Improvements to Shahapur city main road and Electrification work in Shahapur Taluka, Yadgir District. (Under 4059-60-051-0-60-132 Chief Ministers Infrastructure Development Programme (CMIDP) for the 2025-26)

SHAHAPUR CITY BT ROAD

Clearing and Grubbing Road Land. Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earli...

Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacte...

Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and te...

Construction of Subgrade and Earthen Shoulders

Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading,...

By Plant Mix Method

Construction of Granular Sub-Base of required grading as per design mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers wi...

A Wet Mix Macadam (Plant mix method) Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanica...

A Prime Coat over WMM/WBM

(i) Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate...

Tack coat on Bituminous surface Providing and applying tack coat with VG-10 Bitumen using pressure distributor at the rate of 0.20 kg/m2 on the prepared bitumenous surface cleaned with mechanical broo...

Bituminous Macadam Grading - II for traffic 20 MSA C) Providing and laying Bituminous Macadam with 40/60 TPH capacity hot mix plant using crushed aggregates of specified grading premixed with bitumino...

Semi Dense Bituminous Concrete Providing and laying Semi Dense Bituminous Concrete with 40/60 TPH capacity hot mix plant batch type using crushed aggregates of specified grading premixed with bitumino...

Direction and Place Identification Signs with size more than 0.9 m2 size Board. Providing and erecting direction and place identification retro reflectorised sign as per IRC:67:2012 made of high inten...

Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectoris...

Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever nec...

Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever nec...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading,...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...

Additionalitiesfor Form Work and Centring, & Scaffolding charges for Drain

Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment/wing wall/ return wall with PVC Pipe 110mm outer dia at 2 kg per m2, extending through the full width of the structure with sl...

Drainage Spouts using 100 mm GI pipe complete as per drawing and Technical specificationMORTH Specification No. 2705

Supplying, fitting and placing TMT FE 550 /550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying...

Additionalitiesfor Form Work and Centring, & Scaffolding charges for Cement Concrete Drain Walls (35 Percentage)

ESTIMATE OF BOX CULVERT 1 V, (3 m x 1.5 m) WIDENING 4.0M EACH SIDE

Mechanical Means: -In all kinds of soils Depth upto 3m Earth work excavation for Foundation by mechanical means for

all works & depth upto 3 m, as per drawing and technical specifications, including s...

Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub

structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...

Additionalities for Form Work and Centring, & Scaffolding charges for Box Culvert

Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed

graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...

Additionalities for Form Work and Centring, & Scaffolding charges for Box Culvert

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water

works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...

Additionalities for Form Work and Centring, & Scaffolding charges for Box Culvert

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water

works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...

Additionalities for Form Work and Centring, & Scaffolding charges for Box Culvert

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement

including cost of all materials, machinery, labour, cleaning, straightening,

cutting, bending, hooking, laping/welding joints, tyin...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement

including cost of all materials, machinery, labour, cleaning, straightening,

cutting, bending, hooking, laping/welding joints, tyin...

PCC M15 Grade leveling course below approach slab complete as per drawing and Technical specification MORTH

Specification No. 2700

Reinforced cement concrete M30 grade for approach slab including reinforcement and formwork complete as per

drawing and Technical specification (Batching Plant). MORTH Specification No. 1500,1600 1700...

Providing and laying Cement concrete wearing coat M-30 grade including reinforcement complete as per drawing and

Technical Specifications. (Batching Plant) MORTH Specification No. 2702

Back filling behind abutment, wing wall and return wall complete including compaction as per drawing and Technical

Specification A. Granular materialc Reference to MORTH Specification No. 710.1.4 of I...

Providing and laying of Filter media with granular materials/ stone crushed aggregates satisfying the requirements laid

down in clause 2504.2.2. of MORTH specifications to a thickness of not less than...

Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment/wing wall/ return wall with PVC Pipe

110mm outer dia at 2 kg per m2, extending through the full width of the structure with sl...

Construction of RCC railing of M30 Grade in-situ with 20 mm nominal size aggregate, true to line and grade, tolerance

of vertical RCC post not to exceed 1 in 500, centre to centre spacing between vert...

Filler Joint (iii) Providing and fixing in position 20 mm thick premoulded joint filler in expansion joint for fixed ends of

simply supported spans not exceeding 10 m to cater for a horizontal movemen...

Drainage Spouts using 100 mm GI pipe complete as per drawing and Technical specificationMORTH Specification No.

Electrical Poles & Transformer Shifting

200006-PSC Pole-9.0M Long,200 kg WL

200105-RCC Pole-9.0M Long,145 kg WL

27901205-11 kV Horizontal cross arm wit

2811101-Guy with Complete set

281683-Spiral Earth Electrode

283005-11kV Pin Insulator (Shell onl

283040-DISC Insulators 45kN

283055-11kV Pin Insulator (G.I Pin o

284108-Rabbit ACSR Conductor

Loading & unloading of 9 mtr RCC/PSC poles

Releasing & Restringing/Tightening of loose spans b) Rabbit

Erection of RCC/PSC poles 9 to 10 mtr long but in a pit of 1.8 mtr depth

Loading & unloading of 9 mtr RCC/PSC poles

Fixing of V Shape/Horizontal cross arm including single top support Braces and Insulators fixing.

Releasing Of Fixing of V Shape/Horizontal cross arm including single top

support Braces and Insulators fixing.

a) Fixing of GUY Sets with break insulators making use of 7/3.15 mm

(7/10 SWG) galvanised steel wire with turn buckle and anchoring

arrangement as per approved drawing. (Excluding excavation of PIT)

providing spiral earth electrode type earthing along with pole (without charcoal, salt etc.,)

For Rabbit ACSR

2791002-DP Structure with 9 Mtrs RCC P

281008-8 SWG G.I.Wire

281110-7/10 SWG Guy Wire

2811101-Guy with Complete set

2811103-Earthing Materials Type for gr

284503-LT Spacer for TC Wiring

285557-120Sq.mm (P.G. Clamps Rabbit

288532-120 Sq.mm Copper terminals

301107-L.T.Protection kit

302122-11kV Class, Solid core

303200-L.A. 9kV, 5kA, Metal Oxide

304212-11kV G.O.S 200A Single break

82193002-A1 Lead Wire - 120 Sqmm

Wiring of One circuit of LT Wiring Kit for for 25/63/100 KVA DTC to

the existing LT protection Kit Kit / Distribution Box via metering box.

b) Erection of 100 kVA Transformer on Transformer structure.

b) Relesing of 100 kVA Transformer on Transformer structure.

Construction of platform (1.5x1.5x1.2) mtr in size stone, for erection of

transformers/Heavy equipment including all materials

Erection of pole 100 to 250 kVA with 9 mtrs. RCC pole

Releasing Of (a) Wiring of One circuit of LT Wiring Kit for for 25/63/100 KVA

DTC to the existing LT protection Kit Kit / Distribution Box via metering box

Releasing Of Fixing DOLO cutouts / Horn Gap Fuses including fixing of cross arms and wiring

Releasing Of Fixing of LT Protection Kit

Releasing Of Ordinary Soil

Releasing Of pole 100 to 250 kVA with 9 mtrs. RCC pole

Releasing Of Ordinary Soil

Same as above using RCC poles 9 mtr to 10 mtr long

a) Fixing of GUY Sets with break insulators making use of 7/3.15 mm (7/10 SWG) galvanised steel wire with turn buckle and anchoring arrangement as per approved drawing. (Excluding excavation of PIT)

Providing GI Pipe Earthing for lightning arresters Transformer Neutral and Transformer Metal parts (Excluding digging of pits)

Fixing of LT Protection Kit

Fixing DOLO cutouts / Horn Gap Fuses including fixing of cross arms and wiring

Fixing of 3 Nos lightning arrestors including wiring.

Fixing of GOS including wiring (11kV SB 200A)

Releasing Of Fixing of GOS including wiring (11kV SB 200A)

Erection of 25-63 kVA Transformer on Transformer structure.

Releasing Of Loading of Transformer 25 kVA

Releasing Of Stringing of 1.1kV grade aerial bunched 3 core cable of XLPE insulation standard aluminum conductor, standard around a weather resistant black XLPE insulated AAA messenger wire (size 3x70...