Construction of Community Hall at South Ext in Kameshwar Mandir ward no 52

Amount

Earth work in Bulk excavation by mechanical means (Hydrolic Excavators) over areas exceeding 30cm in depth, 1.5m in width as well as 10 m2 on plan)including disposal of excavated earth lead upto 50 meters and lift upto 1.5m as directed by Engineer in charge All kind of soil.

Providing & laying in position cement concrete of specified grade including curing but excluding the cost of centring & shuttering –All work up to plinth level1:4:8(1Cement: 4 Coarse sand: 8 graded stone agg. 40mm nominal size).

Providing & laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centring , shuttering, finishing and reinforcement-All work up to plinth level.1:1.5:3(1 Cement: 1.5 Coarse sand: 3graded stone agg. 20mm nominal size).

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Steel Reinforcement for R.C.C. works including straightening, cutting, bending, placing in position and binding all complete above plinth level mild steel and medium tensile steel bars.

Centering & shuttering including strutting propping etc. & removal of form for: Foundations, footings, bases of columns etc for mass concrete.

Centering and shuttering including strutting, propping etc. and removal of form for Columns, pillars, piers, abutments, posts and struts.

Centering and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platforms

Supply and filling RBM including watering, ramming, dressing and carriage, lead and lift complete job.

Supplying and filling in plinth with fine sand under floors including, watering, ramming, consolidating and dressing complete.

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in Cement mortar 1:6 ( 1 cement : 6 coarse sand) including Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level.

12mm Cement Plaster of 1:6 mix (1 cement : 6 fine sand).

15mm Cement plaster on the rough side of single or half brick wall of mix : 1 : 6 ( 1 cement : 6 fine sand).

6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand)

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.2 mm thick

Painting with silicon and acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces: Two coat

Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm)

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. Complete 50 mm thick with 20mm nominal size stone aggregate.

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours and shades, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement and matching pigments etc. complete. Size of tile 600x600 mm.

Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Area of slab over 0.5 sqm) 18 mm.

Providing & fixing of anodized aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular and other sections of approved make conforming to IS: 733 and IS: 1285, anodized transparent or dyed to required shade according to IS: 1868. (Minimum anodic coating of grade AC15), fixed with raw plugs and screw or with fixing clips, or with expansion holder, at top, bottom and sides with required PVC/ neoprene felt etc. Aluminum sections shall be smooth, rust free, straight, miterd and jointed mechanically wherever required including cleat angle aluminum sna1.54 p beading for glazing / paneslling, C.P brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge.(inclusive glazing 5mm float glass as aneling complete job) including work.

Providing and fixing Anodized aluminum (Anodized transparent or dyed to required shade according to IS: 1868 minimum anodic coating of Grade AC 15) sub frame work for windows and ventilators with extruded built up standard tubular sections of approved make conforming to IS: 733 and IS: 1285 fixed with dash fastener of required dia and size (dash fastener to be paid separately).

Providing and fixing aluminum casement windows fastner of required length for aluminum windows with necessary screws etc. Complete Anodized (AC 15) aluminum.

Providing and fixing aluminum round shape handle of outer dia 100mm with SS screws etc. Complete as per direction of Engineer-in-charge 1 Anodized (AC 15) aluminum

Steel work welded in built up sections/framed work including cutting hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bars, ladders, railings, brackets, gates and similar works

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying Ceramic glazed floor tiles 300x300 mm (thicknessto be specified by the manufacturers) of 1st quality conforming to IS:15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4( 1 cement : 4 coarse sand) including pointing the joints with whitecement and matching pigment etc., complete. In colour such as White, Ivory, Grey, Fume Red Brown

Providing and fixing Anodized aluminum grill (Anodized transparent or dyed to required shade according to IS: 1868 minimum anodic coating of Grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing windows frame with C.P. brass/stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixingapproved Anodized aluminum standard section around the opening, all complete as epr requirement and direction of Engineer-in-charge. (only weight of grill to be measured for payment)

Providing and Fixing of white vitreous china pedestal type water closet (European type W.C.pan) with seat and lid.10 liter low level white P.V.C. Flushing cistem,including flaush pipe with manually controlled device (handle lever ) conforming to IS.7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI Marked White Solid Plastic Seat And Lid.

Providing and fixing wash basin with C-I brackets.15mm dia CP Brass single hole basin mixer of approved quality and make ,including painting of fittings and brackets, cutting and making good the walls wherever required (a) White vitreous China wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer.

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

Providing and fixing 8mm dia C.P//S.S . Jet with flexible tube upto 1 mtr long with S.S. Triangular plate to European type W.C.of quality and make as approved by Engineer-in – charge .

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete 40mm dia.

Providing and fixing 100mm sand cast iron grating for gully trap.

Providing and fixing in position 25mm diameter mosquito proof coupling of approved municipal design.

Providing and fixing 600x450 mm beveled edge mirrior of superior glass (of approved quality ) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete .

Providing and fixing 600x120x5mm glass shelf with edges round off supported on anodized aluminium angle frame with C.P.Brass brackets and guard rail complete fixed with 40 mm long screws,rawl plugs etc complete.

Providing and fixing toilet paper holder C.P.Brass.

Providing and fixing PTMT liquid soap container 109 mm wide 125 mm high and 112 mm distance from wall of standard shape with brackets of the same materials with snap fittings of approved quality and colour weighing not less than 105 gms.

Providing and fixing PTMT towel ring trapezoidal shape 215 mm long 200mm wide with a minimum distance of 37 mm from wall face with concealed fittings arrangements of approved quality and colour weighing not less than 88 gms.

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with C P .Brass screws with concealed fitting arrangement of approved quality and colour : 450mm long towel rail with total length of 495 mm 78 mm wide and effective height of 88 mm ,weighing not less than 170 gms.

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.Internal work-Exposed on wall 15 mm dia. nominal bore.

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.Internal work-Exposed on wall 20 mm dia. nominal bore.

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.Internal work-Exposed on wall 25 mm dia. nominal bore.

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.Internal work-Exposed on wall 32 mm dia. nominal bore.

Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing Tee, including cutting and threading the pipe etc. complete 25 to 40 mm nominal bore

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 25 mm nominal bore.

Providing and fixing gun metal non-return valve of approved quality (screwed end) 25 mm nominal bore

Providing and fixing gun metal non-return valve of approved quality (screwed end) 32 mm nominal bore

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work) 20 mm nominal bore

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work) 25 mm nominal bore

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work) 32 mm nominal bore

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931

Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931

Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-incharge.

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size),inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5.

Supplying and fixing C.I. cover without frame for manholes: 455x610mm rectangular C.I. cover (light duty) the weight of the cover to be not less than 23 kg.

Supplying and fixing C.I. cover 300x300 mm without frame for gully trap (standard pattern) the weight of cover to be not less than 4.5kg.

Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished with a floating coat of neat cement and making necessary channels for the drain etc. complete For pipes 100 to 250 mm diameter.

Making soak pit 2.5 m diameter 3.0 meter deep with 45x45 cm dry brick honey comb shaft with common burnt clay (non modular) bricks of class designation 7.5 bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.

Supplying ,providing and fixing floor trap of superior quality supreme, Prince ,Finolex as per directions of engineer in charge at site.

10cm thick (average) mud phaska of damped brick earth on roofs laid to slope consolidated and plastered with 25 mm thick mud mortar mixed with bhusa at 35kg per cum of earth and gobri leaping with mix 1:1 (1 clay: 1 cow dung) and covered with specified tile bricks grouted with cement mortar 1:3 (1 cement: 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement and finishing neat. With common burnt clay (non modular) brick tiles of class designation 10.0

Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement: 3 fine sand) as per standard design. In 75x75mm deep chase.

Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement: 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.

Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. (i) Single socketed pipes 110 mm diametre

Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. (i) Single socketed pipes 150 mm diametre

Providing and fixing on wall face un-plasticized - PVC moulded fittings/accessories for un plasticized Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.75 mm bend

Providing and fixing on wall face un-plasticized - PVC moulded fittings/accessories for un plasticized Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.110 mm bend

Providing and fixing PTMT Ball cock of approved quality, colour and make complete with epoxy coated aluminium rod with L.P/H.P.H.D plastic balls. 15mm nominal bore, 105mm long, weighing not less than 138gms.

Providing and fixing of 1 HP Moter of superior quality Crompton, Havells or equivalent as per directions of engineer in charge

Providing Soil bearing capacity test and structural steel design with provision of two storeys duly approved by the competent authority.

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution boards on surface/in recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) (HPL,Havells/Anchor/I.A/Legrand/Standard) 8 way (4 + 24), 415 volts,three phase and neutral DD.

Wiring for light point/ fan point/ exhaust fan point/ call bellpoint with 1.5 sq.mm FRLS PVC insulated copper conductorsingle core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet,suitable size M.S. box and earthing the point with 1.5 sq.mm.FRLS PVC insulated copper conductor single core cable etc. as required . Group A Make of conduit anchor, Gupta,Havells. Make of Wire Havells,Anchor,Kei. Make of Switch Anchor , Havells, L & T.

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required . Group B Make of conduit anchor, Gupta,Havells. Make of Wire Havells,Anchor,Kei. Make of Switch Anchor , Havells, L & T.

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required . Group C Make of conduit anchor, Gupta,Havells. Make of Wire Havells,Anchor,Kei. Make of Switch Anchor , Havells, L & T.

Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. 1. 5/6 Amp switch Make of conduit anchor, Gupta,Havells. Make of Wire Havells,Anchor,Kei. Make of Switch Anchor , Havells, L & T.

Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. 5/6 amps switch . a) 15/16 Amp switch Make of conduit anchor, Gupta,Havells. Make of Wire Havells,Anchor,Kei. Make of Switch Anchor , Havells, L & T.

Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. 5/6 amps switch . a) 3 pin 5/6 Ampsocket outlet Make of conduit anchor, Gupta,Havells. Make of Wire Havells,Anchor,Kei. Make of Switch Anchor , Havells, L & T

Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. 5/6 amps switch . a) 6 pin 15/16 Amp socket outlet Make of conduit anchor, Gupta,Havells. Make of Wire Havells,Anchor,Kei. Make of Switch Anchor , Havells, L & T

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. a) 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire Make of conduit anchor, Gupta,Havells. Make of Wire Havells,Anchor,Kei. Make of Switch Anchor , Havells, L & T

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. a) 2 X 4 sq. mm + 1 X 4 sq. mm earth wire Make of conduit anchor, Gupta,Havells. Make of Wire Havells,Anchor,Kei. Make of Switch Anchor , Havells, L & T

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required a) 3 Module

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required b) 6 Module

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required c) 12 Module

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.

Supplying and fixing brass batten / angle holder including connection etc. as required.

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 Volt , on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 16 way , Double door anchor,havells,bajaj.

Supplying and fixing 5 Amp to 32 Amp rating, 240/415 Volt, 10 KA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole Havells,Anchor , L&T.

Supplying and fixing following rating, double pole/single pole and neutral, 240 Volt, in the existing MCB DB complete with connections, testing and commissioning etc. as required. a) 40 Amp. Havells,Anchor, L&T.

Supplying and fixing following rating, double pole/ single pole and neutral 240 V, in the existing MCB DB complete with connections, testing and commissioning etc. as required a) 63 Amp. Havells,Anchor, L&T.

Supplying, installation, testing & commissioningof 12 watt surface mounted LED based light Havells,Syska,Jaquar.

Supplying, installation, testing & commissioningof 20 watt 4 feet tube fitting LED based light Havells,Syska,Jaquar.

Sitc of flood light of 90 watt with high pressure die cast housing with lens (IP65 PROTECTION) Syska, Bajaj, Havells.

Sitc of 1200mm ceiling fan with suitability of 240 volt,50 hz,5 amp make anchor , bajaj, usha.

Sitc of Iron Type exhaust fan pf 450mm sweep (Usha, Bajaj , Anchor)

Supply and fixing of 09 Watt led based bulb, Syska,Phillips, Bajaj.

Supply and laying of10 sqm twin core aluminium cable Havells,Kei, Anchor.

Providing and laying single core 1.5 sqm copper wire as inverter Anchor, Havells , Kei.

Providing and fixing of GI pipe complete With GI fitting of 25mm dia nominal bore

Refixing of precast cement concrete paver tiles flooring 60mm thick cement mortar 1:4 mix & joints to be filled with cement mortar 1:3 mix (Complete job) (Old available tiles).

Dismentailing of precast Cement Concrete old existing paver tiles of 60 mm thick cement mortar (Complete job)

Carriage of materials by all means including loading/ unloading & stacking complete. Sand

Carriage of materials by all means including loading/ unloading & stacking complete Stone aggregate below 40mm Nominal size .

Carriage of materials by all means including loading/ unloading & stacking complete. Bricks.

aditya puri

M/S RICKY LANGER GUPTA

M/S ROHIT BADYAL

Raman Sharma