Addn/Altn in Cum Spl Repair to MD Accn at Muzaffarpur under GE Danapur

Amount

Demolition of cement concrete (unreinforced) in ground floors and paving n exc 15 cm thickness (below or above ground level) all as directed

Dismantling of floor, walls, roof tiles including bedding but not backing and rubbish off permises complete all as directed.

Demolition of reinforcement cement concrete above the ground floor n exc 15 cm thickness (Reinforcement cut as required to facilitate demolition) such as cooking platform, chajjas etc complete all as directed

Joint free non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exc 0.18 sqm & not exceeding 0.38 sqm in floors etc set & jointed in neat cement slurry and pointed with white or coloured cement to match complete all as directed

Joint free non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exc 0.18 sqm & not exceeding 0.38 sqm as in skirting etc set & jointed in neat cement slurry and pointed with white or coloured cement to match complete all as directed

Non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exc 0.18 sqm & not exceeding 0.38 sqm in floors etc set & jointed in neat cement slurry and pointed with white or coloured cement to match complete all as directed.

Screed bed or bedding layer 15mm thick in CM (1:6) for laying of floor tiles complete all as directed.

25 mm thick cement concrete (1:2:4), type B-0, using 12.50 mm graded aggregate as in floors including finishing the surface rough & even for receiving kota stone/tiles complete all as directed

Glazed ceramics coloured tiles of size 450x350x7mm thick in vertical surfaces such as skirting/dados/wall, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces complete all as directed

10 mm thick plaster in cement mortar 1 : 4 for fixing of wall tiles complete all as directed.

Demolition of brick work built in cement mortar including all quions, arches, pillars, etc complete all as directed

Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as directed

Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar (1:4) in half brick thick wall.

Screed bed or bedding layer of cement mortar (1:4) 20mm thick for laying floors finishes complete all as directed.

Moulded, glossy, coloured chequered cement tile 20cm x 20cm x 25mm thick set jointed and pointed with grey cement slurry mixed with pigment to match the shade of the slab complete all as directed

PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) in foundation base, mass concrete & cinder concrete complete all as directed

PCC (1:2:4) type B1 using 20 mm graded stone aggregate for insertion of hold fast ,coping lintels ,plinth course, cills etc , including necessary form work complete all as directed.

Taking down cement plaster on wall/ceiling/roof etc including raking out joints, hacking for key scrubbing down with water complete all as directed.

15 mm thick rendering on fair faces of brick work/concrete surfaces in CM (1:6), finished even and smooth (without using extra cement ) complete all as directed.

Rendering 15 mm thick in cement mortar 1:4, in two layers (1st layer 10 mm thick rendering coat and 2nd layer 5 mm thick finishing coat) on brick work or concrete surfaces, second layer (finishing coat) mixed with liquid water proofing compound @ 200 ml / 50 Kg bag of cement as per manufacturer's instructions and finished the surfaces even and fair without using extra cement complete all as directed .Note : Liquid WPC shall be measured and paid separately

5 mm thick rendering on fair faces of brick /concrete surfaces as on ceiling in CM (1:3), finished even and smooth (without using extra cement ) complete all as directed.

Supply only water proofing compound (liquid), ISI marked complete all as directed

Anti termite treatment along the external wall below concrete or masonary apron using chemical emulsion @ 2.25 ltr per linear meter including drilling and plugging holes with cement mortar 1:2 (1 cement : 2 coarse sand )to match the existing floor complete all as directed

Antitermite treatment of soil under existing floors using emulsion @ one litre per hole ,300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement : 2 coarse sand )to match the existing floor complete all as directed

Taking down chowkats or frame with shutters of any description (without taking off shutters from the frames) n. exc 1.5 Sqm each complete all as directed

All as per above item No.25 but exc 1.5 Sqm but n.exc. 4 Sqm each.

Taking down shutter of any description n exc 1 sqm each and removing to store complete all as directed

35 mm thick 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc fitted to chowkhats for doors etc complete all as directed.

Factory made 35 mm thick plain, framed, panelled shutters (Two panels) with lock rail and panel of 9 mm thick commercial ply or 12 mm thick veneered particle board with commercial veneering on both faces and size of the members of shutter are as per IS – 1003 (Part – I) made of kiln seasoned & chemically pressure treated 2nd class hardwood rail and style complete all as directed.

30 mm thick flush shutters solid core construction with particle board core and plywood face panels, commercial type on both sides supplied and fitted to chowkhat complete all as directed

Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, with glazing bars, dovetailed or welded complete all as directed

All as per item No. 31 above but without glazing bar

Steel ventilators with top hung shutters including hinges, steel peg stay complete all as directed

Mild steel framed works such as grills,gratings,etc, with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work for portions framed and hung as gates, including pintle hinges, stops, hand made sliding bolts, etc conforming to Fe 290 Gde -E-165.complete all as directed

Pressed steel frame of size 105 X 60 mm and 1.25 mm thick MS sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates etc complete all as directed.

Pressed steel frame of size 125 X 60 mm and 1.25 mm thick MS sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates etc complete all as directed.

Mild steel works as in hold fasts, clamps, plain angle cleats for securing purlins to wood trusses or rafters, cooler stands and similar small articles conforming to Fe 410-0 or Fe 310-0 complete all as directed.

Solid PVC door frame of size 50mm x47mm made out of 5mm single side prelam PVC sheet used instead of plain colour PVC sheet & edges will be painted to match with prlam sheet, reinforced with MS square tube, supplying and fixing in opening as per specification and drawing

Factory Made Solid PVC Moulded Door Shutter with Particle Board Core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing

100 mm size butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21.complete all as directed

Aluminum alloy anodised sliding door bolts with hasp & staple & fixing clips of sheet cast extruded section & fixing bolts & sliding bolts of extruded section 300 mm long complete all as directed.

Mild steel, 150 mm long ordinary helical door spring incl roller and roller plate complete all as directed.

200 mm long aluminum anodised barrel tower bolts of extruded section complete all as directed

150 mm Aluminium anodised, barrel tower bolts of extruded section and fixed all as directed

100 mm Aluminium anodised, barrel tower bolts of extruded section and fixed all as directed

150 mm extruded aluminium alloy handles, fabricated type anodised complete all as directed

100 mm extruded aluminium alloy handles, fabricated type anodised complete all as directed

Floor door stopper 140 mm overall length of cover plate of aluminium alloy body and tongue, anodised. With hard drawn spring, fixed in floor. complete as directed.

Small fitings of 2nd class hard wood door, window stops and the like not exc 200 cucm each including MS butt hinges, medium weight, cold rolled 50mm long complete all as directed

GI wire cloth 0.56 mm nominal dia of wire and average width of aperture 1 mm and fixed with stainless steel wire staple complete all as directed

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames/steel frames glazed with oil putty or fixed with beads complete all as directed

3 mm thick sheet glass ordinary quality and glazing with oil putty in square n. exc 0.5 Sqm in each pane complete all as directed

3 mm thick frosted glass pin head type and glazing with oil putty in squares n exc 0.5 Sqm in each pane complete all as directed

18/19 mm thick Prelaminatd particle board, interior grade, (PLB-22)prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed in repair with screws to timber frame work complete all as directed.

100 mm long hasp & staple aluminium anodised wire type, incl bolt to hinge plate and fixed with screw complete all as directed.

100 mm dia extruded brass handle, fabricated type polished fixed to board complete all as directed.

MS Peg set of six stainless steel complete all as directed. Make: Hindware/Prayag/Cera

Mild steel conduit curtain rod with PVC coating fancy type curtain rod 20 mm dia of any colour as approved as in repair.complete all as directed.

Mild steel Bracket with PVC coating fancy type for curtain rod 20 mm dia of any colour as approved complete all as directed.

Taking up or down steel tubing and connections, including cleaning for re-fixing of 15 mm dia.

Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store of 20 mm dia.complete all as directed.

16 mm CPVC Pipes SDR 11 & plain CPVC SDR 11 fittings on walls /ceiling or laying in floors including union, brass elbow,brass tee, MBTA, FBTA complete all as directed

20 mm CPVC Pipes SDR 11 & plain CPVC SDR 11 fittings on walls /ceiling or laying in floors including union, brass elbow,brass tee, MBTA, FBTA complete all as directed

Cutting chases in brick walls, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as directed

Chromium plated central hole basin mixer regular type without popup waste system with 450 mm long braided hoses fixed in repair complete all as directed Make: Cat Part No G0214A1 of Parryware or equivalent of make as given in list of make.

Vitreous china WHB size 550mmx400 mm white flat back including pvc waste pipe but excluding taps, waste, chain & plug & porcelain stopper but including brackets with two coats of synthetic enamel painting over a coat of red oxide primer fixed in repair complete all as directed Make: Cat Part No C0406 of Parryware or equivalent of make as given in list of make

White vitreous china wash down water closet pan pedestal pattern (white) excluding flushing cistern and flush pipe as in repair complete all as directed.

Vitreous china squating pan 'Orissa' pattern WC size 580x440 mm white with integral foot rest and trap and including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor as in repair complete all as directed Make: Cat Part No C0117 of Parryware or equivalent of make as given in list of make

10 Ltr capacity PVC valveless shyphonic action type low level flushing cistern white with inlet, ball valve, float valve and handle incl bracket and flush pipe of low level of 32mm dia fixed to wall as in repair complete all as directed. Make: Cat Part No SLIM LINE E8090 of Parryware or equivalent of make as given in list of make

Chromium plated health foucet with 8mm dia and 1.2 m long flexible tubes and wall hook suitable for EWC including nut/washer as in repair complete all as directed. Make: Cat Part No T9875A1 of Parryware or equivalent of make as given in list of make

PVC connection 15mm dia size and 450 mm long with 2 Nos check nuts its washers complete all as directed as in repair.

Cabinet mirror, box type of size 19" x 21" of colour as approved fixed to wall complete all as directed. Make: Prayag/Shakti/Commander

Bib tap 15 mm bore, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule as in repair complete all as directed Make: Cat Part No G3004A1 of Parryware or equivalent of make as given in list of make

15 mm bore pillar taps cast copper alloy with capstan heads chromium plated screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks & fly-nuts screwed for iron pipe & fixed as in repair complete all as directed Make: Cat Part No G3002A1 of Parryware or equivalent of make as given in list of make

CP brass tubular towel rail 20 mm dia D type 60 cm long between flanges as in repair complete all as directed Make: Cat Part No T6401A1 of Parryware or equivalent of make as given in list of make

Aluminium anodised tubular towel rail 20 mm dia D type 60 cm long between flanges complete as in repair.

Angle cock 15 mm bore fancy type chromium plated, with capstan head, high pressure, screwed down, screwed for iron pipe or for brass ferrule fixed to iron pipe as in repair complete all as directed. Make: Cat Pat No G4607A1 of parry ware or equivalent of make as given in list of make

CP two way angle valve with wall flanges 15 mm bore, screwed down, screwed for iron pipe or for brass ferrule as in repair complete all as directed Make: Cat Part No G4643A1 of Parryware or equivalent of make as given in list of make

Stainless steel soap dish, of standard size and shape as in repair complete all as directed.

Kitchen Sinks with drainage board made of stainless steel 1 mm thick sheet, with plugs, washers and wastes, & waste pipe incl bedding in cement mortar to dwarf wall or incl fixing suitable sizes of cantilever brackets and connecting union to pipe overall size 915 x 460 mm, bowl size 410 x 330 x 160 mm complete all as directed.

KItchen Sinks without drainge board made of stainless steel 1mm thick sheet, with plugs, washers and wastes; & pvc waste pipe including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495 mm x 420 mm bowl size 410 mm x 330 mm x 160 mm complete all as directed.

0.63 mm thick kitchen plate rack made of stainless steel 900 x 750 x 220 mm size fixing with wooden plug with suitable size of screws as in repair.complete all as directed Make: Cat Part No P346 of Prayag or equivalent of make as given in list of make.

Chromium plated overhead shower rose swivel type 125 mm with CP arms 300 mm long as in repair.complete all as directed Make: Cat Part No T9808A1 of Parryware or equivalent of make as given in list of make.

Plastic water closet seat cover, Cream / white colour, closed pattern with flat bottom and cover and mild steel chromium plated aluminium hinging device for pedestral pattern WC as in repair. Cat Part No E-8307/E8306 of Parryware or equivalent of make as given in list of make

PVC (SWR) 'P' or 'S' trap for 110 mm dia pipe complete all as directed

Chromium plated toilet paper holder with flap as in repair complete all as directed.

RCC as in kitchen platform, shelves & chajjas etc type B1 (1:2:4) (20 mm graded stone aggregate) including necessary form work complete all as directed

16-18 mm thick granite slab (of any type) work (table rubbed and polished) in cooking platforms, steps, window cills, incl edge moulding & cutting holes for gas pipe through drill machine and laid over 15mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as directed.

Two coats of elastomeric cementatious coating Pidifin 2k of pidilite or equivalent in fosroc, sika, STP on exposed brick surface after complete removal of old plaster surface complete all as per manufacturer instruction and as directed.

TMT bar 8 dia & over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire not less than 0.90mm dia or securing with clips complete all as directed

Taking down AC/PVC pipes (including all fittings), with spigot and socket ends and lead joints including burning out joints of 100 mm dia pipe complete all as directed

PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints laid in floors, trenches complete all as directed

PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to wall complete all as directed.

PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints laid in floors, trenches complete all as directed.

Clamp made out of 50mmx5 mm flat iron, 16mm dia round iron stays including bolts & nuts and securing ends of stays to wall or roof for 110mm PVC pipe complete all as directed.

PVC(SWR) bend of 110mm dia of any radius complete all as directed

PVC (SWR) bends any radius provided with access door of 110 mm dia complete all as directed.

PVC(SWR) Tee of 110mm dia complete all as directed.

PVC (SWR) bends any radius provided with access door of 75 mm dia complete all as directed.

PVC (SWR) branch pieces, single (equal or un equal) , ordinary or inverted (spigot or socket type) or with parralled branches of 110 mm dia with access door complete all as directed.

Ditto all as per above item No.101 but 75 mm bore

PVC (SWR) vent cowl 110mm bore complete all as directed.

PVC (SWR) nahani/ floor trap, plain with grating with or without waste hole including jointing with solvent cement 75mm dia complete all as directed.

Dismantling water tanks and removing to store of capacity exc 500 and n exc 1000 ltrs complete all as directed.

Rotational moulded polyethylene water storage tanks in white colour tripple layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I of 1000 Ltr capacity complete all as directed.

Ball valves 20mm dia high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm-210gms) complete all as directed..

Gun metal, globe or gate valve with iron wheel head, 20 mm bore, screwed both ends for iron pipe as in repair complete all as directed..

Preparation of new wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (Ordinary tint) over a coat of primer complete all as directed.

Preparation of new steel surfaces any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red-oxide primer complete all as directed.

Removing old paints by paint removes or burning off by blow lamps and cleaning with scrapers, any number of coats,any width or girth complete all as directed.

Preparing old wooden surfaces exceeding 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as directed.

2mm thick wall care Putty in two layers on old wall surfaces including complete removal of existing wall finish of any type with wire brush, brooming, dusting and finally washing with water to clean the surface absolutely free from any kind of foreign materials and making good minor cracks etc. and surfaces absolutely even and smooth, rubbing with sand paper complete all as directed..

Preparation of newly plastered surfaces of wall & concrete and applying 2mm thick wall care putty including preparation of surface complete all as directed.

Two coats of oil bound distemper on wall or concrete over a coat of primer on prepared surfaces including, rubbing with sand paper on newly plastered surface complete all as directed.

1mm thick wall care Putty in one layer on old ceiling surfaces including complete removal of existing wall finish of any type with wire brush, brooming, dusting and finally washing with water to clean the surface absolutely free from any kind of foreign materials and making good minor cracks etc. and surfaces absolutely even and smooth, rubbing with sand paper complete all as directed..

Preparation of newly plastered surfaces of ceiling and applying 1mm thick wall care putty including preparation of new surface complete all as directed.

Two coats of oil bound distemper on ceiling over a coat of primer on prepared surfaces including, rubbing with sand paper complete all as directed.

Preparation of old decorated surfaces of walls by washing, rubbing down and scrapping of distemper surfaces and applying two coat of Oil Bound Distemper of any light shade complete all as directed.

Preparation of old decorated plastered or unplastered surfaces of wall by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coat of white wash complete all as directed.

Preparation of old surfaces of ceiling and applying two coats of oil bound distemper complete all as directed.

Preparation of new plastered or unplastered surfaces of wall and applying two coats of cement based paint over a coat of primer complete all as directed.

Preparing old painted surfaces of walls, chajjas etc by washing rubbing down and stopping and applying two coat of cement base paint white or tinted complete all as directed.

Preparing surface of sunken slab and applying 15 mm thick cement plaster 1:4 cement sand mortar with integral water proofing compound both on floor and wall. The surface shall then be cured and allowed to dry then applying Epoxy Resin coating polymer modified cementitious coating like brush bond of Fosroc, Pidilite and Bostic as per manufacturer's instructions both on floor as well as on wall and sunken floor shall be filled with graded cinder complete all as directed.

Water proofing treatment on "Non approachable / non accessible and approachable roof" surface (Horizontal & Vertical surfaces) in following sequence through manufacturer / authorized applicator of the manufacturer including taking down of existing roof treatment, properly cleaning & drying the concrete surfaces complete (i) Applying a coat of oxidised bitumen based solvent primer @ 0.4 lit / Sqm (ii) Applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 kg/ Sqm incl cleaning surfaces. (iii) Laying unrolled over the bitumen coated surface, polymeric water proofing membrane Hyperplas standard wt not less than 3.60 kg /Sqm with 100 mm over laps shall be sealed by flame as per manufacturers instruction. (iv) Applying two coats of bituminous aluminium paint including preparation complete

PCC (1:2:4) type B0 (Using 12.50 mm graded stone aggregate) in roof padding/kerbs/sunken slab etc complete all as directed,

10 mm thick rendering on roof surfaces/concrete surface in CM (1:4) complete.

Taking down carefully copper/aluminium point wiring (light, fan, switch, socket or power, Bell & Two way point) complete with fitting such as switches, sockets, ceiling rose, sketch light fittings etc, and making good the disturbed surface of walls and floors etc as directed.

Taking down old/unserviceable distribution board by disconnection of electric connection carefully SPN DBs/ TPN main switches including old unserviceable MCCBs /MCBs, isolators etc and making good to disturbed surfaces of walls complete as directed.

Taking down carefully copper / aluminium sub main wiring of any size from surface/concealed /existing conduit of any height and removing materials from site and making good disturbed surface of walls, floors, roofs etc complete all as directed.

Taking down ceiling fan/exhaust fan of any sweep after disconnecting all necessary electrical connections from ceiling rose to fan ,fan blades and deposit to MES store yard of AGE E/M Danapur complete all as directed.

Point wiring with PVC insulated PVC unsheathed electric FRLS cable 1100V grade single core having multi stranded copper conductor of size 1.5 Sqmm nominal cross sectional area in & including non metallic rigid PVC conduit ISI marked medium grade not less than 20mm dia with all conduit accessories in concealed wiring system by cutting of wall and making good disturbed surface of wall (cutting except on ceiling for fan point only, on ceiling instead of PVC conduit surface casing caping will be used) & 1.5 sqmm green PVC insulated unsheathed copper conductor as a earth wire connected to earth dolly by providing lugs including MS boxes for mounting switches, sockets, fan regulators for one light point controlled by one , one way switch 5 Amp complete all as directed

All as per item No. 132 above but one fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulators.

All as per item No. 132 above but one light point controlled by one , two way switch 5 Amp

All as per item No. 132 above but one 3 point 5 Amps socket out let point controlled by one switch on same board

All as per item No. 132 above but one 3 point 5 Amps socket out let point on independent board controlled by one switch.

All as per item No. 132 above but onebell point controlled by one bell Push

Description all as per item No 132 above but wiring with 2.5 sq mm single core multistranded copper conductor for one socket outlet 15/16 amps point on the on the indepandent board .

Switch piano type single pole one way 5 amp ,230 volt complete all as directed.

Switch Piano type single pole 15/16 amp, 230 Volts complete all as directed.

Switch piano type 2 way switch 5 amp ,230 volt complete all as directed.

Bell push 5 amps, 230 Volts, complete all as directed.

socket outlet 2 in 1, 5 amp , 5 pin 240 volt complete all as directed.

Socket outlet 2 in 1, 5 pin, 5 and 15 amp, 230 Volts complete all as directed at site.

Ceiling rose surface PVC / Poly carbonate 63.5mm dia three terminal, complete as directed.

stepped type electronic Fan regulator flush type complete all as directed. .

Lamp holder,PVC/ Polycarbonate type with back plate suitable for batten / slanting fittings complete all as directed.

Bell electric Ding dong type, suitable for operation on 230 volt 50HZ AC supply complete all as directed.

Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size 6 Sqmm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ Ivory colour and its accessories ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 6 sqmm (nominal area ) stranded copper conductor FRLS cable as earth wire complete all as directed. Note: Three runs of 6 sqmm cable with colour code as per IE rules and one run of PVC conduit will be measured as one unit.

Sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240volts double door with magnatic locking system including necessary provision for inserting the DB's in wall by cutting the brick /stone masonary etc and making good of disturbed surface to match with existing colour of wall complete all as directed.

MCB Single pole neutral rated capacity 6-32 Amps , 240 Volts breaking capacity 10 KA, 'C' curve complete all as directed.

MCB Single polel rated capacity 6-32 Amps , 240 Volts breaking capacity 10 KA 'C' curve complete all as directed.

Labour only for refixing the ceiling fan obtained from item no. 131 above with replacement of unserviceable 3 core PVC insulated PVC sheathed 3 core multistranded copper conductor cable of size 23/0.193 from ceiling rose to fan terminal including over hauliling the fan , painting of ceiling fans complete with two coats of synthetic enamel paint by spraying including filling cavities with filler after cleaning all dust etc complete all as directed.

Highly efficient LED Bulbs , 10 W, direct fit lamp, in B-22 cap of complete all as directed.

Decorative wall mounted luminaire made out of polycarbonate with unbreakable globe suitable for LED bulb in and including LED Bulbs 10 watts complete all as specified and as directed. Make- Havells Cat no LHDLO6160099 or its equivalent in Philiips, Bajaj.

LED 9/10 watts batten aluminium extruded with decorative end caps complete all as specified and as directed. Make- Bajaj Cat Part no BCLSB 10 NW or its equivalent model in Wipro, Philips.

Energy saving new generation 10 Watts LED Bulk head fitting IP 65 luminaire with opel diffuser prewired with warranty option of 5 years from date of installation and necessary mounting arrangements , provision of new 3 core multistranded copper conductor of size 23/0. 193 from ceiling rose to fitting complete all as directed. Make Bajaj Cat no. BIBWP 10 W LED or its equivalent in Philips , Wipro.

Wall mounted LED tubelight fitting 20 Watts batten for surface mounted anodized extruded aluminium housing ,high transmissitivity diffuser , high lumen output box type fitting , 230 volts and integrated electronic driver connector block etc with warranty option of 5 years from date of installation complete with all accessories internally prewired and necessary mounting arrangements provision of new 3 core multistranded copper conductor of size 23/0. 193 from ceiling rose to fitting complete all as directed. (Make- Bajaj Cat part No. BCLAB 20W WH LED P , Wipro Cat partNo. LL20-281-XXX065- ALI or its equivalent in Phillips, Havells).

Energy saving new generation enviournment friendly long life versatile presure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 25 Watts with pre wired and necessary mounting arrangements and provisions of 2.5 sqmm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps , nut , volts complete all as directed. (Make Bajaj Cat part no. ENXT P 24L WH CR PC SD (Edge plus series) or its equivalent in Phillips, Wipro, Havells).

Energy efficient exhaust fan of 230mm sweep made of metal body complete with louver with bolts nuts and washers size of the bolts 15 cm long 12mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/0.0076 two core from ceiling rose to exhaust fan for connection and making suitable size of hole to existing brick wall for fan base complete all as directed. (Note- cost of suitable opening wall for fixing exhaust fan is deemed to be included in overall rates quoted.)

Water heater storage type (Gyser) verticle /Horizontal type as per site requirement with inner container of capacity 25 ltrs , electrically operated , AC 230 Volts , BEE 5 star rated ISI marked including 04 nos. of hold fastener nuts required suitable size fixed in brick wall PVC connection pipe hot & cold complete all as directed.

Earthing complete with galvanised steel earth plate electrode 600mm X 600 mm X6mm thick burried directly in ground vertically (earth plate not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level ) connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts check nuts and washers of galvanised iron or steel inclu 15mm dia medium grade protection pipe for earth lead complete with charcoal and common salt including watering arrangements with galvanised iron pipe light grade20mm dia, PCC Chamber , CI frame and cover, MS funnel with wire mesh all as shown in electrical plate no 3 of SSR Part I including excavation and earthwork in any type of soil /strata and testing on completion . Note:- GI earth wire 4 mm dia and 15mm dia protection pipe upto 7.5m from earth plate is deemed to be included in rate quoted.

MITHILA BUILDERS AND ENGINEERS

SHARDA CONSTRUCTIONS

M/S SWASTIK HI-TECH BUILDERS PVT LTD

Associated Engineers

L G BUILDERS

Vp sanjiv