material, fixing, jointing etc., with Coloured textured designer ceiling board 4mm thick of size 595 x 595 mm and laminated fixing with screws/clips complete all as per manufacturers instructions and complete all as specified and directed by Engr-in-charge.

Taking up or down existing steel tubing and connections, 15mm bore complete all as specified.

S&F 15mm bore steel water tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor ctc complete all as specified.

Cutting chases, pinning in, brick work making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting not exc 10 cm girth on brick walls complete all as specified and directed

Taking up or down existing steel tubing and connections, 20mm bore complete all as specified.

S&F 20mm bore steel water tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etc complete all as specified.

Dismantling of water tanks exc 250 & n exc 500 ltr capacity & removing to store all as directed by the Engr-in-Charge.

S&F Rotational moulded polythene water storage tank cylindrical vertical with closed top 500ltr capacity hoisted and fixed in position, connecting to inlet or outlet and washout complete all as specified and directed

S & F in repairs Gun-metal, globe or gate valves 20mm bore, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed

S&F in repairs Vitreous china squatting pan of Orissa patten size 580 x 440 white with (C I P trap long size) joint run and lead front or back inlet with integral footrest including connection to trap and to flushing pipe,anti- syphonage pipe, etc, fixed in repair complete and making good to floor in CM 1:3 all as directed and specified.

S&F in repair vitreous china premium/1st quality wash down water closet pan floor mounting (pedestal pattern/EWC) S/P trap white/ivory including connection to drain (or out going pipe) and to flushing pipe, antisyphonagee pipe,etc.,with flush pipe CP 32mm dia and incl. plastic seat cover as recommended by manufacturer closed pattern with flat bottom etc; and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and including supply and fix of PVC long arm S/P trap so that joint is avoided inside the building as well as in wall and outlet straight away come out of wall in all floors G.F.and taking down existing of any description/size complete all as specified and directed by Engr-in-Charge.

S&F in repairs low level flushing cistern of PVC 10 ltr capicity incl 45cm long PVC connection with brass nut at both ends, PVC flush pipe 32 mm bore and fixing as per manufacturers instruction incl taking down HL/LL flushing cistern and making good the disturbed surfaces in CM 1:3 complete all as specified and directed by Engr-in-Charge.

M&L for Providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over metal frame work and reinforced with G.I. wire mesh (Fillets, metal frame work and G.I. wire mesh paid separately) complete all as specified and directed by Engr-in-Charge.

All as item No. 85 above but including any sunk or raised moulding and curved edges, etc in ornamental intricate design complete all as specified and directed by Engr-in-Charge.

M&L Gl frame work for seamless ceiling with size of grid 605 x 605mm comprising of Gl perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit/ceiling at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (of any length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as per manufacurer instructions and as specified and directed by Engr-in-Charge.

Supply & Fix Vitreous China Urinal, half stall type, white including flat back ,white (min) with grating and union for discharge pipe including waste pipe etc. complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement complete all as specified and directed.

S&F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimumweight 60gms)

S&F in repair Vitreous china wash hand basin white flat back size 550 x 400 mm including PVC waste pipe 32 mm bore and CP Waste coupling with and incl a pair of suitable mild steel brackets, complete all as specified .

S&F in repair health faucet (ABS Body) with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S&F in repair PVC connection 600mm long of dia 15mm complete all as specified and directed.

S&F in repair stop cock /Angle cock 15mm cast copper alloy,screwed down, with chromium plated fancy type high pressure screwed both ends for iron pipe or for union complete all as specified and directed.

S&F in repair 15mm bore stop cock fancy type, chromium plated with long shank and cup (concealed type) screwed down, fancy type high pressure screwed both ends for iron pipe or for union complete all as specified and directed.

S&F in repair stainless steel grating 150x150 mm size square shaped with cockroach trap for floor trap fixed in position complete all as specified .

S&F in repair bib taps (long body) 15mm bore of cast copper alloy chromium plated fancy type, screwed for iron pipe or for brass ferrule & fixed complete all as specified and directed.

S&F in repair Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe 15 mm bore complete all as specified.

S & F central hole basin mixer with popup waste system and 450 mm long braided hoses, fancy type, cast copper alloy, with capstan heads, chrmium plated screwed down, high pressure with long screwed shanks and fly nuts, screwed for 15mm bore of iron pipe complete all as specified and directed by Engr-in-Charge.

S&F in repair stainless steel soap dish, complete all as directed.

S&F in repair 125mm size brass chromium plated shower rose fixing with 15mm dia pipe complete all as specified and directed.

S&F in repair 6mm thick looking mirror fixed to wall with stainless steel plugs/connecter/spacers/screws etc. chrome finish without any beading, including ends/edges of the mirror to be tapered etched smooth finish etc.complete fixed in position all as specified and directed.

S&F in repair tubular towel rail 20mm dia D type and 60cm long ,brass chromium plated complete all as specified and directed.

Dismantling, floor, hearth or wall tiling including CM (bedding (but not backing), removing serviceable tiles to store & rubbish off the premises complete all as specified and directed

M&L for single charge, vitrified, stain & scratch resistant, joint free, premium quality coloured tiles 600 X 600 mm and 8-10 mm thick, as in floors etc. in any pattern of light & dark tiles as approved, set and jointed and pointed in white or coloured cement to match, in floors etc. over & including 15 mm thick screed in cement mortar (1:6) over and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed.

All as per Item No 110 above but on vertical surfaces such as in skirting/dado etc and including 10 mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed.

M&L for ceramic glossy finish, joint free premium quality coloured tiles 600 X 300 mm and 8-9 mm thick, in any pattern of light & dark/highlighters tiles etc as approved, on vertical surfaces such as in skirting/dado etc, set and jointed in cement slurry over & including 10 mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed. Note : Dado should be flushed with the wall plastering.

M&L for anti-skid ceramic joint free premium quality coloured tiles 400 X 400 mm and 6-7 mm thick, as in floors etc. in any pattern of light & dark tiles as approved, set and jointed in neat cement slurry and pointed in white or coloured cement to match, in floors etc. over & including 15 mm thick screed bed in cement mortar (1:6) over and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specially provided for

M&L PCC type C-1 Mix 1:3:6 (20mm graded stone aggregate), 50mm thick in plinth protection/path finishing making the top surface even and smooth without using extra cement and joints filled with bituminous sealing compound grade 'A‘ complete all as specified and directed.

M&L hardcore of guage n.exc 63mm deposited spread and levelled in layers n.exc 15cm thick using broken stone complete all as specified and directed.

M&L for 25mm thick cement concrete type B- 0 1:2:4 (12.5mm graded agg ) as in flooring complete.

M&L machine cut Kota stone slab 18 to 20 mm thick as in flooring or treads of step incl half round moulding over and including screed bed 15 mm thick in CM (1:6) laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including cutting, rubbing and mirror polishing complete all as specified.

M&L machine cut Kota stone slab 18 to 20 mm thick as in riser to step including 10 mm thick rendring in CM (1:4) laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including cutting, rubbing and mirror polishing complete all as specified.

M&L for grinding and Mirror polishing on old surfaces of marble/ granite/Kota stone/ stone work where ever required to give high gloss finish complete all as specified and directed by Engr-in-charge.

M&L Baroda Green 15-17 mm thick (Table rubbed and polished) laid and jointed with grey cement slurry incl rubbing and polishing with granite finish over and including 15 mm thick CM 1:4 screed bed complete all as specified and directed.(Note: All exposed side of stone slab to be rounding)

ML for 18- 20 mm thick Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M&L for 75mm thhick PCC (1:4:8) type D2 using 40mm graded stone aggregate as in Sub base finished even and rough complete all as specified and directed.

M&L factory made rubber moulded coloured chequered tiles 30cm x 30cm x 22mm thick with grey cement and pigment, set jointed and pointed in neat cement slurry as in floor including 15 mm thick screed bed in 1:4 complete all as specified and directed.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 25mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed by Engr-in-Charge.

M&L for providing and Laying Premium (1st) quality straight edge, ceramic tiles WA value between 3% to 6% , flexural strength greater than 22N/mm², scratch resistance on mohs scale greater than 4 and crazing resistance of 2 cycles in area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floor, 8 to 10 mm thick in floors etc. in any shade and design/pattern of light & dark tiles etc as approved matching with wall tiles, set & jointed in neat cement slurry & pointed in matching colored polymer cement based grout to match including 15mm thick screed bed of CM 1:4 complete all as specified and directed by Engr-in-Charge.

Providing and laying factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed by Engr-in-Charge.

M&L for Repair to RCC sunshades, Chajjas, Balconies, Columns, bands, beams, roof slab and similar RCC work at any position / height( single storey/ double storey/ tripple storey) by dismantling loose/disintegrated portion and dubbing out with Cement Concrete 1:1½:3 type A0, 12.50mm graded stone aggregate to make up and finishing to required shape including 10 mm thick plastering in CM 1:4 including scaffolding upto tripple storey, complete all as specified and directed by Engr-in-Charge. Note : (i) Rate of scaffolding is deemed to be included in quoted rate (ii) If work lies at 10 mtr height as such the bidder is required to get workers insured.No claim will be entertained on A/C of any incident

Dismantling of brick or terracing tiles of single layers on roofs incl cleaning of bricks/tiles and removal of unusable bricks/tiles and removal from site, complete all as specified and as directed

Removing of Mud in roofs, any thickness, including plastering and leeping (whether full thicknes removed or only a part thereof)

Roughening surfaces of old concrete floor/roof by picking, sweeping clean and washing down with water to remove dust, etc. complete all as specified.

M&L for cement concrete 1:3:6 type C1 using 20 mm graded aggregate as in padding over roof, minimum thickness at khurra as 25 mm to maintain a slop of 1:100 complete all as specified and directed.

M&L for 10 mm thick rendering on top of roof in CM 1:3 incl mixed with WPC(WPC shall be paid separately)

M&L for wire brushing and cleaning top surface of tiles, lime terracing or cement concrete, including flashings and junction of parapets, etc. complete all as specified.

M&L for APP polymeric water proofing membrane minimum 3 mm thick and weighting not less than 3.6 Kg/Sqm black finish reinforced with non-woven polyster matt wt not less than 150 gms/Sqm with thermo fusable finish laid over compatible bitumen primer at the rate of 0.40 Ltr/Sqm torching over laps with a propane or a butan gas torch with a over lap of 75 mm at the side and 100 mm at the ends and sealing including applying a coat of cold emulsion bituminious primer all as per manufacturers instructions incl preparation of surface complete all as specified and directed.

S&F laying factory made, un-reinforced precast cement concrete tiles of size 250mm x 250mmx 22mm, machine pressed, as on roof surface, confirming to IS : 1237-1980, laid over and including 15mm thick screed bed in Cm 1:4, set jointed and pointed with grey cement slurry complete all as specified and directed.

Taking out existing drainage cover slab carefully and cleaning the drain including removal and deposited the earth where it is directed distance not exc 200m; placing all the cover slab as it is after cleaning the drain complete all as specified and directed by Engr-in-charge.

Demolition of Concrete is reinforced (reinforcement cut as required to facilitate demolition) of any description and in any position not otherwise specifically provided for complete all as specified and directed

M&L for providing precast reinforced cement concrete (1:2:4) type B1 (using 20mm graded stone aggregate) as in landings, perforated cover slabs(for manholes etc.,) chullah hoods, chajjas, water troughs, shelves and similar articles with plain faces set in cement mortar 1:4 all as specified and directed

M & F for 2.5 mm thick road marking with thermo plastic reflective paint including a sealing primer as recommended by manufacturer to be carried out to cement concrete pavement mechanically with hot application of material (painting material @ 5 Kg/Sqm) and glass beads @ 250 gm / Sqm confirming to CI No. 803.4 of MoRTH in strips of 100 / 150mm width on road surfaces complete all as specified and as directed.

S&F 32mm dia flexible corrugated PVC waste pipe of length 1 mtr complete all as specified.

SWAMI ENGINEERS (BID ID -3342455)

NORTON BUILDER (BID ID -3346737)

Arneja Builders (BID ID -3343192)

M/S RAJ KUMAR GUPTA (BID ID -3345110)

Jawandha Enterprises (BID ID -3355326)