REPAIR/ MAINT OF CERTAIN STEEL FURNITURE AT AEC TRG COLLEGE AND CENTRE PACHMARHI.

Amount

DRG No. FD-243, 1031, 1032 REPAIR TO STEEL ALMIRAH LARGE/ MEDIUM Removing of old existing unserviceable lock and S&F new lock of 6 levers with two keys Godrej pattern with fittings complete all as specified & directed.

DRG No. FD-243, 1031, 1032 REPAIR TO STEEL ALMIRAH LARGE/ MEDIUMRemoving of old unserviceable handle and S&F new handle chromium plated screw type tightened with nuts and bolts with fittings complete all as specified and directed.

DRG No. FD-243, 1031, 1032 REPAIR TO STEEL ALMIRAH LARGE/ MEDIUMRemoving of unserviceable 3 way lock device with steel rod and supplying and fixing new three way locking device with 10 mm dia MS steel rods and brass shackle complete with fixing accessories for large steel almirah all as directed.

DRG No. FD-243, 1031, 1032 REPAIR TO STEEL ALMIRAH LARGE/ MEDIUMDescription all as per item No 3 above but for medium steel almirah.

DRG No. FD-243, 1031, 1032 REPAIR TO STEEL ALMIRAH LARGE/ MEDIUMRemoving of unserviceable leg and S&F new legs of 16 gauge MS sheet complete including one coat of synthetic enamel paint over a coat of red oxide primer all as specified and shown on drawing for almirah large/ medium.

DRG No. FD-243, 1031, 1032 REPAIR TO STEEL ALMIRAH LARGE/ MEDIUMRemoving of unserviceable shelves of almirah large steel and supplying and fixing new MS sheet shelves made out from 20 gauge PBI sheet including one coat of synthetic enamel paint over a coat of red oxide primer and fixing complete with required clamps all as directed.

DRG No. FD-243, 1031, 1032 REPAIR TO STEEL ALMIRAH LARGE/ MEDIUMDescription all as per item No 6 here-in-before but for Almirah Medium Steel

DRG No. FD-243, 1031, 1032 REPAIR TO STEEL ALMIRAH LARGE/ MEDIUM Removing of unserviceable shutter of almirah large steel and supply and fixing new MS sheet shutter made out from 20 gauge PBI sheet including one coat of synthetic enamel paint over a coat of red oxide primer and fixing complete with mild steel hinges all as specified & directed.

DRG No. FD-243, 1031, 1032 REPAIR TO STEEL ALMIRAH LARGE/ MEDIUM Description all as per item No 8 above but for almirah medium

DRG No. FD-243, 1031, 1032 REPAIR TO STEEL ALMIRAH LARGE/ MEDIUM Removing of unserviceable lock cover plate of almirah med/large and supply and fixing new MS sheet lock cover plate made out from 20 gauge PBI sheet including one coat of synthetic enamel paint over a coat of red oxide primer and fixing complete with screw bolts all as directed.

DRG No. FD-243, 1031, 1032 REPAIR TO STEEL ALMIRAH LARGE/ MEDIUM Removing of unserviceable key plate and supplying & fixing new C P key plate with screw bolts all as directed.

DRG No. FD-243, 1031, 1032 REPAIR TO STEEL ALMIRAH LARGE/ MEDIUMS&F clamps of suitable size with nuts and bolts with washers for shelves of almirah duly painted with one coat of synthetic enamel paint over a coat of red oxide primer all as specified and directed.

DRG No. FD-243, 1031, 1032 REPAIR TO STEEL ALMIRAH LARGE/ MEDIUM Removing of all dents, filling with putty and applying one coat of synthetic enamel paint (1st quality) for steel almirah large all as specified and directed.

DRG No. FD-243, 1031, 1032 REPAIR TO STEEL ALMIRAH LARGE/ MEDIUMDescription all as per item No 13 above but for almirah medium

DRG No. FD-75(M) REPAIR TO CHAIR CBO STEEL WITH ARMS AND WITHOUT ARMS Removing of old existing unserviceable Seat frame and S&F new seat frame of 2nd class hard wood fixed with 04 Nos. machine screws 65 mm x 3 mm including canning with superior quality of plastic cane and applying two coats of French polish in black colour on wooden surfaces of chair CBO steel without arms complete all as specified and directed.

DRG No. FD-75(M) REPAIR TO CHAIR CBO STEEL WITH ARMS AND WITHOUT ARMS Description all as per item No 15 above but chair CBO steel with arms

DRG No. FD-75(M) REPAIR TO CHAIR CBO STEEL WITH ARMS AND WITHOUT ARMSDescription all as per item No 15 above but back frame of chair CBO steel without arms.

DRG No. FD-75(M) REPAIR TO CHAIR CBO STEEL WITH ARMS AND WITHOUT ARMS Description same all as per item No 15 above but back frame of chair CBO steel with arms.

DRG No. FD-75(M) REPAIR TO CHAIR CBO STEEL WITH ARMS AND WITHOUT ARMS Removing of old existing unserviceable arms and S&F new arm rest of 2nd class hard wood fixed with suitable size of screws including two coats of French polish in black colour complete all as specified and directed.

DRG No. FD-75(M) REPAIR TO CHAIR CBO STEEL WITH ARMS AND WITHOUT ARMSRemoving of old existing unserviceable flat iron runner and S&F new flat iron runner 25 x 3 mm, approximate 500 mm long including making holes for fixing end and other end welded to chair CBO steel without arm/with arms including one coat of synthetic enamel paint over a coat of red oxide primer on steel surfaces complete all as specified and directed.

DRG No. FD-75(M) REPAIR TO CHAIR CBO STEEL WITH ARMS AND WITHOUT ARMS Removing of old U/S PVC caps & shoes and S&F new PVC caps & shoes of chair CBO steel without arms/ with arms complete all as specified and directed.

DRG No. FD-75(M) REPAIR TO CHAIR CBO STEEL WITH ARMS AND WITHOUT ARMSDescription all as per item No 22 above but chair CBO steel with arms

DRG No. FD-84 (M) ,FD-1004, FD-1003REPAIR TO STEEL TABLE OFFICE OFFICER/ CLERK Removing of existing unserviceable table top and supplying & fixing new table top 18 mm thick pre-laminated particle board teak finished on one side and another side white exterior grade, PVC moulded beading with screws and adhesive on all sides for officers table Make-Novapan/Bhutan Board/Eco Board/Action Tesa

DRG No. FD-84 (M) ,FD-1004, FD-1003REPAIR TO STEEL TABLE OFFICE OFFICER/ CLERKDescription all as per item No 24 above but table clerk steel.

DRG No. FD-84 (M) ,FD-1004, FD-1003REPAIR TO STEEL TABLE OFFICE OFFICER/ CLERK Removing of old existing unserviceable drawer and M&L for new drawer made of 20 gauge PBI sheet for table officer/ clerk all as specified and shown on drawing and as directed.

DRG No. FD-84 (M) ,FD-1004, FD-1003REPAIR TO STEEL TABLE OFFICE OFFICER/ CLERK Removing of existing unserviceable lock and S&F new lock with two keys suitable for above table, Godrej pattern all as shown on drawing and as directed.

DRG No. FD-84 (M) ,FD-1004, FD-1003REPAIR TO STEEL TABLE OFFICE OFFICER/ CLERK Removing of old wornout shoe and S&F new hard rubber shoe of best quality complete all as shown on drawing and as directed.

DRG No. FD-84 (M) ,FD-1004, FD-1003REPAIR TO STEEL TABLE OFFICE OFFICER/ CLERK Removing of old existing unserviceable decayed leg of table office officer/clerk and S&F new 25 Sqmm MS 16 gauge conduit pipe including welding and one coat of synthetic enamel paint over a coat of red oxide primer all as shown on drawing and as directed.

DRG No. FD-84 (M) ,FD-1004, FD-1003REPAIR TO STEEL TABLE OFFICE OFFICER/ CLERK M&L for painting with one coat of synthetic enamel paint (olive green ) including removing all dents filling with putty and preparation of surfaces for table officer/ clerk all as directed .

DRG No. FD-1027 REPAIR TO FORM WITH OUT BACK/WITH BACK Removing old U/S planks of any description and in any position and S&F new 1st class hard wood shisham seat plank of size 1525 mm x 300 mm x 25 mm thick for form without back fixed with 6 Nos bolt 08 mm dia, 65 mm long nuts with washers including two coats of french polishing to new wooden surface including preparation of new surfaces complete all as specified and directed.

DRG No. FD-1027 REPAIR TO FORM WITH OUT BACK/WITH BACK Description all as per item No.37 above but seat plank of size 1800 mm x 300 mm x 25 mm thick for form with back.

DRG No. FD-1027 REPAIR TO FORM WITH OUT BACK/WITH BACK Removing of old U/S back plank of form with back in any position and S&F new 1st class hard wood (Shisham) back plank of size 1800 mm x 150 mm x 25 mm thick fixed with and including 9 Nos 6 mm dia, 65 mm long bolts with nuts & washer made to shape, fixed in position including two coats of french polishing to new wooden surfaces complete all as specified and directed.

DRG No. FD-1027 REPAIR TO FORM WITH OUT BACK/WITH BACK Removing of old U/S MS sheet seat of form w/o back steel and S&F 20 gauge PBI sheet seat made to shape as required including welding complete approx size 1525 mm x 300 mm including one coat of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surfaces all as specified and directed.

DRG No. FD-1027 REPAIR TO FORM WITH OUT BACK/WITH BACK Removing of old U/S legs stiffener/back & bottom stiffener of form w/o back steel and form with back and S&F new legs stiffener of 25 mm dia/square 16 gauge MS conduit pipe made to shape, size as required at site welded to old frame work complete including one coat of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surfaces all as specified and directed.

DRG No. FD-1027 REPAIR TO FORM WITH OUT BACK/WITH BACK Removing of old U/S clamps and S&F new clamps of MS flat iron 40 mm x 3 mm length as required at site made to shape fixed with suitable nuts and bolts and washers, fixed in position including one coat of synthetic enamel paint over a coat of red oxide primer including preparation of new surfaces all as specified and directed .

DRG No. FD-1027 REPAIR TO FORM WITH OUT BACK/WITH BACK Preparation of old surfaces of broken joints and providing running welding for jointing MS conduit pipe, MS angle and flat iron etc complete all as specified and directed ( Each joint measured separately).

DRG No. FD-1027 REPAIR TO FORM WITH OUT BACK/WITH BACK Removing of old U/S shoes/Caps and S & F new PVC hard rubber shoe/Caps of best quality to conduit pipe legs of form with or without back all as specified and directed

DRG No. FD-1027 REPAIR TO FORM WITH OUT BACK/WITH BACK M & L for one coat of synthetic enamel paint to steel surfaces including preparation of surfaces all as specified and directed .

DRG No. FD-106(M), 1037 REPAIR TO STEEL RACK ADJUSTABLE 3 TIER Removing of U/S steel shelves and S&F new shelves of size 3` x 1.5` made out of 20 gauge PBI sheet including fixing complete by means of bolting/welding or riveting etc including one coat of synthetic enamel paint over a coat of red oxide primer all as specified and directed.

DRG No. FD-106(M), 1037 REPAIR TO STEEL RACK ADJUSTABLE 3 TIER Description all as per item 46 above but shelves of size 3` x 1`-3``

DRG No. FD-106(M), 1037 REPAIR TO STEEL RACK ADJUSTABLE 3 TIER Description all as per item No. 46 here-in-before but shelves of size 3.5` to 4`.0 x 1.5`

DRG No. FD-106(M), 1037 REPAIR TO STEEL RACK ADJUSTABLE 3 TIER Dismantling/taking down old U/S leg of rack steel and S & F new leg of MS slotted holes steel angle iron 40 x 40 x 4 mm and fixed complete by means of bolting/welding or riveting etc including one coat of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surface all as specified and directed.

DRG No. FD-106(M), 1037 REPAIR TO STEEL RACK ADJUSTABLE 3 TIER S&F mild steel corners made out from M.S. sheet 3 mm thick size 75 x 75 mm in triangular shape fixed complete by means of welding/bolting or riveting as per site requirement including one coat of synthetic enamel paint over a coat of red oxide primer all as specified and directed.

DRG No. FD-106(M), 1037 REPAIR TO STEEL RACK ADJUSTABLE 3 TIER M&L for one coat of synthetic enamel paint including preparation of surfaces and removal of all dents, filling with putty complete all as specified and directed (Rack steel open type).

DRG No. FD-106(M), 1037 REPAIR TO STEEL RACK ADJUSTABLE 3 TIER Description all as per item No 44 above but rack steel close type

DRG NO,FD-75(M) REPAIR OF CHAIR REVOLVING M&L for repair & replacement of the following components of chair revolving/tilting complete all as directed by Engineer-in-Charge :- Removing of existing old worn out/unserviceable tapestry cloth, foam, etc seat and providing new tapestry cloth over new polyurethane foam cushion 75mm thick, 40 density and long cloth fixing snape and all as shown on drg

DRG NO,FD-75(M) REPAIR OF CHAIR REVOLVING Removing existing old worn out/unserviceable tapestry cloth from back and providing new tapestry cloth, over new polyurethane foam cushion 50mm thick 32 density and long cloth as directed by Engineer-in-Charge.

DRG NO,FD-75(M) REPAIR OF CHAIR REVOLVING Removing old broken/worn casters wheels(not less than 50mm Dia) and supply and fixing new castels as existing & as directed by EIC

DRG NO,FD-75(M) REPAIR OF CHAIR REVOLVING Removing existing broken arm handles and supply and fixing new arm handle as existing and as directed by Engineer-in-Charge.

DRG NO,FD-75(M) REPAIR OF CHAIR REVOLVING Removing existing old broken lifting mechanism and supply and fixing new lifting mechanism incl steel spring as per existing and as directed by Engineer-in-Charge.

DRG NO,FD-75(M) REPAIR OF CHAIR REVOLVING Removing existing broken/worn out shaft and supply and fixing new shaft as existing & directed by E-in-C

DRG NO,FD-75(M) REPAIR OF CHAIR REVOLVING Removing existing worn out old bal bearing base and supply and fixing new ball bearing base of same size as directed by Engineer-in-Charge.

DRG NO,FD-75(M) REPAIR OF CHAIR REVOLVING Removing existing locking key of shaft and supply and fixing new locking as existing and as directed.

DRG NO. FD-1029 REPAIR TO LOCKER BED SIDE STEEL Taking down old U/S shutter and S&F new shutter of PBI sheet 20 gauge as per existing shape and size including one coat of red oxide primer on both side of the shutter complete all as specified and directed.

DRG NO. FD-1029 REPAIR TO LOCKER BED SIDE STEEL Description all as per item No 54 above but back.

DRG NO. FD-1029 REPAIR TO LOCKER BED SIDE STEEL Description all as per item No 54 above but side.

DRG NO. FD-1029 REPAIR TO LOCKER BED SIDE STEEL Description all as per item No 54 above but partition

DRG NO. FD-1029 REPAIR TO LOCKER BED SIDE STEEL Description all as per item No 54 above but shelves

DRG NO. FD-1029 REPAIR TO LOCKER BED SIDE STEEL Description all as per item No 54 here-in-before but legs.

DRG NO. FD-1029 REPAIR TO LOCKER BED SIDE STEEL Taking down old U/S Hasp and stapple and S&F new MS Hasp and stapple chromium plated as per existing shape and size complete all as specified and directed.

DRG NO. FD-1029 REPAIR TO LOCKER BED SIDE STEEL Taking down old U/S Handle and S&F new MS chromium plated steel Handle 100mm size complete all as specified and directed.

DRG NO. FD-1029 REPAIR TO LOCKER BED SIDE STEEL M&L for painting with one coat of synthetic enamel paint on old/new surfaces of locker bed side steel, internally and externally including preparation of old/new surface complete all as specified and directed.

DRG NO- FD-259 REPAIR TO CHAIR VERANDAH STEEL Removing/ Taking down unservicveable cane from chair verandah and weaving with plastic cane 4 to 5mm wide half round superior quality of approved make complete in matt pattern including painting to frame of chair with one coat of white synthetic enamel paint including preparation of old painted steel surfaces complete all as specified and directed.

DRG NO- FD-259 REPAIR TO CHAIR VERANDAH STEEL Removing broken legs and S&F new legs made to shape as front leg arm and rear leg complete one piece of 18/19 mm dia MS conduit pipe of 1.6 mm thickness including all necessary welding and painting with two coats synthetic enamel white paint over a coat of red oxide primer on new steel surface and one coat of white enamel paint over old steel painted surfaces including preparation of surfaces complete all as specified and directed.

DRG NO- FD-259 REPAIR TO CHAIR VERANDAH STEEL Removing old U/S PVC shoes and supply and fixing new PVC shoes of suitable size complete all as specified and directed.

DRG NO. FD-220 REPAIR/REWEAVING OF CHARPOY GI PIPE Dismantling /taking down of existing unserviceable newar from GI pipe charpoy and weaving with and including supply of superior quality of nylon newar 50mm to 55mm wide of weight not less than 1.50 Kg per charpoy and shall be closely woven both ways all as specified and shown on drawing, including tightening the elbows Checknut & legs etc in the true position complete all as specified and directed.

DRG NO. FD-220 REPAIR/REWEAVING OF CHARPOY GI PIPE Dismantling/taking out carefully of old existing unserviceable Newar from GI Charpoy and replaced with S&F new ply of 12mm thick ply wood commercial grade BWR with and including two numbers middle support of flat iron 35x6mm thick of equal size to be welded on long rail of charpoy with and including 8 Nos L type 75mm long bracket made of flat iron 35x6mm, welded to each short and long rail 150 mm fromcorner made to same shape and size as shown on drawing including two coat of synthetic eanmel paint over a coat of pink primer to flat iron and bracket complete all as specified and directed by Engr-in-Charge. Make- Kitply/Sudarshan Plywood Klokata /Century

DRG NO. FD-220 REPAIR/REWEAVING OF CHARPOY GI PIPE Removing of unserviceable long rail of charpoy GI pipe and supplying and fixing new long rail made out from 32 mm dia GI tubing medium grade ISI marked threading at both ends of shape and size as per existing long rail of charpoy GI Pipe complete all as specified and shown on drawing MAKE : SURYA/JINDAL/TATA

DRG NO. FD-220 REPAIR/REWEAVING OF CHARPOY GI PIPE '-ditto- but short rail as per drg -ditto

DRG NO. FD-220 REPAIR/REWEAVING OF CHARPOY GI PIPE Cutting & threading 32mm GI Pipe both side end of unserviceable long rail obtained from items No 97 here in before and converted into Short rail as existing size and fixed to GI Charpoy complete all as specified and directed by Engr-in- Charge .

DRG NO. FD-220 REPAIR/REWEAVING OF CHARPOY GI PIPE Cutting & threading 32mm GI Pipe both side end of unserviceable short rail obtained from items No 86 here in before and converted into leg as existing size and fixed to GI Charpoy complete all as specified and directed by Engr-in- Charge .

DRG NO. FD-220 REPAIR/REWEAVING OF CHARPOY GI PIPE Removing of unserviceable legs of charpoy GI Pipe supplying and fixing of new leg out of 32mm dia GI Tubing medium grade of shape and size as per existing legs of charpoy GI pipe complete all as specified and shown on drawing.

DRG NO. FD-220 REPAIR/REWEAVING OF CHARPOY GI PIPE Removing of unserviceable check nut of G.I. charpoy and replacement with new GI Check nut, 9mm thick suitable for charpoy GI Pipe 32 mm bore pipe complete all as specified & directed.

DRG NO. FD-220 REPAIR/REWEAVING OF CHARPOY GI PIPE Removing of unserviceable elbow of charpoy GI pipe and S&F three way GI elbow 32mm bore medium grade, ISI marked complete all as Specified & directed.

DRG NO. FD-220 REPAIR/REWEAVING OF CHARPOY GI PIPE Replacing of new hard wooden block of size 35 x 35 x 40 mm shall be supply and fixed with one side of the leg all as directed by eingineer-in-charge .

NIHAL ENTERPRISES