Pending work in FSTP unit of waste water treatment plant

Pending work in FSTP unit of waste water treatment plant

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs,

saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of

unserviceable ...

Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonry

including rounding off corners wherever required smooth rendering, providing and removing

scaffolding, includi...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm

having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2

conforming to IS 2...

Providing and fixing factory made precast RCC perforated drain covers, having concrete of

strength not less than M-25, of size 1000 x 450x50 mm, reinforced with 8 mm dia four nos

longitudinal & 9 nos ...

Providing and Filling in foundation with granite / trap broken metal 100mm. and down size & with

approved sand including hand packing, ramming, watering, including cost of all materials and

Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying

to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at

Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying

to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at

Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying

to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at

Supply and delivery at site special moulded variety PVC tee as per IS 7834/ 1987 and fabricated as

per IG124/ 1984 with ISI mark with its latest amendments 10.10.1 dia PVC Tee TEE 160mm

Supply and delivery at site special moulded variety PVC tee as per IS 7834/ 1987 and fabricated as

per IG124/ 1984 with ISI mark with its latest amendments 10.10.1 dia PVC Tee TEE 110mm

Supply and delivery at site special moulded variety PVC elbows as per IS 7834/ 1987 and fabric

Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm

(inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm

thick with 1:3:6, plaster...

Dismantling of cement concrete platform along with curtain walls and base concrete etc. including

stacking of useful materials near the site and disposal of unserviceable materials to 320 x 120 cm

Supply and delivery at site GM (copper alloy) gate valves confirming to Class-I as per IS 778 with

latest amendments, 1 No. screwed in bonnet inside screw, rising spring spindle integral seat

Supply and delivery at site GM (copper alloy) gate valves confirming to Class-I as per IS 778 with

latest amendments, 1 No. screwed in bonnet inside screw, rising spring spindle integral seat

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates

etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and

Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar

works etc. in layers not exceeding 20cm in depth, consolidating each depth

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even

shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust,

mortar drops an...

Providing and laying in position Cement Concrete for levelling course for all works in foundation.

The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS