ADDN/ALTN AND SPL REPAIR TO BOUNDARY WALL, PROVN OF UG SUMP CERTAIN MINOR AND REVENUE WORK UNDER GE(NW) BHANDUP

Amount

M&L for excavating over area n exc 1.5m depth getting out soft / disintregrating rock complete all as spd and directed.

M&L for excavating over area exc 1.5m depth and getting out soft/ disintregrating rock complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm all as specified and directed.

Removing excavated material exc. 250 m but n exc. 500 m and depositing where directed

Removing Excavated material ( soft/loose soils) not exceeding 50 M and depositing where directed at a level not exceeding 1.5 M above the starting point, complete all as specified and directed.

M & L for Hardcore of guage exc 63mm broken stone or boulders but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface all as specified and directed.

M & L for Hardcore of gauge n exc. 63 mm, broken stone or boulders deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface all as specified and directed.

M & L for Sand filling under floors or in foundations including watering and consolidation all as specified and directed.

M & L for Polythene film, 50 micron thick, laid on a coat of bitumen primer, @ 0.30 to 0.50kg per sq. M all as specified and directed.

M&L for PCC 1:3:6 ( using 40mm graded stone aggregate)as in foundation and mass concrete all as specified and directed.

M&L for RCC (Design mix) M30 (using 20mm graded aggregate) in foundation, including rafts, basement slabs, foundation beams all as specified and directed.

M&L for RCC (Design mix) M30 (using 20mm graded aggregate) in walls, basement walls any thickness above top of footing all as specified and directed.

M&L for RCC(Design mix) M30 (using 20mm graded aggregate) in columns, pillars, piers, posts and struts all as specified and directed.

M&L for RCC (Design mix) M30 (using 20mm graded aggregate) in beams , cantilevers, bressummers, lintels over 1.5m span. all as specified and directed.

M&L for RCC (Design mix) M30 (using 20mm graded aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs in shelves and the like all as specified and directed.

Mild steel TMT bars epoxy coated 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed.

All as per item no 16 here-in-above but 6mm to 8mm dia all as specified and directed.

M&L for formwork to sides of concrete foundations, footings, bases all as specified and directed.

M&L for formwork to sides of pillars, posts, struts, piers, columns all as specified and directed.

M&L for formwork to faces of walls, retaining walls, abutments all as specified and directed.

M&L for formwork to soffits of suspended slabs such as roof slabs all as specified and directed.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etcM&L for formwork to sides of soffits of lintels for rough finished all as specified and directed.

Form work to edges of concrete as in windows cills, lintel etc for fair finished of surfaces complete all as specified and directed.

S&F for cast iron work grade FG 150 unmachined in brackets manhole cover ec 5kg each

S&F framed work such as grill grating , framed rangs etc all as spd conforming to Fe- 290.

S & F in repair 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to wall complete all as specified and directed.

S & F Mild steel work of framed brackets of Angles and ladder of watertanks and similar work flats cut to shape ,drilled and countersunk for screw, as in supports for stiffening of fencing, grating of open drain and including bending ,welding angles as necessary similar works confirming to Fe 290 or Gde-E165 and complete all as specifed and directed. .

M&L for rendering 15 mm thick in CM (1:6) on brick walls finishing even and smooth without using extra cement etc complete all as specified and directed by EIC.

M&L 75 mm thick cement concrete type C-1, 1:3:6 (20 mm graded stone aggregate) as in plinth protection, path complete all as spd and directed.

Demolition of brick work or stone boulders masonary built in cement mortar including all quoins, arches, pillars etc complete.

M & L for Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar (1:6)

All as per si item No-31 here-in-before above but except stones

M&L for PCC (1:3:6) type C-1 (using 20 mm graded stone aggregate) as in plinth courses, strings courses, copings, kneelars, apex stones, bed plates, kerbs etc complete including necessary formwork all as specified and directed

M & L for Keyed pointing to random or polygonal rubble, uncoursed or brought upto course in cement mortar (1:3) all as specified and directed.

S&F Angle iron in fencing posts, struts etc. made to shaps drilling holes cutting, notches fixing in concrete etc complete all as specified and directed

M&L for Broken glass coping on top of walls in Cement Mortar (1:3)

S&F razor type concertina fencing coil 9 SWG hot galvanized spring tensile wire 145 to 150 newton per sqm mm zinc coating 250-300 gram per sqm dia of coil when unstreched 610 mm, minimum number of coils 10 per running metre after laying hot dip galvanized razor ribbon type of size 0.50mm thick 19mm wide before wrapping central core wire fixed with 1.66mm thick gi clips 25 nos per running metre and special nut bolts hold Z coils together and extra two rows parallel wire of 10 gauge complete all as specified and directed.

M&L for new surfaces of wall and applying two coats of cement base paint over one coat primer etc complete all as specified and directed.

Dismantling mild steel work of any description.

M & L for providing & fixing of FRP chajja of approved make & colour, surfaces should be Mangalore clay tile design (the FRP chajjas to be moulded in gel coat finish, thickness to be 2.00 mm to 2.5 mm and back patti to be additionally reinforced with core matt, all resins and pigment to be fully weatherable and UV established, core matt to be used with GSM for extra thickness, necessary FRP covered metal, fixing the chajjas in position that required level with necessary scaffolding and working platform including providing 8 mm dia MS bolt 125 mm long spacing not more than 45 cm suitable anchor fasters in the holes drilled in the wall RCC members to hold the chajjas in position etc, filling the gaps with poly sulphide seal and complete all as specified and directed. Make - M/s Titan Enterprises / Advance FRP / Sintex. Note - 7 cm vertical drop shall be provided in front side of chajja as well as both sides of chajja. For payment, top area of chajjas shall be measured and paid. Rates quoted by the tenderer shall deemed to be included for said provision.

M&L for framed work using MS Angle iron, rectangular hollow sections, solid sq bars, Flat iron, MS channel sections, or hollow structural tubesetc incl necessary cutting& bending to shape & welding together complete as in gates, cattle traps, over head trusses, gantries complete all as specifie and directed.

M & L preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer n.exc 10cm in width or girth,not otherwise described complete all as specified

M&L preparation of new steel surfaces of any description not otherwise described over 10 cm in width or girth & painted with two coats of synthetic enamel paint over a coat of red oxide primer.

Supply & fixed aluminium wire cloth 0.45mm nominal dia of wire and average width of aperature 1.40mm for wooden / iron frame, complete all as specified and directed.

M & L for PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) cement concrete as in bed blocks etc for hold fasts etc including provision of necessary form work, complete all as specified and directed.

M&L for Precast cement concrete 1:2:4, type B1 (Using 20 mm graded granite stone aggregate) as in cover slabs for drain set in cement mortar (1:6) including form work, complete all as specified and directed.

S & F TMT bars to 8 mm dia cut to length bent to shape required including cranking bending spirally hooking ends and binding with MS wire of dia not less 0.9 mm complete all as specified

S & F Mild steel deformed bars 6mm to 8mm dia cut to lenth bent to shape required including binding with M.S. wire (annealed) n less than 0.9 mm dia complete all as specified

M&L for 100 mm thick cement concrete type C2, (1:3:6) (using 40 mm graded stone aggregate) in sub floors, sub-bases etc for receiving the toping layer finish the surface even & rough, complete all as specified and directed.

M&L for 100 mm thick cement concrete type B2, (1:2:4) (using 40 mm graded stone aggregate) in toping layer, finish the surface even & smooth without using extra cement complete all as specified and directed.

Forming contraction (Dummy) joint 100 mm deep x 10 mm wide filled with sealing compound grade "A"

M&L for preparation of new steel surfaces and applying Two coats of synthetic enamel paint over one coat of red oxide paint complete as specified.

M&L for rendering 15 mm thick in CM (1:6) on brick walls finishing even and smooth without using extra cement etc complete all as specified and directed by EIC.

M & L for preparation of new plastered surfaces of wall and applying two coats of 100% anti fungal acrylic exterior emulsion paint over one coat of primer all as per manufacturer's instructions including necessary scaffoldings etc complete all as specified and directed.

Super Construction

LUCKY DECOR