Replacement of 30HP Multi Stage Centrifugal Pumps and allied accessories at Laitkor.

Taking out old unserviceable/ vintage 30HP Capacity multi stage centrifugal pump with connected items all as specified and directed by Engr-In-Charge.

Supply, installed testing and commissoning of 30HP Capacity multi stage centrifugal pump set 3phase, 415Volt 50Hz, Pump head 167Mtrs Speed of RPM 2900, Pump inlet 65mm dia and outlet 50mm dia , with PCC base foundation complete all as specified and directed by Engr-In-Charge. Make : Kirloskar / CG/ Marathan

Providing and fixing G.I. pipes of 80mm dia complete with G.I. fittings including trenching and refilling and takingout of old unsv pipe with complete all as specified and directed by Engr-in-Charge. Make : Jindal/Tata steel /Surya/BSTor ISI Marked approved by Accepting Offrs.

Supply and fixing of Cast Iron Non Rising Sluice Valve 80mm dia PN 10 Rating Flanged End As Per IS : 14846 Body,Dome,Wedge- CI IS:210, Gr. FG260 Body & Wedge Rings- Bronze IS:318 Gr. LTB2 Spindle- SS IS:6603, Gr.12Cr12 Gland Packing- Greasy Jute Packing Fasteners- CS IS:1367, CL-4.6/4.0 Gasket Natural Rubber Flange Drilling - IS:1538,Make : Kirloskar/Kartar/RMCO or ISI Approved By Accepting Offrs

Supply and fixing of C. I. Swing Type Non Return Valve Flanged End 80mm dia As Per IS : 5312 Body,Cover- CI IS:210, Gr. FG260 Door- CI IS:210, Gr.FG260 Body Ring- Bronze IS:318 Gr. LTB2 Door Face- Natural Rubber Hinge Pin- SS ASTM A276 Type 410 Fasteners- CS IS:1367, CL-4.6/4.0 Gasket- Natural Rubber Flange Drilling - IS:1538, ,Make : Kirloskar/Kartar/RMCO or ISI Approved By Accepting Offrs

Supply and fixing of Cast Iron Foot Valve Flanged End 80mm dia IS 4038 PN 0.2 Housing – Cast Iron is 210 Gr FG200 , Strainer – Cast Iron IS 210 Gr FG 200 , Door – Cast Iron IS 210 Gr FG 200 , Door Plate – Cast Iron IS 210 FG 200 for 200 mm size MS IS: 2062 Gr E 250 A for 200 mm and above size, Door Face Natural Rubber , Hinge Pin (for 200mm ot 450 mm ) SS 410 Fastners – CS IS:1367, CL-4.6/4.0 Flange Drilling IS:1538 T. Make : Kirloskar/Kartar/RMCO or ISI Approved By Accepting Offrs

Supply and fixing testing and commissioning of fully automatic Star-Delta Starter 35HP Capacity contractor Size-26KW, Overload relay range 28A-40A , 415Volt, 50Hz with complete required items all as specified and directed by Engr-In-Charge.

M&L for decoupling pump from motor, taking out impellor, bush, bearing shaft, stuffing box, reassembling the same after replacing the defective parts & carrying out the necessary repair, remetalling, turning, polishing the pump shaft, replacement of steel studs and unserviceable nuts & bolt and testing complete all as directed for the following capacity of pump sets. (a) Above 20 HP and upto 30 HP

(b) Above 10 HP and upto 20 HP

(c) Above 5 HP and upto 10 HP

Material and labour rewinding of burnt out 3phase motor taking out winding wire carefully without damaging the stator, cleaning the slot, rewinding the stator with super enameled copper winding wire of existing gauge along with insulating material, greasing varnishing the bearing including testing complete all as specified and as directed for the following capacity of motor :- (a) Above 20 HP and upto 30 HP

(b) Above 10 HP and upto 20 HP

(c) Above 5 HP and upto 10 HP

Material and labour for taking out submersible pump set from bore well with the help of chain pulley and tripod , lowering in the same bore well complete all as specified and directed by Engr-in-charge.

Material and labour rewinding of burnt out submersible pump motor with super quality copper winding wire of required gauge insulation with insulating material, drying, varnishing etc, and testing complete all as specified and directed for submersible pump set up to 10HP

Material and labour rewinding of burnt out submersible pump motor with super quality copper winding wire of required gauge insulation with insulating material, drying, varnishing etc, and testing complete all as specified and directed for submersible pump set above 10 hp 20HP

Material and labour rewinding of burnt out open well submersible pump motor with super quality copper winding wire of required gauge insulation with insulating material, drying, varnishing etc, and testing complete all as specified and directed for submersible pump set up to 10HP complete.

Servicing of RO Plant1000LPH capacity with using of Descalent chemical circulating the plant with complete all as specified and directed by engr-in-Charge.

Replancement of RO Membrane 4040 Solid Filter Cartridge for RO of capacity 1000 LPH plant with complete all as specified and directed by engr-in-Charge.

Replacement of Micron Filter 20''x4''

Replacement of Dosing Pump

Replacement of Rotameter R 2400LPH(Inflow)(3/4'')

Replacement of UV System (2000LPH)

Replacement of Slim Housing (20''x2'')

Replacement of Slim Spun (20''x2'')

RANJIT KUMAR

M/S DESIGNS 4 YOU