Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹35.9 LAccepted-AOC | L1 | Accepted-AOC BEING LOWEST | |
| 2 | L2₹42.6 L+₹5.8 L (15.8%)Rejected-Finance | L2 | Rejected-Finance BEING OTHER THAN LOWEST | |
| 3 | L3₹46.6 L+₹9.8 L (26.5%)Rejected-Finance A 47D RAM DUTT ENCLAVE UTTAM NAGAR NEW DELHI 110059 | WEST | DELHI | 110059 | L3 | Rejected-Finance BEING OTHER THAN LOWEST | |
| 4 | L3₹48.3 L+₹11.4 L (31.1%)Rejected-Finance 1ST FLOOR H NO 165 GALI NO 16 S B S COLONY KARAWAL NAGAR DELHI EAST DELHI DELHI 110094 | NORTH EAST DELHI | DELHI | 110094 | L3 | Rejected-Finance BEING OTHER THAN LOWEST | |
| 5 | L5₹50.0 L+₹13.2 L (35.9%)Rejected-Finance | L5 | Rejected-Finance BEING OTHER THAN LOWEST |
Tender Value
₹49.6 L
EMD Value
₹99,140
Closing Date
3 Mar 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (EAST) DELHI CANTT-10
GE (EAST) DELHI CANTT-10
PERIODICAL SERVICES TO COMMON AREA OF CERTAIN BLDG INCL MISC B/R AND E/M WORK AT MANEKSHAW MARG OFFRS ENCLAVE UNDER AGE B/R-I UNDER GE (EAST) DELHI CANTT-10
2023_MES_578816_1
GE/DE-97/2022-23
Open Tender
Civil Works
Item Rate
180 days
GE (EAST) DELHI CANTT-10
Class D Cat a (i)
8 documents required · 8 mandatory
₹500
Yes
GE (EAST) DELHI CANTT-10
₹99,140
Yes
24 Mar 2023
3 Feb 2023
6 Mar 2023
3 Feb 2023
3 Mar 2023
17 Feb 2023
Amount
Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water etc.
M&L for 15 mm thick cement plaster in cement mortar 1:6 on brick or concrete surface etc. on wall finished even and smooth without using extra cement, all as specified .
M&L for 10 mm thick cement plaster in cement mortar 1:3 on brick or concrete surface etc. on ceiling finished even and smooth without using extra cement, all as specified .
Removing existing paint by scrapping with TruCare Wall Sander: L-01/H-01(having mechanical vaccum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint etc by skilled labour on wall/ceiling surface or preparation of new surface of wall complete all as specified and directed Note: The work will also include execution of work in High rise bldgs and cost of necessary T&P, scaffoling shall deemed to be included in unit Quoted rates.
M&L providing and applying waterproof cement based putty @ 1kg (undiluted) per sq mtr of average thickness 1mm, of Asian paints or its equivalent over the plastered/old painted wall after scrapping to prepare the surface even and smooth on wall/ceiling surface complete all as specified and directed. Step 1 : Mix the putty powder by adding 40-50% water and mix it with Asian Paints or equivalent as per list of makes Trucare Putty mixer (Trucare Putty mixer with min 1400W power having mixer rod of industrial steel grade 45 with the mixing capacity of min 2.5kg putty per minute).. Step 2 : Allow 6-8 hrs time to dry the putty surface. Note: The work will also include execution of work in High rise bldgs and cost of necessary T&P, scaffoling shall deemed to be included in unit Quoted rates.
Sanding of the putty surface with Asian Paints or equivalent as per list of makes Tru Care Wall Sander: L-01/H-01(having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint etc by skilled labour on wall/ceiling surface complete all as specified. Note: The work will also include execution of work in High rise bldgs and cost of necessary T&P, scaffoling shall deemed to be included in unit Quoted rates.
M&L providing and applying one coat of acrylic waterbased interior/exterior grade primer @ 0.8ltr (undiluted)/10Sqm diluted with water in 1:1 ratio to be applied. Allow 6-8hrs to dry the surface for painting of subsequent quotes etc by skilled labour on wall/ceiling surface complete all as specified. Note: The work will also include execution of work in High rise bldgs and cost of necessary T&P, scaffoling shall deemed to be included in unit Quoted rates.
M&L providing and applying two coats of smooth acrylic emulsion with rich matt finish(interior grade) having voc less than 50 grams per ltr complying leed criteria @ 1ltrs (undiluted)/10Sqm diluted with water in 2:1 ratio applied over priming coat. Allow 6-8hrs to dry the surface for painting of subsequent quotes etc by skilled labour on wall/ceiling surface complete all as specified.. Note: The work will also include execution of work in High rise bldgs and cost of necessary T&P, scaffoling shall deemed to be included in unit Quoted rates.
M&L preparation of old/new decorated internal wall/ceiling surface by sand paper of required sizes, filling in wall care putty in potholes existing again sand papering thus prepairing surface smooth to recieve further finishes complete all as specified and all as directed.
Applying one coats of Smooth Acrylic emulsiom on ceiling surface complete all as specified and directed. (Note : Finishing coat to applied with roller).
M&L preparation of old painted wood or wood based surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed.
M&L preparation of old painted steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed.
M&L cleaning of tiling work in floors and walls using suitable chemical or solvent as per manufacturer''s instructions duly taking care not to damage glaze of tiling work, including necessary filling of joints/grouting with white cement and removing any loose debris or dirt etc. complete all as specified and as directed by Engr-in-Charge.
Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.50 sqm each complete all as specified
All same as per srl item No 14 here-in-before but size of opening exceeding 1.5 Sqmtr but not exceeding 4 Sqmtr
S&F powder coated three track aluminium (glazed/ gauged) window shutters sliding type with/without AC opening(with shutter) incl 3mm thick glass or stainless steel wiremesh, without sash bar aluminium saction weighting 0.55 Kg per mtr including necessary joining cleats, glazing clips, rubber packing, anodised aluminium beading , sliding channel,roller screws including frame/fittings complete all as per direction of Engr-in-charge. Note: The work will also include execution of work in High rise bldgs and cost of necessary T&P, scaffoling shall deemed to be included in unit Quoted rates.
S&Faluminium anodized grills with 6mm x 5mm aluminium section having square gap of 100mm thk with fixing arrangement complete all as specified and directed
S&F in repair galvanised mild steel wire cloth 0.56 mm nominal dia of wire of average width of aperture 1.18mm fixed with tinned tacks or galvanised wire staple (Note- Shall be fixed to Iron windows with welding/wooden doors with beading etc)
Hacking out old broken glass (any thickness size, quality or description) from wooden/ steel frames glazed with putty or fixed with wooden beads/metal pins complete.
S&F sheet glass ordinary quality and glazing with oil putty in square n. exc 0.50 Sqm in each pane 3 mm thick all as specified
M&L rubber door seal 32mm wide with Aluminium strip of size 19mm wide fixed with machine steel screw with washer complete
M&L for preparation of old/new decorated internal wall/ceiling surface by sand paper of reqd sizes, filling in wall care putty in potholes existing again sand papering thus prepairing surface and applying two coat of White wash/colour wash in garrages complete all as specified and all as directed.
M&L for 18-20mm thick Granite (of any type) work (table rubbed and polished) in steps, riser, jambs, pillars, window cills, cooking plateforms,dado/wall and like in over and incl 15mm thick cemnet mortar (1:6) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl moulding/rounding on edges incl dismantling old stone slab complete
M&L for machine cut Kota stone one piece 18 to 20 mm thick slab flooring, steps etc 18 to 20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, rounding on edges laid over and incl 15mm thick screed bed in CM 1:4 incl dismantling old stone complete all as specified and directed.
M&L for machine cut kota stone slab one piece 18 to 20 mm thick as in riser of steps, skirting, dado etc laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of slone slab including rubbing and polishing, laid over and incl 15 mm thick rendering in CM 1:4 incl dismantling old stone complete all as specified and directed.
M&L cutting shrubs wild gorwth/trees and removing complete vegetation growth from external walls and roof of multistorey building including taking out roots from roof, brick wall or concrete surfaces and making good the distrubed surfaces with PCC 1:2:4 type B-0, using 12.5mm graded crushed stone aggregate and disposing the rubbish from the site (MOD land) for a block up to 9 storey, complete all as specified. (Note : Rate in this item include cutting tress and shrub in each block any number of time during the currency of contract.)
M&L taking Down Cement plaster/duster bed PCC of column, chajja , paraphet of roof, facia, drops, ceiling etc and making good with cement plaster 10mm thick in CM 1:3 with PCC 1:2:4 (average thickness of PCC 25 mm) as required brushing neat cement slurry wwith 3.0 kg of cement per sq metre including necessary form work and scaffolding upto 9nd floor including fixing of wire netting where required to match the existing surface
Taking down old unserviceable point wiring from existing conduit / batten type (light point) the material from site and making good the disturbed surface complete all as directed.
Taking down tube light /Ceiling, bulk head light fittings any size and type.
Taking out old pressed steel box any size and type along with bakelite sheet with switches any size for taking credit complete all as directed.
Material and labour of point wiring complete1.5 Sq mm (nominal area) FRLS PVC insulated un-sheathed and multistranded copper conductor wire ISI marked in exisiting conduit FRLS PVC insulated unsheathed 1.5 Sqmm copper conductor mulistranded earth wire, connecting to common earth dolly controlled by one 1-way switch complete all as directed.
S & F Modular switch 6 Amp, 1 way, 1 module size complete all as directed.
S&F Modular bell push 6 Amp, 1 way, 1 module size complete all as directed.
S&Fof Modular Metal Flush Box 1/2 module duly embedded in wall in cement mortar 1:4 after chase cutting/cutting of wall tile or marble with cutter and matching/making good the existing surface
S&F of Modular Metal Flush Box 3 module duly embedded in wall in cement mortar 1:4 after chase cutting/cutting of wall tile or marble with cutter and matching/making good the existing surface
S&F of Modular Metal Flush Box 4 module duly embedded in wall in cement mortar 1:4 after chase cutting/cutting of wall tile or marble with cutter and matching/making good the existing surface
S&F Modular white cover plate with frame 1 module complete all as directed.
S&F Modular white cover plate with frame 2 module complete all as directed.
S&F Modular white cover plate with frame 3 module complete all as directed.
S&F Modular white cover plate with frame 4 module complete all as directed.
Supply and fixing LED luminaire 1'x1' 18W square,cool/warm,surface type with high efficiency PMMA diffuser soft glare free light complete with inbuilt driver including connecting up with specified and directed at site by Engineer-in-Charge.
Supply and fixing of LED ceiling light fitting 10 watt, in round shape, surface type cool/warm white as per site requirement and making all electric connections complete all as directed.
S&F of LED bulk head fitting 10 watt made of cast aluminium alloy with opal glass diffuser complete all as specified and directed.
Supply and fixing in replacement of self cosing louver for 300 mm sweep exhaust fan including making good disturbed surfaces all complete all as directed.
Taking down unserviceable panel of any size and any type
S&F in replacement of TPN DB 04 way double door confirming to IP 43 & IK 09 protection complete with din rail, Neutral and Earthing bar after taking out the old unserviceable DBs, connection complete and making good the disturbed surfaces.
S&F in replacement of isolator, 4 pole, 63 Amp, 415 Volt.complete all as directed.
S&F in replacement of MCB SPN 40 to 63 Amp,10 kA, , with over load and short circuit protection complete all as directed.
M&L in replacement XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 25 sqmm 4 Core on wall with clamp specified and directed at site by Engineer-in-Charge.
M&L in replacement submain wiring complete with 2 x 16 sqmm (nominal area) FRLS, PVC insulated, unsheathed and multistranded copper conductor cable ISI marked, and 1 x 16 sqmm as earth wire in existing conduit and fittings complete all as specified and as directed
M&L for earthing complete with GI earth plate electrode 600mmx600mmx6mm thick buried directly in ground not less than 2.25mtrs below ground level, with top edge of the plate not less than 1.5mtrs deep below normal ground level, connected to galvanised earth wire 4mm by means of bolts, nuts to earth test point incl necessary PCC 1:2:4 type B-1, cover frame, GI pipe 15mm dia light grade for protection of earthing lead and GI pipe 20mm dia medium grade for watering pipe with funnel, wire mesh, salt, charcoal dust and exc complete all as specified and as directed directed.
Supply and fixing of 25mm dia PVC Conduit exclusive of boxes (junction /terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixig accessories such as couplers,lock nuts, saddles, pipe hooks etc complete all as specified and as directed directed.
GAUTAM ELECTRIC WORKS
Akhil Enterprises
R. S. Associates
DEV CONSTRUCTION
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .