Repair to departmental water tanker Nos. JK02BV-2150 and inspection vehicle Bolero No JK02CG-4184

Repair to departmental tanker No. JK02BV-2150 by way of repairs to rear leaf spring assembly by way of dismantling by cutting of centre bolt by gas cutter, and removing of damaged items, and P/F of new items in place defective items, Rear leaf spring R/H 3rd – 01 no, rear leaf spring L/H main – 01no, Rear leaf spring L/H 2nd – 01 no, centre bolt-03 no’s, leaf spring bush – 04nos, leaf spring pin – 04 no’s, U bolt – 02 no’s, U Clamp – 02 no’s, Spring shackle-01 no, grease nipple-02 no’s. Job also includes retensioning of all leaf spring by hammering to the optimum curvature, assembling of leaf spring assy, fitting and alignments of front and rear leaf spring assy., and all allied works. Job includes P/F of spares /material in place of defective/ worn out clutch system by way of dismantling of clutch system with P/F of new parts i.e. Clutch plate-01 no., Pressure plate-01 no, clutch release bearing-01 no., Clutch paddle bush-01 no, shaft bolt-05 no.Job also includes repair to Self of the vehicle by way of dismantling of Self starter for repairs with P/F of new parts in place of defective parts i.e Self carbon brush set-01 set, Field coil -01 set, bendix drive-01 no., petrol for cleaning of parts, self solenoid switch-01 no., and voltage regulator-01 no. and complete checking & fitting after repair. Job also includes repairs to propeller shaft by way of Dismantling, extraction of worn-out parts and replacement with p/f of new parts i.e. UJ cross-02 no., Half yoke-02 no’s, cross holder-01 no, Slip and yoke teeth set-01 set, coupling nut/ bolt-04 no assembling and alignment of propeller shaft. Job also includes providing and fitting of new battery in place of old battery. Complete job including cost of material and labour charges and all taxes.

Repair to Deptt. Inspection vehicle bolero No. JK02CG-4184 by way of Repair to Four wheel system of the vehicle by way of dismounting of wheels and removal of worn out parts. Providing and fitting of new brake lining rear :01 set for each rear wheel along with rivets ,and Disc pad-01nos set for each front wheel , Oil Seals (Front & Rear-4 nos.), wheel bearings Front & Rear (both inner & outer), Axle Gasket-2 no. and allied parts by replacing the damaged ones ,Grease -03KG. wheel spring -02 nos. Job includes Repair to the radiator of the vehicle by way of dismounting it from the vehicle, dismantling it, cleaning of fins & tubes ,soldering of fins & tubes where ever required , joining of cracked corner to prevent water leakage., reassembling and fitting the radiator to the vehicle filling of coolant . Job includes repair to fuel pump and Injector by ways of dismantling it & extracting of worn out parts and p/f of new one in place of old one. P/F of complete overhauling kit to pump, re-assembling of pump, setting of pressure of nozzles and calibration of fuel pump. Job includes P/F of new clutch plate assembly in place of old worn out/defective part. Job also includes P/F of new seat covers in place of old one’s. Complete job includes the cost of material and labour charges.