SITC of MS chequered plate form over the newly constructed sump at Khanyar scheme 320 KVA DG set and other allied works details as per the technical annexure

Providing, installation, testing & commissioning of diesel generating set suitable for operation at site with rated output of 320 KVA. The DG set shall be compliant with latest CPCB norms and shall comprise of a silent, eco-friendly diesel engine and an alternator close coupled and mounted on a common base frame along with standard accessories within acoustic enclosure & rated for continuous duty with overload provision of 10% for running electrical induction motor with different capacities coupled to sewage / drainage pump as well as illumination system. The DG set shall be providedalong 285 Sq mm 3.5 core Alcabling from D.G set to main MCC panel, earthling as per OEM recommendations. The job includes P/L of RCC foundation block as per OEM recommendations along with CGI roofing. Make (Cummins/Caterpillar/Kirloskar/equivalent) Technical Specifications as per Annexure-A

Providing, fabrication erection of MS working plate form over the main pumping sump. The MS frame is to be fabricated out of ISMB,ISMC and angle iron.The frame is to be covered by MS chequered plate 6mm thick and the openings at the requisite places are to be fabricated with hinge mechanism for the lifting and lowering of the pumping units duringmaintenance. Fabrication and erection of MS ladder 6 mtr long to be erected inside the sump. All the steel structures are to be provided with Two coats of steel primer and one coat of Paint. The details of ISMB, ISMC, Angle iron and chequered plates are as under. i. ISMB 250=20 [email protected] Kg/RM=746 kg ii. ISMC 150=40 RM @16.8Kg/RM=672 kg iii. ISA 80= 20 [email protected] Kg/M=196 kg iv. ISA 65=30 RM @5.80Kg/RM=174 kg v. Chequered Plate 6 mm=50SM @47.10Kg/SM=2355kg Total weight=4143 kg Technical Specifications as per Annexure-A

Providing, fabrication erection of MS trash guard for the main pumping sump. The MS frame is to be fabricated out of, ISMC and angle iron and flat iron of requisite size and specification. The job also includes P/F of ISMB 300 at the bottom of sump for resting of the motors of submersible pumps.All the steel structures are to be provided with Two coats of steel primer and one coat of Paint. Total weight=1750 kg Technical Specifications as per Annexure-A

Supply, installation, testing and commissioning of submersible type pump sets with motors, SS guide Rails, submersible cable (Power cable, control cable, instrumentation cable each 100-meter length), ultrasonic level transmitter (0-10 Mtr), soft starter panel, duck foot pedestal etc Type of pump: Non clog centrifugal volute type sewage submersible Pumps Capacity= 300 M3/Hr Head = 20 meters or above Motor rating = 40-50 H.P 1450 rpm Make (Kirloskar/Xylum /Granfoss/Equivalent). Technical Specifications as per Annexure-A

Providing fitting and testing of MS rising main 450 mm dia 5.4 mm thickness.

Providing fitting and testing of MS rising main 200 mm dia 5.4 mm thickness from IPS to main sewage sump of STP. The job includes P/F of MS bends, fabrication of easy bends, flanges, rubber gaskets nut and bolts etc for successful execution of work at site.

Providing fitting and testing of MS rising main 100 mm dia 5.4 mm thickness. The job includes P/F of MS bends, flanges etc for successful execution of work at site.All the steel structures are to be provided with Two coats of steel primer and one coat of Paint.

Providing fitting and testing of 200 mm dia D.I.sluice valves.

Providing fitting and testing of 100 mm dia D.I.sluice valves.

Providing fitting and testing of 200 mm dia D.I.Non return valves.