Road Safety and road Furniture works on NH-24 to Police Training School Via Sadar Bazaar in Distt- Sitapur

Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface. (Repeated Bar/Transverse Bar Marking) Providing and laying of hot applied thermoplastic compound 15 mm thick including reflectorising glass beads @ 500 gms per sqm area, thickness of 5 mm is exclusive of surface applied glass beads as per IRC:35-2015. The finished surface to be level, uniform and free from streaks and holes. Morth-803 (8.13)-Base.

Providing and laying bituminious concrete with Batch type hot mix plant producing 120 TPH using crushed aggregates from Kabrai quarry of specified grading, premixed with bituminous binder VG_30 @ 5.4%, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, tandem roller and Pneumatic Tyre roller to achive the desired compaction as per MORTH & H Specification Clause 507 complete in all respects

Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface. Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area. thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35-2015 The finished surface to be level, uniform and free from streaks and holes.

Supply and fixing of Retro reflective high intensity informatory sign board etc. As per MoRTH- Specification on each side (1.20x0.90)

Supply, fixing & eraction of built up Cantilever Structure 6 m span comprising of one vertical posts of 6.00 M height made up of 300 mm NB heavy class MS pipe as vertical member welded with 10 mm MS plate at top & 12 mm M S plate at bottom. The horizontal Truss shall comprise of 50 mm dia heavy class M.S. pipe and 40 mm dia heavy M S pipe as bracing & 10 mm MS plate at bottom for fixing to vertical post as per structure design & drawing with one of steel primer and two coats of synthetic enamel plant. The work includes construction of RCC Foundation of size 90x90M of required depth as per site condition for built up structure including Earth work in excavation 100 mm thick Lean Concrete in 1:4:8 cement coarse sand and 40 mm gauge stone ballast. RCC withand 1:2:4 cement coarse sand and 20 mm stone grit including supply and fixing of 25 mm dia Foundation Bolts 600 mm long as per provision of structure design including cost of reinforcement & shuttering. The lateral vertical clearances and complete. nstallation work shall be as per relevant clauses of MORT&H specification section 800 and IRC 67 2010 complete in all respect The Rates shall include cost of design fabrication, supply, transportation, Local shifting Erection of Signage structure using crane, inclusive of all taxes royalty, VAT etc. all T&P machine, material and labour required for proper completion of work as per direction of Engineer-in-charge.

Providing and Fixing of reflective signs with a corrosion resistant 4mm thick aluminium composite panel face to be fully covered with high intensity prismatic sheeting type IV as per IRC-67-2010 retro reflective sheeting with MS angle frame of 35x3

Please Enable Macros to View BoQ information