SPL REPAIR TO BLDG NO P20 OR MD ACCN OF BIKRAM ENCLAVE AND PROVN OF CAR PARKING SHED NEAR BLDG NO T01 AT BIKRAM PARK UNDER GE SOUTH UDHAMPUR

Amount

Demolition of reinforced cement concrete in roof floor (other than ground floors) beams staircase, landing chajja and similar work complete all as specified.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified.

M&L for Glazed Coloured Ceramic tiles in vertical surface 450x300x7mm thick incl laid over 10 mm thick rendering in CM 1:4, set and joint in neat cement slurry and pointed in white or colour cement to match complete all as specified.

M&L for Non skid Ceramic coloured tiles (square/rectengular) 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm 10mm thick screed bed in cement mortar 1:4 for laying floor finishes under floo etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface complete all as specified.

M&L for Non skid Ceramic coloured tiles (square/rectengular) 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floor etc incl 10mm thick screed bed in cement mortar 1:4 for laying floor finishes under floo etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface, complete all as specified.

All as per item No. 6 above but on vertical surfaces as in skirting incl laid over 10 mm thick rendering in CM 1:4, complete all as specified.

M&L for 25mm thick cement concrete 1:2:4 type B-0 using 12.5mm graded crushed stone aggregates as in floor and finished even and fair complete all as specified.

M&L for Machine cut kota stone slab flooring 20-25 mm thick over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete including 20mm thick screed bed in CM 1:3 complete all as specified.

Chromium plated toilet paper holder in repair complete all as specified and directed. Make : Jaquar Cat Part No ACN 1153N and equivalent in CERA.

M&L for granite 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms (in one piece) and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with granite shade and including 20mm thick screed bed in CM 1:3, complete all as specified.

Moulding of Granite/Kota stone full round moulding complete all as specified.

Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water, complete all as specified.

M&L for Rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement including mixing integral water proofing compound in the proportion as mentioned in manufacturer's instructions, complete all as specified.

M&L for Rendering 10mm thick on fair faces of brick work or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement, complete all as specified.

M&L for Rendering 5mm thick on brick or concrete surface as in ceiling in cement mortar 1:4 finished even and smooth without using extra cement, complete all as specified.

Supply only liquid integral water proofing compound, complete all as specified and directed by Engineer-in Charge.

Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.50 Square Metre each, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt), complete all as specified and directed by Engineer-in Charge.

Taking down chowkats or frames with shutters (without taking off shutters from frames) area exceeding 1.50 square metre and not exceeding 4.0 square metre each, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.), all as specified and directed by Engineer-in Charge.

Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 50 x100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra, complete all as specified and directed by Engineer-in Charge. payment on this account shall be made.

Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 65 x125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type wire mesh door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)

S&F 18/19mm thick ISI, termite proof , chemically well pressed, prelaminated particle board exterior grade prelaminated, one side with decorative choice lamination and other side balancing white lamination fixed with screws to frame work for kitchen cabinetstand cup boards etc includimg 6mm th teak wood beading all around complete all as specified and directed by Engineer-in Charge. Make;- Win Tuff or its equevelent

S & F pre laminated 18mm thick lead free factory made 100% solid WPC (wood polymer composite) sheet having high natural fiber conter 25 to 30% wood colour sheets with density not less than 500 kg/cum and the weight of sheet of 1 Sqm should be 11 kg (+/- 5%) manufactured by ISO 9001-2015 certified company. the sheet should be 100% water proof, ermite proof, fire ratardant, manufacured by single layer extrusion process with exellent screw holding capacity and shore D hardnes, compete as per direction by Engr-in-Charge.

S&F steel window (box type) factory made with side hung shutters including pintol hinges, steel handles, steel peg stay and all locking arrangement complete with glazing bars dovetailed or welded including one shop coat of red oxide primer complete all as specified and directed by Engineer-in Charge. Note : i) The window shall be fabricated as per Drg No CEUZ/TD/1269/2008 Sheet 1/3 to 3/3 ii) MS fillets, glazing, wire gauge shall be measured and paid separately.

Description all as per item as above here in before but without glazing bar complete all as specified and directed by Engineer-in Charge. Note : i) The window shall be fabricated as per Drg No CEUZ/TD/1269/2008 Sheet 1/3 to 3/3 ii) MS fillets, glazing, wire gauge shall be measured and paid separately

S&F factory made mild steel ventilators box type with upper top hung shutters and bottom fixed type shutters including pintol hinges,steel peg stay and one shop coat of red oxide primer complete all as specified and directed by Engineer-in Charge. Note : i) The window shall be fabricated as per Drg No CEUZ/TD/1302/2009 Sheet 1/3 to 3/3 ii) MS fillets, glazing, wire gauge shall be measured and paid separately

Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors; ladder; framed balusters; railing;frame work for water tanks and similar work conforming to Fe 290 Gd E-165 complete all as specified and directed by Engineer-in Charge.

S&F 4mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed by Engineer-in Charge.

S&F 4mm thick sheet glass frosted ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed by Engineer-in Charge.

S&F stainless steel wire cloth 0.36mm nominal and average width of apreture 1.40mm and fixed with tinned teaks or wire staple complete all as specified and directed by Engineer-in Charge.

M&L for plain, solid, straight chowkats and frames of 2nd class Hard wood, wrought, framed rebated on the soild, rounded or chamfered, put together with glue pinned at joints, supplied and fixed, complete all as specified and directed by Engineer-in Charge.

Demolition of brick/stone masonry built in CM, complete all as specified and directed by Engineer-in Charge.

M&L brick work with sub class B bricks straight or curved on plan to any radius built in CM 1:6 all as specified.

M&L brick work with sub class B bricks straight or curved on plan to any radius built in CM 1:6 but except bricks, complete all as specified and directed by Engineer-in Charge.

M&L Providing cement concrete in steps, seismic and other similar bands, parapets and railings up to 60 cm in hieght, coping, kneeless apex stones , bed plates, kerbs not provided for including weathering, slightly rounded or chamfered angles all as directed, 1:2:4 mix type B-0 complete all as specified and directed by Engineer-in Charge.

Roughing surfaces of old conc surfaces by picking up , sweeping,cleaning and washing down with water to remove dust etc including taking down tarfelt and brushing neat cement slurry @3kg/Sqm including 20mm thick screeding in CM (1:4) finished even and smooth, complete all as specified and directed by Engineer-in Charge.

M&L Applying bituminous primer on roof surfaces @ 0.40 ltr/Sqm and applying one coat of hot blown bitumen of grade 85/25 @ 1.20 Kg/Sqm and laying polymeric water proofing membrane 3 Kg/Sqm and bonded completely to the surfaces with overlap of 10 cms (overlaps to be thermo fused by flame) and applying one coat of hot blown bitumen 85/25 @ 0.70 Kg/Sqm complete all as specified and directed by Engineer-in Charge. Make: STP/IWL

M&L for providing 75mm thick cement concrete 1:3:6 type C-2 using 40 mm graded crushed stone aggregates as in plinth protection finished even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified and directed by Engineer-in Charge.

S&F stainless steel sliding door bolt plate type 250 mm long stove enamelled black with bright bolt not less 12 mm dia bolt with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate, complete all as specified .

S&F continuous M S CP piano type hinges 30mm flap (when opened ), bright finish or electrogalvanised complete all as specified.

S&F mild steel aluminium handle, oval type, stove enamelled black 150 mm long complete all as specified.

S&F 100mm size hasp and staple safty type stainless steel hinges pin including bolt to hinge plate and fixed with screw complete all as specified.

S&F for 150mm size stainless steel barrel tower bolt of extruded section and fixed.all as specified and directed.

S&F stainless steel barrel tower bolts, stove enamelled black, with bright bolt 200mm long. all as specified.

S&F Second class hard wood small fittings such as brackets of any type, shaped door and window stops and the like including all necessary Labour; articles not exceeding 200 Cu.Cm each, complete all as specified and directed by Engineer-in Charge.

Supply and fixing of stainless steel butt hinges medium weight 100 mm log fixed to steel /angle iron frame by welding, if required complete all as specified and directed by Engineer-in Charge.

All as per ser item No 50 above but 75mm, complete all as specified and directed by Engineer-in Charge.

S&F 300mm mild steel ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified and directed by Engineer-in Charge.

S&F in repair curtain rod of stainless steel 25mm dia with brackets, stops, end bulbs, rollers etc complete all as specified and directed.

S&F in repair vitreous China wash basin, white, flat back, size 550x400mm excluding tap, chain, plug but including brackets, waste fitting 32mm dia, brass chromimium plated for glazed ware sink, basin,with long screwed shanks and fly nuts flange end bedded in red lead cement and other end fixed complete all as specified.

M&L for PCC 1:2:4 type B1 using 20mm graded aggregate as in PCC filling in hold fast and similar work complete all as specified and as directed.

M&L for preparation of steel and iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over a coat of primer. all as specified.

M&L for applying one coat of wall putty on walls to give uniform surface complete all as specified and directed.

M&L for applying two coats of white washing on ceiling including preparation of old plastered surfaces complete all as specified.

M&L for applying two coats of white washing on ceiling including preparation of new plastered surfaces complete all as specified.

M&L two coats of oil bound distemper on walls including preparation on new surfaces over a coat of primer complete all as specified and directed.

M&L two coats of cement cement base paint on walls including preparation on new surfaces complete all as specified and directed.

M&L for two coats of weather proof exterior emulsion paint over a coat of primer including preparation of new plastered surfaces of any description complete all as specified.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern flush pipe) incl seat cover complete all as specified.

Health faucet ABS body with wall hook and 1 mtr chrome plated PVC hose pipe in repair complete all as specified and directed. Make : CERA Cat Part No F8030103 and equivalent .

Chromium plated toilet paper holder in repair complete all as specified and directed. Make : Jaquar Cat Part No ACN 1153N and equivalent in CERA.

Supply only cast iron 'P' or 'S' trap 100mm dia, complete all as specified and directed by Engineer-in Charge.

Supply only cast iron flush pipe 600mm long of 32 mm dia for low level cistern complete all as specified and directed by Engineer-in Charge.

S&F 10 ltr capacity PVC valveless, syphonic action type flushing cistern low level white with inlet, ball valve, float and handle including connetion to pipe but fixed in repair complete all as specified,

S&F C P brass magic eye in main door as per sample, complete all as specified and directed by Engineer-in Charge.

S&F stainless steel peg set of six as per sample, complete all as specified and directed by Engineer-in Charge.

S&F plate rack made of stainless stee, 600 x 750X0.55mm including fixing as per manufacturers instruction. all as specified.

S&F in repairs 600mm long brass chromium plated towel rail fancey type complete all as specified and directed by Engineer-in Charge. Make: Jaquar Cat No ACN-1111NM and equivalent in CERA.

S&F PVC connection 15mm size with PTMT nuts of lengh 450mm complete all as specified.

S&F sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar including fixing cantilever brackets connecting union to pipe and 32mm dia GI pipe duly painted upto Nihani Trap or Floor trap complete as directed at site, overall size 495mmx420mm bowl size 410mm x 330mm x160mm. all as specified.

M&L PCC 1: 5 : 10 type E2 using 40 mm graded brick aggregate as in filling under sunken floors/foundation etc complete all as specified.

Dismantling cast iron pipe & reinforced concrete drain pipes, jointed in cement mortar of any dia upto 100mm. all as specified.

S&F PVC (SWR) pipes 110mm bore single socketed , in any length with rubber ring joints fixed to wall complete all as specified.

S&F PVC (SWR) pipes 75mm bore single socketed , in any length with rubber ring joints fixed to wall complete all as specified.

S&F PVC (SWR) branch piece 110mm bore, single (single Y) equal or unequal, complete all as specified and directed by Engineer-in Charge.

S&F PVC (SWR) junction single 110mm bore, (Single T) equal or unequal with access door, complete all as specified and directed by Engineer-in Charge.

S&F PVC (SWR) junction single 75mm bore,(Single T) equal or unequal, complete all as specified and directed by Engineer-in Charge.

S&F PVC (SWR) bend any radius for upto 110mm bore pipe, complete all as specified and directed by Engineer-in Charge.

S&F PVC (SWR) vent cowl 110mm bore pipe, complete all as specified and directed by Engineer-in Charge.

S&F PVC (SWR) vent cowl 75mm bore pipe, complete all as specified and directed by Engineer-in Charge.

S&F PVC (SWR) reducers 110mm bore pipe, complete all as specified and directed by Engineer-in Charge.

PVC (SWR) couplers 110mm bore pipe, complete all as specified and directed by Engineer-in Charge.

PVC (SWR) couplers 75mm bore pipe, complete all as specified and directed by Engineer-in Charge.

S&F PVC (SWR) Floor trap, 75 mm dia of outlet, plain with grating including jointing with solvent cement all as directed.

S&F Stack clamps made out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 100/110mm bore pipe.complete all as specifiecd and directed.

S&F Stack clamps made out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 75 mm bore complete all as specified.

S&F in repairs soap dish , complete all as specified and directed by Engineer-in Charge.

S&F in repairs towel rack, complete all as specified and directed by Engineer-in Charge. Make Jaquar CAT NO ACN 1181FN

S&F in repairs Corner Glass shelf with chromium plated guard rails, complete all as specified and directed by Engineer-in Charge. Make Jaquar Cat No ACN-1171N and equivalent in CERA.

S&F in repairs Front Glass shelf with chromium plated guard rails, complete all as specified and directed by Engineer-in Charge. Make Jaquar Cat No ACN-1171N and equivalent in CERA.

S&F in repairs 15 mm dia Wall mixer, WHB mixer & Sink mixer chromium plated screwed down high pressure with crutch or butterfly handle screwedboth ends for iron pipes or for unions and fixed complete all as specifie and as directed. Make : Jaquar or and equivalent in CERA.

S&F in repairs 15mm bore Bib tap Chromium plated, complete all as specified and directed by Engineer-in Charge. Make : Jaquar or and equivalent in CERA.

S&F in repairs 15mm bore angular stop cock with wall flange, complete all as specified and directed by Engineer-in Charge. Make : Jaquar or and equivalent in CERA.

S&F in repairs PVC connection 15mm bore 450 mm long, complete all as specified and directed by Engineer-in Charge.

Taking up or down steel tubing 15mm Bore with connections for cleaning for refixing or removing to store yard complete all as specified.

Taking up or down steel tubing 20mm Bore with connections for cleaning for refixing or removing to store yard complete all as specified.

M & L 15mm bore galvanised steel water tubing medium grade (ISI Marked) with all fittings and fixed complete to walls and or laid under floors etc complete all as specified.

M & L 20mm bore galvanised steel water tubing medium grade (ISI Marked) with all fittings and fixed complete to walls and or laid under floors etc complete all as specified.

M&L in repairs Gun metal globe of gate valve with iron wheel head, screwed both ends of size 20mm, complete all as specified and directed by Engineer-in Charge.

M&L in repairs Gun metal globe of gate valve with iron wheel head, screwed both ends of size 15mm, complete all as specified and directed by Engineer-in Charge.

M & L in repairs brass chromium plated shower rose 125mm size with swivel joint fixed to pipe or union of 15mm bore complete all as specified.

Dismantling water tanks and removing to store exc 250 & n.exc 500 ltrs of capacity. all as specified

S&F rotational moulded polyethylene water storage tanks ( cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I of capacity 1000 liters including all accessories complete all as specified .

Demolition of cement concrete in ground floors and providing not exc. 15cm thickness (below or above ground level), complete all as specified and directed by Engineer-in Charge.

M&L for 75 mm thick PCC 1:4:8, type D-2 by using 40 mm graded stone aggregate as in sub base floor, complete all as specified and directed by Engineer-in Charge.

M&L for sand cushion 20 to 30 mm thick for laying and fixing interlocking tiles, complete all as specified and directed by Engineer-in Charge.

M&L machine pressed precast concrete interlocking paver block (glossy finish) any shape and size (sample approved by GE) confirming to IS 15658-2006 of 60 mm thickness M-35 grade with grey cement and pigment. complete all as specified and directed by Engr-In-Charge.

Demolition of renieforced cement concret not exeeding 15cm thickness (below or above ground level), complete all as specified and directed by Engineer-in Charge.

M&L for reinforced cement concrete type B-1 (using 20mm graded crushed stone graded aggregatework as in slabs supported on walls , beams etc, complete all as specified and directed by Engineer-in Charge.

M&L for form work to soffits of suspended slabs and similar work not exceeding 200mm thick, complete all as specified and directed by Engineer-in Charge.

M&L for mild steel steel TMT bars 10mm dia and over cut to length bent to shape reqd ,incl cranking ,bending spirally for hooping columns hooking ends and binding with mild steel wire annealed not less than 0.9 mm dia, complete all as specified and directed by Engineer-in Charge.

M&L Precasted RCC 1:2:4 type B1 using 20mm graded aggregates for precast cement conc slabs as in manhole/drain covers set in cement mortar1:4. complete all as specified and directed by Engineer-in Charge.

M&L for brick work with sub class 'B' bricks exc 6m mean radius straight or curved on plan built in cement mortar 1:4 complete all as specified and directed by Engineer-in Charge.

M&L rendering 15mm thick in cm 1:4 concrete, stone or brick surfaces as in wall finishes even andsmooth w/o using extra cement complete all as specified and directed by Engineer-in Charge.

M&L For PCC type B1(1:2:4) using 20 mm graded cushed stone agg as in coping, benching and the like incl form work, complete all as specified and directed by Engineer-in Charge.

Excavation in trenches not exc 1.5m wide and not exc. 1.5m depth in any type of soil for foundation etc or for shafts, well drain pipes getting out in any type of soil complete all as specified.

Returning fillling in including spreading, levelling watering and well ramming in layers not exc 25cm thick in each layer complete all as specified.

Removing excavated soil to a distance n exc 50m and depositing at alevel n exc 1.5m above the starting point, complete all as specified and directed by Engineer-in Charge.

Demolition & breaking up drain pipes (SGSW) of 150mm dia pipe, complete all as specified and directed by Engineer-in Charge.

Demolition & breaking up drain pipes (SGSW) of 200mm dia pipe, complete all as specified and directed by Engineer-in Charge.

M&L for Plain cement concrete 1:4:8 type D-2 using 40mm graded agg as in foundation filling and mass concrete, complete all as specified and directed by Engineer-in Charge.

M&L for Plain cement conc 1:4:8 type D-2 using 40mm graded agg as in conc bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 150mm bore pipes, complete all as specified and directed by Engineer-in Charge.

M&L for Plain cement conc 1:4:8 type D-2 using 40mm graded agg as in conc bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 200mm bore pipes, complete all as specified and directed by Engineer-in Charge.

M&L for 150mm dia Reinforced concrete pipes, class NP2, laid and jointed complete with collars, complete all as specified and directed by Engineer-in Charge.

M&L for 200mm dia Reinforced concrete pipes, class NP2, laid and jointed complete with collars, complete all as specified and directed by Engineer-in Charge.

M&L PCC 1:3:6 type C-1 as in surface channels/drains, complete all as specified and directed by Engineer-in Charge.

Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out in soft/loose soil etc complete all as specified and directed by Engineer-in Charge.

M&L for RCC M-25 (20mm graded aggregate) as in foundations footings, plinth beams etc complete all as specified and directed by Engineer-in Charge.

M&L for RCC M-25 (20mm graded aggregate) as in columns, pillars etc complete all as specified and directed by Engineer-in Charge.

M&L for RCC M-25 (20mm graded aggregate) as in beams, lintels etc, complete all as specified and directed by Engineer-in Charge.

M&L for RCC M-25 (20mm graded aggregate) as in slab type Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed by Engineer-in Charge.

S&F TMT bars 5mm and over upto and including 10mm dia in stirrups, spacers and binders bent to shape required,including binding with mild steel wire (annealed) not less than 0.9mm dia , complete all as specified and directed by Engineer-in Charge.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter , complete all as specified and directed by Engineer-in Charge.

Formwork to sides of pillars, posts, struts, piers, columns and stanchions, complete all as specified and directed by Engineer-in Charge.

M & L formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressumers, lintes,cantilevers, shelves including supports, overhangs, etc also splays beteen floors and beams finished rough surfaces of concrete, complete all as specified and directed by Engineer-in Charge.

M & L form work to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, opening in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10 cm but n exc 20 cm wide, complete all as specified and directed by Engineer-in Charge.

M&L half brick wall with sub class B bricks, straight or curved on plan exc 6 m mean radium built in CM 1:4 all as specified and as directed.

M & L hardcore of broken stone or boulders of gauge exc. 63mm but n exc 100mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and well rammed to a true surface, complete all as specified and directed by Engineer-in Charge.

S&F Vitrified Dura stone tiles of size not exceed 0.36 sqm and 10 mm thick as in floors and over & including 15mm thick screed bed or bedding layer in cement mortar 1:4, including jointed with neat cement slurry and pointed in coloured cement to match the surface of tiles, complete all as specified and directed

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed.

S&F Rolled sections as in main and cross beams, hip and jack rafters, poles, purlins where connected to common rafters and running rails and guides for sliding door: fixed with angle cleats or other connecting plates to Fe-290 (Gde E-165) complete all as specified and as directed.

S&F prepainted galvolume aluminum zinc coating GE based corrugated/ plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with sef tapping screws complete all as specifed and as directed

M&L rendering 15mm thick in cement mortar (1:6) on fair faces of brick work or concrete surfaces & finishing the surface even & smooth without using extra cement complete all as specified & directed.

M&L Rendering 5mm thick on concrete surfaces in CM 1:3 as on ceiling all as specified and as directed.

Material and labour for APP polymaric water proofing membrene minimum 3mm thick and weighting not less than 3.6 kg / sqm of make 'Moply FP' manufactured by STP Texsa Ltd or' Hyper Plas' ( polyster) manufactured by M/S IWL Ltd or'Shaliplas' (polyster) manufactured by M/S Capital Steels and chemicals Pvt Ltd or 'Mak polyplast' manufactured by M/S M K Petro as approved by GE , black finished reinforced with non weven polyster matt,with fusable finish laid over compatable bitumen primer at the rate of 0.40 Ltr/Sqm torching overlaps with a propane or abutane gas torch, with a over lap of 75mm at the sides and100 at the ends and sealing including applying a coat of cold emulsion bituminous primer all as per manufactur's instructions including 0.40 Ltr/Sqm torching overlaps with a propane or abutane gas torch, with a over lap of 75mm at the sides and100 at the ends and sealing including applying a coat of cold emulsion bituminous primer all as per manufactur's instructions including preparation of surface, complete all as specified and as directed. Note : the water proofing treatment shall be carried out by the manufacturer or their authorised applicators.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces, complete all as specified and directed by Engineer-in Charge.

M&L for two or more coats of Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification, complete all as specified and directed by Engineer-in Charge.

Taking down carefully, copper/ aluminum point wiring (light, fan, socket or power) complete including fitting such as switch, sockets, ceiling rose, pendants socket,fan regulators any type, rectangular board ,light fittings,terminal boxes etc removing materials for taking credit and making good disturbed surfaces of walls floors and ceiling complete all as directed.

Taking down carefully copper/aluminium sub main wiring of size 2.5/4/6 sqmm from surface/concealed at any height and removing the materials from site and making good the disturbed surfaces of walls,floors roofs etc complete all as specified and directed.

Taking down Old/ Unserviceable MCB DBs TPN / Main Switches by disconnection of electric connection including old unsv MCCBs,MCBs, isolators etc and making good to distrubed surface complete all as specified and directed.

Disconnecting and taking down un serviceable light fittings of any description/ capacity complete all as specified.

Point wiring for one light/ fan/bell point controlled by one switch using 1.5 Sq mm FRLSH copper conductor cables (multistanded) PVC insulated and unseathed in and including PVC concealed conduit as per site requirement (size not less than 20mm dia), medium grade with Modular sunken boxes & PVC/Metal back plate for mounting modular type switches, sockets & regulators etc with cover plate modular type including supplying and laying PVC insulated and stranded unsheathed 1100 volts coppper conductor cable 1.5 Sq mm as earth wire connected to earth dolly including cutting of chases in wall / ceiling etc and making good the disturbed surfaces match to existing with cement mortar and putty white/ colour wash complete all as directed. Make : Havells/ Finolex/ Polycab.

All as per srl item No 157 but for 3 pin 6 Amps socket outlet independent board including PVC insulated PVC unsheathed 2.5 sq mm earth wire and connected to earth dolly.

All as per srl item No 157 but for 3 pin 6 Amps socket outlet on the same board including PVC insulated PVC unsheathed 2.5 sq mm earth wire and connected to earth dolly.

All as per Srl item No 157 but for 3 Pin 16 Amps socket outlet independent board with cable 2.5 Sq mm including copper PVC insulated PVC unsheathed 2.5 sq mm earth wire standard and connected to earth dolly.

All as per srl item No 157 but for One light point controlled by two 2-way switches,with cables 1.5 sq. Mm size

S&F for modular switch 10 Amps single pole two way 230 V, 50 Hz, AC , with inner and outer cover strip required module complete all as specified and directed by Engr In charge.Make: Havells/ Legrand

S&F for modular switch 6 Amps single pole one way 230 V, 50 Hz, AC , with inner and outer cover strip required module complete all as specified and directed by Engr In charge.Make: Havells/ Legrand

S&F for modular switch 16 Amps single pole one way 230 V, 50 Hz, AC , with inner and outer cover strip required module complete all as specified and directed by Engr In charge. Make: Havells/ Legrand

S & F modular Bell push flush type 6 amp 230 V, 50 Hz, AC , with inner and outer cover strip required module complete all as specified and directed by Engr In charge. Make: Havells/ Legrand

S&F for modular socket 3 Pin 6 Amps flush type 230 V, 50 Hz, AC , with inner and outer cover strip required module complete all as specified and directed by Engr In charge. Make: Havells/ Legrand

S&F for modular socket combined 2-in-1, 6 Pin 6 & 16 Amps 230 V, 50 Hz, AC , flush type with inner and outer cover strip required module complete all as specified and directed by Engr In charge. Make: Havells/ Legrand

S&F electronic step type fan regulator 100 watt 230 volts 50Hz two module C/S deluxe type complete all as specified and directed. Make- Havells/ Legrand/ Philips

M &L Ceiling rose, surface bakelite 65x 50mm two to three terminals fixed on PVC Round Blockcomplete all as specified and directed by Engr In charge. Make: Havells/ Legrand/ANCHOR ROMA

S & F calling Bell ding dong 230 volts single pole 50Hz complete all as specified and directed by Engr In charge. Make: Havells/ Legrand/ANCHOR ROMA

S&F Sheet metal enclosure double door type for MCCB TPN DB upto 125 Amps, 4 way vertical type 415 volts with 400 Amps rated busbar and neutral link chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed. Make:- Havells/ legrand/ Schneider.

S&F Sheet metal enclosure double door type for DBs (when MCB to be used) 8 way 240 volts with 200 Amps rated busbar and neutral link including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed. Make:- Havells/ legrand/ Schneider.

S & F in replacement MCCB Three Pole & Neutral capacity of 100 amps 415 volts rupturing capacity 16 KA complete all as specified and directed.Make - Havells/ legrand/ Schneider

S & F in replacement MCB Single pole and neutral 240 volt any rating from 40 amps"C" series, with rupturing capacity 10 KA ,inculding providing thimble for out going cable complete all as specified and directed by Engr In charge. Make:- Havells/ legrand/ Schneider.

S & F in replacement MCB single pole 240 volt any rating from 10 to 40 amps "C" series, with rupturing capacity 10 KA ,inculding providing thimble for out going cable, complete all as specified and directed by Engr In charge. Make:- Havells/ legrand/ Schneider.

S & F in replacement MCB single pole and neutral 240 volt any rating from 63 Amps "C" series, with rupturing capacity 10 KA ,inculding providing thimble for out going cable, complete all as specified and directed by Engr In charge. Make:- Havells/ legrand/ Schneider.

S&F Sub main wiring with two single core PVC insulated with copper conductor cable stranded of size 10 Sqmm in PVC concealed conduit 25mm dia including PVC insulated copper conductor cable 10 Sq mm as earth lead all as specified. Including taking down old sub main wire. Make: Gloster/ Finolex/ Polycab.

S&F Sub main wiring with two single core PVC insulated with copper conductor cable stranded of size 6 Sqmm in PVC concealed conduit 25mm dia including PVC insulated copper conductor cable 6 Sq mm as earth lead all as specified. Including taking down old sub main wire. Make: Gloster/ Finolex/ Polycab.

S&F Sub main wiring with two single core PVC insulated with copper conductor cable stranded of size 4 Sqmm in PVC concealed conduit 25mm dia including PVC insulated copper conductor cable 4 Sq mm as earth lead all as specified. Including taking down old sub main wire. Make: Gloster/ Finolex/ Polycab.

Earthing complete with galvanized steel earth plate electrodes 600 mmx600 mm x6.3 mm thick buried directly in ground earth plate not less than 2.25 m deep below normal ground level with top edge of the plate not less than 1.5 m below normal ground level connected to and including galvanized steel earth lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron and steel including PCC pit in PCC 1:2:4 type B-1using 20 mm graded crushed stone aggregate, RCC frame with 40mm thick RCC cover reinforced with 8mm dia deformed bars handle. including excavation and earth work in any type of soil medium grade GI watering pipe 20mm bore with funnel and wire mesh and light grade GI protection pipe 15mm bore main board complete all as shown in electrical plate No 5 connected to main control board all as specified and testing on completion. Note: Excavation earthwork charcoal PCC pit is covered under this item including taking out existing earth plate etc.Note: if earth resistance of earthing is not found (2 to 5 Ω) satisfactory if will be redone by the contractor on his risk and cost.

Taking down ceiling fan/Exhaust fans (C/F of any size/make), cleaning its dust particles oiling,greasing,one coat of synthetic enamel white spray painting with blade ,reassemble the same along with all fittings and hanging the same back to its original position including connecting the wire to ceiling rose etc complete after completing the wiring all as specified and as directed by Engr-in-Charge. Note :- (i) The spares like condensor, ball bearing, cotter pin, nuts & bolts, connecting rods & hooks etc if found defective/damage deemed to be replaced and make the ceiling fans functional. No extra payments will be done on this account.

S & F Angular Lamp holder, PVC/Polycarbonate type with cord grip cap suitable for light fittings, complete all as specified and directed by Engr In charge.

Supply and fixing LEDBulb 15W, 230V,AC suitable for Angular Lamp holder, complete all as specified and directed by Engr In charge.

Supply and fixing LED lights fitting 1x 20W, 230V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Engr In charge.

S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitablesize, complete all as specified and directed by Engr In charge.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engr In charge.

Supply and fixing LED building security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp,clamps,suitable bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed by Engr In charge.

S&F Street light Bracket complete made of GI pipe of suitable size, medium grade 1.2 m long bent to shape as per site requirement along with MS flat iron clamps with nuts, bolts, washers including grouting the same with wall , all as specified and directed by Engg- in Charge.

Material & Laying in trenches or passing through pipe, 1100 volts grade heavy duty cable with "XLPE" insulated aluminium conductor standard served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed of 25 Sqmm x 3.5 core size all as specified including taking down old cable, complete all as specified and directed by Engr In charge. Note : Earth work and other connected work shall be measured & paid sperately.

M & L Dry sand for sand cushioning to under ground cable 8 cms thick before laying the cable before and 15 cms thick after laying & streching the cable in trenches, including hand punning and consolidating complete all as specified and directed by Engr In charge. Note : for payment purpose punned thickness shall be measured

M&L Bricks sub class 'B' brick laid dry, flat with width equal to length of brick as cover laid over the cabel to give mechanical protection to underground cabels complete all as specified and directed by Engr In charge.

Supply and fixing in repairs GI tubing light grade 40 mm dia along the wall/ in trenches/ in duct / in culvert /road crossing and including provisioning of suitable mild steel flat iron clamps and bolts, nuts and double washers etc for holdining of GI pipe alongwith poles complete all as specified and directed by Engr In charge.

s l sharma and sons (BID ID -3368221)

PARDEEP SHARMA (BID ID -3360116)

VIRINDER SINGH (BID ID -3368197)

SINGH CONST CO (BID ID -3361130)

M/S Ashok Kumar Jaswal (BID ID -3360718)

VISHWANATH AND SONS (BID ID -3361060)

MAHADEV ENTERPRISES (BID ID -3357431)

M/S IMRAN MAJID (BID ID -3368228)

M/S R S Builders (BID ID -3361829)