Electrical arrangements for : a)Provision of facilities for Divyangjan at 9 No. of Stations in ADENJTJ Subdivision. AB,VN,GYM (NSG 5), KDY,VGM,PCKM,MPI & VLT (NSG 6), MEH (HG 3). b)Provision of facilities for Divyangjan at 10 No of Stations in AJJ-CGL Section. CJ(NSG4),TMLP, WJ, PALR(NSG6), TKO,NTT, PYV, VB, RDY (HG3),CJE (HG1). c)Provision of facilities for Divyangjan at 11 stns ( WJR,SHU,KVN, LTI, SVUR, THL, TUG, CTRE,MCN, AVN & VJ) in ADEN/KPD subdivision)

Schedule () 01-ELECTRIFICATION WORKS (NOTE:-(1) THE UNIT RATE TO BE QUOTED SHOULD BE INCLUSIVE OF ALL TAXES AND GST APPLICABLE FROM TIME TO TIME. (2) GST RULES WILL APPLY FOR THE E-TENDER. (3) THE SUPPLY OF GOODS AND SERVICE WOULD BE SUBJECT TO GST ACT AND RULES APPLICABLE FROM TO TIME. (4) For materials of purchase value Rs.5 lakhs and above, inspection shall be done by third party i.e. M/s. RITES and all expenditure in connection with the inspection shall be borne by the tenderer/Contractor . For ISI marked products, if the order is placed on ISI certified manufacturers, the materials can be accepted on firm's WTC.6) Please 3597832.00 refer to clause number 9 in General instructions to tenderers attached in Documents Section regarding Site Engineer condition 7)All accessories and items required for successfull erection/installation ,testing, commissioning of all schedule items as per site conditions is covered under contractor's scope of work 8)All items required for all schedule items where wiring and cabling is to be terminated at both incoming ends for successful installation/erection, testing and commissioning commissioning is covered under contractors scope of work. Above/

Atleast 6m away from track centre within railway land by saw cutting/breaker as per site conditions to avoid any damage to nearby site complete in a manner as directed by the Section Engineer in charge at site. Above/

ar 02 CHENNAI DIVISION-ELECTRICAL/SOUTHERN RLY 02 Description:- Supply and provision of mass concrete for platforms or elsewhere with 1:2:4 ratio using 20mm graded blue metal complete in a manner as directed by the Section Engineer in chargeat site. NOTE: i)Cement shall be Ordinary Portland Cement, 43 grade, conforming to IS: 456 or latest. ii)Proper compaction of cement concrete shall be ensured as per standard industrial practices. iii)The finished level should match with surface level properly Above/

threading through pipe, clamping on walls and terminating in as many ends using suitable single compression cable glands, lugs , sockets and other items required complete as per site conditions in a manner complete as directed by Section Engineer in charge at site. Note:- 4Cx16 sq.mm LTUG Aluminium Cable alone will be supplied departmentally. Above/

ar Description:- Laying of 63 mm dia High Density Polyethylene pipes in the excavated trench,

arrangements and couplers and other accessories required at appropriate locations as per site conditions so that cable can be easily inserted and removed wherever need arises complete in a manner as directed by Senior Section Engineer-in-charge at site. Note: 63mm dia HDPE pipe alone will be supplied departmentally. Above/

ar Description:- Installation, Testing and commissioning of 45 W LED street fittings using suitable GI

supply connection from ceiling rose/junction box or elsewhere by using 3 core 1.5 sq. mm Fire retardant low smoke PVC insulated, PVC round sheathed copper [White/Ivory colour] conductor flexible chord conforming to IS:694/1990 or latest as per industrial standards in a manner as directed by Section Engineer in charge at site. Note: 45W LED street light fittings alone will be supplied departmentally Above/

ar Description:- Installation,Testing and commissioning of 4 feet 30W LED light fitting Batten type suitable to work on 240V single phase 50 Hz AC with lamp and all standard accessories using

from ceiling rose by using 3 core 1.5 sq. mm Fire Retardant Low Smoke PVC insulated, PVC round sheathed copper [White/Ivory colour] conductor flexible pendant chord conforming to IS:694/1990 or latest complete as per industrial standards and in a manner as directed by Senior Section Engineer in charge at site. Note: 4 feet LED 30W light fitting Batten Type with lamp alone will be supplied Departmentally Above/

ar Description:- Installation,Testing and commissioning of 4 feet 20W LED light fitting Batten type suitable to work on 240V single phase 50 Hz AC with lamp and all standard accessories using

from ceiling rose by using 3 core 1.5 sq. mm Fire Retardant Low Smoke PVC insulated, PVC round sheathed copper [White/Ivory colour] conductor flexible pendant chord conforming to IS:694/1990 or latest complete as per industrial standards and in a manner as directed by Senior Section Engineer in charge at site. Note: 4 feet LED 20W light fitting Batten Type with lamp alone will be supplied Departmentally Above/

ar Description:- Installation, Testing and commissioning of the 300mm sweep BLDC Exhaust fan onto

industrial practices including supply connection from ceiling rose by using 3 core 1.5 sq. mm fire retardant Low smoke PVC insulated, PVC round sheathed copper [White / Ivory colour] conductor flexible pendant chord conforming to IS:694/1990 or latest complete as per industrial standards and in a manner as directed by Senior Section Engineer in charge at site. Note: 300mm sweep BLDC Exhaust fan alone will be supplied departmentally. Above/

ar CHENNAI DIVISION-ELECTRICAL/SOUTHERN RLY

buildings or elsewhere using suitable clamping and fixing arrangement complete as per industrial practices including supply connection from ceiling rose by using 3 core 1.5 sq. mm fire retardant Low smoke PVC insulated, PVC round sheathed copper [White / Ivory colour] conductor flexible pendant chord complete in a manner as directed by Senior Section Engineer in charge at site. Note: 1200mm sweep BLDC Ceiling fan alone will be supplied departmentally. Above/

ar Description:- Supply and Drawing of inside mains using 2 runs of 2.5 sq. mm [from MCB DB to

retardant Low smoke PVC insulated unsheathed multi-stranded copper conductor cables conforming to IS:694/1990 or latest duly inside the PVC conduit concealed / laid vide item No. 12 below complete as per the specification enclosed and in a manner as directed by Senior Section Engineer in charge at site. Note: - 2 runs of 2.5 sq. mm copper conductor are taken as 1m for quantity purpose Above/

insulated [green colour] unsheathed single copper conductor cables conforming to IS:694/1990 or latest duly along wires vide item No.10 above and from MCB DB to switch boards and switch boards to light and fan points or elsewhere in a manner as directed by Senior Section Engineer in charge at site. Above/

ar Description:- Supply and Concealing of 25mm dia rigid PVC conduits [IVORY colour] along with all

elsewhere and making good the same including replastering and painting wall to original condition /cIamped at regular intervals, not exceeding 500 mm in a manner as directed by Section Engineer in charge at site and as per specification for wiring/ rewiring enclosed. [Approximate length of PVC conduit] Above/

ar Description:- Installation, Testing and commissioning of SMC box assembly similar to Sintex

carriers onto lamp posts or elsewhere suing suitable clamping arrangements complete and in a manner as directed by Section Engineer incharge at site Note: SMC GSJB-1414 box, strip connector , neutral link, Earth link ,Fuse bases and fuse carriers, MS clamping arrangements alone will be supplied Departmentally. Above/

ar Description:- Supply of modular frame plate with matching cover plate suitable for 8 modules duly accommodated onto suitable modular switch board box made of 1.2mm thick GI Sheet complete and

cutting/ chipping/ making recess on the wall or elsewhere and painting etc., complete including fixing ,testing and commissioning of Switches and sockets supplied vide Item No's 17 below arrangements including all internal wiring connections in a suitable manner as directed by Section engineer in charge at site. Note: - 1 No. 8 Module frame plate with matching cover plate and 1 No. Modular GI box are taken as 1 No for quantity purpose Above/

ar Description:- Supply of modular frame plate with matching cover plate suitable for 4 modules duly accommodated onto suitable modular switch board box made of 1.2mm thick GI Sheet complete and

cutting/ chipping/ making recess on the wall or elsewhere and painting etc., complete including fixing ,testing and commissioning of Switches and sockets supplied vide Item No's 17 below arrangements including all internal wiring connections in a suitable manner as directed by Section engineer in charge at site. Note: - 1 No. 4 Module frame plate with matching cover plate and 1 No. Modular GI box are taken as 1 No for quantity purpose Above/

ar CHENNAI DIVISION-ELECTRICAL/SOUTHERN RLY Description:- Supply of modular frame plate with matching cover plate suitable for 2 modules duly

recess mounting/ concealing the same onto the wall using suitable fixing arrangements including cutting/ chipping/ making recess on the wall or elsewhere and painting etc., complete including fixing ,testing and commissioning of Switches and sockets supplied vide Item No's 17 below arrangements including all internal wiring connections in a suitable manner as directed by Section engineer in charge at site. Note: - 1 No. 2 Module frame plate with matching cover plate and 1 No. Modular GI box are taken as 1 No for quantity purpose Above/

Description:- Supply of 6A modular switches conforming to IS: 3854/ 1997 or latest in a manner as directed by Section Engineer-incharge at site. Above/

elsewhere using suitable angle iron frame work and mounting and fixing arrangements as per industrial standards including all wiring and cable termination works at both Incoming and outgoing sides complete in a manner as directed by Section Engineer in charge at site. Note: 25A ,DP,RCBO with Enclosure alone will be supplied Departmentally Above/ Square

Foot ar Description:- Erection testing and commissioning of wall / hanging /floor mounting type Non illuminated sign /direction boards in Full elliptical /haIf elliptical/semi elliptical shape and Flat (single side/ double side). The display sheet shall be of unbreakable 040 translucent polycarbonate sheet of

colour text and graphics shall be printed / router cut on monomeric calendered vinyl of 70 um thickness and shall be firmly pasted on display sheets. The mounting arrangement shall be hanging, wall mounting, ceiling mounting, pole mounting or floor mounting and as per site requirement. The signage shall have the integral mounting arrangements with sturdy structural frame and ACP cladding on the back side of the signage to avoid rusting and entry of dust. The LED board shall have uniform Illumination Note: Single side/Double Side Signage boards alone will be supplied Departmentally Above/

ar Description:- Installation, Testing and commissioning of time switch assembly comprising of: - a)1 No. timer switch with daily setting similar to L&T catalogue reference J648B1 [FM1 Quartz]. b)1 No. 3 pole 25A power contactor conforming to IS: 13947/P4/1993 or latest, c)1 No. 40A DP [MCB type]

Suitable rated control fuses all duly pre-wired and mounted on an appropriate sized well-seasoned wooden plank of thickness not less than 12 mm and duly housed into and powder coat finished enclosure of size not less than 300mm X 450mm X 300mm and made of 2mm thick Sheet Steel complete and provision of the same onto the wall or elsewhere using suitable fixing arrangements complete and in a manner as directed by Section Engineer in charge at site. Note: Timer switch, Power contactor, MCB, Neutral Link, Earth link, fuses, wooden box, Enclosures alone will be supplied Departmentally. Above/

ar Description:- Installation, Testing and commissioning of Call Bell similar to Gold Medal Make and

suitable arrangement including supply connection from ceiling rose by using 3 core 1.5 sq. mm Fire retardant Low Smoke PVC insulated, PVC round sheathed copper (White/Ivory colour) conductor flexible pendant chord in a manner as directed by Section Engineer in charge at site. Note: Call Bell alone will be supplied Departmentally Above/

ar 22 CHENNAI DIVISION-ELECTRICAL/SOUTHERN RLY Description:- Installation, Testing and commissioning of 4 feet 20W inverter type LED light fitting Batten type suitable to work on 240V single phase 50 Hz AC with lamp and all standard accessories using suitable mounting and fixing arrangement as per industrial practices including supply connection from ceiling rose by using 3 core 1.5 sq. mm Fire Retardant Low Smoke PVC insulated, PVC round sheathed copper [White/Ivory colour] conductor flexible pendant chord conforming to IS:694/1990 or latest complete as per industrial standards and in a manner as directed by Senior Section Engineer in charge at site. Note: 4 feet 20W Inverter type LED light fitting Batten Type with lamp alone will be supplied Departmentally Above/

ar D e s c r i p t i o n : - Installation, Testing and commissioning of TPN MCB DB's with 40A/63A/100A,FP,RCBO/MCCB/RCCB as Incomer along with combination of SP/DP/FP,MCB's as feeder

including cutting/chipping and re-plastering and bringing back walls to original condition including painting the walls to original condition complete including all wiring and termination works at both incoming and outgoing ends complete and as per industrial practices in a manner as directed by Senior Section Engineer in charge at site. Note: MCB DB,MCB, RCBO, Cable adaptor box etc alone will be supplied Departmentally Above/

elsewhere using suitable angle iron frame work and mounting and fixing arrangements as per industrial standards including all wiring and cable termination works at both Incoming and outgoing sides complete in a manner as directed by Section Engineer in charge at site. Note: 32A, FP, MCB with Enclosure alone will be supplied Departmentally.