Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹20.9 LAccepted-AOC | L1 | Accepted-AOC lowest bidder | |
| 2 | L2₹28.9 L+₹7.2 L (33.2%)Rejected-Finance 44B CIRCULAR GARDEN REACH ROAD KOLKATA 700 023 | KOLKATA | WEST BENGAL | 700023 | L2 | Rejected-Finance HIGHER BIDDER | |
| 3 | L3₹29.0 L+₹7.3 L (33.8%)Rejected-Finance 52A 1A NAZIR LANE KIDDERPORE KOLKATA 700023 | KOLKATA | KOLKATA | WEST BENGAL | 700023 | L3 | Rejected-Finance HIGHER BIDDER | |
| 4 | L4₹29.2 L+₹7.6 L (35.0%)Rejected-Finance 42 43A VIDYA SAGAR SARANI PALLY BARISHA KOLKATA 700 008 | KOLKATA | WEST BENGAL | 700008 | L4 | Rejected-Finance HIGHER BIDDER | |
| 5 | L5₹32.4 L+₹10.8 L (49.8%)Rejected-Finance 2 BAISHNAB SETH 1ST LANE KOLKATA 700006 | KOLKATA | WEST BENGAL | 700006 | L5 | Rejected-Finance HIGHER BIDDER |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
9 Oct 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
VIVEK TANENIA
GARRISON ENGINEER (CENTRAL) KOLKATA T37 NAPIER ROAD HASTING KOLKATA 700022
REPAIR TO EXTERNAL WATER SUPPLY MOTORS DEVELOPMENT OF BOREWELL VALVE CHAMBERS AND CLEANING OF OH TANK UG SUMP SEWAGE SUMP AT OD ALIPORE AND MAP PH-II AT SAHAPUR MIL CAMP UNDER GE (CENTRAL) KOLKATA
2023_MES_619415_1
8645/E8
Open Tender
Miscellaneous Works
Item Rate
270 days
KOLKATA
AS PER TENDER DOCUMENTS
9 documents required · 9 mandatory
₹500
Yes
GE (C) KOLKATA
₹60,000
Yes
18 Mar 2024
18 Sept 2023
10 Oct 2023
18 Sept 2023
9 Oct 2023
4 Oct 2023
18 Sept 2023 - 3 Oct 2023
Amount
Excavation in trenches not exc. 1.5 Metre wide and not exc. 1.50 Metre in depth for foundation etc. or for shafts, wells, cess pits, manholes, pier holes etc. not exc. 10 Sqm on plan and not exc. 1.50 Metre in depth and getting out as in Soft/Loose Soil, complete all as specified and as directed.
Excavation in trenches not exc. 1.5 Metre wide and not exc. 1.50 Metre in depth for foundation etc. or for shafts, wells, cess pits, manholes, pier holes etc. not exc. 10 Sqm on plan and not exc. 1.50 Metre in depth and getting out as in hard/dense Soil, complete all as specified and as directed.
Returning, Filling in, including Spreading, Levelling, Watering and Well Ramming in Layers not exc. 25 Cm as in Soft/Loose Soil, complete all as specified and as directed.
Removing excavated Material (Soil) not exc. 50.00 Metre and depositing where directed at a level not exc. 1.50 Metre above the starting point, complete all as specified and as directed.
Taking up / down the following size of water mains and connections/fittings of any type from trenches/ walls / floors (of any location) for replacement / re-use in old / new location/diversion by burning out/removing of lead joint/tyton joint/rubber gasket joint all as specified and directed by the Engr-in-Charge. Note: Necessary earthwork, if any , will be measured and paid separately under relevant items (A) Bore size 150 mm
Bore size 100 mm
Bore size 80 mm
Bore size 50 mm
Bore size 40 mm
Bore size 25 mm
Bore size 20 mm
Supply and Laying Steel Water Tubing 100mm Bore (dia), Galvanised, ‘Medium Grade’ with all Fittings, laid in trenches or any other Situation, complete as all specified and as directed.
Supply and Laying Steel Water Tubing 80mm Bore (dia), Galvanised, ‘Medium Grade’ with all Fittings, laid in trenches or any other Situation, complete as all specified and as directed.
Supply and Laying Steel Water Tubing 50mm Bore (dia), Galvanised, ‘Medium Grade’ with all Fittings, laid in trenches or any other Situation, complete as all specified and as directed.
Supply and Laying Steel Water Tubing 40mm Bore (dia), Galvanised, ‘Medium Grade’ with all Fittings, laid in trenches or any other Situation, complete as all specified and as directed.
Supply and Laying Steel Water Tubing 25mm Bore (dia), Galvanised, ‘Medium Grade’ with all Fittings, laid in trenches or any other Situation, complete as all specified and as directed.
Supply and Laying Steel Water Tubing 20mm Bore (dia), Galvanised, ‘Medium Grade’ with all Fittings, laid in trenches or any other Situation, complete as all specified and as directed.
Supply and Laying Steel Water Tubing 100mm Bore (dia), Galvanised, ‘Medium Grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situation, complete as all specified and as directed.
Supply and Laying Steel Water Tubing 80mm Bore (dia), Galvanised, ‘Medium Grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situation, complete as all specified and as directed.
Supply and Laying Steel Water Tubing 50mm Bore (dia), Galvanised, ‘Medium Grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situation, complete as all specified and as directed.
Supply and Laying Steel Water Tubing 40mm Bore (dia), Galvanised, ‘Medium Grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situation, complete as all specified and as directed.
Supply and Laying Steel Water Tubing 25mm Bore (dia), Galvanised, ‘Medium Grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situation, complete as all specified and as directed.
Supply and Laying Steel Water Tubing 20mm Bore (dia), Galvanised, ‘Medium Grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situation, complete as all specified and as directed.
Relaying/Re-fixing Galvanised Steel Tubing 20mm Bore (dia) and Connections in New or Old Position (Serviceable Pipes and Fittings obtained from taking down item) after Cleaning both Inner and Outer Surfaces of Pipes by using of Wire Brush complete all as specified and as directed.
Relaying/Re-fixing Galvanised Steel Tubing 25mm Bore (dia) and Connections in New or Old Position (Serviceable Pipes and Fittings obtained from taking down item) after Cleaning both Inner and Outer Surfaces of Pipes by using of Wire Brush complete all as specified and as directed.
Relaying/Re-fixing Galvanised Steel Tubing 40mm Bore (dia) and Connections in New or Old Position (Serviceable Pipes and Fittings obtained from taking down item) after Cleaning both Inner and Outer Surfaces of Pipes by using of Wire Brush complete all as specified and as directed.
Relaying/Re-fixing Galvanised Steel Tubing 50mm Bore (dia) and Connections in New or Old Position (Serviceable Pipes and Fittings obtained from taking down item) after Cleaning both Inner and Outer Surfaces of Pipes by using of Wire Brush complete all as specified and as directed.
Supply, laying and testing 80 mm bore CI water mains with spigot and socket ends,centrifugally cast of class 'LA' in any length, laid in trenches complete all as specified and directed . Note : Necessary earth-work to be measured and paid separately under relevant items.
Supply, laying and testing 100 mm bore CI water mains with spigot and socket ends,centrifugally cast of class 'LA' in any length, laid in trenches complete all as specified and directed . Note : Necessary earth-work to be measured and paid separately under relevant items.
Supply, laying and testing 150 mm bore CI water mains with spigot and socket ends,centrifugally cast of class 'LA' in any length, laid in trenches complete all as specified and directed . Note : Necessary earth-work to be measured and paid separately under relevant items.
Labour only run lead joints for the following size CI water mains any size and shape, complete all as specified and directed by Engineer-in-Charge (a) Bore size 150 mm
Bore size 100 mm Note : In case of inadequet lead received from burning out for remaking joints, the additional lead required shall be measured and paid separately as "Supply only".
Supply only run lead complete all as specified and directed.
M&L Cutting existing CI/DI water mains in position, for addn/altrn or for taking branch connection/insertion of pipe specials, valve of 150 mm bore pipe complete all as directed by Engineer- in- charge.
S&F CI /DI bends (any type radious & angle) tapers any type (strain out bend) increasing decerising or double socket etc Tee pieces (single branch) junction double brash cross collars (flanged or socket & spigot suitable for upto 150mm DI/CI pipe after taking out the old unserviceable one.complete all as specified and as directed by Engr-in-Charge.
S&F Cast Iron Sluice valve of 150 mm bore of pressure rating PN-1.6 conforming to IS : 14846 – 2000 specifications comprising of cast iron body with control assembly of flanged both ends, brass spindle with extended iron rod of 25mm dia & 3.00 m long alongwith iron wheel head, bolts, nuts & washers with 3mm thick rubber gaskets including taking out the old unserviceable one complete all as specified and directed.
Supply and fix Cast Iron Sluice valve of 100 mm bore of pressure rating PN-1.6 conforming to IS : 14846 – 2000 specifications comprising of cast iron body with control assembly of flanged both ends, brass spindle with extended iron rod of 25mm dia & 3.00 m long alongwith iron wheel head, bolts, nuts & washers with 3mm thick rubber gaskets including taking out the old unserviceable one complete all as specified and directed.
Repair to u/s sluice valve 150mm bore by dismantling all the parts after removing from site & replacement of all parts like brass spindle GM lock nuts, gaskets, nuts both & washer etc to make fully serviceable and re-fixing the same in original position including connection complete all as specified and directed. Note : Brass spindle will be measured & paid separately.
Repair to u/s sluice valve 100mm bore by dismantling all the parts after removing from site & replacement of all parts like brass spindle GM lock nuts, gaskets, nuts both & washer etc to make fully serviceable and re-fixing the same in original position including connection complete all as specified and directed. Note : Brass spindle will be measured & paid separately.
Supply only brass spindle suitable for 150mm bore sluice valve complete all as specified and directed.
All as per item No.40.00 but suitable for 100mm bore sluice valve complete all as specified and directed.
S&F Gun metal vertical check valve 100 mm dia heavy duty (ISI marked) flanged end including rubber gasket joints, nuts, bolts etc as in repair complete all as specified and directed.
S&F Gun metal vertical check valve 80 mm dia heavy duty (ISI marked) flanged end including rubber gasket joints, nuts, bolts etc as in repair complete all as specified and directed.
S&F 100mm bore Cast iron non return valve double flanged (class-'B) high pressure conforming to IS-5312 ete with nuts, bolts & washer gaskets etc including taking down the old unserviceable one complete all as specified and directed.
S&F 80mm bore Cast iron non return valve double flanged (class-'B) high pressure conforming to IS-5312 ete with nuts, bolts & washer gaskets etc including taking down the old unserviceable one complete all as specified and directed.
S&F 100mm bore Cast Iron butterfly valve, BS-5155 lever operated with necessary rubber gaskets, nuts and bolts and washers of suitable size as in repair complete all as specified and directed .
S&F 80mm bore Cast Iron butterfly valve, BS-5155 lever operated with necessary rubber gaskets, nuts and bolts and washers of suitable size as in repair complete all as specified and directed .
S&F 80 mm bore Gun metal gate valve as per IS : 778-84, marked Class-2 Pressure tested 2.4 Mpa with iron wheel head, screwed both ends for iron pipes or for unions as in repair complete as all specified and as directed.
S&F 50 mm bore Gun metal gate valve as per IS : 778-84, marked Class-2 Pressure tested 2.4 Mpa with iron wheel head, screwed both ends for iron pipes or for unions as in repair complete as all specified and as directed.
S&F 40 mm bore Gun metal gate valve as per IS : 778-84, marked Class-2 Pressure tested 2.4 Mpa with iron wheel head, screwed both ends for iron pipes or for unions as in repair complete as all specified and as directed.
S&F 25 mm bore Gun metal gate valve as per IS : 778-84, marked Class-2 Pressure tested 2.4 Mpa with iron wheel head, screwed both ends for iron pipes or for unions as in repair complete as all specified and as directed.
S&F 20 mm bore Gun metal gate valve as per IS : 778-84, marked Class-2 Pressure tested 2.4 Mpa with iron wheel head, screwed both ends for iron pipes or for unions as in repair complete as all specified and as directed.
S&F Water pressure gauge 100mm dia in the main line of pump including necessary dirlling welding, taping/Threading of existing line etc with taking out unserviceable one complte all as specified directed by Engr-in-Charge.
Leakage detection in GI water mains upto 150mm bore and necessary repairs including cutting, threading for addition/alteration and insertion necessary of fittings like tee,elbow, branches pieces etc complete all as directed by the Engr-in-Charge.
Materials and Labour for Construction of brick masonary valve pit chamber of size 1050x1050x1050mm internal dimension using sub class-'B' bricks in CM (1:6) plastering in cement mortar (1:4) externally & internally extended to 15 cm below ground level including PCC bed 10 cm thick in PCC 1:3:6 Type C2 with MS frame fabricated by angle of size 40 x 40 x 6mm complete with top cover of 3 mm thick MS sheet & locking arrangement and painting with two coats of synthetic enamel over a coat of red oxide primer including demolition of old unserviceable damged valve pit complete all as specifed and directed.
Construction of brick masonary valve pit chamber of sizse 900 x 900 x 900 mm internal dimension using sub class-'B' bricks in CM (1:6) plastering in cement mortar (1:4) externally & internally extended to 15 cm below ground level including PCC bed 10 cm thick in PCC 1:3:6 Type C2 with MS frame fabricated by angle of size 40 x 40 x 6mm complete with top cover of 3 mm thick MS sheet & locking arrangement and painting with two coats of synthetic enamel over a coat of red oxide primer including demolition of old unserviceable damged valve pit complete all as specifed & directed.
Construction of brick masonary valve pit chamber of sizse 600 x 600 x 600 mm internal dimension using sub class-'B' bricks in CM (1:6) plastering in cement mortar (1:4) externally & internally extended to 15 cm below ground level including PCC bed 10 cm thick in PCC 1:3:6 Type C2 with MS frame fabricated by angle of size 40 x 40 x 6mm complete with top cover of 3 mm thick MS sheet & locking arrangement and painting with two coats of synthetic enamel over a coat of red oxide primer including demolition of old unserviceable damged valve pit complete all as specifed and directed.
Development of Tube well with suitable capacity compressed air for a period not less than 24 Hrs but till the sand free water is obtained (sand content of water shall not be more than 10ppm) complete all as specified and as directed by Engineer-in-Charge.
Lifting and lowering of submersible pump and motor of 15HP / 20 /22.5 HP from bore well with the help of chain pully including scaffolding and all other necessary arrangement complete all as specified and directed by Engr-in-Charge. Note:- (i) One lifting and one lowering should be measued as one unit. (ii) Replacment of minor spare parts i.e impeller key, neck ring, coupling bush and key,nuts bolts, washer etc. reassembling the pump after routine maintenance of serviceable spares and replacment of spare part shall be measured and paid separately under relevant items of BOQ.
Lifting and lowering of submersible pump and motor of 15HP / 20 HP from under ground sump with the help of chain pully including scaffolding and all other necessary arrangement after routine maintenance of serviceable spares testing and commissioningcomplete all as specified and directed by Engr-in-Charge. Note:- One lifting and one lowering should be measued as one unit.
Repairing the submersible pump 15/20 /22.5 HP by cleaning, derusting, and replacment of minor spare parts i.e impeller key, neck ring, coupling bush and key,nuts bolts, washer etc. reassembling the pump after routine maintenance of serviceable spares and replacment of spare parts, testing and commissioning complete all as specified and directed. Note:- Spare parts other than minor spares required to be replaced shall be measured and paid seperately under 'Supply only' items below.
Supply only Suction Bush
Supply only Stage Casing Bush
Supply only Stainless Steel Shaft
Supply only Stainless Steel Sleeves
Supply only GM Impeller
Supply only Stage casing Ring
Supply only NRV
Supply only Sort piece with flange
Supply only Stainless Steel Nut and Bolt with washer
Supply only MS Nut and bolt with washer
Supply only Rubber Gasket
Material and Labour Rewinding of submersible electric motor AC 3phase 415 volts 50- HZ of capacity 15 HP / 20 HP /22.5 HP with water proof PVC insulated copper wire of same specification after removing the old burnt out winding and replacment of bush bearing etc including testing & commissioning complete all as specified and directed by Engr-in-Charge.
Material and Labour Rewinding of mono block submersible pump & motor of 15 HP / 20 HP after removing old burnt out winding with new PVC water proof copper cable, overhauling and repacement of bush bearing etc complete all as directed by Engr-in-Charge.
Repairs Panel board for pump of any size/ any type by disconnecting and taking out old unserviceable wires and spare parts and rewiring the same with same size of copper wire, replacment of nut & bolts with washers, painting with one coat of synthetic enamel paint of existing colour including necessary preparation of surfaces including testing and commisioning complete all as specified and directed by Engr-in-Charge. Note:- Any other Electrical fittings connecting to panel board should be measured and paid separately.
Supply and fix Fully automatic star delta starter with steel enlosure AC 3 phase, 415 volt 50 Hz, type ML-1.5 relay range 14-23 Amps suitable for 10 HP pump motor set fixing on existing LT panel board complete all as specified and as directed.
Supply and fix Contactor ML-2, 32A capacity, 2NO + 2NC, 415 V ratings fixing on existing LT panel board complete all as specified and as directed.
Supply and fix Contactor ML 1.5, 24A, capacity, 2NO + 2NC, 415 V ratings fixing on existing LT panel board complete all as specified and as directed.
Supply and fix Electronic timer ET-100, 415 V, 50 Hz fixing on existing LT panel board complete all as specified and as directed.
Supply and fix CT Coil fixing on existing LT panel board,capacity 100 amps complete all as specified and as directed.
Supply and fix Relay, thermal overload type for ML-2 contactor, 13-21 A fixing on existing LT panel board complete all as specified and as directed.
Supply and fix Relay, thermal overload type for ML-1.5 contactor, 1.5-2.5 A fixing on existing LT panel board complete all as specified and as directed.
Supply and fix Single Phase Preventer fixing on existing LT panel board complete all as specified and as directed.complete all as specified and directed.
Supply and fix PVC insulated water proof 3 core cable suitable for submersible pump set 1100 volts grade with stranded copper conductor cable of size 4 Sqmm including taking out the old unserviceable one complete all as specified and directed.
Dismantling the channel base and taking out the pump & motor of capacity 7.5/10 HP AC 3 phase 415 volt disconnecting the pump motor, opening the pump, cleaning derusting thoroughly, machining inside body of the pump & repairing by replacement collar rings, gaskets, Impeller locknuts, shaft key etc re-assembling the pump including installtion & testing commissioning complete all as specified and directed. Note:- Spare parts other than minor spares required to be replaced shall be measured and paid seperately under 'Supply only' items below.
Supply only Stainless Steel Shaft
Supply only Brass Impeller
Supply only Gun metal Bush
Supply only Pump Bearing
Supply only Motor Bearing
Supply only Stage casing ring
Supply only Gland packing
Supply only stainless Steel Shaft sleeve
Supply only Casing wear ring
Supply only Coupling pulley of Pump motor
Material and Labour Rewinding of electric motor AC 3phase 415 volts 50- HZ of capacity 7.5/10 HP with supper enamel copper wire of same size and heating and vernishing after removing the old burnt out winding including replacement of bearing etc testing & commissioning complete all as specified and directed by Engr-in-Charge.
Material and Labour Cutting PCC foundation for taking out the channel base replacing the same with new channel base complete foundation with PCC 1:4:8 D2 type, using 40mm graded crushed stone aggregate and fixed the pump and motor with grouting bolt of 9'' long -4Nos complete all as specifed and directed by Engr-in-Charge.
De-watering and cleaning of underground sumps or service tank upto 100000 Gln capacity cleaning the sump with wire brush,cloth ,bleaching powder,removing all dirt scale from tank and from mouths of circulating pipes etc through drain pipe or by manually including writing with white paint in tank wall as "TANK CLEANED ON" with date ,month and year with a minimum 10 CM height capital letters/numbers and conducting all connections (if any) after cleaning and testing the followings at different multi-storeyed buildings complete all as specified and directed by Engineer-In-Charge. (a) To drain out the water by using exit valve or our own high capacity dewatering system. (b) Cleaning all the algae formation insied the tank by using TERBAC G5 a laboratory tested branded chemical of the company and scrubbing the walls of the tanks.(c) Fresh water cleaning by high speed jet pump (d) First bacteria screening is desertification by using TERBAC G5 a govt laboratory certified branded halogen compound. (e) Cleaning of the floor of the water tank by industrial vacuum cleaner. (f) The second bacteria screening and sterlizing method by using ultra violet ray with in the tank and kills all suspended bacteria. (g) Cleaning the third bacteria screening and sterilize the floor of the water tank by using laboratory certified branded strong oxidizing agent TERBAC G65.
De-watering of existing overhead water tank size 50000 Gln capacity at upto 20 feet staging cleaning the overhead tank with wire brush,cloth ,bleaching powder,removing alll dirt scale from tank and from mouths of circulating pipes etc through drain pipe or by manually including writing with white paint in tank wall as "TANK CLEANED ON" with date ,month and year with a minimum 10 CM height capital lettrs/numbers and conducting all connections (if any) after cleaning and testing the followings at different multi-storeyed buildings at BM camp complete all as specified and directed by Engineer-In-Charge.(a) To drain out the water by using exit valve or our own high capacity dewatering system. (b) Cleaning all the algae formation insied the tank by using TERBAC G5 a laboratory tested branded chemical of the company and scrubbing the walls of the tanks.(c) Fresh water cleaning by high speed jet pump (d) First bacteria screening is desertification by using TERBAC G5 a govt laboratory certified branded halogen compound. (e) Cleaning of the floor of the water tank by industrial vacuum cleaner. (f) The second bacteria screening and sterlizing method by using ultra violet ray with in the tank and kills all suspended bacteria. (g) Cleaning the third bacteria screening and sterilize the floor of the water tank by using laboratory certified branded strong oxidizing agent TERBAC G65.
De-watering and cleaning of underground sumps or service tank upto 25000 Gln capacity cleaning the sump with wire brush,cloth ,bleaching powder,removing alll dirt scale from tank and from mouths of circulating pipes etc through drain pipe or by manually including writing with white paint in tank wall as "TANK CLEANED ON" with date ,month and year with a minimum 10 CM height capital lettrs/numbers and conducting all connections (if any) after cleaning and testing the followings at different multi-storeyed buildings at BM camp complete all as specified and directed by Engineer-In-Charge. (a) To drain out the water by using exit valve or our own high capacity dewatering system. (b) Cleaning all the algae formation insied the tank by using TERBAC G5 a laboratory tested branded chemical of the company and scrubbing the walls of the tanks.(c) Fresh water cleaning by high speed jet pump (d) First bacteria screening is desertification by using TERBAC G5 a govt laboratory certified branded halogen compound. (e) Cleaning of the floor of the water tank by industrial vacuum cleaner. (f) The second bacteria screening and sterlizing method by using ultra violet ray with in the tank and kills all suspended bacteria. (g) Cleaning the third bacteria screening and sterilize the floor of the water tank by using laboratory certified branded strong oxidizing agent TERBAC G65.
De-watering and cleaning of underground sumps or service tank upto 60000 Gln capacity cleaning the sump with wire brush,cloth ,bleaching powder,removing alll dirt scale from tank and from mouths of circulating pipes etc through drain pipe or by manually including writing with white paint in tank wall as "TANK CLEANED ON" with date ,month and year with a minimum 10 CM height capital lettrs/numbers and conducting all connections (if any) after cleaning and testing the followings at different multi-storeyed buildings at BM camp complete all as specified and directed by Engineer-In-Charge. (a) To drain out the water by using exit valve or our own high capacity dewatering system. (b) Cleaning all the algae formation insied the tank by using TERBAC G5 a laboratory tested branded chemical of the company and scrubbing the walls of the tanks.(c) Fresh water cleaning by high speed jet pump (d) First bacteria screening is desertification by using TERBAC G5 a govt laboratory certified branded halogen compound. (e) Cleaning of the floor of the water tank by industrial vacuum cleaner. (f) The second bacteria screening and sterlizing method by using ultra violet ray with in the tank and kills all suspended bacteria. (g) Cleaning the third bacteria screening and sterilize the floor of the water tank by using laboratory certified branded strong oxidizing agent TERBAC G65.
Dismantling of high pressure single head adjustable gear motor of chemical dosing pump and separating the unserviceable parts cleaning the serviceable parts, re-assembling including replacement of old unserviceable parts complete all as specified and directed by Engineer-In-Charge. Note:- Spare parts will be measured and paid separately under supply only item.
Supply only Pump tube complete all as specified and directed. Make: Declibac or equivalent
Supply only foot valve (clay weight -3/8" connection) complete all as specified and directed. Make: Declibac or equivalent
Supply only Injection check valve 3/8".complete all as specified and directed. Make: Declibac or equivalent
Supply only White discharge tube 3/8".complete all as specified and directed. Make: Declibac or equivalent
Supply only Connecting nut 3/8" with adapter complete all as specified and directed. Make: Declibac or equivalent
Supply only diaphram valve for DDP complete all as specified and directed.
Supply only discharge valve for decrine dosing pump complete all as specified and directed.
Dismantling and cleaning thoroughly 5HP monoblock submersible system sewage pump assembly complete and taking out unserviceable worn out spares and overhauling the serviceable spares by derusting etc. and repalcement of minor spares like collaring Impellar key, oil tube, gaskets, nuts, & bolts with washer re-assembling the pump and testing commissioning complete all as specfied and directed by Engr-in-Charge. Note:- Spare parts other than minor spares required to be replaced shall be measured and paid seperately under 'Supply only' items below.
Supply only Angular contact bearing complete all as specified and directed.
Supply only Lock nut Stainless Steel complete all as specified and directed.
Supply only Impeller CI complete all as specified and directed.
Supply only Line shaft Stainless Steel complete all as specified and directed.
Supply only GI column pipe 5' long both end flange complete all as specified and directed.
Supply only MS Supporting clamp complete all as specified and directed.
Collecting of Water sample from different location of every qtr under Ordinance Depote in the special sterilized container and submit to Govt. approved test laboratory for chemical analysis for following parameter complete all as specified and directed by Engineer-In-Charge. (a) Aarsenic & Iron (b) Flouride (C) Turbidity (d) Chloride (e) Total Hardness (f) Nitrate (g) Total Coliform
Opening of the first top cover from the sump and pumping out all dirt water from sewage sump,Blocking the sewage line to sump providing jute bags at first manhole and cleaning the sump thoroughly with the help of wire brush after removing the sludge/silt and other foreign materials complete removing the blockage from sump complete of any capacity including removing the sludge from the pump house premises and depositing away from cantonment area complete all as specified and directed by Engineer-In-Charge.
Supply, laying, connecting and testing of ductile iron pipe 150 DN with spigot and socket ends class K-9 in standard working length conforming to IS-8329-2000 laid in trenches as in repair complete all as specified and directed.
Supply, laying, connecting and testing of ductile iron pipe 100 DN with spigot and socket ends class K-9 in standard working length conforming to IS-8329-2000 laid in trenches as in repair complete all as specified and directed.
INDIA ELECTRICAL EQUIPMENTS
M/S S. K. SARKAR
SANTOSH INTERNATIONAL
MARUTI ENTERPRISES
SPECIAL CONCRETE AND CONSTRUCTION CO.
Globe Electricals
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .